Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"drum brake bearing" Page 1 of 3

  • 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    x
                

    When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.

    • Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
    • Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
    • Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Ford F-100 Brake to 1937-48 Spindle Bearing Conversion Kit
    Ford F-100 Brake to 1937-48 Spindle Bearing Conversion Kit
    x
                

    Kit allows you to install 1953-1956 Ford F-100 11" x 2" drum brakes on your 1937-1948 Ford car spindles. Kit includes new bearings and seals to allow conversion. 

    You must supply 1953-1956 F-100 front backing plates, hubs and 1953-1966 brake drums. Minor grinding required on 1937-1941 spindles.

    Tech Tip: If replacing all brake hardware, 1966 F-100's had self adjusting brakes.

    916-31934 Instructions (PDF)

  • Universal Power/Manual Master Cylinder, 1 Inch Bore, Corvette-Style
    Universal Power/Manual Master Cylinder, 1 Inch Bore, Corvette-Style
    x
                Please view the product's page for more information
            
  • Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    Ford Racing 11 Inch Drum Brake Kit, 2-1/2 Offset
    x
                We offer these rear drum brake kits for popular 9" Ford rear axles. Each kit has new 11" x 2-1/4" drums, backing plates, shoes, wheel cylinders, springs, emergency brake arm and hardware.  

    Fits New style Big Ford housing with 2-1/2" axle offset and 3.15" axle bearing. Drums drilled for 5 on 4-1/2" bolt pattern.

    Axle Flange Identification Chart (Link)

  • Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    x
                

    Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

    Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

    916-31926 Instructions (PDF) 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Universal Power/Manual Master Cylinder, 1 Inch Bore, Corvette-Style, Chrome
    New
    Universal Power/Manual Master Cylinder, 1 Inch Bore, Corvette-Style, Chrome
    x
                

    These high-tech corvette-style master cylinders were designed using OE specifications and 100% tested.  They have a 1" bore and are suited for disc/drum combinations. Each master cylinder is ported on both the left and right sides, allowing for installation in many different applications. This exclusive design features a mating flange that works with applications requiring 3-1/8” through 3-3/8” bolt patterns.  These master cylinders will work with manual or power brake systems and can be quickly changed with the included adapter pin to plug the deep well.  The wide body and low profile gives this master cylinder the clearance you need when installing in tight areas and yet it maintains a large volume of fluid necessary for 2 and 4 wheel disc brake applications. 

    • Aluminum body
    • Chrome plated finish
    • 1" bore
    • 3/8-24 IFF ports on either side
    • Mount spacing is 3-3/8" on center
    • Works with power or manual brake systems
    • Compact, for installation under floor or on firewall
    • Suited for either disc/disc or disc/drum combinations 
    • Stroke of this master cylinder is approximately 1-1/16"

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech art

  • 1939-1948 Ford Car Brake Wheel Cylinder, Rear, 1-1/8 to 1 Inch Bore Size
    1939-1948 Ford Car Brake Wheel Cylinder, Rear, 1-1/8 to 1 Inch Bore Size
    x
                

    Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting and install corrosion resistant stainless steel sleeves with new pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.

    Features a 7/16"-24 inverted flare inlet. To adapt to an AN# 3 brake line, use fitting # 910318-7/16. To adapt to 3/16" steel brake line using a 3/8"-24 flare nut, use fitting # 9103183-7/16.

    • Corrosion resistant stainless steel sleeves
    • New pistons, cups and seals
    • Each has two OEM bore sizes
    • 7/16"-24 inverted flare inlet
    • Choose left or right side
  • Dual Feed Master Cylinder w/ Stainless Sleeve
    Dual Feed Master Cylinder w/ Stainless Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1939-48 Ford Car Wheel Cylinders, Front
    1939-48 Ford Car Wheel Cylinders, Front
    x
                

    Whether you are restoring a classic or building yourself a traditional hot rod, you need a set of our new stainless steel sleeved wheel cylinders. We start with all new casting, install corrosion resistant stainless steel sleeves with news pistons, cups and seals. Each cylinder has two bore sizes just as the originals did.

    Features a 7/16"-20 straight thread inlet. To adapt to an AN# 3 brake line, use fitting # 617-4132 along with crush washer # 617-3513. Bleeder is threaded 3/8"-24.

  • Dual 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Dual 7 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                

    Compact 7" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Currie 96227 11 x 2-1/4 Inch Drum Brake Kit w/5 x 4-1/2 and 5 x 4-3/4 BP
    New
    Currie 96227 11 x 2-1/4 Inch Drum Brake Kit w/5 x 4-1/2 and 5 x 4-3/4 BP
    x
                

    9-Plus offers these drum brake kits, compatible with new style "big" ford 9" rearends.  They are a complete 11" drum brake kit with drums that are double drilled in both 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns. This brake kit is ABCS standard which means it fits the late model large bearing (Torino) style housing end, a 2.500" brake space axle, and the drums feature a 2.800" center register hole.  Register refers to the size of the hole in the center of the brake drum.  With the axle installed in the housing, the brake space is the distance from the outside of the housing end, to the outside of the axle flange.

    • ABCS standard
    • All brand new fully-loaded assemblies
    • Double drilled for 5 on 4-1/2" and 5 on 4-3/4" wheel bolt patterns
    • For use with late model large bearing (Torino) style housings
    • Complete 11" drum brake kit
  • Chrome Power Brakes Master Cylinder
    Chrome Power Brakes Master Cylinder
    x
                

    This beautiful chrome master cylinder is highly versitile featuring outlets on both sides and a 1" bore. Has 3/8"-24 IFF outlets (includes 2 plugs for unused ports).

    For use with power brake boosters - NOT for use with manual brake systems. Suitable for use with front disc/rear drum brake systems.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    x
                

    This complete disc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindles while retaining the original 5 on 5-1/2" bolt circle.

    This kit will work with spindles having either original steering arms or with flat steel steering arms. It will NOT work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications. Will NOT work with early Ford factory wire or steel drum brake wheels. You will need to use a later disc brake steel wheel or aftermarket wheel.

    910-31909 Instructions (PDF)

  • Power/Manual Master Cylinder, 1-1/8 Inch Bore
    Power/Manual Master Cylinder, 1-1/8 Inch Bore
    x
                

    Corvette-style master cylinder has a 1-1/8" bore and is suited for disc/drum combinations. Features dual outlets so the plumbing can come out either side of the master cylinder. These master cylinders will work with manual or power brake systems. They come with a deep-well piston for manual brakes and an adapter to fill the deep well for use with a power booster.

    • 3/8"-24 IFF outlet ports
    • Plugs are included for the unused ports
    • Mount spacing is 3-3/8" on center
    • Works with power or manual brake systems

    Brake System Builder's Tip (Link)

    Note: Customers intending to use this as a manual brake pedal assembly should note that the pushrod and boot are not included.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Dual 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                

    Compact 7" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 8 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Dual 8 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                

    Compact 8" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    Single 7 Inch Brake Booster Master Cylinder Combo, 1-1/8 Inch Bore
    x
                Compact for installation under floor or on firewall of almost any vehicle. Booster measures only 7" in diameter. Cast iron master cylinder has a 1-1/8" bore and is suited for disc-disc or disc-drum combinations. 

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use). 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Dual 8 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    Dual 8 Inch Brake Booster Master Cylinder Combo, 1 Inch Bore
    x
                

    Compact 8" dual diaphragm booster assembly for installation under floor or on firewall of almost any vehicle. Cast iron master cylinder has a 1" bore and is suited for disc-disc or disc-drum combinations.

    Master cylinder features two 3/8"-24 inverted flare ports on each side (plugs are included for ports not in use).

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1958-1964 Chevy Disc Brake Kit for Drop Spindles
    1958-1964 Chevy Disc Brake Kit for Drop Spindles
    x
                

    Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets.

    Kit includes:

    • Street brake pads
    • 12" brake rotors
    • GM '69-'77 mid-size single piston iron calipers
    • Caliper slide bolts
    • Rubber brake Lines
    • Bearings & Seals
    • Spindle nut kit 

    Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when compared to the OEM drum brake track width.

  • Dual Diaphragm Stainless Booster Master Cylinder Combo
    Dual Diaphragm Stainless Booster Master Cylinder Combo
    x
                

    These show-quality brake combos come with a 7" dual diaphragm stainless steel booster and a chrome master cylinder with a 1" bore and dual 3/8"-24 IFF outlets (on both sides). Includes plugs for unused ports.

    Suitable for use with front disc/rear drum brake systems.

    Booster Tech Tip (GIF) 

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

     

  • 1955-57 Chevy Bearing & Seal Kit for 1969-72 Rotors
    1955-57 Chevy Bearing & Seal Kit for 1969-72 Rotors
    x
                

    Wheel bearing and seal kit for mounting '69-'72 GM Midsize 11" rotors to original Tri Five Chevy spindles. Use with your rotors, calipers, and brackets. Kit includes inner and outer front wheel bearings, races and seals.

    Note: Won't work with stock '55-'57 drum brakes.

  • 1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1940-1948 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31948 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1967-1969 Mustang Disc Brake Kit
    1967-1969 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1967-1969 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Works on 6-cylinder or V8 drum brake spindles
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes
    • Fits inside 14" x 7" or larger wheels

    Kit Includes:

    • 43mm 4-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • 1964-1966 Mustang Disc Brake Kit
    1964-1966 Mustang Disc Brake Kit
    x
                

    Replace those outdated and inadequate drum brakes on your vintage Ford Mustang with this complete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kit for 1964-1966 Mustang uses a 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.

    • Only works on V8 drum brake spindles. 
    • Master cylinder will not bolt to stock booster on vehicles with O.E. power drum brakes.
    • Fits inside 14" x 7" or larger wheels

    Kit includes:

    • 43mm Four-Piston Calipers
    • Vented Rotors
    • Pads
    • Mounting Brackets
    • Proportioning Valves
    • Dual Bowl Master Cylinder
    • Flex Hoses
    • Lines
    • Bearings & Seals
    • All hardware included
  • Single Diaphragm Chrome Booster Master Cylinder Combo
    Single Diaphragm Chrome Booster Master Cylinder Combo
    x
                

    These show-quality brake combos come with a 7" single diaphragm chrome plated steel booster and a chrome master cylinder with a 1" bore and dual 3/8"-24 IFF outlets (on both sides). Includes plugs for unused ports.

    Suitable for use with front disc/rear drum brake systems.

    Booster Tech Tip (GIF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1937-1939 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31939 Instructions (PDF)

  • 1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    1955-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/Drum
    x
                

    When you put modern disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • Adjustable proportioning valve for rear brake line
    • Master cylinder has outlets on both sides for ease of plumbing
    • 1/2"-20 and 9/16"-18 outlets

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1955-66 GM Master Cylinder for Drum Brakes, Stainless Sleeve
    1955-66 GM Master Cylinder for Drum Brakes, Stainless Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. This is an OEM-style single reservoir master cylinder for many 1955-1966 Chevy applications with drum brakes. Will not work with disc brakes.

    Features a 1" bore and has a 7/16"-24 inverted flare port.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1955-64 GM Master Cylinder for Drum Brakes
    1955-64 GM Master Cylinder for Drum Brakes
    x
                

    This is an OEM type single reservoir master cylinder for many 1955-1964 Chevy applications with original drum brakes. Has a 1" bore and a 7/16"-24 IFF outlet port. Not for use with disc brakes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

    Catalog Correction: This unit has a 7/16" outlet, not a 3/8" port as stated in our catalogs.

  • Electric Power Master Cylinder - Disc/Drum
    Electric Power Master Cylinder - Disc/Drum
    x
                

    These electrically boosted master cylinders are really slick. Rather than using bulky vacuum boosters to generate increased hydraulic force, they employ remote-mounted electric pumps and accumulators to build brake pressure.

    The compact and attractive aluminum master cylinder can easily be retro-fitted on the firewall of most American cars, or can be frame mounted if you have 5-1/4" of under-floor clearance.

    12 volt electric pump and accumulator assembly can be mounted out of sight on the frame or in the trunk. For disc/drum applications.

    104-10562 Instructions (PDF)

    Low pressure or return line is a 3/8" hose fitting, located on the driver's side of the master cylinder when mounted to the firewall.  

    The pumps feature 3/8"-24 IFF high pressure line from the master cylinder. A return or low pressure line is a 3/8" hose fitting. A 48" piece of return line is supplied with both kits.

    The master cylinder has slotted mounting holes with spacing that will accept a 3-1/16" to 3-7/16" on center mounting distance, and will accept both 3/8" and 10MM bolts. The reservoir is 10" long by 3" wide by 3" tall.

    The master cylinder and reservoir together measure 10" long by 3-1/4" wide by 5-1/4" tall. The pushrod h
  • 1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passenger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

    Rotor Diameter:  11"
    Caliper Piston Diameter:  2.8"
    Caliper Inlet:  7/16"-20
    Booster Type:  Single Diaphragm (Stock Type) 
    Booster Diameter:  11"
    Proportioning Valve Type:  Disc Front/Drum Rear
    Proportioning Valve Ports:  3/8"-24 Front, 9/16"-18 Rear
    Recommended Brake Line:  3/16" Steel 

  • 1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Disc Brake Booster Master Cylinder Combo
    x
                

    When you put modern front & rear disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. Why not use one of these simple bolt-on power brake systems? Kits contain a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a knob style proportioning/metering valve. Also includes the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.

    Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1935-1940 Ford Frame Mount Master Cylinder
    1935-1940 Ford Frame Mount Master Cylinder
    x
                The ideal combination for a clean and simple  1935-1940 Ford. Bracket mounts the master cylinder under the floor onto  the frame rail. The bracket can be bolted or welded to the frame (boxed  or stock). The included 1" bore master cylinder is suitable for 4-wheel  disc or disc/drum brake setups.

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort. Includes hardware.
  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • Early Ford Front Hub
    $129.99
    Product Rating: 4.50 Stars
    Early Ford Front Hub
    x
                

    Our new front early Ford car hubs are of the 1940 design which was of the slip-over drum configuration (brake drum mounts to the "front" side of the hub). Studs are installed on a 5 on 5-1/2" bolt circle. Hubs have bearing races installed and include a dust cap.

    Note: This hub does NOT include bearings and seals (sold separately in kit 910-65455).

  • 1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for front disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all front disc brake conversions.

    • 8" dual diaphragm booster
    • 1" bore master cylinder
    • GM style proportioning/metering combination valve
    • Master cylinder has outlets on both sides for ease of plumbing
    • Includes plugs for unused outlets on opposite side of master cylinder

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • 1955-57 Chevy Car Brake Booster Combo, Disc/Drum
    1955-57 Chevy Car Brake Booster Combo, Disc/Drum
    x
                

    When you put modern disc brakes on the front of your 1955-57 Chevy car you should update the master cylinder as well. The stock 4-wheel drum master does not have the capacity to supply the proper amount of pressure for front disc brakes, so for best results, we recommend using this combo kit with any front disc brake conversion kit.

    • Bolt-on assembly works with stock pedal
    • Uses common 1" bore master cylinder
    • 8" dual diaphragm booster
    • Angled booster-to-firewall mounting bracket gives additional valve cover clearance

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

Goto Previous PagePrevious Page
1 2 3