Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"drum brake disc brake conversion" Page 1 of 1

  • Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    x
                
    This kit allows you to upgrade your 1949-1954 Chevy car to front disc brakes and retain the original 5 on 4-3/4 inch bolt pattern. Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This kit includes everything you need to convert your stock 1949-1954 Chevy car to disc brakes. 
    • Works with stock passenger car spindles
    • No machining required
    • 11" diameter vented rotors
    • 2-1/2" single-piston brake calipers
    • 5 on 4-3/4 inch bolt pattern
    • Works with most 15" diameter wheels
    • Not for straight axle
    • Works best with 1949-54 Chevy brake pedal/master/booster assembly 910-19542

    Instructions (PDF)

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407140 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    Wilwood 140-7139 Rear Disc Brake Kit, Big Ford 9 Inch, Old 2.36 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" NPT inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407139 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Wilwood 140-7143 Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                

    Wilwood Dynalite rear brake kits combine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.  

    The emergency brake functions as a drum brake hidden within the mounting hat of the rotor for a clean installation. E-brake cables sold separately. Caliper has a 1/8" npt inlet.

    • Big 12.19" x .810" one-piece vented rotors
    • Rotors drilled to accept 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt patterns
    • Forged billet four-piston calipers
    • BP-10 Smart pads for a quick response and fade resistance
    • Aluminum mounting brackets
    • Includes all hardware

    835-1407143 Instructions (PDF)

    Axle Flange Identification Chart  (GIF)

  • Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    x
                

    Use this great conversion kit to make your old Chevy stop safely and reliably when converted over to an automatic transmission application. Use in conjunction with front disc brake conversion 910-1954 and rear drum brakes.

    • Direct bolt in for 1949-54 Chevy cars
    • Corvette-style dual reservoir master cylinder
    • 7" dual diaphragm booster
    • Black powder coat and gold zinc finish
    • For disc/drum applications
    • Modification to stock brake lines required
    • For automatic transmission application only

    Works well when used with 1949-54 Chevy car front disc brake conversion kit 910-1954.

  • 1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passenger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

    Rotor Diameter:  11"
    Caliper Piston Diameter:  2.8"
    Caliper Inlet:  7/16"-20
    Booster Type:  Single Diaphragm (Stock Type) 
    Booster Diameter:  11"
    Proportioning Valve Type:  Disc Front/Drum Rear
    Proportioning Valve Ports:  3/8"-24 Front, 9/16"-18 Rear
    Recommended Brake Line:  3/16" Steel 

  • 1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    • Master cylinder has outlets on both sides for ease of plumbing
    • 1/2"-20 and 9/16"-18 outlets

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • SSBC Mustang II Competition Street Series 11 Inch Disc Brake Kit
    SSBC Mustang II Competition Street Series 11 Inch Disc Brake Kit
    x
                

    Bolt-in ultra high performance disc brake conversion kit for Mustang II. Kit includes street 4-piston aluminum calipers with 45mm stainless pistons, performance brake pads, mounting brackets, 11" Big Bite cross drilled rotors, and hardware.

    • 100% Made in the USA
    • Rotors are dual pattern - 5 on 4.5" & 5 on 4.75"
    • 15" wheel compatible
    • Calipers are constructed from 6061-T6 billet aluminum
    • Assembled with stainless steel pistons and bleeder screws
    • 25% more pad contact area than other calipers with this mount
    • 20% thicker pads than other calipers with this mount
    • Dual pad pin design with o-rings to eliminate pad chatter
    • Use any off-the-shelf D43 pad from any local parts store

    Calipers are available in plain finish (clear coated) billet, fully polished, red powder coat, or black powder coat.

  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1964-1966 Mustang Disc Brake Kit
    1964-1966 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your vintage Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1964-1966 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Only works on V8 drum brake spindles. 
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes.
    • Fits inside 14" x 7" or larger wheels

    Kit includes:

    • 43mm Four-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 1.94 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Wilwood aluminum rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 1.94" backspace.

    NSRA Legal

    910-31934 Instructions (PDF)

  • 1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for front disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all front disc brake conversions.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • GM style proportioning/metering combination valve
    • Master cylinder has outlets on both sides for ease of plumbing
    • Includes plugs for unused outlets on opposite side of master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1955-57 Chevy Car Brake Booster Combo, Disc/Drum
    1955-57 Chevy Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1955-57 Chevy car you should update the master cylinder as well. The stock 4-wheel drum master does not have the capacity to supply the proper amount of pressure for front disc brakes, so for best results, we recommend using this combo kit with any front disc brake conversion kit.

    • Bolt-on assembly works with stock pedal
    • Uses common 1" bore master cylinder
    • 8" dual diaphragm booster
    • Angled booster-to-firewall mounting bracket gives additional valve cover clearance

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    Speedway Rear Disc Brake Kit with Emergency Brake, 3 Inch Backspace
    x
                Replace those old drum brakes with modern rear disc brakes. This affordable rear disc brake kit conversion gives you an emergency brake just like your family car has. The steel caliper bracket welds to your 3" axle tube, so it will fit virtually any application. The calipers accept either GM or Lokar type E-brake cables and are tapped to accept the common 7/16"- 20 banjo fittings. The 11-3/4" x .81" vented iron rotors will give you plenty of stopping power. 

    Steel rotor hat fits 5 on 4-1/2", 5 on 4-3/4", and 5 on 5" bolt patterns and has a 3" backspace.

    NSRA Legal

    910-31933 Instructions (PDF)

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • GM Midsize Brake Kit for 910-34923 Spindles
    GM Midsize Brake Kit for 910-34923 Spindles
    x
                

    Disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.

    Spindles sold separately.

    910-31995 Instructions (PDF)

  • 1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1965-69 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • 1963-66 Chevy Pickup Brake Power Booster Kit
    1963-66 Chevy Pickup Brake Power Booster Kit
    x
                

    Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 8" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Power Brake Kit for 1964-66 Ford Mustang with Automatic Transmission
    New
    Power Brake Kit for 1964-66 Ford Mustang with Automatic Transmission
    x
                
    Complete the disc brake conversion on your 1964-66 Mustang (or enhance your existing brake system) with this high quality master cylinder and brake booster kit. It includes a 7" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1964-66 Ford Mustangs. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.
    • For 64-66 Mustang originally equipped with an automatic transmission
    • 7" single booster with brackets and extension
    • Includes master cylinder, booster, and proportioning valve

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

     

  • 1970 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1970 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1970 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • 1963-64 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1963-64 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1963-64 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • 1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
    x
                

    Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.

    The optional disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Brake kit sold separately.

    • 2" drop
    • Completes both sides
    • Maintains factory steering & suspension geometry
    • Includes midsize caliper bracket & bolts

    Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.

    910-34923 Instructions (PDF)

  • SSBC 1964-74 GM Competition Drum to Disc Brake Conversion
    Garage Sale
    SSBC 1964-74 GM Competition Drum to Disc Brake Conversion
    x
                

    Bolt-in ultra high performance disc brake conversion kit for 1964-74 GM A, F, & X Body. Kit includes street 4-piston aluminum calipers with 45mm stainless pistons, performance brake pads, mounting brackets, 11" Big Bite cross drilled rotors, and hardware.

    • 100% Made in the USA 
    • 15" wheel compatible
    • Calipers are constructed from 6061-T6 billet aluminum
    • Assembled with stainless steel pistons and bleeder screws
    • 25% more pad contact area than other calipers with this mount
    • 20% thicker pads than other calipers with this mount
    • Dual pad pin design with o-rings to eliminate pad chatter
    • Use any off-the-shelf D43 pad from any local parts store

    Calipers are available in plain finish (clear coated) billet, fully polished, red powder coat, or black powder coat.

  • Garage Sale - SSBC 1964-74 GM Competition Drum To Disc Brake Conversion
    Garage Sale
    Garage Sale - SSBC 1964-74 GM Competition Drum To Disc Brake Conversion
    x
                Please view the product's page for more information
            
  • Garage Sale - Wilwood Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    Garage Sale
    Garage Sale - Wilwood Rear Disc Parking Brake Kit, Ford 9 Inch, 2.66 Offset
    x
                Please view the product's page for more information
            
  • Garage Sale - 1955-64 Chevy Full-Size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    Garage Sale
    Garage Sale - 1955-64 Chevy Full-Size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    This kit is garage sale priced because it is missing the prop valve.  What you see is what you get.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1958-70 GM B Body 2 Inch Drop Spindles
    Garage Sale
    Garage Sale - 1958-70 GM B Body 2 Inch Drop Spindles
    x
                

    This 2" drop spindle the newest 1958-70 full size spindle to date. For use when you want to lower your disc brake converted car a full 2", can be used on 1958-64 models that already been upgraded with one of CCP's stock spindle disk kits. Requires caliper bracket part #5870DBK-D (sold separately, not sold by Speedway).1965-70 models require purchase of an 11" disc conversion kit. Big brake kits (13") also available. these spindles are precision cast from high quality Ductile Iron, with 4140 Chrom-moly CNC machined pins. Accepts the factory ball joints and stick steering arms. These are the best engineered, and best fitting drop spindles for your vintage Chevy. NOTE: will not work with drum brakes. Works on most 15" or larger disk brake wheels.

     

    These spindles are garage sale priced because they are different than what we currently offer.

     

     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - 58-64 Booster & Master Cylinder Kit
    Garage Sale
    Garage Sale - 58-64 Booster & Master Cylinder Kit
    x
                Please view the product's page for more information
            
  • Garage Sale - 1955-57 Chevrolet Fullsize Car 2 Inch Drop Spindles
    Garage Sale
    Garage Sale - 1955-57 Chevrolet Fullsize Car 2 Inch Drop Spindles
    x
                

    This 2” drop spindle is our newest 1955-57 fullsize spindle to date. For use when you want to lower your disc brake converted car a full 2", can be used on 1958-64 models that have already been upgraded with one of CPP's stock spindle disc kits. Requires caliper bracket part #5870DBK-D (sold separately, Not offered by Speedway). 1955-57 and 1965-70 models require purchase of a disc conversion kit. These spindles are precision cast from high quality Ductile Iron, with 4140 Chrom-moly CNC machined pins. Accepts the factory ball-joints and stock steering arms. These are the best engineered, and best fitting drop spindles available for your vintage Chevy! Note: will not work with drum brakes. Works with most 15” or larger disc brake wheels.

     

    These spindles are garage sale priced because they  are different than what we currently offer.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 1963-66 Chevy Pickup Brake Power Booster Kit
    Garage Sale
    Garage Sale - 1963-66 Chevy Pickup Brake Power Booster Kit
    x
                

    Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 9" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications and comes complete with installation hardware.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection 

     

    This is garage sale priced because it is missing the proportioning valve and master cylinder brake lines.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • Garage Sale - US Brake 1971-80 Front Brake Kit for Pinto
    Garage Sale
    Garage Sale - US Brake 1971-80 Front Brake Kit for Pinto
    x
                Please view the product's page for more information
            
  • Garage Sale - 1963-64 Chevy Truck 5-Lug Rear Axle Conversion Kit
    Garage Sale
    Garage Sale - 1963-64 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1963-64 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs.  

     

    This is garage sale priced because it has been installed on a car and does not include a gasket.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS