Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fiberglass roadster body" Page 1 of 2

  • Standard 1923 T Roadster Body
    $469.99
    Standard 1923 T Roadster Body
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"
    • The body weighs approximately 41 pounds

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Speedway 1932 Ford Roadster Fiberglass Body
    Speedway 1932 Ford Roadster Fiberglass Body
    x
                

    Our Speedway '32 Roadster fiberglass body is finished in a smooth white gelcoat finish, ready for sanding and painting. Thick fiberglass with reinforcing at all stress points and special fiberglass divider panel. Professionally installed hinges, dash, seat set back for extra leg room, latches, striker plates, working doors and trunk lid, installed full inner panels on the doors and deck lid. Original style rain trough around the entire rumble seat area, recessed firewall completely installed. Each body is mounted on a '32 frame when the doors are hung to ensure they operate properly.

    Must be shipped truck - F.0.B. Lincoln, NE.

    This product is made to order and quantities will vary. Please allow six to eight weeks for lead time. 

     

  • Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    Deluxe 1927 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    x
                Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build tim

  • Deluxe '27 T-Bucket Frame Kit w/ Deluxe Body, Unchanneled Floor
    Deluxe '27 T-Bucket Frame Kit w/ Deluxe Body, Unchanneled Floor
    x
                Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size! 

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    Doors are shipped hinged and latched, but they do require fitting and hanging onto the body by the owner.

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Rod Action 1932 Ford Fiberglass Fenders w/ Smooth Running Boards
    Rod Action 1932 Ford Fiberglass Fenders w/ Smooth Running Boards
    x
                

    These fiberglass running boards and fenders work with both the '32 Ford Roadster Body by Rod Action (627-3200) and the 1932 Ford 3-Window Coupe Body by Rod Action (627-3203). The smooth running boards provide a custom, finished look. All Rod Action fiberglass body pieces are finished with a smooth gel coat.

    Set includes front fenders, rear fenders and running boards.

  • 1932 Lo-Boy Roadster Body Kit
    $6,999.99
    Product Rating: 4.00 Stars
    1932 Lo-Boy Roadster Body Kit
    x
                

    If you have ever wanted a 1932 Roadster but don't like the cramped cockpit, Speedway has the answer!  We started with a clean slate and no expense was spared in the development of this classic street rod. By stretching the chassis and adding 2" to the length of the doors, you are able to get in and out of the car much easier. Also by moving the seat back 2", you have much more leg room and a smoother ride than an original 1932 Ford.

    The Speedway Lo-Boy has been one of the most celebrated kit cars ever. Featured in Hot Rod Magazine, Street Rodder, and Rod & Custom Magazine, this car has recieved a great deal of publicity and acclaim. Correctly styled and authentically reproduced, the Lo-Boy Roadster revitalizes the hot rodding spirit that made the 1932 Ford a legend in America’s automotive history books. Designed for nostalgic originality, the Lo-Boy features a unique channeled look, which was quite popular in the early days of hot rodding. 

    The Lo-Boy body kit features a reinforced fiberglass 1932 Ford Roadster reproduction body, custom floor pan with transmission and driveshaft tunnel, passenger compartment bulkhead panel and trunk floor pan.  It also includes functional doors with inner panels installed, as well as a deck lid with inner panel installed.  Door jam structure braces, integral rear roll pan and rubber body mounting pads are also included.

    The body sits upon our custom 106" whe

  • Standard 1923 T Roadster Body w/ 20 Inch Pickup Bed, No Floor
    Standard 1923 T Roadster Body w/ 20 Inch Pickup Bed, No Floor
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Deluxe 1926-27 T Roadster Body w/ Doors, Unchanneled Floor Installed
    Deluxe 1926-27 T Roadster Body w/ Doors, Unchanneled Floor Installed
    x
                

    Our Deluxe '26-'27 Model T style roadster body includes (2) opening doors that have the latches and hinges installed. T-bucket bodies feature all fiberglass construction with a molded turtle deck and firewall, inner door panles, and a flat floor (unchanneled) installed. 

    • Total Length: 90" 
    • Firewall Width: 29"
    • Firewall to Back of Dash: 16-1/2"
    • Firewall to Back of Seat: 55"
    • Firewall to Center Line of Rear Axle: 75"
    • Widest Point of Body: 49"
    • Overall Height of Body: 24"
    • Rear Width: 42"

    This product is made to order.  Please allow three to four weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details.

  • 1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 13-1/2 Inch Wide
    1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 13-1/2 Inch Wide
    x
                

    Speedway Fiberglass rear fenders for your 1926-1927 Ford Model 'T' Coupe and Roadster.

    Choose Extended Width, Left or Right.

  • Standard 1926-27 T Roadster Body w/o Doors and Floor
    Standard 1926-27 T Roadster Body w/o Doors and Floor
    x
                

    Our Standard '26-'27 T body is a rugged, one-piece design (no doors). It features a molded turtle deck and firewall, and no foor. 

    • Total Length: 90" 
    • Firewall Width: 29"
    • Firewall to Back of Dash: 16-1/2"
    • Firewall to Back of Seat: 55"
    • Firewall to Center Line of Rear Axle: 75"
    • Widest Point of Body: 49"
    • Overall Height of Body: 24"
    • Rear Width: 42"

    This product is made to order.  Please allow three to four weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Standard 1926-27 T Roadster Body w/o Doors, Unchanneled Floor Installed
    Standard 1926-27 T Roadster Body w/o Doors, Unchanneled Floor Installed
    x
                

    Our Standard '26-'27 T body is a rugged, one-piece design (no doors). It features a molded turtle deck and firewall, and a flat floor (unchanneled) installed. 

    • Total Length: 90" 
    • Firewall Width: 29"
    • Firewall to Back of Dash: 16-1/2"
    • Firewall to Back of Seat: 55"
    • Firewall to Center Line of Rear Axle: 75"
    • Widest Point of Body: 49"
    • Overall Height of Body: 24"
    • Rear Width: 42"

    This product is made to order.  Please allow three to four weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Deluxe 1926-27 T Roadster Body w/ Doors, No Floor
    Deluxe 1926-27 T Roadster Body w/ Doors, No Floor
    x
                

    Our Deluxe '26-'27 T body includes (2) opening doors that have the latches and hinges installed. Features a molded turtle deck and firewall, inner door panles, and no foor. 

    • Total Length: 90" 
    • Firewall Width: 29"
    • Firewall to Back of Dash: 16-1/2"
    • Firewall to Back of Seat: 55"
    • Firewall to Center Line of Rear Axle: 75"
    • Widest Point of Body: 49"
    • Overall Height of Body: 24"
    • Rear Width: 42"

    This product is made to order.  Please allow three to four weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

     

  • Deluxe 1927 T-Bucket Frame Kit w/ Standard Body, No Floor
    Deluxe 1927 T-Bucket Frame Kit w/ Standard Body, No Floor
    x
                Looking for a little more interior room and a lower profile in your T  roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the  same triangulated four-bar rear suspension as the Deluxe T, but with a longer  wheelbase and extended rear frame section to accommodate Speedway's high-quality  fiberglass '27 T roadster body. The body-and-frame combo can be used to build a  hot rod with the same open engine bay and fenderless look of a T-bucket, but  offers a lower seating position and a lot more legroom. Try it on for size!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Standard 1923 T Roadster Body w/ 3 Inch Channeled Floor
    Standard 1923 T Roadster Body w/ 3 Inch Channeled Floor
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery. Bodies with the 3" channel will fit over a 25-7/8" maximum width frame.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Deluxe '27 T-Bucket Frame Kit w/ Standard Body, Unchanneled Floor
    Deluxe '27 T-Bucket Frame Kit w/ Standard Body, Unchanneled Floor
    x
                Looking for a little more interior room and a lower profile in your T  roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the  same triangulated four-bar rear suspension as the Deluxe T, but with a longer  wheelbase and extended rear frame section to accommodate Speedway's high-quality  fiberglass '27 T roadster body. The body-and-frame combo can be used to build a  hot rod with the same open engine bay and fenderless look of a T-bucket, but  offers a lower seating position and a lot more legroom. Try it on for size!  

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit.   

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • Standard 1923 T Roadster Body w/ Unchanneled Floor
    Standard 1923 T Roadster Body w/ Unchanneled Floor
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Standard 1923 T Roadster Body w/ 20 Inch Pickup Bed, Unchanneled Floor
    Standard 1923 T Roadster Body w/ 20 Inch Pickup Bed, Unchanneled Floor
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Standard 1923 T Roadster Body w/ 20 Inch Pickup Bed, Channeled Floor
    Standard 1923 T Roadster Body w/ 20 Inch Pickup Bed, Channeled Floor
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Standard 1923 T Roadster Body w/ 14 Inch Pickup Bed, No Floor
    Standard 1923 T Roadster Body w/ 14 Inch Pickup Bed, No Floor
    x
                

    Speedway's rugged one-piece body has a flat molded-in dash and a flat, smooth firewall. Also has body lip around the top edge to attach upholstery.

    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to three weeks for lead time.

    Truck Freight Shipping Charges Apply - click here for details

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • 1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 11 Inch Wide
    1926-27 Model T Fiberglass Rear Fenders, Coupe & Roadster, 11 Inch Wide
    x
                

    Speedway Fiberglass rear fenders for your 1926-1927 Ford Model 'T' Coupe and Roadster.

    • 11-1/16" wide at center top
    • 9-3/8" wide at front by running board
    • Step inwards at front extends upward 9” from front edge
    • Width at rear at midpoint of inward step is 8-¼”
    • Rear inward step extends from mounting lip downwards 7-½”
    • End to end dimension is 41-½”
    • From floor to top of fender while sitting on floor is 19”

    Choose Stock Width, Left or Right.

  • Deluxe 1923 T Roadster Body
    $545.99
    Deluxe 1923 T Roadster Body
    x
                

    Functional right hand door (not hinged or latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange. Also available with long or short pick-up bed installed. Save time and effort by ordering your body with the floor installed (channeled or un-channeled) and the door hinged and latched for you. Rugged fiberglass construction.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

  • Deluxe 1923 T Roadster Body w/ Unchanneled Floor
    Deluxe 1923 T Roadster Body w/ Unchanneled Floor
    x
                

    Functional right hand door (hinged and latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange. Also available with long or short pick-up bed installed. Save time and effort by ordering your body with the floor installed (un-channeled) and the door hinged and latched for you. Rugged fiberglass construction.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

  • Deluxe 1923 T Roadster Body w/ 3 Inch Channeled Floor
    Deluxe 1923 T Roadster Body w/ 3 Inch Channeled Floor
    x
                

    Functional right hand door (hinged and latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange. Also available with long or short pick-up bed installed. Save time and effort by ordering your body with the floor installed (channeled) and the door hinged and latched for you. Rugged fiberglass construction.

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

  • Deluxe 1927 T-Bucket Frame Kit
    From: $2,999.99
    Deluxe 1927 T-Bucket Frame Kit
    x
                

    Looking for a little more interior room and a lower profile in your T roadster? Then try our Deluxe '27 T! The all-new Deluxe '27 frame features the same triangulated four-bar rear suspension as the Deluxe T, but with a longer wheelbase and extended rear frame section to accommodate Speedway's high-quality fiberglass '27 T roadster body. The body-and-frame combo can be used to build a hot rod with the same open engine bay and fenderless look of a T-bucket, but offers a lower seating position and a lot more legroom. Try it on for size!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware. 

    Chassis Exploded View (Link)

    This product requires a 3-4 week build time.

  • 1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, Unchanneled Floor
    1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, Unchanneled Floor
    x
                

    Functional right hand door (hinged and latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange.

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

     

  • 1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, No Floor
    1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, No Floor
    x
                

    Functional right hand door (not hinged or latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange.

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

     

  • 1923 T Deluxe Roadster Body with 14 Inch Pickup Bed, No Floor
    1923 T Deluxe Roadster Body with 14 Inch Pickup Bed, No Floor
    x
                

    Functional right hand door (not hinged or latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange.

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

     

  • 1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, 3 Inch Channeled Floor
    1923 T Deluxe Roadster Body with 20 Inch Pickup Bed, 3 Inch Channeled Floor
    x
                

    Functional right hand door (hinged and latched), door sill, flat dashboard, recessed area for upholstery tack strip, molded firewall and lower body mounting flange.

    This product is made to order. Please allow two to four weeks for lead time. Ships truck freight.

    Truck Freight Shipping Charges Apply - click here for details 

  • 1930-31 Model A Coupe & Roadster Fiberglass Deck Lid
    1930-31 Model A Coupe & Roadster Fiberglass Deck Lid
    x
                

    Made of heavy duty fiberglass with inner panel. Inner panel must be mounted after fitting trunk lid to body. Features a glossy gelcoat finish that is ready for paint preparations.

    Ships UPS oversize. 

  • 1923-25 Model T Door
    $99.99
    1923-25 Model T Door
    x
                

    This door will make the entry and exit much easier on your Model T roadster. Fits our T bodies as well as those from other manufacturers. For entire kit, see our '23-'25 T Optional Door Kit # 900-2202.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • Speedway Tribute T-Bucket Kit
    $3,999.99
    Product Rating: 5.00 Stars
    Speedway Tribute T-Bucket Kit
    x
                

    If you thought all T-buckets were the same, think again! The all-new Speedway Motors Tribute T breaks the T-bucket mold. It offers the traditional look of classic, competition-influenced roadsters combined with modern components and refined engineering. All this in a comfortable package that's easy to assemble using basic hand tools.

    The Tribute T frame has an extra-high rear kickup and Model A rear crossmember that will accept our medium-arch rear leaf spring. Rear axle options include our bolt-on Winters quick-change kit 7151801, bolt-on 9" Ford rear axle option 7151809, or a Ford-style banjo rear end of your choice (must be a centered-pinion rear axle). The front suspension uses a 4 inch drop I-beam axle, wishbone-style radius rods and traditional steering with a reversed Corvair steering box. All suspension, steering and brake pedal brackets are pre-welded to the frame and you can choose from flathead F

  • 1932 Ford Roadster Fiberglass Dash Panel, Filled
    1932 Ford Roadster Fiberglass Dash Panel, Filled
    x
                

    Filled fiberglass dash panel for 1932 Ford Roadster. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1932 Ford Roadster Fiberglass Dash Panel, Stock Style
    1932 Ford Roadster Fiberglass Dash Panel, Stock Style
    x
                

    Stock reproduction fiberglass dash panel for 1932 Ford Roadster. Features a glossy gelcoat finish that is ready for paint preparations.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1928-29 Model A Rear Fenders for Coupe, Roadster, Pickup, 11-1/2 Inches Wide
    1928-29 Model A Rear Fenders for Coupe, Roadster, Pickup, 11-1/2 Inches Wide
    x
                

    Quality fiberglass reproduction rear fenders for your 1928-1929 Ford Model A coupe, roadster, or pickup. Stock width of 11-1/2". Fender width is measured at the top of fender arch, from mounting flange to outermost edge.

    Specify left (driver) or right (passenger) side.

  • 1928-29 Model A Rear Fenders for Coupe, Roadster, Pickup, 14 Inches Wide
    1928-29 Model A Rear Fenders for Coupe, Roadster, Pickup, 14 Inches Wide
    x
                

    2-1/2" widened fiberglass reproduction rear fenders for your 1928-1929 Ford Model A coupe, roadster, or pickup. Fender width is measured at the top of fender arch, from mounting flange to outermost edge.

    Specify left (driver) or right (passenger) side.

  • Two-Piece Round Top Model T Roadster Windshield Frame, 39 Inch Wide
    Two-Piece Round Top Model T Roadster Windshield Frame, 39 Inch Wide
    x
                

    Mr. Roadsters 2-piece round top windshield frames fit most fiberglass T-buckets. Triple chrome plated. Kit includes frame (approximately 20" tall) and hardware. Designed for short style windshield posts.

    No glass or windshield rubber is included with our windshield frames. Note: Speedway's 1923-25 T bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • Two-Piece Round Top Model T Roadster Windshield Frame, 40-1/2 Inch Wide
    Two-Piece Round Top Model T Roadster Windshield Frame, 40-1/2 Inch Wide
    x
                

    Mr. Roadsters 2-piece round top windshield frames fit most fiberglass T-buckets. Triple chrome plated. Kit includes frame (approximately 20" tall) and hardware. Designed for short style windshield posts.

    No glass or windshield rubber is included with our windshield frames. Note: Speedway's 1923-25 T bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • Two-Piece Round Top Model T Roadster Windshield Frame, 39-5/8 Inch Wide
    Two-Piece Round Top Model T Roadster Windshield Frame, 39-5/8 Inch Wide
    x
                

    Mr. Roadsters 2-piece round top windshield frames fit most fiberglass T-buckets. Triple chrome plated. Kit includes frame (approximately 20" tall) and hardware. Designed for short style windshield posts.

    No glass or windshield rubber is included with our windshield frames. Note: Speedway's 1923-25 T bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

  • Square Top T Windshield Frame, 39-5/8 Inches Wide
    Square Top T Windshield Frame, 39-5/8 Inches Wide
    x
                

    Mr. Roadsters square top 'T' windshield frames fit most fiberglass T-buckets. Triple chrome plated steel. Kit includes frame (approximately 20" tall), non-functional hinges and hardware. Designed for short style posts.

    No glass or windshield rubber is included with our windshield frames.

    Note: Speedway 1923-25 Model T Bodies use a 39-5/8" wide windshield frame when using short posts.

    Builder's Tip: If using 1/4" glass or lexan, use urethane or setting tape (available from a glass shop) and do not use brass setting channel.

Goto Previous PagePrevious Page
1 2