Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"fender left hand" Page 1 of 2

  • MD3 LH Fender New Style
    From: $54.99
    MD3 LH Fender New Style
    x
                The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Red, Chevron Blue, Yellow and Black. Choose Monte Carlo, GTO, Impala SS, Camry, Fusion of Charger graphics. Graphics sold separately.
            
  • 1934 Chevy Master Rear Fenders
    $179.99
    1934 Chevy Master Rear Fenders
    x
                Fiberglass construction. Stock width. Choose left hand or right hand. Ships oversize UPS. 

    This product is made to order. Please allow six to eight weeks for lead time.

    Chevrolet Spotter's Guide (Link)

  • 1926-27 Model T Fiberglass Rear Fenders, Sedan & Touring
    1926-27 Model T Fiberglass Rear Fenders, Sedan & Touring
    x
                

    Speedway Fiberglass rear fenders for your 1926-1927 Ford Model 'T' Sedan and Touring Car. Has the same 7-1/2" wide dimensions as a stock 'T' fender.

    Choose Left or Right.

  • 1935-1937 Ford Pickup Rear Fenders
    1935-1937 Ford Pickup Rear Fenders
    x
                Choose left hand or right hand. 11-1/2" wide. Oversize UPS. Fiberglass construction. This part measures 48 1/8" long end to end.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1940-1941 Ford Pickup Rear Fenders
    1940-1941 Ford Pickup Rear Fenders
    x
                1/2 ton pick-up has dimple for mounting spare on right hand (passenger side). Choose left hand or right hand side.  Fiberglass construction. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1926-27 Ford Model T Fiberglass Front Fenders
    1926-27 Ford Model T Fiberglass Front Fenders
    x
                

    These Speedway Fiberglass front fenders for your 1926-1927 Ford Model 'T' have a smooth gelcoat finish.  They feature all the stock body lines and are molded from original stock patterns.

    Ford Model T Front Fenders

    • 1926-1927
    • Fiberglass 
    • Choose Left or Right

    Note:  These fenders may require some trimming to match up with our '26-'27 Splash Aprons (part number 900-2710).

    Fiberglass Tech Tip (Link) 

  • 1931-1932 Chevy Coupe Side Splash Aprons
    1931-1932 Chevy Coupe Side Splash Aprons
    x
                Fiberglass construction. 64-1/2". Choose left or right hand. Won't fit sedan. Ships as oversize UPS. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Chevrolet Spotters Guide (Link)

  • 1953-56 Ford F100 Pickup 3 Inch Wider Rear Fenders
    1953-56 Ford F100 Pickup 3 Inch Wider Rear Fenders
    x
                Choose left hand or right hand. 13-1/2" wide. Fiberglass construction. Ships truck freight. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

     

    Truck Freight Shipping Charges Apply - click here for details

  • 1934 Chevy Master Fiberglass Front Fenders
    1934 Chevy Master Fiberglass Front Fenders
    x
                

    These 1934 Chevy Master front fenders are of fiberglass construction. Features a glossy gelcoat finish that is ready for paint preparations. Choose left hand or right hand.

    Chevrolet Spotters Guide (Link)

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

    Truck Freight Shipping Charges Apply - click here for details.

  • 1928-29 Ford Model A Fiberglass Front Fenders
    1928-29 Ford Model A Fiberglass Front Fenders
    x
                

    Original style reproduction fiberglass 1928-1929 Ford Model A front fenders. Fenders are made of heavy duty fiberglass and feature a glossy gelcoat finish that is ready for paint preparations.

    Specify left side (driver) or right side (passenger).

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

  • 1937-38 Chevy Pickup Fiberglass Front Fenders
    1937-38 Chevy Pickup Fiberglass Front Fenders
    x
                Reproduction 1937-38 Chevy pickup front fiberglass fenders. Features a glossy gelcoat finish that is ready for paint preparations. Choose left hand or right hand side. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Truck Freight Shipping Charges Apply - click here for details.

  • 1939-40 Ford Front Fenders
    $279.99
    1939-40 Ford Front Fenders
    x
                These fiberglass 1939-40 Ford front fenders are designed for passenger cars. Fronts fit 1939 Ford Deluxe, 1940 Deluxe and Standard. Choose left hand or right hand. Ships truck freight.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Truck Freight Shipping Charges Apply - click here for details

  • 1937-38 Chevy Pickup Fiberglass Rear Fenders
    1937-38 Chevy Pickup Fiberglass Rear Fenders
    x
                Reproduction 1937-38 Chevy pickup rear fiberglass fenders. Features a glossy gelcoat finish that is ready for paint preparations. Choose left hand or right hand side. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Truck Freight Shipping Charges Apply - click here for details.

  • 1933 Dodge-Plymouth Front Fenders
    1933 Dodge-Plymouth Front Fenders
    x
                Front fender with 112" wheelbase. Fiberglass construction. Choose left hand or right hand. Fits 1933-34 pick-up also.  Ships truck freight.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    Hagan Street Rods 90 SC 90 Degree Curve LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" square
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     Fuel Door Curvature Template (PDF)

  • Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    Hagan Street Rods 90 RC 90 Deg. Curve Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2" round
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVC 90 Deg. Curve Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 4-3/4" x 3-1/2" oval
    • It's most common use is in the rear fender of cars and truck from around 1936 to the early 1950's
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic
  • 1935-36 Chevy Master Rear Fenders
    1935-36 Chevy Master Rear Fenders
    x
                Fiberglass construction. Stock width. Choose left hand or right hand. Ships truck freight. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Chevrolet Spotters Guide (Link)

  • 1926-27 T Splash Aprons
    $109.99
    1926-27 T Splash Aprons
    x
                Our fiberglass side splash aprons are a replacement for '26-'27 T bodies. Choose LH or RH side.
            
  • 1940-41 Ford Pickup Front Fenders
    1940-41 Ford Pickup Front Fenders
    x
                1/2 ton panel, but not sedan delivery. Choose left hand or right hand. Fiberglass construction. Ships truck freight. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

     

    Truck Freight Shipping Charges Apply - click here for details

  • 1935-37 Ford Pickup Front Fenders
    1935-37 Ford Pickup Front Fenders
    x
                Choose left hand or right hand. Fiberglass construction. Ships truck freight.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Hagan Street Rods 90 RQ 90   Curve Series LH Hinge Fuel Door, Door
    Hagan Street Rods 90 RQ 90 Curve Series LH Hinge Fuel Door, Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90104
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90OVQ 90   Curve Series LH Hinge Fuel Door, Oval
    Hagan Street Rods 90OVQ 90 Curve Series LH Hinge Fuel Door, Oval
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90103
    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2" x 4-3/4" oval. It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

  • Hagan Street Rods 90 SQ 90   Curve Series LH Hinge Fuel Door, Square
    Hagan Street Rods 90 SQ 90 Curve Series LH Hinge Fuel Door, Square
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    910-90105

    Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.

     

     

  • 1981-1988 Monte Carlo SS Steel Front Fender
    1981-1988 Monte Carlo SS Steel Front Fender
    x
                

    1981-1988 Monte Carlo SS Stock Car body panels are made of real steel. Choose left or right hand side when ordering a front fender.

    Note: These are not OEM panels - They are fabricated for offroad, circle track racing only and provided in a black color finish only. 

  • 1934 Front Fender Front Brace, LH
    1934 Front Fender Front Brace, LH
    x
                Heavy duty stamped steel. Also supports 1933-1934 Ford headlight. A must for strength and durability. Front brace for front fender. Not for pickup or truck.
            
  • 1934 Dodge/Plymouth Fiberglass Front Fenders, Short Wheelbase
    1934 Dodge/Plymouth Fiberglass Front Fenders, Short Wheelbase
    x
                

    Fiberglass front fenders for "short" 108" wheelbase 1934 Dodge/Plymouth models. Each measures 56" long. Choose left or right hand.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery.

    Truck Freight Shipping Charges Apply - click here for details.

  • 1934 Dodge/Plymouth Side Splash Aprons
    1934 Dodge/Plymouth Side Splash Aprons
    x
                            Side splash aprons for Dodge/Plymouth, 114" long wheelbase. Fiberglass construction. Choose left hand or right hand. Ships oversize UPS.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • 1933 Master Front Fenders
    $249.99
    1933 Master Front Fenders
    x
                Master only, with original peaked beading. Choose left or right hand. Fiberglass construction. Ships truck freight. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Chevrolet Spotters Guide (Link)

  • Black Model A Tail Light Bracket, Left
    Black Model A Tail Light Bracket, Left
    x
                

    Stamped steel Model A tail light bracket (taillight is not included). Black powder coat finish. Left side bracket will mount license plate bracket.

    Three holes are drilled to mount this bracket to your Model A fender:

    • The bottom two holes are 3-7/8" center to center
    • The top hole is 3-3/8" center to center with each bottom hole
  • 1934 Dodge/Plymouth Fiberglass Front Fenders, Long Wheelbase
    1934 Dodge/Plymouth Fiberglass Front Fenders, Long Wheelbase
    x
                

    Fiberglass front fenders designed for "long" 114" wheelbase 1934 Dodge/Plymouth models. Each measures 65" long and 23" wide. Choose left or right hand.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

    Truck Freight Shipping Charges Apply - click here for details.

  • 1932 Chevy Front Fenders
    $249.99
    1932 Chevy Front Fenders
    x
                Fiberglass construction. Fits all 1932 Chevy models. Choose left or right hand. Ships truck freight. 

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

     

    Truck Freight Shipping Charges Apply - click here for details

    Chevrolet Spotters Guide (Link)

  • Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    Hagan Street Rods 90RF 90 Degree Flat Series LH Hinge Round Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • This part is a 7" radius
    • Door is 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90 OVF 90 Degree Flat Series LH Hinge Oval Fuel Door
    Hagan Street Rods 90 OVF 90 Degree Flat Series LH Hinge Oval Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 4-3/4" x 3-1/2"
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • Hagan Street Rods 90SF 90 Degree Flat Series LH Hinge Square Fuel Door
    Hagan Street Rods 90SF 90 Degree Flat Series LH Hinge Square Fuel Door
    x
                

    Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.

    • Includes housing, door, hinge, latch, gas cap, spout and install instructions
    • Door is 3-1/2" square
    • The top is made of 18 gage mild steel
    • The spout is 2" o.d. and 3-3/4" long
    • Hinge is spring loaded to hold the door open and closed
    • Latch is spring loaded and magnetic

     

  • 1936 Chevy Master Front Fenders
    1936 Chevy Master Front Fenders
    x
  • '64-'70 Mustang Crossmember
    $299.99
    Product Rating: 5.00 Stars
    '64-'70 Mustang Crossmember
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1964-1970 Ford Mustang Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • 1930 A Side Splash Apron
    $89.99
    1930 A Side Splash Apron
    x
                      Fiberglass construction.  Left or right available.

    This product is usually in stock. However, if it is not, please allow three to four weeks for delivery. 

  • Black Model A Tail Light Bracket, Right
    Black Model A Tail Light Bracket, Right
    x
                

    Stamped steel Model A tail light bracket (tail light is not included). Black powder coat finish. Left side bracket will mount license plate bracket.

    Three holes are drilled to mount this bracket to your Model A fender:

    • The bottom two holes are 3-7/8" center to center
    • The top hole is 3-3/8" center to center with each bottom hole
Goto Previous PagePrevious Page
1 2