Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"edelbrock choke carb" Page 1 of 3

  • Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
    Edelbrock 1404 Performer 500 CFM 4 Barrel Carburetor, Manual Choke
    x
                Please view the product's page for more information
            
  • Edelbrock 14053 Performer 600 CFM 4 Barrel Carb, Manual Choke, Black
    Edelbrock 14053 Performer 600 CFM 4 Barrel Carb, Manual Choke, Black
    x
                Please view the product's page for more information
            
  • Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    Edelbrock 14073 Performer 4 Barrel Carb, 750 CFM, Manual Choke, Black
    x
                Please view the product's page for more information
            
  • Edelbrock 14063 Performer 600 CFM 4 Barrel Carb, Electric Choke, Black
    Edelbrock 14063 Performer 600 CFM 4 Barrel Carb, Electric Choke, Black
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). 

    These Performer Series carburetors with black powder coated finish feature gold iridited linkage and hardware that complements the new finish. When matched with Edelbrock's black powder coated intake manifolds, water pumps and accessories, they give any engine bay a custom appearance.

    This new finish will also give these carburetors a durable protective layer that will keep them looking great for many years. All Edelbrock Performer Series carburetors feature factory set float levels that rarely need ad

  • Edelbrock 1403 Performer 500 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1403 Performer 500 CFM 4 Barrel Carburetor, Electric Choke
    x
                Please view the product's page for more information
            
  • Edelbrock 1806 Thunder Series AVS 650 CFM 4 Barrel Carb-Electric Choke
    Edelbrock 1806 Thunder Series AVS 650 CFM 4 Barrel Carb-Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. This four barrel carb matches with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1804 Dual Quad 4 Barrel Carburetor, 500 CFM, Manual Choke
    Edelbrock 1804 Dual Quad 4 Barrel Carburetor, 500 CFM, Manual Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1803 Dual Quad 4 Barrel Carburetor, 500 CFM, Electric Choke
    Edelbrock 1803 Dual Quad 4 Barrel Carburetor, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle.This four barrel carb can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1801 AVS 4 Barrel Carburetor, 500 CFM, Electric Choke
    Edelbrock 1801 AVS 4 Barrel Carburetor, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Edelbrock carburetors bolt on and run right out of the box
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18014 Endurashine AVS 4 Barrel Carb, 500 CFM, Electric Choke
    Edelbrock 18014 Endurashine AVS 4 Barrel Carb, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18024 Endurashine AVS 4 Barrel Carb, 500 CFM, Manual Choke
    Edelbrock 18024 Endurashine AVS 4 Barrel Carb, 500 CFM, Manual Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
    Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18044 Endurashine Dual Quad 500 CFM 4 Barrel Carb-Man. Choke
    Edelbrock 18044 Endurashine Dual Quad 500 CFM 4 Barrel Carb-Man. Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for dual-quad applications such as the RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Two-piece design means no gaskets below the fuel level for leak-free operation
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock Dual Quad 4 Barrel Carb Installation Instructions (PDF)

  • Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    Edelbrock 18064 Endurashine AVS 4 Barrel Carb, 650 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1411 Performer 750 CFM 4 Barrel Carburetor, Electric Choke
    Edelbrock 1411 Performer 750 CFM 4 Barrel Carburetor, Electric Choke
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock 4 barrel carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds and other brands of similar design, these four barrel carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.

    • Electric choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1412 Performer 4 Barrel Carburetor, 800 CFM, Manual Choke
    Edelbrock 1412 Performer 4 Barrel Carburetor, 800 CFM, Manual Choke
    x
                

    Edelbrock Performer Series carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock four barrel carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 800 CFM four barrel carburetor is calibrated for maximum street performance on large cubic-inch engines with dual-plane manifolds. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Manual choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 800 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    Edelbrock 1413 Performer 4 Barrel Carburetor, 800 CFM, Electric Choke
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately.

    • Electric choke 
    • Smooth throttle response throughout the power band
    • Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
    • Float levels are factory set; adjustments are rarely needed
    • Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
    • Lightweight all-aluminum body is compatible with gasohol and blended fuels
    • Includes both timed and full vacuum ports for ignition advance

    Edelbrock 800 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric Choke
    Edelbrock 14064 Endurashine Performer 600 CFM 4 BBL Carb, Electric Choke
    x
                

    Edelbrock Performer Series 4 barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, this Edelbrock carb is the best choice for performance and value. All Edelbrock products are proudly made in the U.S.A.

    CALIBRATED FOR FUEL ECONOMY
    Designed for small-block and small displacement big-block engines, this four barrel carb is recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold and other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring yellow (4" Hg). Includes an electric choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Easy to tune with great driveability
    • 600 CFM
    • Electric choke
    • Ford/Mopar arms sold separately

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Three Chrome 9 Super 7   Carbs on Edelbrock 1108 Intake Kit, 1938-48 Ford V8
    Three Chrome 9 Super 7 Carbs on Edelbrock 1108 Intake Kit, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Three Chrome 9 Super 7   Carbs, Edelbrock 1109 Intake Kit, 1949-53 Ford V8
    Three Chrome 9 Super 7 Carbs, Edelbrock 1109 Intake Kit, 1949-53 Ford V8
    x
                Please view the product's page for more information
            
  • Three Plain 9 Super 7   Carbs on an Edelbrock 1108 Intake, 1938-48 Ford V8
    Three Plain 9 Super 7 Carbs on an Edelbrock 1108 Intake, 1938-48 Ford V8
    x
                Please view the product's page for more information
            
  • Three Chrome 9 Super 7   Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    Three Chrome 9 Super 7 Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three chrome plated carbs, the plain finish aluminum intake, 4" chrome air cleaners, linkage kit, chrome fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carbure

  • Three Plain 9 Super 7   Carbs on an Edelbrock 1109 Intake, 1949-53 Ford V8
    Three Plain 9 Super 7 Carbs on an Edelbrock 1109 Intake, 1949-53 Ford V8
    x
                Please view the product's page for more information
            
  • Edelbrock 1407 Performer 4 Barrel Carburetor, 750 CFM, Manual Choke
    Edelbrock 1407 Performer 4 Barrel Carburetor, 750 CFM, Manual Choke
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 750 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    Edelbrock 750 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    x
                

    Edelbrock's famous Performer manifold is designed for street 1955-86 small block Chevys. This manifold is a stock replacement/street legal part for 302/327/350 V8s with OEM 4 bbl. or Edelbrock Performer Series carbs. Will also work on 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR.

    Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. 

    Made in the U.S.A. 

    325-2101 Instructions (PDF)

    NOTE: This intake does not work with kickdown kit 491-2350U.

  • Edelbrock Small Block Chevy Dual Quad Set-Up
    Edelbrock Small Block Chevy Dual Quad Set-Up
    x
                

    There is nothing sweeter looking or sounding than a dual quad on a Chevy!  This one kit gets you two manual choke Edelbrock carbs, an Edelbrock unpolished intake manifold, fuel line and special progressive linkage.  Just add a suggested air cleaner to finish your installation. Will clear HEI distributors. 6-7/16" carb centers. 

    • 1957-86 262-400 small block
    • (2) 500 cfm manual choke carbs
    • C-26 Dual-Quad manifold
    • 1500-5000 rpm
    • Low profile for hood clearance on most vehicles

  • Edelbrock 1152 94 Two-Barrel Secondary Carburetor
    Edelbrock 1152 94 Two-Barrel Secondary Carburetor
    x
                Please view the product's page for more information
            
  • Plain 9 Super 7   Carbs on Edelbrock 1100 Intake Manifold, 1938-48 Ford V-8
    Plain 9 Super 7 Carbs on Edelbrock 1100 Intake Manifold, 1938-48 Ford V-8
    x
                Please view the product's page for more information
            
  • Edelbrock 14054 Performer 600 CFM 4 Barrel Carb, Manual, Endura Shine
    Edelbrock 14054 Performer 600 CFM 4 Barrel Carb, Manual, Endura Shine
    x
                

    Edelbrock Performer Series four barrel carbs have proven themselves to be easy to tune with great drivability. Whether you need to replace an aging stock carb or are looking for a performance 4 barrel carb to top off your hot rod, the Edelbrock Performer Series carbs are the best choice for performance and value. All Edelbrock parts are proudly made in the U.S.A.  

    This 600 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design. Includes manual choke and detailed instructions. Ford/Mopar throttle adapter arms sold separately. 

    • Match with variety of manifolds - Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II
    • Now available in a polished Endura Shine finish
    • Manual Choke
    • Made in USA for unsurpassed quality and performance!

    Edelbrock 600 CFM 4 Barrel Carburetor Installation Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3