Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Brand Banners -  Wilwood
Searched For:

"complete wilwood brake kits" Page 1 of 2

  • Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    x
                

    Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

    Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

    See Application tab for model-specific information.

    EC80FU E-Brake Cable Instructions (PDF) 

    Connector Cable Installation Instructions (PDF) 

  • Lokar EC-81FHT Stainless Wilwood Style Rear Disc Emergency Brake Cable
    Lokar EC-81FHT Stainless Wilwood Style Rear Disc Emergency Brake Cable
    x
                Please view the product's page for more information
            
  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, vented iron rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .810" wide x 10-3/4" diameter Ultralite HP 30 Vane rotors - plain finish
    • Caliper has a 1/8" NPT inlet

    835-140152 Instructions (PDF)

  • Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    12.19" Big Brake Series features:

    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-1407675 Instructions (PDF)

     

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 2-Piston, Steel Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 2-Piston, Steel Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, solid steel rotors, 2-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Billet Dynapro two-piston calipers - black finish
    • Poly E brake pads
    • .35" wide x 10-3/4" diameter solid rotors - black finish
    • Caliper has a 1/8" NPT inlet

    835-140150 Instructions (PDF)

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Steel Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Steel Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, solid steel rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .35" wide x 10-3/4" diameter solid steel rotors - black finish
    • Caliper has a 1/8" NPT inlet

    835-140151 Instructions (PDF)

  • Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

    11.00" Pro Series Brakes feature:

    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels.

    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

    835-14010996 Instructions (PDF)

     

  • Wilwood 13 Inch Big Brake Kit For A, F, X Body
    Wilwood 13 Inch Big Brake Kit For A, F, X Body
    x
                

    Need a big brake package that can scrub off serious speed and look great doing it? Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditional disc brake spindle applications on classic Chevy muscle cars.  All kits can be used with manual or power boost master cylinders.

    • Forged 4-piston Dynalite Calipers - black finish
    • 13" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 17"

    Instructions (PDF) 

    Application Chart

  • Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes 5/8" narrower upper and offset strutless  lower  control arms, 2" dropped spindles, rubber brake lines, air ride  , new manual or rebuilt power rack & pinion with  bushings  and   new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers  with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt   pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959

  • Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                

    Hub-to-hub kit includes 5/8" narrower upper and offset strutless lower control arms, new standard spindles, rubber brake lines, air ride , new manual or rebuilt power rack & pinion with bushings and new tie rods. The 10-3/4" Wilwood brake kit features GM Metric calipers with rubber hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • New Standard Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Picku

  • Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new  standard spindles, rubber brake lines, air ride springs/shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford P

  • Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    x
                Please view the product's page for more information
            
  • Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower  control arms, new 2"  dropped spindles, rubber brake lines, air ride  springs/shocks, new manual or rebuilt power rack & pinion with  bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM   Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x  4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New 2" Dropped Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossm

  • Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularMopar/Danarear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Ultralite HP 32 Curved Vane Vented Rotor - 12.19" x .810"
    • Forged billet Dynalite four-piston calipers
      • Piston Area (in²): 3
      • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads
    • Aluminum mounting brackets and hardware

    This kit will fit Mopar 8 3/4" and Dana 60 rear axlesequipped with green non-adjustable bearings (Mopar P/N RP400). These kits do not have emergency brake provisions.

    Wilwood Rear Brake Kit Installation Instructions (PDF)

    Axle Flange Identification Chart

    Exploded Installation Schematic

  • Wilwood 140-11013 1937-1948 Ford Heavy Duty Disc Brakes
    Wilwood 140-11013 1937-1948 Ford Heavy Duty Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Heavy Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11.00" diameter Ultralite HP 30 Vane iron rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    835-14011013 Instructions (PDF)

    *NOTE*: See Notes tab for important install info.

  • Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    x
                

    Wilwood'sFDL Pro-Series rear disc kits provide a complete solution for popular GM 12-boltrear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking.

    E-brake cables sold separately. Fits GM 12-bolts with 2.81" offset and OE C-Clip axles. Does not support Special End or C-Clip Eliminator modifications.

    835-1407141 Instructions (PDF)

    Axle Flange Identification Chart

     

     

    Click Here for Exploded Installation Specs

     

  • Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.81 Offset
    Wilwood 140-2111-B Rear Brake Kit - Olds/Pontiac, 2.81 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the uncommon Olds/Pontiac rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Dynalite Rear Axle Kit Installation Instructions (PDF)

    Exploded Installation Schematic 

    Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

    Axle Flange Identification Chart 

  • Wilwood 140-13502 Dynapro Single Right Rear Brake Kit, 10.2 Inch Alum. Rotor
    New
    Wilwood 140-13502 Dynapro Single Right Rear Brake Kit, 10.2 Inch Alum. Rotor
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes can also provide ‘loading’ the rear suspension for additional handling. Kits come complete with caliper, brake pads; caliper mounting brackets, caliper mount bolt kit and rotor.

    • Caliper:
      • Dynapro Single
      • Nickel plate finish
      • 2 piston
      • 2.40" piston area
      • Stainless piston
      • Lug mount type
      • 3" brake pad area
      • Polymatrix Q pad compound
    • Rotor:
      • Aluminum
      • Drilled
      • Black Electro coat
      • 10.2" O.D.
      • 0.31" width
      • Solid vane

    Note: This brake kit has an axle offset of 0

    14013502 Brake Kit Assembly Schematic

  • Wilwood 140-11017 Heavy Duty Front Brake Kit for Mustang II
    Wilwood 140-11017 Heavy Duty Front Brake Kit for Mustang II
    x
                

    Wilwood Forged Dynalite Front Pro Series Brake Kits offer a complete disc brake upgrade solution for Mustang II-equipped street rods and classic pickups. Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. 

    Calipers mount directly to the spindle with a bolt-on aluminum bracket. Forged billet, five lug hubs with direct mount cast iron rotors combine to provide a significant weight savings compared to stock disc brakes. Kits include all new hardware, wheel bearings, seals, brake pads, brackets, and extra length lug studs.

    Aluminum hubs drilled to accept both 5-on-4-1/2" and 5-on-4-3/4" bolt patterns.

    Wilwood Medium Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11" diameter Ultralite HP 30 Vane rotors - bare finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight clear anodized aluminum hubs

    835-1408652 Instructions (PDF)

    *NOTE*: See Notes tab for important install information.
  • Wilwood 140-2115B Rear Brake Kit - Old Big Bearing Ford, 2.36 Offset
    Wilwood 140-2115B Rear Brake Kit - Old Big Bearing Ford, 2.36 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFord big bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    • Piston Area (in²): 3
    • 1/8" NPT inlet
    • Minimum Wheel Diameter (in): 15
    • BP-10 Smart pads

    These kits do not have emergency brake provisions.

    Pro Series Rear Axle Kit Installation Instructions (PDF)

    Axle Flange Identification Chart

    Exploded Installation Schematic

     

  • Wilwood 140-2113-B Rear Brake Kit - Small Bearing Ford, 2.66 Offset
    Wilwood 140-2113-B Rear Brake Kit - Small Bearing Ford, 2.66 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFordsmall bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    These kits do not have emergency brake provisions.

    835-1402113 Instructions (PDF)

    Axle Flange Identification Chart

     

    Click Here for Exploded Installation Schematic

     

  • Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    Wilwood 140-1501-B 1937-1948 Ford Medium Duty Disc Brakes
    x
                Please view the product's page for more information
            
  • Wilwood 140-1013-B Drag Front Brake Kit for Mustang II
    Wilwood 140-1013-B Drag Front Brake Kit for Mustang II
    x
                

    Wilwood Forged Dynalite Front Drag Brake Kit offers a complete disc brake upgrade solution for Mustang II-equipped drag race application under 2800 lbs. Based on the venerable forged billet 4-piston Dynalite caliper, these versatile kits suit the braking requirements and style preferences for an off road drag racing application. 

    Calipers mount directly to the spindle with a bolt-on aluminum bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock disc brakes. Kits include all new hardware, wheel bearings, seals, brake pads, brackets, and extra length lug studs.

    Aluminum hubs drilled to accept both 5-on-4-1/2" and 5-on-4-3/4" bolt patterns. 

    • Forged 4-piston Dynalite Calipers
    • 10.75" diameter solid steel rotors - black oxide finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight clear anodized aluminum hubs

    835-1401013 Instructions (PDF)

  • Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
    Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
    x
                

    Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popular Ford big bearing rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

    These kits do not have emergency brake provisions.

    835-1402118 Instructions (PDF)

    Axle Flange Identification Chart

  • Wilwood 120-9729 Billet Dynapro Caliper-1.38 In. Piston 1.25 In. Rotor
    Wilwood 120-9729 Billet Dynapro Caliper-1.38 In. Piston 1.25 In. Rotor
    x
                Please view the product's page for more information
            
  • Wilwood 120-9737 Billet Dynapro Caliper-1.75 In. Piston 1.25 In. Rotor
    Wilwood 120-9737 Billet Dynapro Caliper-1.75 In. Piston 1.25 In. Rotor
    x
                Please view the product's page for more information
            
  • Wilwood 140-1501-P 1937-1948 Ford Medium Duty Polished Disc Brakes
    Wilwood 140-1501-P 1937-1948 Ford Medium Duty Polished Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements for a light weight Model T or T bucket type chassis. Medium Duty kits are recommended for use on T bucket type cars up to 2200 pounds with rear discs or on cars up to 2000 pounds with rear drums. 

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Medium Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 10.75" diameter solid steel rotors - black oxide finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum hubs

    835-1401501P Instructions (PDF)

    *NOTE*: See Notes tab for important install info. 

  • Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    New
    Wilwood 140-12958 Dynapro Single Midget Alum Left Front Brake Kit
    x
                

    The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force.  Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware.

    • Nickle plated dynalite single caliper
    • 10.2" drilled aluminum front rotor
    • Complete with brake pads, brackets, and bolts
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material: Aluminum
      • Diameter:  10.20"
      • Width:  .310"
      • Vane Count: Solid
      • Design Type:  Aluminum
  • Wilwood 140-11013-P 1937-1948 Ford Heavy Duty Polished Disc Brakes
    Wilwood 140-11013-P 1937-1948 Ford Heavy Duty Polished Disc Brakes
    x
                

    Wilwood Forged Dynalite Pro-Series Front Hub Kits offer a complete disc brake upgrade solution for your 1937-48 Ford spindles. Based on the venerable forged billet Dynalite caliper, these versatile kits suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast.

    Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

    Wilwood Heavy Duty Kits Feature:

    • Forged 4-piston Dynalite Calipers
    • 11.00" diameter Ultralite HP 30 Vane iron rotors - plain finish
    • Wilwood BP-10 SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    835-1402260P Instructions (PDF)

    *NOTE*: See Notes tab for important install info.

  • Wilwood 140-13501 Dynapro Single Right Rear Brake  Kit
    New
    Wilwood 140-13501 Dynapro Single Right Rear Brake Kit
    x
                

    The Dynapro Single Right Rear Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Right Rear Kits contain Aluminum rotors for maximizing weight saving and maximizing brake torque. Right Rear brakes also provide ‘loading’ the rear suspension for additional handling.

    Kits come complete with:

    • Caliper brake pads
    • Caliper mounting brackets
    • Caliper mount bolt kit and rotor

    Calipers:

    • Dynapro Single
    • 2 piston count
    • Stainless piston type
    • Lug mount type
    • Nickel Plate finish

    Rotors:

    • 10.95" diameter
    • 0.31" width
    • Aluminum
    • Drilled style
    • Black Electro Coat surface finish
    • Solid vane count

    Note: This brake kit has an axle offset of 0

    14013501 Brake Kit Assembly Schematic

  • Wilwood 140-12956 Sprint Racing Aluminum Left Front Brake Kit
    New
    Wilwood 140-12956 Sprint Racing Aluminum Left Front Brake Kit
    x
                The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Kits are offered with either Scalloped Alloy Steel Rotors for high heat or Aluminum rotors for maximizing weight saving on light braking tracks. Kits come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware. 
    • Dynapro single caliper Nickel plated
    • 10.95" aluminum drilled rotor
    • Includes bracket, bolts, and pads
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix Q
    • Rotor:
      • Type:  Aluminum
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material:  Aluminum
      • Diameter:  10.95"
      • Width:  .310"
      • Vane Count:  Solid
      • Design Type:  Aluminum
  • Wilwood 140-12957 Sprint Racing Steel Left Front Brake Kit
    New
    Wilwood 140-12957 Sprint Racing Steel Left Front Brake Kit
    x
                The Dynapro Single Left Front Sprint & Midget kits are a further evolution of a proven design from Wilwood’s 35+ years of engineering and producing the best open wheel braking systems. Dynapro single calipers have full 2.40 square inches of area for increased clamping force. Kits are offered with either Scalloped Alloy Steel Rotors for high heat or Aluminum rotors for maximizing weight saving on light braking tracks. Kit come complete with caliper, brake pads, caliper mounting brackets, caliper mount bolt kit, rotor and rotor mounting hardware. 
    • Dynapro single caliper Nickel plated
    • 11" scalloped steel drilled rotor
    • Includes bracket, bolts, and pads
    • Caliper:
      • Type:  Dynapro Single
      • Finish:  Nickel Plated
      • Piston Count:  2
      • Piston Type:  Stainless
      • Mount Type:  Lug
      • Pad Compound:  Polymatrix B
    • Rotor:
      • Type:  Steel
      • Style:  Drilled
      • Finish:  Black Electro Coat
      • Material:  Steel
      • Diameter:  11"
      • Width:  .310"
      • Vane Count:  Solid
      • Design Type: Steel Scalloped
  • Eagle Motorsports 2-1/2 Inch Sprint Racing Front Axle Kit, 50 Inch Long
    Eagle Motorsports 2-1/2 Inch Sprint Racing Front Axle Kit, 50 Inch Long
    x
                

    These all new complete front axle kits from Eagle Motorsports come equipped with everything needed to assemble a Sprint car front end.  They feature Winters aluminum spindles and hubs, chrome powder coated 4130 chromoly tie rods, carbon fiber brake line guards, and Wilwood calipers.

    Kit includes:

    • Eagle 50" long x 2 1/2" O.D. plain finish front axle
    • Eagle two tone black steering arms
    • Winters aluminum spindles/steel snout
    • 5.5" kingpins
    • 2 thrust bearing kits
    • Chrome powder coated 4130 chromoly tie rod
    • 2 FK steel heims, jam nuts
    • Carbon fiber brake line guard
    • Winters black aluminum front hubs
    • Complete LF brake kit with Wilwood caliper
    • All necessary hardware
    Assembly required.
  • Lokar EC-81FU Floor Mount E-Brake Cables for Wilwood & Ford Explorer
    Lokar EC-81FU Floor Mount E-Brake Cables for Wilwood & Ford Explorer
    x
                

    Cables are designed for use with Lokar Floor Mount Emergency Hand Brake (at right). Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

    Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

    See Application tab for model-specific information.

    Note: Cable kit includes Explorer-style clevis 491-81FC.

  • Wilwood 150-12248K BP40 Brake Pads for Narrow Billet Dynalite Caliper
    New
    Wilwood 150-12248K BP40 Brake Pads for Narrow Billet Dynalite Caliper
    x
                

    These brake pads from Wilwood are designed for use with racing applications.  They feature a heavy duty BP40 compound and are intended for use with Wilwood's Narrow Billet Dynalite calipers.

    • BP40 compound
    • Match with Narrow Billet Dynalite caliper
    • Includes one complete axle set (4 pads) 

    Tech Tip: Only use full metallic pads on coated rotors.

    Tech Tip: You can fine tune your car's brake system by selecting different compounds for the front and rear, or side to side. 

    Brake Pad Brand Guide (Link)

    Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

  • Wilwood 260-7563 Tandem Remote Fill Master Cylinder
    Wilwood 260-7563 Tandem Remote Fill Master Cylinder
    x
                

    Tandem remote master cylinders provide one of the safest ways to actuate four wheel or dual caliper axle brake systems. This versatile, lightweight and easily adapted master cylinder provides single pushrod activation of two separate brake fluid circuits. By completely isolating the fluid reservoirs and circuits, the front and rear brakes are able to operate independently of each other and provide a safety net should any one side of the system become inoperable. Shipped complete with the master cylinder and all necessary hardware including 30 inches of hose that can be cut to the desired length for remote mounting of the two 4 ounce fluid reservoirs. 

    • Can be bolted directly to Wilwood single mount pedals
    • 50/50 front/rear brake output from a 1.00" bore with 1.10" stroke
    • Great match for Wilwood's Bolt-On-Disc Brake Kit systems configured from OE components
    • Reservoirs can be either remote or master cylinder mounted

    Tandem Remote Fill Master Cylinder Installation Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

Goto Previous PagePrevious Page
1 2