Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"drag link arm" Page 1 of 5

  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                

    These tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. 

  • Chrome Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Chrome Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Plain Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                Please view the product's page for more information
            
  • Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends
    x
                Please view the product's page for more information
            
  • 1968-1972 GM Midsize Pitman Arm
    1968-1972 GM Midsize Pitman Arm
    x
                Brand new 1968-1972 GM midsize pitman arms

    Fits the following "4-bolt top" applications:
    • Sweet and 800 Series GM box
    • Big Spline" GM power 700 series Saginaw box
    • Big Spline" GM power 600 series Delphi box
    Fits drag links from:
    • 1968-72 Chevy Chevelle, El Camino, Malibu, & Monte Carlo
    • 1968-72 Buick Century, Luxus, Regal, Skylark, & Special (rwd)
    • 1966-72 Oldsmobile Cutlass, F85, Vista Cruiser, 4-4-2, & Calais (rwd)
    • 1964-72 Pontiac GTO, Lemans, Grand Am, Grand Lemans, Tempest, & T37
  • Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
    x
                

    These unpolished stainless steel tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Specify desired length in comments section of shopping cart. No returns/exchange on custom length links.Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.

    Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".

    Measuring Tie Rod or Drag Links (GIF) 

    Flat Steering Arm Illustration (GIF)

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die o

  • Speedway Corvair Pitman Arm
    From: $49.99
    Product Rating: 4.50 Stars
    Speedway Corvair Pitman Arm
    x
                

    This is our forged 'new design' Corvair pitman arm. It measures approximately 7" end to end, approximately 5-3/8" from the center of the big hole to the center of the small hole. The arm has a side-to-side offset approximately 1-7/8". The small hole fits an early Ford tie rod end (such as our 910-02909) and it is half tapered from both sides so that the drag link can be mounted from either side.


     

     

  • Chrome Tie Rod/Drag Link Kit with Stainless 11/16 Inch Tie Rod Ends
    Chrome Tie Rod/Drag Link Kit with Stainless 11/16 Inch Tie Rod Ends
    x
                Please view the product's page for more information
            
  • Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
    Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
    x
                Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.) 
    • Not for use with flat steering arms
    • Use only with Ford type steering arms with a tapered hole
    • Not normally used with Chevy spindles

    Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

  • Chrome Cross Steering Tie Rod End, 11/16-18 LH Threads
    Chrome Cross Steering Tie Rod End, 11/16-18 LH Threads
    x
                

    Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.)

    • Not for use with flat steering arms
    • Use only with Ford type steering arms with a tapered hole
    • Not normally used with Chevy spindles

    Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

  • Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    x
                Please view the product's page for more information
            
  • Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends, Custom Length
    x
                

     

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Specify desired length in comments section of shopping cart. No returns/exchange on custom length links. Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • Ford Upper Steering Arm, Plain, 6-1/4 Inch, Tapered
    Ford Upper Steering Arm, Plain, 6-1/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    x
                

     

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. 

     

  • Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available in a custom length. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

  • Chrome Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    Chrome Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
    x
                

    These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

    Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

    Measuring Tie Rod or Drag Links (GIF)

    Tapered Steering Arm Illustration (GIF) 

    Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

     

  • Chevy Flat Upper Steering Arm, Plain
    Chevy Flat Upper Steering Arm, Plain
    x
                Perfect for that traditional steering car. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Plain, 7-3/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Plain, 7-3/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). These longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Plain, 7-3/4 Inch, Tapered
    Ford Upper Steering Arm, Plain, 7-3/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Chrome, 6-1/4 Inch, Tapered
    Ford Upper Steering Arm, Chrome, 6-1/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapped 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Chrome, 7-3/4 Inch, Tapered
    Ford Upper Steering Arm, Chrome, 7-3/4 Inch, Tapered
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. Tapered end accepts 11/16" tie rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Chrome, 6-1/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Chrome, 6-1/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Ford Upper Steering Arm, Plain, 6-1/4 Inch, 5/8 Hole
    Ford Upper Steering Arm, Plain, 6-1/4 Inch, 5/8 Hole
    x
                Flame cut steel upper steering arm for '37-'48 Ford spindles (with 3-3/8" mount centers). This design is available in 6-1/4" or 7-3/4" lengths. The longer 7-3/4" arms permit a tighter left turn when using large diameter front tires or front wheels with a deep reverse, and it also slows the steering rate for greater control. 5/8" end accepts spherical rod ends. 

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Chevy Flat Upper Steering Arm, Chrome
    Chevy Flat Upper Steering Arm, Chrome
    x
                Perfect for that traditional steering car. 6-1/2" long and drilled for a 5/8" rod end. Center to center measurement of the mounting holes is 3.125".  These have .475" mounting holes.

    NOTE: Upper steering arms allow the attachment of a drag link to the LH (driver's side) spindle. The arms attach with bolts through the upper 2 backing-plate-mounting holes on spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • 1965-1967 Chevrolet A-Body Center Link
    1965-1967 Chevrolet A-Body Center Link
    x
                

    We stock these hard-to-find 1965-1967 Chevrolet A-Body center link includes (2) castle nuts, (2) gease fittings, and (2) cotter pins.

    • Fits 1965-1967 Chevelle (Will work with '64 with use of 65'-67 pitman and idler arms)
    • 14.5” eye-to-eye (uses 7/8" idler arm)
    • 23.5" pin-to-pin
    • 1/2"-20 Threads
    • 1/2" Tapered Holes
    • Uses 7/8" Idler arm
    • O.D. is .922 or 15/16” - this is slightly bigger than the normally offered 13/16” or 7/8”
  • 1928-32 Ford Cross-Steer Rack and Pinion
    1928-32 Ford Cross-Steer Rack and Pinion
    x
                Please view the product's page for more information
            
  • Jet Modified Front Suspension
    $1,199.99
    Jet Modified Front Suspension
    x
                Please view the product's page for more information
            
  • 1953-60 Ford F1 Pickup Dropped Axle
    1953-60 Ford F1 Pickup Dropped Axle
    x
                

    Our dropped axles for your classic Ford F1 pickup will get the front end down where you want it. The center portion of the axle is made of 2" DOM tubing while the ends are CNC milled from solid steel. These axles give you 2" of drop on the '57-'60 chassis. Tie rod drops required, U-bolts sold separately.

    If using this axle in conjunction with drop springs, you may encounter bump steer or tie rod issues.

    • This provides 3"drop compared to the stock 53-56 axle, it provides
      2"drop compared to the 57-60 axle.
    • Dropped tie-rod ends 910 48640 may be required to provide tie-rod to spring
      clearance.
    • If you are also using dropped springs, they may need to modify the
      drag link / pitman arm to avoid bump steer.
    • Kingpin center to center = 53 3/4"
    • Spring pad center to center = 32 3/4"
    • Axle will provide a camber reading of -1.6 degrees
  • Ford Flat Tie Rod Steering Arms, Plain
    Ford Flat Tie Rod Steering Arms, Plain
    x
                

    Fits 1937-48 Ford style spindles. The arms attach with bolts through the lower 2 backing-plate-mounting holes on spindle. Ford arms use a 48" eye to eye tie rod link when used with a 48" wide axle / Ford spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • Tru-Lite Titanium Complete Bolt Kit, Maxim Chassis, One Nut RR/DL
    Tru-Lite Titanium Complete Bolt Kit, Maxim Chassis, One Nut RR/DL
    x
                

    Save up to 30% by buying complete Tru-Lite bolt kits! Includes one nut style radius rods and drag links. Available in one-nut shock mount style or quick release shock mount style. Kits include 138 titanium bolts, aluminum and steel nylocks and washers.

    Case not included.

  • Vega Pitman Arm - Tapered for Tie Rod
    From: $49.99
    Product Rating: 5.00 Stars
    Vega Pitman Arm - Tapered for Tie Rod
    x
                These all new reproduction pitman arms feature a non-offset design, a double tapered "Ford" tie rod end hole (lets you attach the drag link on the top or on the bottom), and comes in gleaming stainless steel or plain steel. Perfect for a repro Vega steering box. 
            
  • Lo-Boy Cross Steering Kit
    $499.99
    Lo-Boy Cross Steering Kit
    x
                

    This kit equips your '32 Lo-Boy with a cross steering system featuring a new Flaming River Vega steering box.  

    • Lower steering arms (flat plate, plain finish)
    • New Vega steering box
    • Pitman arm, modified
    • U-joint, splined for Vega shaft
    • Tie rod
    • Drag link
    • Spherical rod ends
    • All mounting hardware and spacers included 
  • 1960-62 Chevy Center/Drag Link, Manual Steering
    1960-62 Chevy Center/Drag Link, Manual Steering
    x
                

    We stock these hard to find components. This makes it a snap to switch from the original power assist steering to manual steering. Just remove the original power steering control valve and replace it with the centerlink. Works great when converting a power steering box. Works with the factory pitman arm.

    • Switch from the original power assist steering to manual steering
    • Works great when converting a power steering box
    • Works with the factory pitman arm
    • 1960-62 Chevy
  • 1978-88 A/G Body Metric Idler Arm
    1978-88 A/G Body Metric Idler Arm
    x
                We stock those hard-to-find 1978-81 A-Body and 1978-88 G-Body idler arms. This idler arms measures 6.25" from center of pivot point to center of tie-rod attachment hole.
            
  • Ford Flat Tie Rod Steering Arms, Chrome
    Ford Flat Tie Rod Steering Arms, Chrome
    x
                

    Fits 1937-48 Ford style spindles. The arms attach with bolts through the lower 2 backing-plate-mounting holes on spindle. Ford arms use a 48" eye to eye tie rod link when used with a 48" wide axle / Ford spindle.

    Steering Arm Ends Guide (GIF)

    Parallel Steering Set-Up Guide (GIF)

  • 1964-67 Chevelle 7/8 Idler Arm
    1964-67 Chevelle 7/8 Idler Arm
    x
                
    • '64-'67 Chevelle idler arm
    • For use with 7/8" diameter center link stub
    • Check your application before ordering
  • Speedway Mini Sprint Pitman Arm
    Speedway Mini Sprint Pitman Arm
    x
                
    • 2 drag link holes,
    • 11" centerline to centerline (from steering gear hole to drag link hole) and 12" centerline to centerline
    • Includes pockets for less weight
    • Machined from 1" bar stock
    • Two-tone black anodize finish
    • Includes pinch bolt
Goto Previous PagePrevious Page
1 2 3 4 5