Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"engine mount installation" Page 1 of 12

  • Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    x
                

    Side-mount motor mounts are a more rugged mount design than the original front mounts found on your Tri-Five Chevy, plus they allow more room for front drive accessories. Our motor mount kit allows you to side-mount 1958-up S/B Chevy 283-400 c.i. V-8 engines into your 1955, 1956, or 1957 Chevy passenger car.  Will also work on 396-454 big block engines.

    Includes frame brackets, engine brackets, rubber mount cushions, hardware, and instructions.

    1955-1957 Chevy Bolt-In Motor Mount Installation Instructions

  • Chevy Weld-In Motor Mounts
    $79.99
    Product Rating: 4.18 Stars
    Chevy Weld-In Motor Mounts
    x
                

    More often than not, we are trying to put an engine in something that no one has built bolt-in mounts for. If that's your story, we have just the deal for you! This S/B Chevy and B/B Chevy motor mount has a poly bushing in it giving you a vibration free installation.

    This mount will use replacement bushing 916-34545.

    Welding and fitting required.

  • Universal Bolt-Through Engine Mount Cushion Kit
    Universal Bolt-Through Engine Mount Cushion Kit
    x
                

    Connects engine mounts to frame adapters. Heavy duty rubber cushion absorbs vibrations so your mounts won't break. These universal body mounts are required on all motor installations.

    Complete with bolts, washers, and rubber cushions. Does both sides.

    Engine Mounting Illustration (GIF)

  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • 1962-1994 Small Block Ford 289-302 Engine Mount
    1962-1994 Small Block Ford 289-302 Engine Mount
    x
                

    Specially designed brackets to mount your 1962-1994 S/B Ford or Mercury 260-289-302 V8 into almost any chassis. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Guide (GIF)

    Small Block Ford Motor Mount Installation Instructions (PDF)

  • Ford Weld-In Motor Mounts
    $99.99
    Product Rating: 5.00 Stars
    Ford Weld-In Motor Mounts
    x
                More often than not, we are trying to put an engine in something that no one has built bolt-in mounts for. If that's your story, we have just the deal for you! 

    These 289/302/351W S/B Ford motor mounts have a rubber bushing in them giving you a vibration free installation. Welding and fitting required.

  • LS1 Block Hugger Tight-Fit Headers, Chrome
    LS1 Block Hugger Tight-Fit Headers, Chrome
    x
                

    Many rodders are looking to install Chevy’s powerful and efficient LS1 / LS6 Small Block V8 in their street rods, customs and classic trucks. These shorty headers can make those installations easier in a variety of applications, and help produce more power as well.

    An oxygen sensor bung is included with these block hugger headers, but not installed, for those who want to keep the engine’s electronic fuel injection. Includes bolts, gaskets, and reducers.

    LS1 Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Painless Wiring 60509 1999-2002 GM LS1 Engine Harness, Extended
    Painless Wiring 60509 1999-2002 GM LS1 Engine Harness, Extended
    x
                Please view the product's page for more information
            
  • Painless Wiring 60502 1992-1997 GM LT1 Engine Harness
    Painless Wiring 60502 1992-1997 GM LT1 Engine Harness
    x
                Take advantage of GM's electronic engine management system with this Painless Wiring Harness. Complete stand alone harness allows you to install late model GM fuel injected engine and correct computer into almost any chassis. Harness includes all connections needed for fuel injection and transmission operation: ECM, Ignition Module, IAT, CTS, Coil, Left & Right O2, EGR, MAP, IAC, Knock, Air Pump Relay, MAF, Fuel Pump Relay, Canister Purge Solenoid, VSS and 4L60E Transmission. 

    Harness includes its own fuse block with ignition relays. 4 feet of harness between ECM connections and main engine breakout gives ample room for custom installation and mounting of ECM behind dash, in the kick panel or glove box.

    Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install:
    • Foolproof factory connections
    • ALDL (diagnostic) plug
    • Computer controlled fuel pump provision
    • GM color code
    • Closed loop design

    1992-1997 GM LT1 Wiring Instructions (PDF)

  • 1955-1994 Small Block Chevy Engine Mount
    1955-1994 Small Block Chevy Engine Mount
    x
                

    Specially designed engine mount cradle to mount your 1955-1994 Chevy 265-400 small block into almost any chassis. Includes grade 5 mounting hardware. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Illustration (GIF)

    135-6023 Instructions (PDF)

  • Painless Wiring 60102 1986-1989 GM Tuned Port Mass Air Engine Harness
    Painless Wiring 60102 1986-1989 GM Tuned Port Mass Air Engine Harness
    x
                Take advantage of GM's electronic engine management system with this Painless Wiring Harness. Complete stand alone harness allows you to install late model GM fuel injected engine and correct computer into almost any chassis. Harness includes all needed connections for fuel injection operation: ECM, MAF, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, OBD1 w/SES light, VSS and TCC solenoid. 

    This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box.

    Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install:
    • Foolproof factory connections
    • ALDL (diagnostic) plug
    • Computer controlled fuel pump provision
    • Wired for 2004R or 700R4 transmission and EGR solenoid
    • GM color code
    • Closed loop design

    1986-1989 GM TPI Mass Air Flow Wiring Instructions (PDF)

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

  • 1982-1997 S-10 Motor Mounts
    $39.99
    1982-1997 S-10 Motor Mounts
    x
                This pair of motor mounts cushions is used with adapter set 720-4691 to install a Chevy V8 in place of the 4.3L V6 in '88-'00 S10/S15 2WD trucks.
  • Chevy to 1955-1959 Chevy Pickup Motor Mounts
    Chevy to 1955-1959 Chevy Pickup Motor Mounts
    x
                

    Chevy V8s into 1955-1959 Chevy pickup & panel trucks. Plates bolt in.

    One mount kit has enough brackets, cushions, bolts and hardware to do both sides of the engine.

    1955-1959 Chevy Motor Mount Installation Instructions (pdf)

  • Billet Specialties 13600 Tru Trac Serpentine System - Small Block Ford
    Billet Specialties 13600 Tru Trac Serpentine System - Small Block Ford
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Ford 289, 302, 351W come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Ford Racing reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Not for use with mechanical fuel pump. Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Ford Serpentine System Installation Instructions (PDF)

  • Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    x
                

    These rack & pinion conversion kits will finally give your 62'-67' Chevy II or Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The manual rack & pinion has been modified to match the front suspension of the Chevy II/Nova, the resulting rack & pinion is geometrically correct offering no or negligible bump steer.

    Installation is easy, the rack & pinion comes mounted to its custom mounting bracket that bolts up to the existing engine mounts. No welding or cutting involved!

    Kit includes:

    • Manual Rack & Pinion
    • Black Powdercoated Mounting Bracket
    • Steering Arms
    • Tie Rod Ends

     

  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • Trans-Dapt 4100 Chevy to Jeep Motor Mount
    Trans-Dapt 4100 Chevy to Jeep Motor Mount
    x
                

    Chevy V8s into 4 wheel drive Jeeps, model MB, CJ2, CJ3A, CJ3B, CJ5, CJ6, CJ7, and C101. Also fits some 1948-62 Utility series, station wagons, panels & Jeepsters (except J series). Frame plates weld-on.

    Chevy To Jeep Motor Mount Instructions (pdf)

  • 1928-1934 Ford Frame Adapters
    1928-1934 Ford Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most every engine into 1928-1934 Ford frames. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Guide (GIF)

  • Trans-Dapt 4102 Chevy to 1953-1964 Ford Pickup Motor Mounts
    Trans-Dapt 4102 Chevy to 1953-1964 Ford Pickup Motor Mounts
    x
                

    Chevy V8s into 1953-1964 Ford pickup & panel trucks. Plates bolt-in.

    Chevy To Ford Motor Mount Instructions (pdf)

  • 1949-1953 Ford Replacement Motor Mounts for V8 Flathead
    1949-1953 Ford Replacement Motor Mounts for V8 Flathead
    x
                

    It would be foolish not to replace those 60+ year old motor mounts. Replace them with these new mounts, designed to fit 1949-53 Fords. Set of two mounts for V8 Flathead. Fits: Victoria, Woody, Woodie, Convertible, Crestliner, Coupe, 2 door sedan, 4 door, tudor, fordor and Country squire with flathead V-8.

    • 1949-53 Ford V-8 Flathead
    • OEM replacement
    • Set of two

    Flathead V8 Engine Motor Mounts Installation Instructions (pdf)

  • Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    Ansen 6872 1953-1964 Ford Pickup Frame Adapter
    x
                

    This specially designed frame adapter allows professional installation of almost any engine into the 1953-1964 Ford pickup frame. Heavy duty construction is designed to mount large motors.

    Engine Mounting Guide

    1. Combine with one of the following motor mounts:
    2. Then add our cushion kit 720-9314 to finish your conversion.
  • 1958-1964 Chevy 348-409 Engine Mount
    1958-1964 Chevy 348-409 Engine Mount
    x
                

    Specially designed engine mount cradle to mount your 1958-1964 Chevy 348-409 W-motor into almost any chassis. Includes Grade 5 mounting hardware. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    Engine Mounting Illustration (GIF)

    135-3272 Instructions (PDF)

  • 1932 Lo-Boy Small Block Chevy Engine Mount Option
    1932 Lo-Boy Small Block Chevy Engine Mount Option
    x
                

    Stuff a S/B Chevy into your '32 Lo-Boy and you'll have one wild ride! For even more performance and a more compact installation, use our LS-series engine adapter brackets (916-18016) to mount Chevy's late model all-aluminum V-8.

    Kit includes (2) frame adapter brackets & (1) fiberglass firewall distributor recess bulge.

  • Professional Products 70027 Powerjection III EFI System, Polished
    Professional Products 70027 Powerjection III EFI System, Polished
    x
                Please view the product's page for more information
            
  • Chevrolet Style Motor Mount Bolt Kit
    $4.99
    $8.00
    New
    Chevrolet Style Motor Mount Bolt Kit
    x
                

    These quality engine mount bolt kits are designed for use with Small Block and Big Block Chevy style motor mounts.  They feature a zinc coating with solid steel construction and come with all necessary bolts needed for a successful installation.

    • For SBC and BBC motor mounts
    • Zinc finish, steel construction
    • 3/8"-16 thread
    • Sold as a kit
  • 1964-1974 Big Block Chevy Long Tube Headers, Chrome
    New
    1964-1974 Big Block Chevy Long Tube Headers, Chrome
    x
                
    These chrome headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with:

    • installation hardware
    • collector reducers
    • gaskets 
    • instructions
  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Bolt-In 1935-40 Ford Mustang II Crossmember
    Bolt-In 1935-40 Ford Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Painless Wiring 60103 1990-92 GM TPI Speed Density Engine Harness
    Painless Wiring 60103 1990-92 GM TPI Speed Density Engine Harness
    x
                

    Take advantage of GM's electronic engine management system with this Painless Wiring Harness. Complete stand alone harness allows you to install late model GM fuel injected engine and correct computer into almost any chassis. Harness includes all needed connections for fuel injection operation: ECM, MAP, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, OBD1 w/SES light, VSS and TCC solenoid. 

    This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under or behind the dash or glove box.

    Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install:
    • Foolproof factory connections
    • ALDL (diagnostic) plug
    • Computer controlled fuel pump provision
    • Wired for 2004R or 700R4 transmission and EGR solenoid
    • GM color code
    • Closed loop design

    1990-1992 GM TPI Wiring Instructions (PDF)

  • 1949-1953 Ford/Mercury Frame Adapters
    1949-1953 Ford/Mercury Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most every engine into 1949-1953 Ford/Mercury passenger car frames. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Illustration (GIF)

     

    135-3294 Instructions (PDF)

  • 1965-1994 Big Block Chevy 396-454 Engine Mount
    1965-1994 Big Block Chevy 396-454 Engine Mount
    x
                

    Specially designed engine mount cradle to mount your 1965-1994 Chevy 396-454 Big Block into almost any chassis. Includes Grade 5 mounting hardware. Add one of our frame mount kits and a universal bolt-through cushion kit for a professional installation.

    135-6852 Instructions (PDF)

  • Small Block Ford, Block Hugger Tight-Fit Headers, Chrome
    Small Block Ford, Block Hugger Tight-Fit Headers, Chrome
    x
                

    For years it seemed like installing a 289-302-351W Ford in your street rod was a far bigger challenge than using a small-block Chevy. One significant problem was finding compact shorty headers. Well, problem solved! These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible block hugger headers installations much easier to tackle. 

    For factory style oval port heads. Will work with GT40P heads. Includes 2.5" collector reducers to 2.25" pipe, gaskets and bolts.

    • Must be used with 910-67210 (Fuel Injected Engines) or 910-67462 (Carbureted Engines) style mini starter or equivalent compact starter
    • We recommend motor mounts 270-2221 (Left) and 270-2220 (Right)
    • Left mount may need to be ground 1/4” to provide clearance for collector
    • Chrome headers are polished before and after plating for show quality appearance
    • Fits engines with forward sump oil pans

    930-0201 Instructions (PDF)

    S/B Ford Header Dimension Chart (GIF) 

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the

  • Bolt-On Motor Mounts
    $89.99
    Product Rating: 3.00 Stars
    Bolt-On Motor Mounts
    x
                Some chassis have no room for an engine mount crossmember. For them we offer these mounts. Bolt-to-frame brackets are easy to install. Heliarc welded steel. Mounts S/B Chevy on 1935-1940 Ford frame rails.
            
  • 1949-1954 Chevy Frame Adapters
    1949-1954 Chevy Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most Chevy V8 engines into 1949-1954 Chevy passenger car frames. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Illustration (GIF)

  • Tight-Fit Stainless Steel Small Block Chevy Block Hugger Headers
    Tight-Fit Stainless Steel Small Block Chevy Block Hugger Headers
    x
                Please view the product's page for more information
            
  • Painless Wiring 60508 1999-2002 GM LS1 Engine Harness
    Painless Wiring 60508 1999-2002 GM LS1 Engine Harness
    x
                Take advantage of GM's electronic engine management system with this Painless Wiring Harness. Complete stand alone harness allows you to install late model GM fuel injected engine and correct computer into almost any chassis. 

    Besides the obvious economy and driveability benefits, check out these other great features that make it easy and painless to install:
    • Foolproof factory connections
    • ALDL (diagnostic) plug
    • Computer controlled fuel pump provision
    • GM color code
    • Closed loop design
    • Complete information manual

    1999-2002 GM LS1 Wiring Instructions (PDF)

  • 1955-57 Chevy Frame Adapters
    $39.99
    1955-57 Chevy Frame Adapters
    x
                

    Specially designed frame adapters allow professional installation of most Chevy V8 engines into your 1955-1957 Chevy passenger car frame. Designed for use with engine mounts and cushion kit found on this page.

    Engine Mounting Illustration (GIF)

  • AFCO 20022 Perfect Fit 1979-2004 Mustang Tubular K-Members
    AFCO 20022 Perfect Fit 1979-2004 Mustang Tubular K-Members
    x
                

    Features an exclusive 1-piece DOM main rail for superior strength with significant weight savings versus the stock Fox Body and SN-95 K-members. Available with various engine mounting options (K-members do not include motor mounts).

    • Retains factory geometry, wheel base & track width
    • Accepts stock steering rack 
    • Can be used with factory lower control arms
    • Sheds 27 lbs. from your front end
    • Sheds up to 42 lbs. when used with AFCO lower control arms
    • Bolts-on at home with no special tools needed
    • Slotted rear mounts accomodate factory tolerances
    • Reinforced, fully machined upper mounts guarantee a precise fit
    • Nut retention system allows easy, one wrench installation
    • Brilliant, powder coat finish for long life
    • Superior strength-to-weight ratio to handle wheel stands

    106-20022 Instructions (PDF)

    NOTE: Must be used with lower control arm hardware kit 106-200017 and AFCO strut/coil-over package 106-30022 or 106-29022.

  • AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 12