Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"composite head gasket" Page 1 of 1

  • SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    SuperSeal Small Block Chevy Overhaul Gasket Set, 350 Chevy '67 -'85
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • SuperSeal Small Block Chevy 283-350 Head Gaskets, 4.0 Inch Bore
    SuperSeal Small Block Chevy 283-350 Head Gaskets, 4.0 Inch Bore
    x
                

    SuperSeal Small Block Chevy (SBC) composite head gaskets use premium materials to ensure a positive seal on any race or street engine.

    Sold as each.

  • SuperSeal Small Block Chevy 305 Head Gaskets, 3.736 Inch Bore
    SuperSeal Small Block Chevy 305 Head Gaskets, 3.736 Inch Bore
    x
                

    SuperSeal Small Block Chevy (SBC) composite head gaskets use premium materials to ensure a positive seal on any race or street engine.

    Sold as each.

  • SuperSeal 1955-76 Small Block Chevy Head Gasket Set
    SuperSeal 1955-76 Small Block Chevy Head Gasket Set
    x
                

    SuperSeal Small Block Chevy (SBC) composite head gaskets use premium materials to ensure a positive seal on any race or street engine. Sold in pairs. Gaskets are 0.016" thick.

    NOTE: Only fits 1957-1976 Chevy blocks and heads (they will leak at the bottom of later heads). Will NOT fit 1996-1999 GM "Vortec" 906 heads and 062 heads, or RHS Vortec heads.

  • Fel-Pro Gaskets KS2600 1967-1985 Chevy 350 Overhaul Gasket Set
    Fel-Pro Gaskets KS2600 1967-1985 Chevy 350 Overhaul Gasket Set
    x
                

    The Fel Pro Overhaul Gasket Set includes the composite head gasket, valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Note:  Set contains oil pan gaskets for drivers side dipstick only.

  • Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    x
                

    The Fel-Pro Overhaul Gasket Set includes the composite head gasket (Fel Pro # 8364PT), valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Fits 1970-1980 Small Block Chevy 400 V8.

  • SuperSeal Fuel Injected Small Block Chevy Overhaul Gasket Set, 1987-1993
    SuperSeal Fuel Injected Small Block Chevy Overhaul Gasket Set, 1987-1993
    x
                

    Standard rebuild gasket set features composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan, and rear main seal. Fits Small Block Chevy V8 with 1-piece rear main seal and cast iron heads.

    • 1987-1993 350 fuel injected
    • 1987-1988 350 w/ 4BBL
    • 1989-1993 350 TPI
  • SuperSeal 1969-83 Ford 351W Overhaul Gasket Set
    SuperSeal 1969-83 Ford 351W Overhaul Gasket Set
    x
                Standard rebuild gasket set features composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • SuperSeal 1962 - 1982 Small Block Ford 302 Overhaul Gasket Set
    SuperSeal 1962 - 1982 Small Block Ford 302 Overhaul Gasket Set
    x
                Standard rebuild gasket set features composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • Ford 292-312 Y-Block Header Kit
    Ford 292-312 Y-Block Header Kit
    x
                

    Save money by welding & assembling your own Ford Y-Block headers! Speedway's Ford 292-312 Y-Block header kit features thick 5/16" steel flanges, 1-5/8" header primaries, 3" collectors, composite paper gaskets, and (16) 3/8" x 3/4" header bolts.

  • G-FORCE SA2010 CFG Full Face Racing Helmet, Carbon Fiber, S-XXL
    G-FORCE SA2010 CFG Full Face Racing Helmet, Carbon Fiber, S-XXL
    x
                

    A new take on the previous design from G-FORCE Racing Gear, the CFG is the new standard in functionality and style. From the outside in you will notice the difference. The outer contact shell is made with a ultra-lightweight, Carbon Fiber and composite blend which weighs 15-20% less than standard models. The shell is then coated with deep, rich protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the CFG shell.

    Reinforced mounting points for the Hans® Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System siphons air into the 6 slotted chin bar ports, around the interior and siphons out the 2 top and 2 rear vents to aid in cooling. An optically correct, .125" thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The ProFit Shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design.

    On the inside, G-FORCE Racing Gear has produced the most user fr

  • Bell Dominator 2 SA10 Racing Helmet
    Bell Dominator 2 SA10 Racing Helmet
    x
                

    The legendary Dominator is the most innovative, popular and successful open wheel helmet that Bell has ever produced. The Dominator.2 is a worthy successor to the legacy of the original Bell Dominator helmet and is the next evolution in compact, lightweight aerodynamic helmet design and performance.

    The Dominator.2 has been completely redesigned to incorporate the latest technology and updates while retaining the aggressive and distinctive Dominator styling. The helmet is designed for open wheel racers and kart racers who demand aerodynamic stability, outstanding comfort and fit plus superior ventilation. The Dominator.2 is SA2010/FIA8858 certified, available in sizes 7 1/8 to 7 3/4 in white and rubberized matte black.

    The Dominator.2 features an ultra-lightweight carbon composite shell and retains the traditional Dominator chin bar vents and aero gurneys that are designed into the shell. The Dominator.2’s aerodynamic elements enhance helmet performance by providing greater stability and reduced helmet lift at higher speeds. The wicker gurneys built into the side and top of the shell create an air separation point on the top of the helmet to allow airflow to detach from the helmet reducing buffeting. The helmets front lip gurney and angled chin bar vents add down force to the front of the helmet to prevent lift and improve overall helmet stability.

    Updated features include the 287/3MM SRV-1 visor system

  • Bell Vador SA2010 Racing Helmet
    From: $399.99
    Product Rating: 4.00 Stars
    New
    Bell Vador SA2010 Racing Helmet
    x
                

    The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track, the Vador is certified to the Snell SA10 standard.

    The Vador features a lightweight composit shell, comfortable interior fit and rear facing vents to prevent dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the left side to allow shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Comes with a clear shield and visor strip.

    The Vador features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and installation. Racers can also customize the fit by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. The helmet is available in a rubberized surface that is more resistant to finger prints and smudges.

    The Vador is set up for use with Head and Neck Restraint devices and features Bell's M6 terminal hardware that is incorporated into the helmet. It accepts anchor system hardware. (Consult with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.)

    Size Chart

  • Garage Sale - SuperSeal 1962 - 1982 Small Block Ford 302 Overhaul Gasket Set
    Garage Sale
    Garage Sale - SuperSeal 1962 - 1982 Small Block Ford 302 Overhaul Gasket Set
    x
                

    This item is garage sale priced because it's missing the timing cover and water pump gaskets and front/rear crank seals.  What is shown in the photo is exactly what is included.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS** 

     

    Standard rebuild gasket set features composite head gaskets, intake, valve cover, and oil pan.  Fits 1968-82 Ford 302.