Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"finned valve covers chevy" Page 1 of 1

  • Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    x
                

    Classic 1960-1986 Small Block Chevy Edelbrock finned valve covers with oil fill hole. This style of valve covers was first made in the 1950's and they're still cool today. They are tall enough to clear roller rockers.

    • Aluminum
    • One valve cover has a hole and grommet is included for a PCV valve
    • Other valve cover has a threaded hole (female) and a male threaded aluminum cap with O-ring seal
    • Included grommet can be used in place of the cap for a push in breather
    • Includes baffle and pins to use inside the valve cover if desired
  • Chevy LS1/LS6 Finned Valve Covers, Polished
    Chevy LS1/LS6 Finned Valve Covers, Polished
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Chevy LS1/LS6 Finned Valve Covers, Plain
    Chevy LS1/LS6 Finned Valve Covers, Plain
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Edelbrock 4185 1965-Up Big Block Chevy Finned Valve Covers
    Edelbrock 4185 1965-Up Big Block Chevy Finned Valve Covers
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. Tall enough to fit over roller rockers. 

    Edelbrock Installation Instructions 

  • 1958-86 Small Block Chevy Tall Finned Valve Covers
    1958-86 Small Block Chevy Tall Finned Valve Covers
    x
                These valve covers not only look cool, they are the tall design to help with rocker arm clearance. Grommets included.
            
  • Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Offenhauser 5417 Chevy 6-Cylinder Finned Valve Cover
    Offenhauser 5417 Chevy 6-Cylinder Finned Valve Cover
    x
                

    This polished Offenhauser finned aluminum valve cover will shine up your 194-230-250-292 Chevy 6-cylinder from 1962-1975.

    1. This cover has one hole for a filler/breather. We suggest Twist-In Breather 550-2061.
    2. There are no "baffles" and no hole for a PCV valve. You would have to make your own hole.
    3. May have clearance issues with oversize valve springs.
    4. Please note that the valve cover is not polished between the fins on the top and in the side recesses on both sides of the valve cover.
  • Offenhauser 5042 348-409 Chevy Finned Aluminum Valve Covers
    Offenhauser 5042 348-409 Chevy Finned Aluminum Valve Covers
    x
                

    By Offenhauser. These rugged, cast aluminum Offy valve covers give classic good looks to lots of Hot Rod power plants! Fits 1958-1966 Chevrolet 348 or 409 "W-block" engines in both passenger cars and trucks.

    The sides, ends and fins have all received the "polisher's touch".

    NOTE:   The mounting holes of all Offenhauser valve covers are drilled standard and to factory specifications. Sometimes variations in the heads may require a slight enlarging of the holes.

  • Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Plain
    Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included. Only uses the end two bolts.

  • Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Polished
    Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included. Only uses the end two bolts.

  • Edelbrock 4140 348/409 Chevy Finned Aluminum Valve Covers
    Edelbrock 4140 348/409 Chevy Finned Aluminum Valve Covers
    x
                

    Edelbrock first made these aluminum valve covers in the late 50's and they're still a classic. Mad of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Overall height is 3-13/16". Edelbrock classic valve covers can be machined to accept breathers if desired.

    Made in the U.S.A. 

  • 1987-Up Small Block Chevy Tall Finned Valve Covers
    1987-Up Small Block Chevy Tall Finned Valve Covers
    x
                

    These Small Block Chevy valve covers not only look cool, they are the tall design to help with rocker arm clearance. Breathers sold separately.

    Tall nostalgia finned valve covers for 87-up SBC with breather holes. Inside dimension for rocker arm clearance is 3 ¾” at the center of the valve covers. This decreases slightly at the outer edges and measurement is from head surface to inside of cover.

  • 1965-95 Big Block Chevy Tall Finned Valve Covers
    1965-95 Big Block Chevy Tall Finned Valve Covers
    x
                

    These valve covers not only look cool, they are the tall design to help with rocker arm clearance. Polished aluminum. Bolts included.

    Breathers sold separately.

  • Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    x
                

    We have these hard-to-find covers for your 1937-1962 Chevrolet 216, 235 and 261 engines. These Chevy 6 cylinder finned aluminum Offenhauser valve covers will shine up your old Stovebolt. 

    NOTE: To use on 1954-1962 inline six head, you will need to supply a 1937-1953 style gasket, a pair of washers and stud seals typical of '37-'53, and a pair of acorn nuts to fit the long studs that come with the cover. This cover is a direct replacement for the 1937-1953 Chevy.

  • Chevy 348/409 Finned Aluminum Valve Covers, Plain
    Chevy 348/409 Finned Aluminum Valve Covers, Plain
    x
                

    W-Series 348 and 409 Chevys just cry out for a set of finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Mounting hardware included
    • Uses stock gaskets (not included)
       
  • Chevy 348/409 Finned Aluminum Valve Covers, Polishd
    Chevy 348/409 Finned Aluminum Valve Covers, Polishd
    x
                

    W-Series 348 and 409 Chevys just cry out for a set of finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Polished finish
    • Mounting hardware included
    • Uses stock gaskets (not included)
       
  • Offenhauser S/B Chevy Valve Covers, 1955-59 Staggered, No Oil Fill Hole
    Offenhauser S/B Chevy Valve Covers, 1955-59 Staggered, No Oil Fill Hole
    x
                
    • Cast aluminum
    • Finned top
    • High luster polish
  • Offenhauser 4056 1960-86 S/B Chevy Valve Covers w/ Oil Fill Hole
    Offenhauser 4056 1960-86 S/B Chevy Valve Covers w/ Oil Fill Hole
    x
                
    • Cast aluminum
    • Finned top
    • High luster polish
    • (1) Cover has twist-in breather hole open
    • (1) Cover has a knockout for a PCV grommet
  • Garage Sale - 1987-Up Small Block Chevy Tall Finned Valve Covers
    Garage Sale
    Garage Sale - 1987-Up Small Block Chevy Tall Finned Valve Covers
    x
                Please view the product's page for more information