Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"disc brake caliper brackets" Page 1 of 8

  • GM Metric Disc Brake to 9 Inch Ford Bracket Set
    GM Metric Disc Brake to 9 Inch Ford Bracket Set
    x
                Allows you to bolt '78 an Up GM Metric disc brakes on Ford 9" rearend.  Hardware sold separately.

    Includes:
    • 2 Caliper brackets
    • 2 Adapter plates
    • 2 Spacer plates
    • 8 5/16" spacers
    • 8 1/8" spacers

    Note:  This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts.  If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so.  Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit
    Ford 9 Inch Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31902 Instructions (PDF)

  • Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM emergency brake calipers, brake pads and hardware.

    • Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • For Ford passenger car axles ONLY 
    • Fits axle with maximum flange diameter of 6-1/4" O.D.
    • For 15" and larger wheel applications ONLY

    NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8" retaining bolts. If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8" hardware to do so. Fits "old" and "new" style big bearing (3.150" bearing O.D.) Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2".

    Axle Flange Identification Chart (GIF)

    910-31921 Instructions (PDF)

  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 1.96 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (1.96" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31910 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, aluminum brake hats (1.59" backspace), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31915 Instructions (PDF)

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '78-'88 GM metric car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31925 Instructions (PDF)

  • Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    Basic Weld-On Rear Disc Brake Kit for 1969-77 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Included steel caliper brackets weld to your 3" tube rearend, making this a universal kit for a variety of applications. Basic kit includes caliper brackets for '69-'77 GM mid-size car front calipers, Pro-lite vented .810" x 11-3/4" iron rotors, steel brake hats (3" backspace, 6-1/4" I.D.), and rotor bolts.

    Hat fits 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circles.

    910-31920 Instructions (PDF)

  • Basic Disc Brake Kit, 1969-77 GM Caliper to Ford Spindle, 5 on 4-3/4
    Basic Disc Brake Kit, 1969-77 GM Caliper to Ford Spindle, 5 on 4-3/4
    x
                This basic front disc brake conversion kit allows you to mount 1969-72 GM mid-size rotors (5 on 4-3/4" wheel bolt pattern) and 1969-77 GM mid-size calipers on your 1937-48 Ford passenger car style spindles. No machine work needed. Bracket is zinc plated.   

    Kit Includes:

    • 1969-1972 GM to Ford brake brackets
    • Hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts

    916-31903 Instructions (PDF)

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Garage Sale - Quick Change Caliper Bracket
    New
    Garage Sale - Quick Change Caliper Bracket
    x
                

    Plain steel disc brake caliper bracket. Mounting holes are for 9/16" hardware and have a center ro center of 2-3/8".  

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Mustang II Brake Caliper C-Bracket
    Mustang II Brake Caliper C-Bracket
    x
                Individual brake caliper c-brackets available. Choose right or left.
            
  • Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily install 11" rotors and 1978-88 GM Metric calipers to your 1937-48 Ford passenger car style spindles with no machine work needed. This disc brake kit is great for street rods based on 1932-1948 Fords. For lightweight cars like T-buckets or early roadsters, we recommend the Wilwood kits. This front disc brake conversion kit works well with bolt-on steering arms. The 11" diameter rotors have the GM wheel bolt pattern of 5 x 4-3/4". Calipers have 7/16"-20 inlets.

    910-31946 Instructions (PDF)

  • Speedway Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    Speedway Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                Use with Pinto spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper. Available for left or right side. 
            
  • AFCO 40121C 3 Inch Tube Clamp-On Caliper Bracket, Small GM
    AFCO 40121C 3 Inch Tube Clamp-On Caliper Bracket, Small GM
    x
                

    AFCO clamp-on rear disc brake caliper bracket for 3 inch diameter axle tube. For smaller GM metric calipers. Stop-bolt recommended and included with bracket

    106-40121C Instructions (PDF) 

  • Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    Basic Disc Brake Kit, 1937-48 Ford Spindle to F-150 Rotors, 5 on 5-1/2 Inch
    x
                

    This basic front disc brake conversion kit easily installs big '73-'93 Ford F-150 2WD 11-3/4" rotors on your '37-'48 Ford car and '37-'47 Ford half-ton pickup truck spindles while retaining the original 5 on 5-1/2" wheel bolt circle. The calipers used with this kit are '71-'76 Chevy Impala single-pistion units.

    Kit includes:

    • Caliper brackets
    • Hardware
    • New bearing and seal adapters

    Note: This kit will work with spindles having either original steering arms or with flat steel steering arms. It will not work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications.

    Early Ford Brake Kit Installation Instructions (PDF)

  • Basic Disc Brake Kit, 1969-77 GM Caliper, Stock Ford Spindle, 5on4-3/4
    Basic Disc Brake Kit, 1969-77 GM Caliper, Stock Ford Spindle, 5on4-3/4
    x
                

    This basic front disc brake conversion kit allows you to easily install '73-'77 GM mid-size 11" rotors (5 on 4-3/4") and '69-'77 mid-size GM single piston calipers onto your '37-'48 Ford passenger car style spindles. No machine work needed.

    Kit includes:

    • 1973-77 GM brake brackets
    • 1973-77 hardware
    • Bearing and seal adapters
    • Seals
    • Inner bearing cups
    • Inner bearing cones
    • Spacers
    • Instructions
    • Does not include dust caps, washers or spindle nuts
    Note: Not for use with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or early roadster.

    916-31901 Instructions (PDf)

  • Basic Disc Brake Kit 1947-1959 Chevy Half Ton Pickup
    Basic Disc Brake Kit 1947-1959 Chevy Half Ton Pickup
    x
                

    Convert your straight axle truck to disc brakes with our bolt-on disc brake bracket kit. Kit is a true bolt-on using the factory holes on the 1/2 ton spindle. Kit includes caliper brackets, bearing adapters and mounting hardware.

    • Increases track width 7/16" per side, 7/8" total
    • Works with 15" or larger wheels
    • Works with 5 on 4-3/4 Inch bolt patterns

    Chevy Half Ton Pickup Brake Kit Installation Instructions (PDF)

  • Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    Basic Disc Brake Kit, 1955-64 Chevy Fullsize Car, Stock Spindle
    x
                

    This kit allows you to put front disc brakes on your 1955-64 fullsize Chevy passenger car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series) OEM spindles (will NOT work with dropped spindles). It will work with 14" wheels intended for disc brakes, as well as most 15" (or larger) wheels. Works with 5 on 4-3/4 inch bolt patterns.

    Use with our 11" rotor 910-65390 and metric caliper 910-31045 (see Notes). This kit will increase track width 3/8" per side or or 1-3/4" total when installed.

    Kit Includes:

    • Brake brackets
    • Hardware
    916-31931 Instructions (PDF)
  • AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PL Front Left 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • AFCO 40122PR Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    AFCO 40122PR Right Front 10 Inch Hybrid Brake Rotor Caliper Bracket
    x
                

    Use with 1974-1980 Pinto/Mustang II spindle, 10" hybrid rotor and GM 1978-up "Metric" caliper.

    Sides are reversed on '73 & older spindles.

  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • 11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    11 Inch Mustang II Rotor with GM 4.75 Inch Bolt Circle, Metric Caliper
    x
                This rotor allows the use of GM Metric calipers along with a GM car bolt pattern. Vented stock 11" diameter brake rotors for 1974-1980  Mustang  II, Pinto, or Bobcat spindles (or popular GM Metric calipers and brackets). Brake rotors are new, not plugged or re-drilled. Has a   5 on 4-3/4" bolt pattern with corresponding 7/16" diameter fine thread   wheel studs.
    • 5 on 4.75" Bolt circle
    • Granada type rotor
    • For use with popular GM Metric calipers and brackets
    • Bearing and seal kit sold separately (910-31052)
  • 1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 5-1/2 Inch
    x
                

    These kits allow you to put disc brakes on your 1948-56 Ford 1/2 ton pick-ups. No spindle modifications are required.

    Kit Includes:

    • Vented cast iron rotors
    • GM single piston calipers (7/16"-20 inlets)
    • Brake pads
    • Caliper slide bolts
    • Rubber brake lines
    • Steel caliper brackets
    • Hardware
    • New bearing and seal adapters
    • Seals
    • Inner bearing cones
    • Outer bearing cones
    • Spacers
    • Dust caps
  • Weld-On 1978-88 GM Flat Mount Caliper Bracket
    Weld-On 1978-88 GM Flat Mount Caliper Bracket
    x
                

    These caliper brackets mount flat and must be welded onto your 3" diameter axle tube. Designed to mount a 1978-1988 GM metric car front caliper for use with an 11.75" diameter rotor. Brackets are 1/4" thick.

    IMCA APPROVED

  • 1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    x
                

    This kit allows you to upgrade your 1963-70 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you wanted custom 5-lug wheels on your truck anyways, right?

    The kit will make use of 1969-72 Chevelle rotors & 1969-77 Camaro calipers.

    Use Speedway Outer Wheel Bearing #912TLM11949 (not included).

  • Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Basic Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    This basic front disc brake conversion kit allows you to bolt on modern disc brakes to your '37-'48 Ford passenger car style spindles. Kit comes with the caliper bracket, inner bearing and seal, and required hardware. Outer bearing 912-TLM11949 is not supplied with this kit.

    Not for use with bolt-on steering arms.

    Kit works with '76-'80 Dodge Aspen 11" rotors (5 on 4-1/2" wheel bolt pattern) and '69-'77 GM mid-size calipers.

    916-31921 Instructions (PDF)

  • Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    Disc Brake Kit, 1969-77 GM Caliper to Early Ford Spindle, 5 on 4-3/4 Inch
    x
                

    Easily installs 11" rotors and the 1969-77 GM midsize calipers to your 1937-48 Ford passenger car spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Chevy bolt pattern 5 on 4-3/4".

    910-31942 Instructions (PDF)

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM emergency brake style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31924 Instructions (PDF)

  • Ultra Lite Brakes 935-6258 Featherweight Inboard Caliper Bracket
    Ultra Lite Brakes 935-6258 Featherweight Inboard Caliper Bracket
    x
                
    Ultra Lite Brakes  featherweight inboard caliper mount bracket for the 200 Series 4-piston brake caliper.
  • 1962-74 Mopar B/E-Body Front Disc Brake Kit
    1962-74 Mopar B/E-Body Front Disc Brake Kit
    x
                

    This is the brake kit you Mopar guys have been waiting for. This complete disc brake kit is for 1962-1972 B-body and 1970-1974 E-body cars and includes rotors, spindles, calipers, brackets, pads, bearings, seals, dust caps, hoses and hardware for both front wheels. No machine work, bolts together. 11" outside diameter rotors. 5 on 4-1/2" bolt pattern. Calipers have 7/16"-20 inlet.

    910-31962 Instructions (PDF)

    Learn more about our B-body disc brake conversion kit featured in Street Legal TV's '69 Charger project tech article, Killer Kong Project Update: Speedway Motor's Speedy Disc Brake Swap.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the left front wheel.

  • Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    Speedway Granada 10-1/2 Inch Brake Caliper Bracket, RH
    x
                

    These brackets are used to mount a GM "metric" calipers to 1974-1980 Pinto/Mustang II spindles for use with what is basically a "Granada" 10-1/2" brake rotor. Steel, bolt-on design mounts the caliper on the rear side of the right front wheel.

  • Speedway Basic Brake Kit for 1955-57 Chevy Car
    Speedway Basic Brake Kit for 1955-57 Chevy Car
    x
                Just what's needed to update your classic Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once. This kit will increase the total track width by 1-3/4". May not clear some 14" wheels. Uses 1969-72 GM Midsize calipers and rotors. Bolts on with no machine work necessary.  

    Kit Includes:

    • Brake caliper brackets
    • Hardware
    916-31915 Instructions (PDF)
  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31919 Instructions (PDF)

  • Wire Wheel Brake Kit For Ford Spindle
    Wire Wheel Brake Kit For Ford Spindle
    x
                

    Our lightweight T-bucket disc brake kit for wire wheels includes 360 degree caliper brackets, steel rotors, Wilwood aluminum single piston, floating calipers and hardware. Works with '37-'48 style Ford passenger car spindles.

    Note: Wire wheel and spindle are shown in photo for reference only and are NOT included in the brake kit.

    • Caliper uses the .49” thick, 1.1 cubic inch Dynalite Single quick change pads
    • Multiple 1/8"-27 NPT inlet and bleed screw locations
    • Black anodized to resist corrosion 

     

  • AFCO 40121PL Granada 10-1/2 Inch Brake Caliper Bracket, LH
    AFCO 40121PL Granada 10-1/2 Inch Brake Caliper Bracket, LH
    x
                

    These brackets are used to mount GM "Metric" calipers to Pinto/Mustang II spindles for use with what is basically a 1975-1981 "Granada" 10-1/2" brake rotor.

    Available in LH or RH. Sides are reversed on 1973 & older spindles.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 8