Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"dash gauge panel" Page 1 of 4

  • OTB Gear 6128 1928-32 Ford Dash Gauge Panel Mount
    OTB Gear 6128 1928-32 Ford Dash Gauge Panel Mount
    x
                Like to add gauges (or other things) under your '29  to '32 dash? This item matches the contour of your dash, giving you a  level surface to work with. This unpolished aluminum casting is very  lightly scribed with cutoff lines that match the widths of OTB gear  gauge panels. Simply cut to length, drill to your needs, and polish if  desired. Length is 12". Made in USA. 
    • Matches the contour of your '29-'32 dash to give a flat mounting surface below the dash
    • Aluminum casting is very lightly scribed with cutoff lines that match the widths of OTB gear gauge panels
    • Cut to length
    • 12" stock length
  • OTB Gear 6126 Finned 4 Gauge Dash Panel, Polished
    OTB Gear 6126 Finned 4 Gauge Dash Panel, Polished
    x
                Deep finned gauge panel, beautifully cast is  quality aluminum. These deep fins reflect the famous head designs of the  early hot rod era. Cast to fit your 2-1/16" and 2-1/8" gauges. The  textured valleys between the fins will readily grab a contrasting paint  color if desired. The top surface is undrilled so that you can fit to  your needs. Reasonably priced and cool, our under dash gauge panels may  be just what you need to give your rod a distinctive look. 
    • Polished
    • Cast to fit your 2-1/16" and 2-1/8" gauges
    • Size: 12" long by 3-1/4" high
  • 1937-38 Chevy 5-Gauge Dash Panel
    1937-38 Chevy 5-Gauge Dash Panel
    x
                

    Brighten up your Chevy's dash and take advantage of modern instruments with these polished aluminum dash panels.  Gauge panels are set up for 3-3/8" speedometers and 2-1/16" accessory gauges.  Gauges sold separately. 

    Panels has a 3/16" lip around the back side of the whole panel to catch the opening in the dash

    910-0537

    • 4-1/16" x 11-7/8"
  • 1939 Chevy 5-Gauge Dash Panel
    $119.99
    1939 Chevy 5-Gauge Dash Panel
    x
                

    Brighten up your Chevy's dash and take advantage of modern instruments with these polished aluminum dash panels.  Gauge panels are set up for 3-3/8" speedometers and 2-1/16" accessory gauges.  Gauges sold separately. 

    Panels has a 3/16" lip around the back side of the whole panel to catch the opening in the dash

    910-0539

    • 3-15/16" x 11-13/16"
  • 1933-1934 Ford Dash Panel-Auto Meter Gauges
    1933-1934 Ford Dash Panel-Auto Meter Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with AutoMeter gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    • The inside of the Speedo hole is 3.178" and the outer lip is 3.325"
    • Accessory gauge holes have an inside of 2.070" and an outer lip of 2.250"
    • The light holes in this panel are .165" with an outer lip of .250"

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1933-1934 Ford Dash Panel, Stewart Warner Gauges
    1933-1934 Ford Dash Panel, Stewart Warner Gauges
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. For use with Stewart Warner gauges.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators.

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Designed for a 3-3/8" O.D. speedometer and 2-1/16" O.D. auxillary Stewart Warner gauges. 

  • OTB Gear 6124 Finned 3 Gauge Dash Panel, Polished
    OTB Gear 6124 Finned 3 Gauge Dash Panel, Polished
    x
                Deep finned gauge panel, beautifully cast is  quality aluminum. These deep fins reflect the famous head designs of the  early hot rod era. Cast to fit your 2-1/16" and 2-1/8" gauges. The  textured valleys between the fins will readily grab a contrasting paint  color if desired. The top surface is undrilled so that you can fit to  your needs. Reasonably priced and cool, our under dash gauge panels may  be just what you need to give your rod a distinctive look. 
    • Polished
    • Cast to fit your 2-1/16" and 2-1/8" gauges
    • Size: 9" long by 3-1/4" high
  • 1932 Ford Stewart Warner Dash Panels
    1932 Ford Stewart Warner Dash Panels
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recessed lip of the factory or aftermarket dash. For use with Stewart Warner gauges.  Stewart Warner gauges only.

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. Measures approximately 4-3/4" high and 12" wide.

  • Under Dash 2-Hole Mounting Panels
    Under Dash 2-Hole Mounting Panels
    x
                    Beautifully chrome plated panel to make installation of 2-1/16" or  2-1/8" gauges under your dash a snap.         
            
  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • 1940 Ford Dash Panel
    $179.99
    1940 Ford Dash Panel
    x
                

    This billet aluminum dash panel accepts Autometer street rod gauges and will be the finishing touch for your 1940 Ford dash.

    • Accepts Auto Meter or similar gauges
    • Panel held in place with four tabs that screw in from the back side
    • Speedometer hole is 3-3/16" I.D.
    • Gauge holes are 2-1/16" I.D.
    • Includes three recessed 5/32" holes for L.E.D. high beam and turn signal indicators
  • Longacre 44412 AccuTech 2 Gauge Panel w/ Sportsman Gauges, OP/WT
    Longacre 44412 AccuTech 2 Gauge Panel w/ Sportsman Gauges, OP/WT
    x
                Please view the product's page for more information
            
  • Under Dash 1-Hole Mounting Panels
    Under Dash 1-Hole Mounting Panels
    x
                                      Beautifully chrome plated panel to make installation of 2-1/16" or 2-1/8" gauges under your dash a snap.                       
            
  • 1940 Ford Instrument Dash Panel, Chrome
    1940 Ford Instrument Dash Panel, Chrome
    x
                

    This reproduction 1940 Ford dash panel is exactly like original. To install you'll just need to remove your gauge cluster, not the entire dash panel.

    • Chrome finish
    • Exact die cast reproduction of original
    • 1940 Fords

     

  • 1932 Ford Dash Panel
    $129.99
    Product Rating: 5.00 Stars
    1932 Ford Dash Panel
    x
                

    These beautiful billet aluminum dash panels are the perfect finishing touch for your interior. AutoMeter gauges. These are held into a factory dash or equivalent fiberglass dash with four tabs that attach to the back of the billet panel with 4 machine screws, which are included. This billet panel sits down into the recess lip of the factory or aftermarket dash. 

    This panel features three drilled and recessed holes that can be used for mini LED indicator lights. The inside diameter of the hole is 5/32" and the recess around the hole is nearly 1/4" wide for the light bezel around the bulb. The three holes would serve for high beam indicator, and left and right turn indicators. 

    Entire thickness of this panel is 3/8" with 1/4" going through the dash opening and the remaining 1/8" being the lip that sits into the factory style recessed lip of the dash. 

  • 1967-1972 Chevy Truck 3-Gauge Panel
    1967-1972 Chevy Truck 3-Gauge Panel
    x
                

    Give the dash of your 1967-72 Chevy or GMC truck a clean, custom look with this polished billet aluminum gauge panel. The gauge panel bolts into your original dash and accepts a 5 inch speedometer and 5 inch quad gauge, with a 3-3/8 inch tachometer in between. (Gauges sold separately.)

    Matching glove box lid 9101667 sold separately.

  • Finned Five Gauge Panels
    $99.99
    Product Rating: 4.50 Stars
    Finned Five Gauge Panels
    x
                

    Our stylish finned five hole gauge panel has one 3-1/8" and four 2-1/16" holes. Feature two threaded holes in the back for easy mounting. We recommend using with Autometer Gauge set.

    Panel will NOT work with Stewart Warner or Omega gauges.

  • Classic Instruments FT53OE 1953-55 F100 Ford Pickup Dash Gauge Set
    Classic Instruments FT53OE 1953-55 F100 Ford Pickup Dash Gauge Set
    x
                The Classic Instruments 53-55 Ford F-100 package  features a dual layer design encompassing a speedometer, tachometer,  fuel, oil, temp, and volts gauges. This truck package will replace the  original instruments in your truck. For an easy installation, this  cluster is back-loaded and fastened with four bolts and one clamp. This  package is LED lit and includes turn signals as well as a blue “halo”  high beam indicator at the top of the speedometer. With a brushed finish  on the billet aluminum bezel, this package will put the finishing touch  on your custom vehicle. 
    • For '53-'55 Ford F100 truck
    • Package includes 6 gauge set pre-assembled in machined aluminum bezel, with glass, pre wired , Led lit,
    • Turn signal and high beam indicators included
    • Standard Ford sender pack included
  • Aluminum Three Gauge Panels
    From: $27.99
    Aluminum Three Gauge Panels
    x
                

    The perfect finishing touch for your dash. For Autometer 3-1/8" and 2-1/6" street rod gauges only. Gauges not included. These gauge panels have one 3-1/8" hole and two 2-1/16" holes. Choose polished aluminum or chrome.

    • Width at speedo: 4"
    • Width at other end: 3"
    • Thickness of panel: 3/8"
    • Overall length: 9-1/4"
  • Aluminum Four Gauge Panels
    From: $30.99
    Aluminum Four Gauge Panels
    x
                

    The perfect finishing touch for your dash. For Autometer 3-1/8" and 2-1/6" street rod gauges only. Gauges not included. This gauge panel has one 3-1/8" hole and three 2-1/16" holes. Choose polished aluminum or chrome.

    • Width at speedo: 4"
    • Width at other end: 3"
    • Thickness of panel: 3/8"
    • Overall length: 11-3/4"
  • Classic Instruments BelEra II Dash Assembly Gauge Set, 1955-56 Chevy
    Classic Instruments BelEra II Dash Assembly Gauge Set, 1955-56 Chevy
    x
                The BelEra II features superior LED lighting with a  nostalgic to original instrument layout. Incorporated in the cluster  are discretely located turn indicators and a 'halo' glow high beam  indicator. This unit bolts directly into the stock 1955/56 Chevy chrome  bezel. The unit comes complete with a new glass lens and wired for  installation. 
    • Dual layer face simulates original styling
    • 6 Gauge Set
    • Includes senders for typical Chevrolet drive train
    • BelEra Package - 3 3/8" Speedo, 2 1/8" Fuel, Volt, Tach, Temp, Oil
    • Includes new glass
    • Dash chrome Bezel not included
    This gauge set includes:
    • Programmable, electronic speedometer (includes GM style speedo sender)
    • Electronic oil pressure gauge (plus sender)
    • Electronic temperature gauge (plus sender)
    • Fuel level gauge that is compatible with stock Chevy sending unit (does NOT include the fuel sender. You will need to re-use your original fuel sending unit.)
  • Aluminum Five Gauge Panels
    From: $39.99
    Product Rating: 5.00 Stars
    Aluminum Five Gauge Panels
    x
                

    The perfect finishing touch for your dash. For Autometer 3-1/8" and 2-1/6" street rod gauges only. Gauges not included. This gauge panel has one 3-1/8" hole and four 2-1/16" holes. Choose polished aluminum or chrome.

  • Finned Six Gauge Panels
    $138.99
    Product Rating: 5.00 Stars
    Finned Six Gauge Panels
    x
                Our stylish finned six hole gauge panel has two 3-3/8" and four 2-1/16" holes. Feature two threaded holes in the back for easy mounting. 
  • 1955-1959 Chevy Pickup 5 Gauge Panel
    1955-1959 Chevy Pickup 5 Gauge Panel
    x
                

    This polished billet aluminum panel houses one 3-3/8" gauge and four 2-1/16" accessory gauges. Mounts gauges behind the panel. Fits 1955-1959 Chevy pickup truck dash.

    Includes holes for turn signal and high beam indicators (indicator lights not included). Our LED indicator lights 911-31050-COLOR (size 5/32") will fit the pre-drilled holes.

  • Aluminum Sprint Car 2-Gauge Panel, 2-1/16 Inch Gauges
    Aluminum Sprint Car 2-Gauge Panel, 2-1/16 Inch Gauges
    x
                

    This aluminum Sprint Car gauge mount accepts two 2-1/16" gauges with ignition switch hole and quarter turn fastener fastener holes.  You can nest both gauges in a clean, simple, and easily removable plate.

    Sprint Car 2-Gauge Panel

    • 17 ga. aluminum
    • Fits two 2-1/16" gauges
    • quarter turn fastener directly to dash or cowl
    • Includes hole for light or switch
    • Attaches with quarter turn fastener buttons and springs
  • Replacement Dash Gauge Light Bulb for Light Kit 916654
    Replacement Dash Gauge Light Bulb for Light Kit 916654
    x
                

    Swap your burned out, broken, or faulty gauge bulbs in our 916654 light kits with these replacement light bulbs.  They are a 3 watt bulb with in-line straight securing pins for use in most gauges and select speedometers and tachs.

    • Replacement dash/gauge bulbs
    • Fits light kit 916-654
    • 3 watt bulb
    • Sold each
  • 1964-1966 Chevy Pickup 6 Gauge Panel
    1964-1966 Chevy Pickup 6 Gauge Panel
    x
                Six gauge polished billet aluminum panel for 1964-1966 Chevy pickup  truck dash. Made to fit into your OE bezel and is set up for two 3-3/8" gauges and four 2-1/6" accessory gauges.  Accepts 5/32" LED indicator lights.
            
  • American Autowire 500481 1955-59 Chevy Pick-up Wiring Harness
    American Autowire 500481 1955-59 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore.These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included - it's a painless process. For 12 Volt upgrades.

  • 1964-66 Chevy Pickup 5 Gauge Panel
    1964-66 Chevy Pickup 5 Gauge Panel
    x
                Five gauge polished billet aluminum panel for 1964-1966 Chevy pickup truck dash. Made to fit into your OE bezel and is set up for a 3-3/8" speedometer and four 2-1/6" accessory gauges.
            
  • Replacement Dash Light Bulb for 2-1/16 Inch Gauges
    Replacement Dash Light Bulb for 2-1/16 Inch Gauges
    x
                

    Swap your burned out, broken, or faulty gauge bulbs in 2-1/16" size gauges with these replacement light bulbs.  They are a 3 watt bulb with in-line straight securing pins for use in most gauges and select speedometers and tachs.

    • Replacement dash/gauge bulbs
    • Fits 2-1/16" O.D. gauges
    • 12 volt
    • 3 watt bulb
    • Sold each
  • Replacement Dash Light Bulb for Speedway 3-3/8 Inch Gauges
    Replacement Dash Light Bulb for Speedway 3-3/8 Inch Gauges
    x
                

    Swap your burned out, broken, or faulty gauge bulbs in Speedway brand 3-3/8" size gauges with these replacement light bulbs.  They are a 3 watt bulb with wedge style base for use in most gauges and select speedometers and tachs.

    • Replacement dash/gauge bulbs
    • Fits 3-3/8" O.D. gauges
    • Wedge style base
    • 3 watt bulb
    • Sold each
  • Stewart Warner 359CE Green Line Ammeter Gauge, 2-1/16 Inch
    Stewart Warner 359CE Green Line Ammeter Gauge, 2-1/16 Inch
    x
                These Stewart Warner Performance Custom Deluxe  Green Line gauges feature original 1960s artwork and style. They have  polished stainless steel bezels, brushed silver centers, and black faces  with the famous green line. The Stewart Warner Performance Custom  Deluxe Green Line gauges are available in either 2-1/16 in. or 2-5/8 in.  diameters, in your choice of electrical or mechanical, depending on the  gauge style. Whether you are building a custom dash panel or mounting  gauges in a pre-fab panel, these Stewart Warner Performance Custom  Deluxe Green Line gauges bring back the look of old. 
    • 60-0-60 amp range
    • 180º sweep
    • 2-1/16"
    • Electrical Sender
  • 1953-1955 Ford Truck Gauge Panel
    1953-1955 Ford Truck Gauge Panel
    x
                Brighten up your 1953-55 F-100 dash and gain the benefit of modern instruments with this polished billet aluminum dash panel. The ball-milled panel is designed to accept a 3-3/8 inch speedometer in the center, with two 2-1/16 inch accessory gauges on each side. Gauges sold separately.
            
  • Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
    Classic Instruments Gauge Set Dash Assembly, 1967-68 Chevy Camaro
    x
                Classic Instruments '67-'68 Camaro Package gauge  sets dress your classic muscle with modern technology and authentic  looks. Classic combines their 5 in. SpeedTachular and Quad gauges in a  premium OEM reproduction dash bezel to provide you and your Camaro with  all of the accurate data that you need for the roads ahead! This package  is ready to bolt in, come complete with instrument harnesses, and  feature black aluminum bezels, real curved glass, and LED turn signals.  Give your first-generation Camaro or Firebird back its original look,  but with updated precision--add Classic Instruments '67-'68 F-Body  Package gauge sets to your American classic. 
    • Black "Velocity" face design - Blk
    • Black & Green "G-Stock" face design - Gstk
    • For 67-68 Camaro and Firebird
    • Set includes mounting face bezel, pre-assembled bracketry, pre wired, t/s, high beam installed
    • Standard GM sender pack included
    • Fuel level gauge pre-programmed 0-90 ohm to allow stock fuel tank sender to be used
    • No fuel sender included
  • Fiberglass 1956 Ford Truck Gauge Panel
    Fiberglass 1956 Ford Truck Gauge Panel
    x
                This fiberglass panel gives you the freedom to design your own gauge layout in your 1956 F-100. Drill holes to fit the gauges of your choice (gauges sold separately.) Requires trimming your dash slightly at the bottom of the panel opening.
            
  • Classic Instruments MU67VSW Dash Assembly Gauge Set, 1967-68 Mustang
    Classic Instruments MU67VSW Dash Assembly Gauge Set, 1967-68 Mustang
    x
                Velocity Series White Gauge Package. Includes  reproduction housing and face panel.  Fully assembled and wired.   Spectacular white gauge faces and black housing face. Bolts right into  the stock dash of a 1967 or 1968 Ford Mustang.
    • White "Velocity" face design
    • All gauges are pre-mounted into a new OEM type Instrument Housing aftermarket (1967)
    • All gauge packages are complete with a wiring harness that includes GXL18 color coded wires and connectors
    • Gauges included are a 5" 140 MPH Speedometer, 5" 8,000 RPM Tachometer, 2 ¼" Temp, Fuel & Oil
    • Stainless steel bezels with real curved glass lenses
    • Standard Ford sender pack; Speedometer, temp, oil pressure are included in the package.
    • Fuel gauge is set up to operate with stock 75-10 ohm sender
    • Fuel sender not included
Goto Previous PagePrevious Page
1 2 3 4