Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"flathead ford mallory" Page 1 of 1

  • Mallory Ignition 2527501 1949-53 Flathead Dual Point Distributor
    Mallory Ignition 2527501 1949-53 Flathead Dual Point Distributor
    x
                

    Get faster starts, quicker acceleration and better drive-ability from your Flathead Ford V8 with a dual-point Mallory distributor! Each version is full centrifugal advance (works with any carbureted set-up) and uses a remote-mount coil (not included).

    The distributor uses all current production parts, so you won't be stuck searching for oddball or old-time replacement components. A better ignition is the single best improvement you can make to a Flathead Ford V8.

    • Use with either 12-volt or 6-volt systems
    • Full centrifugal advance eliminates the hassle of cumbersome factory vacuum break
    • Distributor gear not included
    • Early "crab style" equipped engines can be converted using #91015634 timing cover and #91015634 drive gear
    • Does not fit some stock fan configurations

    500-2527501 Instructions (PDF)

  • Mallory Ignition 700 Ballast Resistor, .75-1.50 Ohm
    Mallory Ignition 700 Ballast Resistor, .75-1.50 Ohm
    x
                

    Stabilize coil current and prolong point life with Mallory ballast resistors. Computer-wound to ensure resistance value. Premium ceramic bodies provide maximum durability and superior heat transfer. Recommended when a new coil is installed.

    Mallory Unilite distributors include self-contained modules that require a ballast resistor, loom resistance wire, or internally resisted coil (ex. when using HyFire CD Ignitions). Using a heavy duty porcelain resistor and threaded terminal connectors, this resistor is rated at 200 watts and 0.75 (cold) – 1.5 (hot) ohms.

  • Mallory Ignition 25042 1932-53 Flathead Points
    Mallory Ignition 25042 1932-53 Flathead Points
    x
                

    Replacement points set for Mallory Distributors on 1932-53 flathead Ford V8s. Two points sets required per distributor.

  • Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    Mallory Ignition 5072101 32-41 Flathead 3 Bolt Electronic Distributor
    x
                

    Mallory Magnetic Breakerless Electronic Distributor for 1932-1941 Ford Flathead V8 with the 3-bolt mount. Includes Mallory Super-Duty cap (points style) and rotor with brass terminals.

    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Easy 3-wire hookup
    • Does not require an external control box
    • For 12 volt systems only

    500-5071601 Instructions (PDF)

     

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

  • Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
    Mallory Ignition 5027501 1949-53 Ford Flathead Electronic Distributor
    x
                

    Tried and true Mallory electronic distributor for your 1949-1953 Flathead Ford. Features magnetic breakerless ignition technology for greatly improved accuracy versus points-style distributors. For 12 volt systems only.

    • Easy 3-wire hookup
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Includes Mallory Super-Duty Cap and Rotor with brass terminals
    • Distributor drive gear not included (sold separately)

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil # 447-45001, no resistor will be required.

    500-5027501 Instructions (PDF)

  • Mallory Ignition 2572101 32-41 Flathead 3 Bolt Dual Point Distributor
    Mallory Ignition 2572101 32-41 Flathead 3 Bolt Dual Point Distributor
    x
                

    Mallory dual point distributors stabilize contact points eliminating point float and bounce to increase coil output. Super-Duty Cap and Rotor feature brass terminals to prevent shorting and arcing. Distributor is "ready-to-run" as the points, condenser, rotor and cap are all installed. Points are set to the proper gap.

    • Fits '32-'41 3-bolt mount Flathead V8
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Uses special heavy-duty points for increased RPM range & coil output
    • Ready to install & run

    500-2571601 Instructions (PDF)

    Note: This distributor is very likely to be in the way of the stock fan when used on 1941-1948 Ford and Mercurys. An electric fan may solve this problem.

  • 1932-48 Ford Flathead 3 Bolt Electronic Distributor
    1932-48 Ford Flathead 3 Bolt Electronic Distributor
    x
                Speedway Motors offers this billet aluminum electronic distributor for the fabulous '32-'41 Flathead Ford V8 with the 3-bolt mount. This distributor is a "ready-to-run" unit that does not require a control box. 

    We suggest a 12v coil 447-45001 (chrome) or 447-45011 (black) to be used with this distributor. We also suggest our spark plug wire set 910-64200.

    910-8353 Instructions (PDF)

  • Mallory Ignition 309 1949-1953 Flathead Distributor Rotor
    Mallory Ignition 309 1949-1953 Flathead Distributor Rotor
    x
                

    Replacement rotor for Mallory 1949-53 Flathead Ford V8 distributors. Mallory distributor rotors are constructed from top quality material and designed to fit your application for long lasting performance. 

    • Mallory 309
    • Distributor Rotor
    • Mallory 23, 24, 25, 27, 50, 57, DP, HP, YL Series
    • Sold each 
  • Mallory Ignition 318 New Crab Style Flathead Rotor - 5/8 Inch Shaft
    Mallory Ignition 318 New Crab Style Flathead Rotor - 5/8 Inch Shaft
    x
                

    This rotor fits the most recent version of the Mallory Distributor with the "crab style" cap. It fits the distributor shaft that's 5/8" diameter.

  • Mallory Ignition 2572001 42-48 Flathead 2 Bolt Dual Point Distributor
    Mallory Ignition 2572001 42-48 Flathead 2 Bolt Dual Point Distributor
    x
                

    Mallory dual point distributors stabilize contact points eliminating point float and bounce to increase coil output. Super-Duty Cap and Rotor feature brass terminals to prevent shorting and arcing.

    • For '42-'48 Flatheads with 2-bolt mount
    • Adjustable mechanical advance
    • Self-lubricating bushings provide years of trouble-free service
    • Uses special heavy-duty points for increased RPM range & coil output
    • Ready to install & run

    500-2318001 Instructions (PDF)

  • Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    Mallory Ignition 5072001 42-48 Flathead 2 Bolt Electronic Distributor
    x
                Mallory Magnetic Breakerless Electronic Distributor for 1942-1948 Ford  Flathead V8 with the 2-bolt mount. Easy 3-wire hookup. Adjustable mechanical  advance. Includes Mallory Super-Duty cap (Points Style) and rotor with brass  terminals. 

    For 12 volt systems only.


    500-5071501 Instructions (PDF)

    Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must use a ballast resistor that will achieve the required 1.4 ohm total resistance. If you are using coil #447-45001, no resistor will be required.

  • Mallory Ignition 352 Old Crab Style Flathead Rotor, 3/8 Inch Shaft
    Mallory Ignition 352 Old Crab Style Flathead Rotor, 3/8 Inch Shaft
    x
                This rotor fits the older design of the Mallory Distributor with the "crab style" cap. Fits 3/8" diameter shaft.