Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"flush mount" Page 1 of 2

  • Chrome Plated Stainless Steel Flush Mount Fuel Fill
    Chrome Plated Stainless Steel Flush Mount Fuel Fill
    x
                

    This chrome plated stainless steel fuel fill can be flush mounted and includes a special opening key. Simple three hole mounting makes installation a snap.

    Use with 1-1/2" I.D. hose (sold separately).

  • Flush Mount Rear Axle Oiling Can
    Flush Mount Rear Axle Oiling Can
    x
                Rear end oiling can mounts flush on rear deck.  Aluminum, 24 oz. capacity.  7 1/2" tall, 3" diameter. Mounting flange is 8 1/2" diameter. AN 10 outlet.
            
  • Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    Hagan Street Rods fmTD39R-LED 1939 Ford Style Flush Mount LED Tail Lights
    x
                

    Hagan has made it simple to add a set of flush mount '39 Ford style LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 1/4" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Flush Mount LED Tail Lights Red Oval 4.5 x 1.5
    Hagan Flush Mount LED Tail Lights Red Oval 4.5 x 1.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4.5" x 1.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
    x
                

    This fabricated aluminum fuel cell is built for our 1923 T-bucket kits with a 20" pick-up box. Made from 5051 aluminum and tig welded for strength. Includes mounting tabs to make installation easy and it features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Measures 9-1/2" x 12-1/4" x 30-1/4". Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity. 

    This tank will NOT clear the deck lid when used in conjunction with a channeled Speedway body. It will work great with flat floor bodies. Use tank 715-752 if you have a channeled body. 

    • 30-1/4" long
    • 12-1/4" wide
    • 9-1/2" tall
    • 14 gallon
    • Built for our 1923 T-Bucket kits with a 20" pickup box
    • Should be used with the un-channeled bodies
    • Features a 240-33 ohm sending unit
    • Feature a flush mount fill neck/cap
    • Designed to be mounted to the left side, which leaves room for your battery
  • Hagan Street Rods fm4SSA-LEDH Flush Mount Tail Lights Amber Slot 4x.5
    Hagan Street Rods fm4SSA-LEDH Flush Mount Tail Lights Amber Slot 4x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    Hagan Street Rods fm8OVR-LEDH Flush Mount Tail Lights Red Oval 8 x 1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 8" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fmTD6R-LEDH Flush Mount Tail Lights Teardrop 6 x .75
    Hagan Street Rods fmTD6R-LEDH Flush Mount Tail Lights Teardrop 6 x .75
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x .75" x 0.25" thick
    • Steel face plate is 18 gauge mild steel
    • Boxes are 1-5/8" deep x 2" wide x 9" long

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    Hagan Street Rods fm10SSR-LEDH Flush Mount Tail Lights Red Slot 10x.5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 10" x .5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm4DSR-LEDH Flush Mount 4 Inch Tail Lights Red Dual
    Hagan Street Rods fm4DSR-LEDH Flush Mount 4 Inch Tail Lights Red Dual
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Lenses are spaced 0.5" apart
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm6SSR-LEDH Flush Mount Tail Lights Red Slot 6 x .5
    Hagan Street Rods fm6SSR-LEDH Flush Mount Tail Lights Red Slot 6 x .5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm6DSR-LEDH Flush Mount 6 Inch LED Tail Lights Red Dual
    Hagan Street Rods fm6DSR-LEDH Flush Mount 6 Inch LED Tail Lights Red Dual
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 0.5" x 0.25" thick
    • Lenses are spaced 0.5" apart
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm8SSR-LEDH Flush Mount Tail Lights Red Slot 8 x .5
    Hagan Street Rods fm8SSR-LEDH Flush Mount Tail Lights Red Slot 8 x .5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 8" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm4SSR-LEDH Flush Mount Tail Lights Red Slot 4 x .5
    Hagan Street Rods fm4SSR-LEDH Flush Mount Tail Lights Red Slot 4 x .5
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 4" x 0.5" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fm6OVR-LEDH Flush Mount Tail Lights Red Oval 6 x 1
    Hagan Street Rods fm6OVR-LEDH Flush Mount Tail Lights Red Oval 6 x 1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 6" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Hagan Street Rods fmTD9R-LEDH Flush Mount Tail Lights Red Teardrop 9x1
    Hagan Street Rods fmTD9R-LEDH Flush Mount Tail Lights Red Teardrop 9x1
    x
                

    Hagan has made it simple to add a set of flush mount LED tail lights to your street rod or custom. This complete kit includes lenses, boxes, LED lights, wiring, seals, mounting hardware, and a detailed instruction sheet on how to install step by step.

    • Installs in curved or flat surfaces, in steel or fiberglass vehicles
    • Designed to be sanded down to match the contour of your panel
    • Lenses are 9" x 1" x 0.25" thick
    • Steel face plate is 18 gauge mild steel
    • Boxes are 1-5/8" deep x 2" wide x 12" long

    To make your flasher work you may have to add a dummy load resister. A dummy load resister is used to increase the amps drawn by the LED to make the flasher operate.

     

    Instructions, Part 1 (PDF)

    Instructions, Part 2 (PDF)

  • Flush Mount D-Ring
    $2.99
    Flush Mount D-Ring
    x
                Flush mount D-rings for tie-down attachment. 
            
  • 1941 Ford Style LED Flush Mount Tail Light, Red
    1941 Ford Style LED Flush Mount Tail Light, Red
    x
                
    • 1941 Ford Style Flush Mount Design
    • 21 super bright LEDs
    • Complete with polycarbonate lens
    • Die cast chrome plated bezel
    • Epoxy coated, fully sealed electronics
    • 1157 style plug
    • Operates on 7.7 - 14.0 VDC
    • The bezel is 5-3/16" long by 1-7/8" tall by .550" thick
  • 1941 Ford Style LED Flush Mount Tail Light, Amber
    1941 Ford Style LED Flush Mount Tail Light, Amber
    x
                
    • 1941 Ford Style Flush Mount Design
    • 21 super bright LEDs
    • Complete with polycarbonate lens
    • Die cast chrome plated bezel
    • Epoxy coated, fully sealed electronics
    • 1157 style plug
    • Operates on 7.7 - 14.0 VDC
    • The bezel is 5-3/16" long by 1-7/8" tall by .550" thick
  • Steel Flush Mount Quarter Turn Fasteners, .650 Inch Grip, Pack/10
    Steel Flush Mount Quarter Turn Fasteners, .650 Inch Grip, Pack/10
    x
                Flush mount steel 1/4-turn panel fasteners are zinc plated for corrosion resistance. Use .550" length for thin materials, .650" length for thick materials.

    Measurement Guide (Link)
  • Steel Flush Mount Quarter Turn Fasteners, .550 Inch Grip, Pack/10
    Steel Flush Mount Quarter Turn Fasteners, .550 Inch Grip, Pack/10
    x
                Flush mount steel quarter turn fasteners are zinc plated for corrosion resistance. Use .550" length for thin materials, .650" length for thick materials. These panel fasteners have .685" head and a .405" body.

    Measurement Guide (Link)
  • Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" square
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     Fuel Door Curvature Template (PDF)

  • Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" round
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 4-3/4" x 3-1/2" oval
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
  • Hagan Street Rods 90 RQ 90   Curve Series LH Hinge Fuel Door, Door
    Hagan Street Rods 90 RQ 90 Curve Series LH Hinge Fuel Door, Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90104
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90OVQ 90   Curve Series LH Hinge Fuel Door, Oval
    Hagan Street Rods 90OVQ 90 Curve Series LH Hinge Fuel Door, Oval
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90103
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2" x 4-3/4" oval. It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90 SQ 90   Curve Series LH Hinge Fuel Door, Square
    Hagan Street Rods 90 SQ 90 Curve Series LH Hinge Fuel Door, Square
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90105

    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

     

  • Hagan Street Rods 45 RF 45 Degree Flat Series LH Hinge Round Fuel Door
    Hagan Street Rods 45 RF 45 Degree Flat Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included.

    • Can be mounted in steel or fiberglass
    • Made of 18 gauge mild steel
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gauge mild steel
    • The spout is 2" O.D. and 3-3/4" long
    • Overall depth of unit is 3"
    • Shipping weight is 3.011 lbs.
  • Aircraft Style Fuel Filler Neck & Cap
    Aircraft Style Fuel Filler Neck & Cap
    x
                

    Flush-mount caps offer excellent aerodynamic performance, large fill opening and attractive appearance. Cap features a positive seal, flip-up 1/4-turn handle, and a chain to secure it to the gas filler neck. Includes cap, chain, fuel filler neck, gasket, and all hardware. Polyethylene cap is vented.

    Hole in tank needs to be 3-3/4" for cap to sit flush.

  • King Racing Products 1995 Flush Mount Down Nozzle Filter
    King Racing Products 1995 Flush Mount Down Nozzle Filter
    x
                

    King Racing Products solved a problem for many drivers. Have you every had a nozzle filter break or come off due to debris. Now you dont have to worry with Kings flush nozzle filters. 

     

    • 1/8" NPT thread adapts to any nozzle filter biscuit.

     

     

     

  • Hagan Street Rods 45rq 45 Degree Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 45rq 45 Degree Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

    Fuel Door Curvature Template (PDF)

     

  • Hagan Street Rods 450 VCP 45 Degree Curve RH Hinge Oval Fuel Door
    Hagan Street Rods 450 VCP 45 Degree Curve RH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
  • Hagan Street Rods 450 VFP 45 Deg. Flat Series RH Hinge Oval Fuel Door
    Hagan Street Rods 450 VFP 45 Deg. Flat Series RH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4 x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • The outer plate is 7-3/4" by 5-1/4".
    • The box behind plate measures 6" by 4-7/16" by 2-7/8" tall

     

  • Hagan Street Rods 45 SFP 45 Degree Flat RH Hinge Square Fuel Door
    Hagan Street Rods 45 SFP 45 Degree Flat RH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 45 SQP 45   Curve Series RH Hinge Square Fuel Door
    Hagan Street Rods 45 SQP 45 Curve Series RH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

     

  • Hagan Street Rods fd45RFP 45 Degree Flat RH Hinge Round Fuel Door
    Hagan Street Rods fd45RFP 45 Degree Flat RH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" round
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan 450VQP 45 Degree Slight Curve Series RH Hinge Oval Fuel Door
    Hagan 450VQP 45 Degree Slight Curve Series RH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
    • Slight curve 32" radius top to bottom

     

  • Hagan Street Rods 45 OVC 45 Deg. Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 45 OVC 45 Deg. Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2" oval
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Billet Oval Fuel Fill Doors
    $89.99
    Billet Oval Fuel Fill Doors
    x
                

    These billet aluminum fuel fill doors work great in a pick-up bed or any flat surface. Can be flush mounted. Oval.

    The access door itself measures 5-1/2" long and 3" wide

    The hole needed for mounting is approximately 1/8" smaller than the total length and width to allow a nice finished appearance when installed.

    Includes studs, nuts and nylon spacers. No gas cap, gas filler or instructions are included.

    Mounting hardware included: four studs, nuts and nylon washers.

     

  • Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

Goto Previous PagePrevious Page
1 2