Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"cylinder chevy aluminum head" Page 1 of 3

  • Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head with a standard exhaust port design.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Five angle valve job
    • Bronze guides
    • Straight plug
    • 3/8" screw-in studs and guide plates
    • Port for temperature probe
    • Works well with most flat tappet street cams

    Flow Numbers:

    • Valve Lift     .400"     .500"     .600"
    • Intake           206       237       244   
    • Exhaust        165       177       187
  • Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    Fel-Pro P1003 S/B Chevy 265-400 Steel Ring Head Gasket 4.166 Inch Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.1 cc
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101500 Bare Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102500 Bare Small Block Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides and a multi angle valve job. These are a pre-1986 design small block Chevy cylinder head. Sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • Machined for 3/8" screw-in studs
    • Machined for 2.02"/1.60" valves
    • Ready for assembly
  • Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, Multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Multi angle valve job
    • Bronze guides
    • 3/8" screw-in studs and guide plates
  • Edelbrock 60819 348/409 Chevy Aluminum Cylinder Heads
    Edelbrock 60819 348/409 Chevy Aluminum Cylinder Heads
    x
                

    These heads are for your '61-'65 348-409 W-Series Chevy engine. They weigh about half what a cast iron head does and are bolt-on. The 220cc intake and 90cc exhaust runners with 2.19" intake and 1.72" exhaust valves will give you a big increase in performance. They are a great match for the large port intakes and are shipped assembled.

    They can be used on 348 engines if limited to a .550" lift. 

    325-60819 Instructions  (PDF)


  • Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
    Fel-Pro P1010 S/B Chevy 265-400 Copper Ring Head Gasket 4.166 In. Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened copper wire
    • Nominal compression thickness: .039"
    • Compressed volume: 8.9 cc
    • Recommended for '86-'91 Corvette aluminum heads. Max 4.155" bore.
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • ARP 135-3603 Big Block Chevy w/Iron and Aluminum Dart Hex Cylinder Head Bolts
    New
    ARP 135-3603 Big Block Chevy w/Iron and Aluminum Dart Hex Cylinder Head Bolts
    x
                

    High Performance head bolts are available with a reduced wrenching hex or 12-point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing.  All High Performance Series bolts are 180,000 psi (which is 15% stronger than Grade 8) and kits come complete with hardened parallel-ground washers.  Fits 396, 402, 427 and 454 B/B Chevy with Iron & Aluminum Dart and other raised runner cylinder heads.

    • Big Block Chevy
    • Fits Flo Tech aluminum heads and others with raised runners
  • Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    Edelbrock 2101 Performer 1955-86 Small Block Chevy Intake Manifold
    x
                

    Edelbrock's famous Performer manifold is designed for street 1955-86 small block Chevys. This manifold is a stock replacement/street legal part for 302/327/350 V8s with OEM 4 bbl. or Edelbrock Performer Series carbs. Will also work on 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR.

    Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. 

    Made in the U.S.A. 

    325-2101 Instructions (PDF)

    NOTE: This intake does not work with kickdown kit 491-2350U.

  • Fel-Pro 1094 S/B Chevy 265-350 Head Gasket, Embossed Ring, 4.100 Bore
    Fel-Pro 1094 S/B Chevy 265-350 Head Gasket, Embossed Ring, 4.100 Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Embossed shim
    • 4.100" gasket bore
    • Nominal compression thickness: .015"
    • Compressed volume: 3.2 cc
    • Not for use with small block 400. Extra thin to increase compression.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Fel-Pro P1034 S/B Chevy 265-400 Steel Ring Head Gasket 4.200 Inch Bore
    Fel-Pro P1034 S/B Chevy 265-400 Steel Ring Head Gasket 4.200 Inch Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Nominal compression thickness: .041"
    • Compressed volume:  9.3 cc
    • Recommended for '86-'91 Corvette aluminum heads. Max 4.155" bore.
    • 4.200" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF) 

  • FelPro Gaskets 1142 S/B Chevy Head Gasket, 4.1 Bore, Multi-layer Steel
    FelPro Gaskets 1142 S/B Chevy Head Gasket, 4.1 Bore, Multi-layer Steel
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Works for 265-350 Small Block Chevy
    • Gaskets are sold each
    • Multi-layer
    • 4.100" gasket bore
    • Nominal compression thickness: .040"
    • Compressed volume: 9.0 cc
    • Not for use with small block 400.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Fel-Pro 1143 SB Chevy 265-400 Head Gasket-4.165 Bore-Multi-layer Steel
    Fel-Pro 1143 SB Chevy 265-400 Head Gasket-4.165 Bore-Multi-layer Steel
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Multi-layer
    • Nominal compression thickness: .041"
    • Compressed volume: 9.2 cc
    • Big bore multi-layer 400 small block Chevy
    • 4.165" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    x
                
    •  2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 306-500 Big Block Chevy Aluminum Cylinder Head, 320cc, Bare
    Flo-Tek 306-500 Big Block Chevy Aluminum Cylinder Head, 320cc, Bare
    x
                
    • 2.250” intake valve, 1.880” exhaust
    • 320cc intake runners
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Fel-Pro P1044 S/B Chevy 265-400 Steel Ring Head Gasket .051 Inch Thick
    Fel-Pro P1044 S/B Chevy 265-400 Steel Ring Head Gasket .051 Inch Thick
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .051"
    • Compressed volume: 11.2 cc
    • OK for small block 400 street use. Extra thick to reduce compression.
    • 4.200" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Fel-Pro P1004 S/B Chevy 400 Head Gasket, Steel Ring, 4.190 Inch Bore
    Fel-Pro P1004 S/B Chevy 400 Head Gasket, Steel Ring, 4.190 Inch Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Pre-flattened steel wire
    • Nominal compression thickness: .041"
    • Compressed volume: 9.2 cc
    • 4.19" bore gaskets can be used on 400 small block race engines with up to 4.155" max bore with minimal chamfer, without steam holes
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • Fel-Pro 1144 S/B Chevy 400 Head Gasket, Multi-layer Steel, 4.200 Bore
    Fel-Pro 1144 S/B Chevy 400 Head Gasket, Multi-layer Steel, 4.200 Bore
    x
                

    These Fel-Pro gaskets work with both cast iron and aluminum heads. Pre-flattened steel wire ring gaskets have the strength of steel wire sealing with minimum brinelling of aluminum heads. Pre-flattened copper wire ring gaskets will not brinell aluminum heads. They offer superior heat dissipation. Multi-layer steel gaskets offer current leading-edge technology and provide a long-term, leakproof seal called Perma Torque MLS.

    • Gaskets are sold each
    • Small Block 400 with steam holes aluminum block and heads or cast-iron heads.
    • 4.166" bore gaskets can be used on 400 race engines with up to 4.155" max bore with minimal chamfer.
    • When using aluminum heads, we recommend gaskets with soft copper wire rings (such as 344-1010). This ensures that the aluminum head is not "scarred" by the combustion seal. Shim style 344-1094 will also work well with aluminum heads.

    Head Gasket Application (JPEG)

  • Dart 127111 SHP 180CC Bare Engine Cylinder Head, Straight, S/B Chevy
    Dart 127111 SHP 180CC Bare Engine Cylinder Head, Straight, S/B Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Machined for 1.250 or 1.437 diameter valve springs
    • Straight spark plug configuration
    180cc Intake port, 64cc combustion Chamber, 2.02/1.60 valve job.  These heads are bare.
  • Flo-Tek 305-505 Big Block Chevy Complete Aluminum Cylinder Head, 320cc
    Flo-Tek 305-505 Big Block Chevy Complete Aluminum Cylinder Head, 320cc
    x
                
    • Stainless swirl polished valves  
    • 2.250” intake valve, 1.880” exhaust
    • 320cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • High performance springs (.600 lift hyd flat tappet)
    • PC seals
    • Hardened locks and retainers
    • 7/16” screw-in studs and guideplates
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Flo-Tek 407-505 Big Block Chevy Complete Aluminum Cylinder Head, 360cc
    Flo-Tek 407-505 Big Block Chevy Complete Aluminum Cylinder Head, 360cc
    x
                
    • Stainless swirl polished valves  
    • 2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • High performance springs (.600 lift hyd flat tappet)
    • PC seals
    • Hardened locks and retainers
    • 7/16” screw-in studs and guideplates
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Dart 127311 SHP 200CC Bare Engine Cylinder Head, Straight, S/B Chevy
    Dart 127311 SHP 200CC Bare Engine Cylinder Head, Straight, S/B Chevy
    x
                The SHP is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • All cylinder heads sold individually
    • Configuration: Bare
    • Combustion Chamber Volume: 64cc
    • Intake Port Volume: 180cc
    • Intake & Exhaust Valves: 2.02/1.60 Valve Job
    • Valve Springs: None
    • Spark Plugs: Straight Plugs
  • BluePrint Engines H8002S Small Block Chevy Aluminum Head
    BluePrint Engines H8002S Small Block Chevy Aluminum Head
    x
                
    • 195cc intake runners
    • 75cc exhaust runners
    • 2.02” and 1.60” stainless steel valves
    • Ultra street performance 1.437” springs for up to .575” lift
    • 115-125 lb seat pressure
    • 295-305 lb open pressure
    • 3⁄8”screw in studs and guideplates
    • Great for hydraulic roller or large flat tappet street cams
    • Straight plug
    • 64cc combustion chamber
    • 3-angle valve job
    • Manganese bronze guides
    • Same head as featured on our exclusive BluePrint 383 Roller
  • KRC KIT16312010Basic Serpentine Drive Kit Crate S/B Chevy Head Mt Pump
    KRC KIT16312010Basic Serpentine Drive Kit Crate S/B Chevy Head Mt Pump
    x
                Please view the product's page for more information
            
  • Dart 127322 SHP 200CC Assembled Engine Cylinder Head-Small Block Chevy
    Dart 127322 SHP 200CC Assembled Engine Cylinder Head-Small Block Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Assembled with 1.437 diameter valve springs
    • Straight spark plug configuration
    Complete head 200cc intake runner 64CC combustion chamber
    2.02/1.60 valves hydraulic roller springs 1.437 diameter
  • KRC KIT16312110 Basic Serpentine Drive Kit-S/B Chevy Head Mt Pump/Tank
    KRC KIT16312110 Basic Serpentine Drive Kit-S/B Chevy Head Mt Pump/Tank
    x
                Please view the product's page for more information
            
  • Powermaster 722 High Mount Alternator Bracket, Small Block Chevy
    Powermaster 722 High Mount Alternator Bracket, Small Block Chevy
    x
                

    This bracket mounts the alternator to the passenger side cylinder head area.  This setup does not interfere with other belt drive systems already in use. This is a replacement bracket for kit part #91068122.

    • Mounts alternator to the passenger side cylinder head
    • Does not interfere with other belt drive systems
    • Replacement bracket for #91068122
    • Aluminum
    • Hardware included
  • Dart 127121 SHP 180CC Assembled Engine Cylinder Head-Small Block Chevy
    Dart 127121 SHP 180CC Assembled Engine Cylinder Head-Small Block Chevy
    x
                The Dart SHP Cylinder Head is cast from A356-T6 aluminum and designed  to work with most off the shelf components, so you won’t need to worry  about acquiring costly custom components.
    • Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
    • Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
    • Hardened exhaust seats are compatible with unleaded gasoline
    • Manganese bronze valve guides extend cylinder head life
    • Assembled with 1.250 diameter valve springs
    • Straight spark plug configuration
    180cc intake runner, 64cc combustion chamber, 2.02/1.60 valves, 1.250 diameter springs for flat tappet camshafts.
  • KRC KIT16320010 SBC Serpentine Drive Kit, Head Mt Pump/Idler Tensioner
    KRC KIT16320010 SBC Serpentine Drive Kit, Head Mt Pump/Idler Tensioner
    x
                Please view the product's page for more information
            
  • Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    Offenhauser 2731 1937-62 Chevy Six Cylinder Valve Cover
    x
                

    We have these hard-to-find covers for your 1937-1962 Chevrolet 216, 235 and 261 engines. These Chevy 6 cylinder finned aluminum Offenhauser valve covers will shine up your old Stovebolt. 

    NOTE: To use on 1954-1962 inline six head, you will need to supply a 1937-1953 style gasket, a pair of washers and stud seals typical of '37-'53, and a pair of acorn nuts to fit the long studs that come with the cover. This cover is a direct replacement for the 1937-1953 Chevy.

  • Platinum Series Shaft Rocker Arms - Chevy 1.5 Ratio
    Platinum Series Shaft Rocker Arms - Chevy 1.5 Ratio
    x
                

    Any top quality engine you look at will have shaft type rocker arms on it, whether it's NASCAR, NHRA or Bonneville racing. The reason is they are the strongest, most reliable rocker arm money can buy. 

    These include fully machined aluminum rockers, premium centerless ground shafts and needle bearings, alloy fasteners and tool steel lash adjusters.

    For S/B Chevy with 23-degree valve aftermarket heads.  

    Instructions (PDF)  

  • Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    New
    GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    x
                Please view the product's page for more information
            
  • KRC 29010010 Pro Aluminum SBC Pump Kit-V-Belt-Head Mount Remote Tank
    KRC 29010010 Pro Aluminum SBC Pump Kit-V-Belt-Head Mount Remote Tank
    x
                
    Starting with all-new Pro Series aluminum pumps designed specifically for racing, these small block Chevy kits come complete with cylinder head mount bracket, spacers, an aluminum reservoir and complete instructions. The pumps have -10 AN inlets, -6 AN outlets and a 6" V-belt pulley.

    466-29010H Instructions (PDF)

  • Oldsmobile Valve Covers for Small Block Chevy
    Oldsmobile Valve Covers for Small Block Chevy
    x
                These neat valve covers are designed to look like the early Oldsmobile valve covers but fit late style small block Chevys using center bolt valve cover cylinder heads.  They can also be used with conventional small block cylinder heads by using the valve cover adapter kit listed below.  Order one set of valve covers and one set of looms.

    910-8202: These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. The plain finish valve covers and indeed plain, die-cast aluminum. Not painted.
  • KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side cylinder head mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • Edelbrock 2114 Performer Chevy 4.3 Vortec V6 Aluminum Intake Manifold
    Edelbrock 2114 Performer Chevy 4.3 Vortec V6 Aluminum Intake Manifold
    x
                

    Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes.

    • Stock/OEM standard deck
    • Dual plane - idle - 5,500 rpm
    • Natural aluminum finish
    • Non-EGR

    325-02114 Instructions (PDF)

    Notes: This intake manifold must be used with 1996 and later Vortec style cylinder heads (even if they are installed on pre-Vortec blocks). Accepts late model water neck, alternator, HEI, and air conditioning. Has provision for external water bypass. Will not accept stock carburetors or 262 TBI unit.

  • BluePrint 383 Small Block Chevy Crate Engine
    BluePrint 383 Small Block Chevy Crate Engine
    x
                Please view the product's page for more information
            
  • GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3