Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"demon carb air cleaner" Page 1 of 1

  • Technostalgia 8500 Retro Cadillac/Oldsmobile Air Cleaner
    Technostalgia 8500 Retro Cadillac/Oldsmobile Air Cleaner
    x
                

    This all steel air cleaner is based off the 1951-1956 Olds & Caddy air cleaner. It uses an over-the-counter 14" x 4" replacement element. It's even notched out in the back to clear a GM HEI distributor. Fits 5-1/8" carb neck (most Holley, Quadrajet, Demon and Edelbrock carbs).

    • 4-5/8" carb to top of air cleaner assembly
    • 5-3/32" carb to top of air cleaner nut
    • 18-1/4" wide (not a scaled down version)
    • 17-19/32" front to back length
    • Notched at rear for HEI distributor clearance

    Includes all steel housing, steel top, paper filter element, carburetor stud, and unique rocket shaped wing nut.

  • Chrome Deep Dish Performance Air Cleaner, 14 x 2 Inch, 4 Barrel Carb.
    Chrome Deep Dish Performance Air Cleaner, 14 x 2 Inch, 4 Barrel Carb.
    x
                

    Keep the air entering your engine clean with our chrome plated steel air cleaners.  This chrome plated steel 4 barrel (5-1/8" neck) air cleaner has a 14" diameter and 2" tall paper filter element. There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb.  This easy to install air cleaner comes with mounting hardware and PVC smog fitting.

    Chrome Deep Dish Performance Air Cleaner

    • Chrome plated steel
    • 14" diameter and 2" tall filter element
    • Fits 4 barrel carbs with 5-1/8" neck
    • Includes stud and wing nut
    • Triple process plating for brightest finish and long life
    • Non-restricting, flame proof filter
    • Performance designed for increased breathing
    • Designed for universal applications
    • Fits: cars, trucks, minis, 4x4s, street rods, and RV's

     

  • Street Demon 1905 750 CFM Hand-Polished Aluminum Carburetor
    Street Demon 1905 750 CFM Hand-Polished Aluminum Carburetor
    x
                Please view the product's page for more information
            
  • Professional Products 20004 Airflo Insert, Demon Carb w/ Choke
    Professional Products 20004 Airflo Insert, Demon Carb w/ Choke
    x
                The air coming into the air cleaner is pulled from each direction and tends to crash into itself when it meets above the carb, which causes turbulence. This insert slides over the air cleaner stud and directs the air down into the carb, eliminating that turbulence. For Demon 4 bbl carbs only. Easy 5 minute installation!

    Dyno shows a 7-10 horsepower gain!

    See How It Works (Link)

  • Street Demon 1901 625 CFM 4 Barrel Carburetor, Polymer Main Body
    Street Demon 1901 625 CFM 4 Barrel Carburetor, Polymer Main Body
    x
                Please view the product's page for more information
            
  • Professional Products 20001 Airflo Insert, Holley/Demon w/o Choke
    Professional Products 20001 Airflo Insert, Holley/Demon w/o Choke
    x
                The air coming into the air cleaner is pulled from each direction and tends to crash into itself when it meets above the carb, which causes turbulence. This insert slides over the air cleaner stud and directs the air down into the carb, eliminating that turbulence. For Holley and Demon 4 bbl carbs without a choke horn. Easy 5 minute installation!

    Dyno shows a 7-10 horsepower gain!

    See How It Works (Link)

  • 12 Inch Oval Chrome Air Cleaner
    12 Inch Oval Chrome Air Cleaner
    x
                

    Just the ticket to top off your chromed out engine. Fits 5-1/8" carb necks which includes most 4 barrel Holley, Edelbrock, Demon, Q-jet and or Ford carbs (also fits Holley & Ford 2-bbl carbs with 5-1/8"neck).

    Measures 12" long x 8" wide x 3-1/8" high with a 2" tall element. Includes carb stud and wing nut.

  • Helmet Style Air Cleaners
    $18.99
    Helmet Style Air Cleaners
    x
                

    Just the ticket for that tri-power setup! Chrome plated steel housing with 4" x 2" replaceable paper element. Fits Holley 94, Stromberg 97, Speedway 9 Super 7, Demon 98, and Rochester carbs with 2-5/8" neck size.

  • Lokar SRK-4000 Carburetor Bracket and Return Spring
    Lokar SRK-4000 Carburetor Bracket and Return Spring
    x
                

    Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

    Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includes allen wrench to adjust the set screw.

  • Garage Sale - Barry Grant Demon 98 Retro Carb-Secondary
    Garage Sale
    Garage Sale - Barry Grant Demon 98 Retro Carb-Secondary
    x
                Barry Grant's Demon 98 carburetors were designed to replace Stromberg, Ford or Holley 3-bolt base carbs and their variations. By using modern technology and components, they were able to give you a far superior product than previously available.

    The Demon 98 also shares jets, bowl gaskets, needle & seat and other parts used on the Demon 4bbl carbs. They flow 205 cfm each and operate at 6-7 lbs. of fuel pressure and use common 2-5/8" air cleaners. 

    This carburetor operates as a secondary carburetor and should be used with one or more Demon 98 primary carburetors. This secondary carb does not have a choke or idle-mixture adjustments.

    • Compact side-hung float bowls
    • Carburetor towers accept 2-5/8-inch period-style air cleaners or air horns
    • Flows 205 CFM
    • Uses commonly available service parts (gaskets, power valves, accelerator pumps, etc.)
    • Achieves higher performance by using contemporary designs of air-entries, air-fuel circuits, and boost venturii
    • Accelerator-pump circuits have interchangeable nozzles (squirters)
    • Adjustable air bleeds provide a means to adjust fuel curves
  • Garage Sale - Barry Grant Demon 98 Retro Carb-Secondary
    Garage Sale
    Garage Sale - Barry Grant Demon 98 Retro Carb-Secondary
    x
                

    Barry Grant's Demon 98 carburetors were designed to replace Stromberg, Ford or Holley 3-bolt base carbs and their variations. By using modern technology and components, they were able to give you a far superior product than previously available.

    The Demon 98 also shares jets, bowl gaskets, needle & seat and other parts used on the Demon 4bbl carbs. They flow 205 cfm each and operate at 6-7 lbs. of fuel pressure and use common 2-5/8" air cleaners. 

    This carburetor operates as a secondary carburetor and should be used with one or more Demon 98 primary carburetors. This secondary carb does not have a choke or idle-mixture adjustments.  Call our Tech Line for assistance in designing your intake.  

    910-9802 Instructions (pdf)

    Effective Monday 2-21-11 this part is now offered without a warranty and is sold "as is". 

     

    This carb is garage sale priced because it has been installed and run, may need to be rebuilt prior to being run.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • Garage Sale - Barry Grant Demon 98 Retro Carb-Secondary
    Garage Sale
    Garage Sale - Barry Grant Demon 98 Retro Carb-Secondary
    x
                

    Barry Grant's Demon 98 carburetors were designed to replace Stromberg, Ford or Holley 3-bolt base carbs and their variations. By using modern technology and components, they were able to give you a far superior product than previously available.

    The Demon 98 also shares jets, bowl gaskets, needle & seat and other parts used on the Demon 4bbl carbs. They flow 205 cfm each and operate at 6-7 lbs. of fuel pressure and use common 2-5/8" air cleaners. 

    This carburetor operates as a secondary carburetor and should be used with one or more Demon 98 primary carburetors. This secondary carb does not have a choke or idle-mixture adjustments.  Call our Tech Line for assistance in designing your intake.  

    910-9802 Instructions (pdf)

    Effective Monday 2-21-11 this part is now offered without a warranty and is sold "as is". 

     

    This carb is garage sale priced because it has been installed and run, may need to be rebuilt prior to being run.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

  • GARAGE SALE - DEMON 98 RETRO 3-BOLT CARBURETOR, SECONDARY
    Garage Sale
    GARAGE SALE - DEMON 98 RETRO 3-BOLT CARBURETOR, SECONDARY
    x
                Please view the product's page for more information
            
  • Garage Sale - Barry Grant Road Demon Jr. 525 Street Carb, 4 Barrel
    Garage Sale
    Garage Sale - Barry Grant Road Demon Jr. 525 Street Carb, 4 Barrel
    x
                

    The Road Demon Jr promises to be the ideal carburetor for budget-conscious enthusiasts needing a carburetor for performance upgrades for stock to mild performance levels.

    The Road Demon Jr shares many of the basic design features of popular Road Demon and delivers crisp throttle response, easy tuning, great fuel economy and great performance.

    These vacuum secondary carbs feature sight glass in bowls, two corner adjustability, adjustable primary jets, three vacuum ports, single inlet and tuning manual. 

    Installation Note:

    The choke plate linkage mechanism will interfere with most air cleaner bases and will require modification for clearance.  Please see photos above for illustration of this interference and the type of modification needed to allow the use of this unit.

     

    This carb is garage sale priced because it has been installed, run and returned.  The rear bowl has a small leak on the top where it seals to the main body.  This one will need to be rebuilt before use.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

     

  • Garage Sale - Barry Grant Road Demon Jr. 4 Barrel Carburetor - 525 CFM
    Garage Sale
    Garage Sale - Barry Grant Road Demon Jr. 4 Barrel Carburetor - 525 CFM
    x
                

    The Road Demon Jr promises to be the ideal carburetor for budget-conscious enthusiasts needing a carburetor for performance upgrades for stock to mild performance levels.

    The Road Demon Jr shares many of the basic design features of popular Road Demon and delivers crisp throttle response, easy tuning, great fuel economy and great performance.

    These vacuum secondary carbs feature sight glass in bowls, two corner adjustability, adjustable primary jets, three vacuum ports, single inlet and tuning manual.  Manual choke.

    Installation Note:

    The choke plate linkage mechanism will interfere with most air cleaner bases and will require modification for clearance.  Please see photos above for illustration of this interference and the type of modification needed to allow the use of this unit.

     Effective Monday 2-21-11 this part is now offered without a warranty and is sold "as is".

     

    This Carburetor is Garage Sale priced because it needs to be rebuilt.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS