Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Sorry, no search results were found for 'crosswind intake manifold review'.

Please enter another search term above or browse our products by selecting from the options on the left.

Browse All Products Page 1 of 25

  • Low Profile Grease Zerks
    $7.99
    Product Rating: 5.00 Stars
    Low Profile Grease Zerks
    x
                

    Great for spindles and other areas needing added clearance. Stainless steel construction with 5/16" hex head with 1/4 - 28 UNF thread.

    Includes 5 zerks per bag. MUST be used with grease needle # 910-1187.

  • Sill Weather Whisker Strip
    $29.99
    Sill Weather Whisker Strip
    x
                After putting in new glass and window felt run channels, you don't want to reuse your old whisker that's on your garnish moldings, so here's a way to prevent scratching up that new glass. We now offer a 48" long, 9/16" tall whisker strip. Only offered in black.
            
  • Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissions
    Modern Driveline Reverse Switch Harness for GM T5 and T56 Transmissions
    x
                

    These harnesses for transmission neutral safety switch/reverse light switches are designed for use with GM T5 and T56 transmissions.

    • Factory style
    • For GM T5 and T56 transmissions

     

  • MD3 LH Fender New Style
    From: $54.99
    MD3 LH Fender New Style
    x
                The Maximum Downforce nose has 2" of taper built in to allow for chassis set-up and prevent the nose from plowing. Choose White, Red, Chevron Blue, Yellow and Black. Choose Monte Carlo, GTO, Impala SS, Camry, Fusion of Charger graphics. Graphics sold separately.
            
  • Rocker Arm Balls for 7/16 Inch Stud
    Rocker Arm Balls for 7/16 Inch Stud
    x
                Replacement rocker arm pivot balls with oil slots. Comes in a set of 16 for use with 7/16" rocker arm studs.
            
  • 3X Chemistry Satin Rust Encapsulator, Quart
    3X Chemistry Satin Rust Encapsulator, Quart
    x
                3X:Chemistry Encapsulator is a single component, high solids paint   specially formulated to bond to blasted or rusted metal surfaces. The   coating forms a rock hard finish that's flexible, non-porous and will   not crack, chip, flake or peel. No hardeners or activators are needed.   Encapsulator is completely unaffected by salt, gasoline, oils, battery   acids, hydraulic fluids, solvents, chemicals, or corrosives.
    • Permanently stops rust and corrosion
    • Can be sprayed or brushed over rusted surfaces
    • Reusable after opening
    • Highest percentage of solids
    • Available in Satin

    30746817 Material Safety Data Sheet (PDF)

  • Universal Expanding Body Mounts
    Universal Expanding Body Mounts
    x
                

    If you are building a lightweight car like a "T" or an "A", mounting the body may present a problem. These neat expanding rubber universal body mounts allow you to drill a 3/4" hole in the top of the frame, insert a 3/8" coarse bolt, tighten, then the body is mounted.

    Not recommended for cars newer than 1934.

  • Pro Shocks C250/GM300 1955-1957 S/B Chevy V8 Front Coilover Conversion
    Pro Shocks C250/GM300 1955-1957 S/B Chevy V8 Front Coilover Conversion
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original Tri-Five Chevy frame.

    Sold as a PAIR.

  • 14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    14mm to Male AN6 Banjo Bolt Fitting for Power Steering Pump
    x
                

    These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.

    Banjo Bolt Fitting for Power Steering Pump

    • 14mm to Male AN6 
    • Zinc-plated steel assembly
    • For the pressure connection (outlet) to the pump.
    • 90 Degree
    • Swivel
    • Male Threads
  • DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, 6 Inch, Silver, 8 Pack
    x
                

    Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

    • Double-wall construction for added durability
    • Helps prevent burn-through, hardening and cracking of boots
    • Installs in seconds
    • Universal-fits most straight or angled boots
    • Withstands 1200°F direct continuous heat
    • Non-flammable & protects against chemicals & resists water

    Protect-A-Boot Instructions (PDF)

    Exhaust Wrap Frequently Asked Questions (PDF)  

     

  • Tall Model T Cowl-Tail Lights, Black
    Tall Model T Cowl-Tail Lights, Black
    x
                

    Features a 12 volt dual element bulb and can be used as a tail light or a cowl light. 9-1/2" tall with 3" diameter lens. Specify red or amber lens.

    Note: Mount bracket is NOT included. Lens must be secured in place with silicone (see Instructions).

    Cowl Light Installation Instructions (PDF)

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 5.00 Stars
    Titan Tools 51503 Mini Tubing Bender
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • TCI Automotive 950631 Max Shift Circle Track Racing ATF, Quart
    TCI Automotive 950631 Max Shift Circle Track Racing ATF, Quart
    x
                

    TCI® Max Shift™ Circle Track automatic transmission fluid has been tested and proven to enhance drivetrain performance and durability, and it can operate at far greater temperatures than both petroleum-based transmission fluids and synthetic formulas.

    This formula offers several unique benefits to circle track racers, including anti-foaming agents that reduce pump cavitation for more consistent line pressures. Max Shift™ Circle Track also maintains an exceptionally high viscosity level at high temperatures, which increases the life of not only the fluid, but of the clutches and bands, as well. This makes the formula ideal for resistance against high temperature drivetrain wear, as well as fluid breakdown that is common in most high performance circle track racing applications. In addition, applications using a torque converter see minimized slippage, which translates into quicker acceleration on the straightaways.

    Note: Not for street use - this is a racing formulation only.

  • Hidden Tail Gate Latch w/ 21 Inch Straps
    Hidden Tail Gate Latch w/ 21 Inch Straps
    x
                

    The last thing you want on your tricked-out classic truck are beat-up old tailgate latches and rusty tailgate chains. This clean latch setup uses small stainless steel brackets that attach to the tailgate, stainless catch assemblies with spring-loaded nylon buttons that install in the bed sides, and woven nylon check straps to hold your tailgate open without damaging that expensive paint job. It's an easy-to-install system that works as nice as it looks and wont rust or rattle.

    910-00021 Instructions (PDF)

  • Winters Sprint/Midget Rearend Nut for Quick Change Cover
    Winters Sprint/Midget Rearend Nut for Quick Change Cover
    x
                Use these aluminum rear cover nuts on your Winters rear ends. They are sold individually and feature an anodized red finish.
    • Aluminum rear cover nuts
    • Red anodize
    • Fit Winters rearends
    • Sold individually
  • Bassett 3BOLTKIT Beadlock Ring Bolt Kit, Set 18
    Bassett 3BOLTKIT Beadlock Ring Bolt Kit, Set 18
    x
                (18) Grade 8, 5/16"-18 bolts for Bassett beadlock wheels.
            
  • RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    RapidAir M3800 Master Air Line Kit, 1/2 Inch Line
    x
                These airline kits work great for your workshop with  applications from  automotive to woodworking. This is a complete  compressed air  distribution system that is designed to easily install within new walls  or on wall surfaces of existing  workshops/garages.  These kits allow  you to put air lines exactly where  you want them, just like electrical  outlets.   No more dragging hoses  across the shop to your work area.    No special tools required, simply push the flexible tubing into the  fittings and put up your system in an afternoon.
    • 1/2" line 
    • Operating pressure: 175psi at 70° F / 140psi at 140° F
    • Meets OSHA guidelines
    • Temperature range: -40° F to 140° F
    • Compatible with common compressor oils

    Kit Includes:  

    • 100 ft. of 1/2" ID Tubing
    • 3 Outlets
    • 1 Manifold
    • 5 Elbows
    • 1 Tee
    • Tools     (air chuck & filter regulator sold separately)

    Airline Installation Manual (PDF)

    RapidAir Maxline Warranty (PDF)

  • 1909-12 Ford Model T Brass Glass Setting Channel for Open Cars
    1909-12 Ford Model T Brass Glass Setting Channel for Open Cars
    x
                Fits Ford Model T Roadster and Touring open top applications. Designed to use 3/16" thick safety glass or Lexan. Channel holds glass in the original frames.
            
  • 2-1/2 Inch Rear Spring Shackles
    2-1/2 Inch Rear Spring Shackles
    x
                
    • For 2.5" wide leaf springs
    • 1" bushing
    • 2.5" center to center
    • Sold as a pair
  • Pro-Eliminator Rear End Replacement Parts, Integral Coupler Seal
    Pro-Eliminator Rear End Replacement Parts, Integral Coupler Seal
    x
                

    These Pro-Eliminator rear end replacement parts are in stock and ready to order.

    • Integral Coupler Seal

    Pro Eliminator Rear End Part Guide (Link)

  • King Racing Products 2176 Oil Pressure Gauge Fitting Only, -4 AN
    King Racing Products 2176 Oil Pressure Gauge Fitting Only, -4 AN
    x
                

    -4 AN oil pressure fitting.

  • Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    Holley 20-132 LS Accessory Drive Bracket-ALT, P/S, A/C
    x
                Please view the product's page for more information
            
  • Tru-Shot Rechargeable Liquid Sprayer, Black
    Tru-Shot Rechargeable Liquid Sprayer, Black
    x
                

    Great for use with Mudd-Off, Mud-X, Brake Kleen, penetrating oils or solvent based products. Not for all water based products.

    • One quart capacity
    • Powder coated steel can
    • Adjustable nozzle
    • Works with 80-100 psi
  • 1965-72 Chevy Pickup Rear Lowering Kit
    1965-72 Chevy Pickup Rear Lowering Kit
    x
                

    This kit does it all! It lowers your truck 5", Corrects the shock angle so shocks work correctly, AND centers the rear axle. (All this is recommended when lowering 5" or more.) Includes 5" drop springs and shocks, deluxe trac bar, hardware and shock relocation kit.

    Note: C-notch required. Coils come black powder coated. 

  • 1964-66 Chevy Pickup Switch Panel Cover
    1964-66 Chevy Pickup Switch Panel Cover
    x
                

    These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash.  They are designed to fit in place of your switches for a new styled sleek look.

    • Billet aluminum
    • 1964-1966 Chevy Pickup
    • Switch eliminator panel
  • Synthetic Chamois
    $4.99
    $9.95
    Synthetic Chamois
    x
                

    Use on cars, furniture, glass, etc. Can be used wet or dry and washed up to 500 times. Big 26" by 19".

     

     

  • Taylor 20314 14 Inch Braided Grounding Strap Cable
    Taylor 20314 14 Inch Braided Grounding Strap Cable
    x
                These braided grounding straps from Taylor Cable are 14" long 4-gauge and feature tin coated copper construction.
    • 14" long
    • 1" wide
    • Tin coated copper
    • 4-gauge

    Taylor Cable Warranty Sheet (PDF)

  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Sweet Mfg. 001-21040 Rack and Pinion Replacement Boot
    Sweet Mfg. 001-21040 Rack and Pinion Replacement Boot
    x
                

    These high quality rubber replacement boots for Sweet Mfg. rack and pinions perform as good as they look.

    • Replacement for Sweet Mfg. rack and pinion
    • High quality rubber construction

     

  • Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    Dura-Bond FKC-1HP Small Block Chevy Engine Finishing Hardware
    x
                

    Kit Includes:

    • (4) Head Dowels
    • (2) Timing Cover Dowles
    • (3) Cam Bolts
    • (1) Cam Lock Plate
    • (2) Oil Filter Adaptor Bolts
    • (1) Long Woodruff Key
    • (2) Short Woodruff Keys
    • (2) Transmission Dowels
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 3.00 Stars
    Longacre Accuset II Scale Kit
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Twist Lock Shifter Tab
    $2.99
    Twist Lock Shifter Tab
    x
                Weld-on Twist Lock Shifter Tab
            
  • Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    Speedway Dry Erase Marker Board, 17-1/2 Inch x 19-1/2 Inch
    x
                These dry erase boards are great for making notes at the track or  in the garage.  Their convenient 17-1/2" x 19-1/2" size make them easy  to transport. 
    • Stamped aluminum
    • 17-1/2" tall x 19-1/2" wide
  • Power Steering/Coolant Tank Mount
    Power Steering/Coolant Tank Mount
    x
                

    Use this handy 3" tall aluminum bracket to mount your power steering reservoir tank or your coolant overflow expansion tank. Can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.

    Tank NOT included. 

  • ARP Fasteners 100-1110 5/16 Inch Head Header Bolts
    ARP Fasteners 100-1110 5/16 Inch Head Header Bolts
    x
                
    • Great for getting the proper torque in tight spaces
    • 3/8-16 x 1" threads
    • 5/16" hex head
    • Set of 16
  • Speed Fast Stainless Safety Wire, .032 Inch
    Speed Fast Stainless Safety Wire, .032 Inch
    x
                Speed Fast 304 stainless steel safety wire. Sold in one pound rolls and comes with a handy belt clip.
            
  • Shim-Dex Spark Plug Shims, 24 Pack, Close Clearance
    Shim-Dex Spark Plug Shims, 24 Pack, Close Clearance
    x
                New close clearance shims, features a smaller  outside dimension for minimal seat surface. Perfect for All Pro style  heads due to the tight fit of the plug into the head. 

    These stackable spark plug shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees so that you get the most out of your spark plugs without causing overheat and pre-ignition due to thread exposure.
    • Shim-Dex shims rotate the ground of the spark plug at 30 degree intervals anywhere within 360 degrees
    • You won't have to buy extra spark plugs to have them perfectly indexed
    • Shim-Dex shims are reusable many times over
    • Minimal or no thread exposure in the cylinder head that can overheat and cause pre-ignition
    • Shim-Dex shims are so thin they will not adjust the gap too far out of the combustion chamber and negatively affect performance
    • Pack includes 12 silver 60 degree shims and 12 black 90 degree shims
    • Works well with any V8 engine application
    Indexing Your Spark Plugs (PDF)
  • 1932 Ford Interior Door Escutcheon
    1932 Ford Interior Door Escutcheon
    x
                These are used on both the door handles and window crank handles.
    • Polished stainless steel
    • Inside handle escutcheons for 1932 passenger cars
    • Sold Each
  • Grand National Rear Hub Bolts, Pair
    Grand National Rear Hub Bolts, Pair
    x
                

    Pair of Grand National rear end drive flange screws.

    • flathead Allen screws
    • 5/16"-18 x 3/4"
    • 1/2" thread length
    • black oxide coated steel
  • Winters Performance 7271 Grand National Snout Seal
    Winters Performance 7271 Grand National Snout Seal
    x
                2-1/2” double lipped seal with spring seal retainer. Seals around the GN axle.
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25