Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"drag racing race car front shocks" Page 1 of 1

  • AFCO 30022 1979-2004 Mustang Street/Strip Front Strut
    AFCO 30022 1979-2004 Mustang Street/Strip Front Strut
    x
                

    AFCO Mustang Street/Strip coil-over struts incorporate race inspired valving for hard launches, consistent E.T.'s and improved reaction times. The struts completely replace stock units and can be used in the O.E. configuration. The optional coil-over kit & caster/camber plates will allow for ride height adjustment using a coil-over spring.

    • Fixed valving promotes maximum weight transfer
    • BNC valving provides soft rebound dampening while controlling front end "bounce"
    • Coil-over conversion allows ride height adjustment
    • Caster/Camber plates are recommended when lowering the ride height
    • Complete kit allows for correct geometry at any ride height

    Strut package is the perfect complement to AFCO Tubular K-Members and Reactor Series or Eliminator rear shocks.

    Note: AFCO recommends a 10" 200 lb. spring for drag racing, or a 14" 125 lb. spring for other uses.

  • AFCO 3875F Eliminator 1993-02 Camaro Front Shocks - Single Adj
    AFCO 3875F Eliminator 1993-02 Camaro Front Shocks - Single Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    Fits 1993-2002 GM F-Body (Chevy Camaro, Pontiac Firebird). Coil-over kit hardware is included.

  • AFCO 3870F Eliminator 1993-02 Camaro Front Shocks - Double Adj
    AFCO 3870F Eliminator 1993-02 Camaro Front Shocks - Double Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    Fits 1993-2002 GM F-Body (Chevy Camaro, Pontiac Firebird). Coil-over kit hardware is included.

  • AFCO 3850F Eliminator 1962-67 Chevy II Front Shocks, Double Adj
    AFCO 3850F Eliminator 1962-67 Chevy II Front Shocks, Double Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability. 

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Fits 1962-1967 Chevy II/Nova (may need to "slot" tie bar mount). 

  • AFCO 3865M Mopar Eliminator Single Adjustable Front Shock, 6 In Stroke
    AFCO 3865M Mopar Eliminator Single Adjustable Front Shock, 6 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 3855M Mopar Eliminator Single Adjustable Front Shock, 5 In Stroke
    AFCO 3855M Mopar Eliminator Single Adjustable Front Shock, 5 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 3845F Eliminator Front Shocks, Single Adj - Chevy/GM/Dodge Truck
    AFCO 3845F Eliminator Front Shocks, Single Adj - Chevy/GM/Dodge Truck
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • Lightweight aluminum construction easily dissipates heat 
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Fits most '55-'96 GM chassis

    Fits most '79-92 Dodge Trucks 

    See Application tab for fittment.

     

  • AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D
    Fits 1979-1992 Dodge Ram half-ton pickup trucks

    Fits most '55-'96 GM chassis

    See Application tab for fittment.

  • AFCO 3860M Mopar Eliminator Double Adjustable Front Shock, 6 In Stroke
    AFCO 3860M Mopar Eliminator Double Adjustable Front Shock, 6 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.  By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability. 

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 3850M Mopar Eliminator Double Adjustable Front Shock, 5 In Stroke
    AFCO 3850M Mopar Eliminator Double Adjustable Front Shock, 5 In Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.  By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability. 

    • Body Mount:  1/2" I.D. Bearing (1.06" wide)
    • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted knob with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for Dodge-Plymouth chassis fittment.

  • AFCO 3875R-1 Eliminator Rear Shock-7 Inch, Bearing Shaft, Chevrolet/GM
    AFCO 3875R-1 Eliminator Rear Shock-7 Inch, Bearing Shaft, Chevrolet/GM
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • 106-3875R1
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  1/2" I.D. bearing (1.06")

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 3875R-2 Eliminator Adj Rear Shock-7 Inch-Shaft Stud, Chevrolet/GM
    AFCO 3875R-2 Eliminator Adj Rear Shock-7 Inch-Shaft Stud, Chevrolet/GM
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    Single (Rebound) Adjustable shocks are an economical alternative that gives you the ability to adjust rebound dampening control without affecting the compression dampening characteristics of the shock.

    • 106-3875R2
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 3870R-1 Eliminator Double Adjustable Rear Shock, 7 Inch, Chevy/GM
    AFCO 3870R-1 Eliminator Double Adjustable Rear Shock, 7 Inch, Chevy/GM
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • 106-3875R1
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  1/2" I.D. bearing (1.06")

    Fits most '55-'96 GM chassis - see Applications tab for fittment.

  • AFCO 3870R-2 Eliminator Adj. Rear Shock 7 In, Chevy/GM, 1970-81 Camaro
    AFCO 3870R-2 Eliminator Adj. Rear Shock 7 In, Chevy/GM, 1970-81 Camaro
    x
                

    AFCO Eliminator Twin Tube Adjustable REAR shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • 106-3875R2
      • Body Mount:  Tie Bar with 2.375" bolt centers
      • Shaft Mount:  9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    See Applications tab for fittment.

  • Steve Smith Autosports C249 CD-ROM - Front Suspension Geometry Pro
    Steve Smith Autosports C249 CD-ROM - Front Suspension Geometry Pro
    x
                

    Combines photo-like graphics with the power of high-speed computer intelligence to give you clear and fast improvements to your front suspension. Analyzes and helps you to correct camber curve, side scrub, bump steer, caster curve and fore/aft suspension curve. The built-in analysis identifies problems for you then suggests specific items to improve your suspension geometry. Also includes static analysis of scrub radius, caster trail and roll center height and offset. Includes complete instructional book. 

    Designed for dirt oval, paved oval and road race cars. CD-ROM for Windows computers.

  • DVD - Bob Harris Race Tech Workshops Stock Car Tune To Win Set
    DVD - Bob Harris Race Tech Workshops Stock Car Tune To Win Set
    x
                

    Bob Harris has more than 25 years of racing and chassis design experience and is highly sought after for chassis set-up advice. His guidance and instruction are now available for all racers in these great Race Tech DVDs packed with powerful knowledge to help you reach victory.

    Designed specifically for stock car and hobby stock classes and contains more than eight hours of seminar and hands-on footage on four DVD's.

    Topics include weekly maintenance, scaling and set-up procedures, front end alignment, bumpsteer, roll centers, ride heights, OEM four-link rear suspensions, springs, shocks and tuning at the track. It also includes a workshop manual.

  • DVD - Bob Harris Race Tech Workshops Race To Win Set
    DVD - Bob Harris Race Tech Workshops Race To Win Set
    x
                

    Bob Harris has more than 25 years of racing and chassis design experience and is highly sought after for chassis set-up advice. His guidance and instruction are now available for all racers in these great Race Tech DVDs packed with powerful knowledge to help you reach victory.

    Features eight hours of winning information on four DVD's. Filmed live at a Harris workshop, it covers topics like front suspension, camber and caster, bumpsteer, two- and four-link rear suspensions, panhard bars, torque links, springs, shocks, tire management and basic chassis set-up.

    The package includes a workshop manual that makes it easy to take notes and keep information handy in the shop or at the track.

  • Low Friction Oil Bath 10 Inch Hybrid Brake Rotor Kit
    Low Friction Oil Bath 10 Inch Hybrid Brake Rotor Kit
    x
                

    Reduce drag on your race car with this innovative kit from Speedway. The Oil Bath Brake Rotor uses straight 30wt oil to lubricate the wheel bearings instead of grease, which significantly reduces friction. Oil can be easily changed using the supplied tapped plug.

    You get (1) oil bath 10" hybrid rotor with races installed, 5/8" course thread quick-start studs, and (1) special O-ring dust cap (each rotor sold individually). Pre-drilled holes include 5 on 4-3/4" and 5 on 5" bolt circle spacing. 

    • Less Friction
    • Less Heat
    • Less Maintenance
    • Less Mess

    NOT DESIGNED FOR ASPHALT RACING.

  • Garage Sale - AFCO 3870F Eliminator 1993-02 Camaro Front Shocks - Double Adj
    Garage Sale
    Garage Sale - AFCO 3870F Eliminator 1993-02 Camaro Front Shocks - Double Adj
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready

    Fits 1993-2002 GM F-Body (Chevy Ca

  • Garage Sale - AFCO Eliminator Front Shock, Single Adj - Chevrolet/GM
    Garage Sale
    Garage Sale - AFCO Eliminator Front Shock, Single Adj - Chevrolet/GM
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    Garage Sale
    Garage Sale - AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 3840F Eliminator Front Shock, Double Adjustable, Chevy/GM, Dodge
    Garage Sale
    Garage Sale - AFCO 3840F Eliminator Front Shock, Double Adjustable, Chevy/GM, Dodge
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    Garage Sale
    Garage Sale - AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    x
                Please view the product's page for more information
            
  • Garage Sale - AFCO Eliminator Front Shock, Double Adjustable - 4 Inch Stroke
    Garage Sale
    Garage Sale - AFCO Eliminator Front Shock, Double Adjustable - 4 Inch Stroke
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Fits most '55-'96