Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"drum brake booster" Page 1 of 1

  • 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    x
                

    When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.

    • Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
    • Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
    • Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Single Diaphragm Chrome Booster Master Cylinder Combo
    Single Diaphragm Chrome Booster Master Cylinder Combo
    x
                

    These show-quality brake combos come with a 7" single diaphragm chrome plated steel booster and a chrome master cylinder with a 1" bore and dual 3/8"-24 IFF outlets (on both sides). Includes plugs for unused ports.

    Suitable for use with front disc/rear drum brake systems.

    Booster Tech Tip (GIF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    x
                

    When you put modern front & rear disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. Why not use one of these simple bolt-on power brake systems? Kits contain a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a knob style proportioning/metering valve. Also includes the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.

    Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual Diaphragm Stainless Booster Master Cylinder Combo
    Dual Diaphragm Stainless Booster Master Cylinder Combo
    x
                

    These show-quality brake combos come with a 7" dual diaphragm stainless steel booster and a chrome master cylinder with a 1" bore and dual 3/8"-24 IFF outlets (on both sides). Includes plugs for unused ports.

    Suitable for use with front disc/rear drum brake systems.

    Booster Tech Tip (GIF) 

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

     

  • 1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    • Master cylinder has outlets on both sides for ease of plumbing
    • 1/2"-20 and 9/16"-18 outlets

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    Speedway 1949-54 Chevy Passenger Car Disc Brake Conversion Kit
    x
                
    This kit allows you to upgrade your 1949-1954 Chevy car to front disc brakes and retain the original 5 on 4-3/4 inch bolt pattern. Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This kit includes everything you need to convert your stock 1949-1954 Chevy car to disc brakes. 
    • Works with stock passenger car spindles
    • No machining required
    • 11" diameter vented rotors
    • 2-1/2" single-piston brake calipers
    • 5 on 4-3/4 inch bolt pattern
    • Works with most 15" diameter wheels
    • Not for straight axle
    • Works best with 1949-54 Chevy brake pedal/master/booster assembly 910-19542

    Instructions (PDF)

  • 1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for front disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all front disc brake conversions.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • GM style proportioning/metering combination valve
    • Master cylinder has outlets on both sides for ease of plumbing
    • Includes plugs for unused outlets on opposite side of master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1955-57 Chevy Car Brake Booster Combo, Disc/Drum
    1955-57 Chevy Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1955-57 Chevy car you should update the master cylinder as well. The stock 4-wheel drum master does not have the capacity to supply the proper amount of pressure for front disc brakes, so for best results, we recommend using this combo kit with any front disc brake conversion kit.

    • Bolt-on assembly works with stock pedal
    • Uses common 1" bore master cylinder
    • 8" dual diaphragm booster
    • Angled booster-to-firewall mounting bracket gives additional valve cover clearance

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passenger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

    Rotor Diameter:  11"
    Caliper Piston Diameter:  2.8"
    Caliper Inlet:  7/16"-20
    Booster Type:  Single Diaphragm (Stock Type) 
    Booster Diameter:  11"
    Proportioning Valve Type:  Disc Front/Drum Rear
    Proportioning Valve Ports:  3/8"-24 Front, 9/16"-18 Rear
    Recommended Brake Line:  3/16" Steel 

  • Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    x
                

    Use this great conversion kit to make your old Chevy stop safely and reliably when converted over to an automatic transmission application. Use in conjunction with front disc brake conversion 910-1954 and rear drum brakes.

    • Direct bolt in for 1949-54 Chevy cars
    • Corvette-style dual reservoir master cylinder
    • 7" dual diaphragm booster
    • Black powder coat and gold zinc finish
    • For disc/drum applications
    • Modification to stock brake lines required
    • For automatic transmission application only

    Works well when used with 1949-54 Chevy car front disc brake conversion kit 910-1954.

  • Dual 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Dual 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                

    Compact 7" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Dual 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                

    Compact 7" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 8 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Dual 8 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                

    Compact 8" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 8 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Dual 8 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                

    Compact 8" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Chrome Power Brakes Master Cylinder
    Chrome Power Brakes Master Cylinder
    x
                

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets (includes 2 plugs for unused ports).

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1964-1966 Mustang Disc Brake Kit
    1964-1966 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your vintage Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1964-1966 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Only works on V8 drum brake spindles. 
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes.
    • Fits inside 14" x 7" or larger wheels

    Kit includes:

    • 43mm Four-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • Electric Power Master Cylinder - Disc/Drum
    Electric Power Master Cylinder - Disc/Drum
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. For disc/drum applications.

    104-10562 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The pushrod h
  • 1963-66 Chevy Pickup Brake Power Booster Kit
    1963-66 Chevy Pickup Brake Power Booster Kit
    x
                

    Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 8" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • Power Brake Kit for 1964-66 Ford Mustang with Automatic Transmission
    New
    Power Brake Kit for 1964-66 Ford Mustang with Automatic Transmission
    x
                
    Complete the disc brake conversion on your 1964-66 Mustang (or enhance your existing brake system) with this high quality master cylinder and brake booster kit. It includes a 7" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1964-66 Ford Mustangs. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.
    • For 64-66 Mustang originally equipped with an automatic transmission
    • 7" single booster with brackets and extension
    • Includes master cylinder, booster, and proportioning valve

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

     

  • Power/Manual Master Cylinder, 1-1/8 Inch Bore
    Power/Manual Master Cylinder, 1-1/8 Inch Bore
    x
                

    Corvette-style master cylinder has a 1-1/8" bore and is suited for disc/drum combinations. Features dual outlets so the plumbing can come out either side of the master cylinder. These master cylinders will work with manual or power brake systems. They come with a deep-well piston for manual brakes and an adapter to fill the deep well for use with a power booster.

    • 3/8"-24 IFF outlet ports
    • Plugs are included for the unused ports
    • Mount spacing is 3-3/8" on center
    • Works with power or manual brake systems

    Brake System Builder's Tip (Link)

    Note: Customers intending to use this as a manual brake pedal assembly should note that the pushrod and boot are not included.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Electric Power Master Cylinders - Disc/Disc
    Electric Power Master Cylinders - Disc/Disc
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. Available for disc/disc or disc/drum applications.

    104-10564 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The

  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • GM Midsize Brake Kit for 910-34923 Spindles
    GM Midsize Brake Kit for 910-34923 Spindles
    x
                

    Disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.

    Spindles sold separately.

    910-31995 Instructions (PDF)

  • GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    GM Metric Disc Brake Kit for 910-34921 1955-57 2" Drop Spindles
    x
                

    Disc brake kit features 10-½” GM vented cast iron rotors and 1978-88 GM metric single piston calipers.

    • 10-1/2" rotors (O.E. on 1979-81 GM Midsize: Malibu, Monte Carlo, Cutlass, Regal, etc.) 
    • 5 x 4-3/4" bolt pattern
    • Rubber Brake Lines
    • 1978-88 GM Metric Calipers
    • 7/16"-20 inlet fitting
    • Includes all hardware: pads, slide bolts, seals, inner & outer wheel bearings, spindle nuts, dust caps

    Spindles sold separately.

    910-31992 Instructions (PDF)

  • Garage Sale - 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    Garage Sale
    Garage Sale - 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    x
                

    When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.

    • Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
    • Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
    • Measures 14-1/4" from firewall bracket to end of master cylinder. 
    This brake kit is garage sale priced because it has been partially bolted on and returned.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Universal Brake Pedal/7 Inch Power Booster/1 Inch Master Cylinder Unit
    Universal Brake Pedal/7 Inch Power Booster/1 Inch Master Cylinder Unit
    x
                
    • Unit mounts under floor
    • Bolt-on bracket to frame rail
    • Mounting bracket sets off frame rail 2" for clearance
    • 7" single diaphragm booster, 1" bore master cylinder, and 10-1/2" pedal assembly
    • For disc/drum and drum/drum applications
    • 1/2" & 9/16" IFF outlets on the master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article, Brake System Selection.

  • Garage Sale - 1955-64 Chevy Full-Size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    Garage Sale
    Garage Sale - 1955-64 Chevy Full-Size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    This kit is garage sale priced because it is missing the prop valve.  What you see is what you get.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - 1955-57 Chevy Brake Booster Master Cylinder Combo
    Garage Sale
    Garage Sale - 1955-57 Chevy Brake Booster Master Cylinder Combo
    x
                

    When you put modern disc brakes on your '55-'57 Chevy car you should update the master cylinder as well. Why not use one of these simple bolt-on power brake systems? Kits contain a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, dual diaphragm booster, and proportioning valve.

    For disc/disc or drum/drum set-up.

     

    This item is garage sale priced because it is missing the clevis.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - 58-64 Booster & Master Cylinder Kit
    Garage Sale
    Garage Sale - 58-64 Booster & Master Cylinder Kit
    x
                Please view the product's page for more information
            
  • Garage Sale - Chrome Power Brakes Master Cylinder
    Garage Sale
    Garage Sale - Chrome Power Brakes Master Cylinder
    x
                

    This master cylinder is garage sale priced because it has been installed and returned.  This one has had fluid in it. 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets 

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection 

  • Garage Sale - Chrome 1" Master Cylinder
    Garage Sale
    Garage Sale - Chrome 1" Master Cylinder
    x
                

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets (includes 2 plugs for unused ports).

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection 
     
    This is Garage Sale priced because it does not include lid.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  
  • Garage Sale - 1963-66 Chevy Pickup Brake Power Booster Kit
    Garage Sale
    Garage Sale - 1963-66 Chevy Pickup Brake Power Booster Kit
    x
                

    Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 9" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications and comes complete with installation hardware.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection 

     

    This is garage sale priced because it is missing the proportioning valve and master cylinder brake lines.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS   

  • GARAGE SALE - CHROME 1" BORE MASTER CYL
    Garage Sale
    GARAGE SALE - CHROME 1" BORE MASTER CYL
    x
                

     

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets (includes 2 plugs for unused ports).

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

     

    This is Garage Sale priced because it does not include a lid gasket.

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Chrome 1" Bore Master Cylinder
    Garage Sale
    Garage Sale - Chrome 1" Bore Master Cylinder
    x
                

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets.

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.


    This is Garage Sale priced because it is missing cap, gasket, and the two cap hold down wires.
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS