Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"exhaust wrap heat" Page 1 of 2

Garage Sale (0)

  • DEi 010122 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Tan
    DEi 010122 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Tan
    x
                DEI Pipe Wrap is used in many types of  applications for reducing  unwanted and harmful heat under the hood and  from entering the driver  compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
    DEi 010127 Titanium Exhaust Wrap, 2 Inch x 50 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Works best on Stainless Steel headers.

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
    DEi 010129 Titanium Exhaust Wrap, 2 Inch x 15 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    Works best on Stainless Steel headers.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • DEi 010119 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Black
    DEi 010119 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Black
    x
                DEI Pipe Wrap is used in many types of  applications for reducing unwanted and harmful heat under the hood and  from entering the driver compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • DEi 010123 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Titan
    DEi 010123 Exhaust Pipe Wrap and Locking Ties Kit, 2 Inch x 25 Ft, Titan
    x
                DEI Pipe Wrap is used in many types of  applications for reducing  unwanted and harmful heat under the hood and  from entering the driver  compartment while improving horsepower. 

    Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's, RV's, heavy duty truck & tow vehicles, as well as in many non-automotive applications.

    Wrapping uses include:

    • Header tubes to protect plug wires
    • Downpipes to improve velocity
    • Sections of exhaust & tail pipe to reduce heat from entering vehicle interior
    • Protect under hood components from direct heat
    • Prevent burns from HOT motorcycle pipes
    • Strategically wrap sections of pipe to block heat from entering vehicle
    • Everything needed in one easy-to-install kit
    • Titanium wrap withstands heat up to 1800°F (980°C)
    • 25 foot roll of pipe wrap
    • Locking ties made of 304 stainless steel

    Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.

  • Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Black Color
    Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010128 Titanium Exhaust Wrap, 1 Inch x 15 Ft Roll
    DEi 010128 Titanium Exhaust Wrap, 1 Inch x 15 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    Works best on Stainless Steel headers.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
    DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
    x
                

    This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

    • Constructed from pulverized lava rock - titanium-like strength and toughness
    • Reduces underhood temps resulting in cooler air intake for improved performance 
    • Able to handle 25% more heat than conventional wrap
    • Capable of handling more heat than any other wrap found in the market today
    • It’s pliable - no need to wet the wrap when wrapping tubing
    • Will not shrink
    • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
    • Very cool carbon fiber look

    Works best on Stainless Steel headers.

    Instruction Sheet (PDF)

    Frequently Asked Questions (PDF)

  • Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Black Color
    Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

     

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, White Color
    Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, White Color
    Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
    Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, White Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, White Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Titanium Color
    Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Titanium Color
    x
                

    If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

    • Retains exhaust heat within the tube for increased flow and horsepower
    • Reduced underhood temperatures
    • Protects surronding components from excessive heat
    • Made from a durable, specially treated woven glass fiber material

    For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

  • DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 8 Pack
    DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

  • DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 2 Pack
    DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Black, 2 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

  • DEi 010330 Motorcycle Exhaust Pipe Wrap Kit, Black
    DEi 010330 Motorcycle Exhaust Pipe Wrap Kit, Black
    x
                

    A simple and effective way to control heat, protect against serious leg burns and improve performance. Pipe wrap kits contain everything needed to wrap a set of pipes all in one convenient package.

    Each kit includes two 2" x 15 foot rolls of Black exhaust wrap, eight 8" & four 14" stainless steel Locking Ties to secure wrap and Black HT Silicone Coating spray that penetrates, seals, protects and preserves wrap.

    A proprietary coating is applied to all DEI wrap to act as a bonding agent and to increase durability levels under extreme heat.

    • Prevent burns
    • Improve exhaust flow for better performance
    • Offers a custom style
    • Increase horsepower!
    • Asbestos free & easy to install
    • Significant cost savings by bundling as a kit
    • Withstands direct continuous heat up to 1200°F
    • Protects against abrasions, hot oil spills, road grime and more!

    35610330 Pipe Wrap Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF) 

  • Heatshield Armor Exhaust Wrap, 1/2 Inch Thick, 12 x 60 Inch Sheet
    Heatshield Armor Exhaust Wrap, 1/2 Inch Thick, 12 x 60 Inch Sheet
    x
                Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
            
  • Heatshield Armor Exhaust Wrap, 1/4 Inch Thick, 12 x 60 Inch Sheet
    Heatshield Armor Exhaust Wrap, 1/4 Inch Thick, 12 x 60 Inch Sheet
    x
                Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
            
  • Thermo Tec 11003 Header Wrap, 2 Inch x 100 Ft, White Color
    Thermo Tec 11003 Header Wrap, 2 Inch x 100 Ft, White Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings
  • Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color
    Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, White Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings
  • Thermo Tec 11002 Header Wrap, 2 Inch x 50 Ft, White Color
    Thermo Tec 11002 Header Wrap, 2 Inch x 50 Ft, White Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings
  • Thermo Tec 11023 Header Wrap, 2 Inch x 100 Ft, Black Color
    Thermo Tec 11023 Header Wrap, 2 Inch x 100 Ft, Black Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Installation Instructions (PDF)

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings

     

  • Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color
    Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Installation Instructions (PDF)

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings

     

  • Thermo Tec 11022 Header Wrap, 2 Inch x 50 Ft, Black Color
    Thermo Tec 11022 Header Wrap, 2 Inch x 50 Ft, Black Color
    x
                

    Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

    Installation Instructions (PDF)

    Typical Small Block Chevy Headers Need:

    • (2)  704-11002/11022 Wraps
    • (1)  704-13101 Strap Kit
    • (2)  70412001 High Heat Coatings

    Typical Big Block Chevy and 180 Degree Headers Need:

    • (2-3)  704-11002/11022 Wraps
    • (1)     704-13101 Strap Kit
    • (2-3)  704-12001 High Heat Coatings

     

  • DEi 010501 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 2 Pack
    DEi 010501 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 2 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

     

  • Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
    Thermo Tec 12002 Hi-Heat Header Wrap Coating, Aluminum
    x
                

    To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

    The coating also works excellent as a paint directy on metal surfaces.                 

    CANNOT BE SHIPPED BY AIR!

  • Thermo Tec 12001 Hi-Heat Header Wrap Coating, Black
    Thermo Tec 12001 Hi-Heat Header Wrap Coating, Black
    x
                

    To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

    The coating also works excellent as a paint directy on metal surfaces.                 

    CANNOT BE SHIPPED BY AIR!

  • MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    MSD 5554 Street-Fire Spark Plug Wires Set, Small Block Chevy 350 HEI
    x
                

    Street Fire low resistance spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery. Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, with 90 degree boots.

    • Long enough to go over valve covers
    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
    These wires are for S/B Chevys with an HEI cap and are designed to be routed over the valve covers.
  • Thermo Tec 14002 Thermo-Shield Thermal Tape
    Thermo Tec 14002 Thermo-Shield Thermal Tape
    x
                

    Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST PIPE.

    The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 degrees Fahrenheit.

    Comes in a 1-1/2" wide x 15' foot roll.

  • Thermo-Sleeve for Hoses and Wires, 1/2 Inch x 3 Feet
    Thermo-Sleeve for Hoses and Wires, 1/2 Inch x 3 Feet
    x
                Using Thermo-Sleeve will provide your wires and  hoses with protection from both radiant and conductive heat. The  aluminized sleeving reflects over 90 percent of heat, while the inner  material is fireproof and resistant to oil. Combined, the  high-temperature fabric and reflective foil skin provide the protection  you need in today's high-performance applications. 
    • 36" length
    • Fits 1/2" - 1" diameter
    • 2,000º F max temp
    • Wrap-around installation
    • Easy hook and loop closure
    • Fireproof & oil resistant
    • Tough silver Mylar foil can be effective with radiant heat up to 2,000º F and 400º F for conductive heat
  • MSD 5564 Street-Fire Spark Plug Wires, S/B Chevy, Stock Cap, Under Manifold
    MSD 5564 Street-Fire Spark Plug Wires, S/B Chevy, Stock Cap, Under Manifold
    x
                

    Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, all wrapped in simple, durable black sleeves and boots.  Fully assembled wires designed for S/B Chevys with points style stock socket cap. Routed under the headers.  

    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
  • MSD 5565 Street-Fire Spark Plug Wires Set, S/B Chevy, Stock Distributor Cap
    MSD 5565 Street-Fire Spark Plug Wires Set, S/B Chevy, Stock Distributor Cap
    x
                

    Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, all wrapped in simple, durable black sleeves and boots.  Designed for Small Block Chevys with early Socket style cap. Routed over the valve covers.

    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
  • MSD 5543 Street-Fire Spark Plug Wires Set, Ford 289-302 Socket
    MSD 5543 Street-Fire Spark Plug Wires Set, Ford 289-302 Socket
    x
                

    The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.  These wires are for S/B Fords with a Socket style cap.

    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps

     

Goto Previous PagePrevious Page
1 2