Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"complete bolt kit" Page 1 of 9

  • Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    Speedway Tribute T-Bucket 9 Inch Ford Rear End Option
    x
                Please view the product's page for more information
            
  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Tru-Lite Titanium Complete Bolt Kit, Maxim Chassis, One Nut RR/DL
    Tru-Lite Titanium Complete Bolt Kit, Maxim Chassis, One Nut RR/DL
    x
                

    Save up to 30% by buying complete Tru-Lite bolt kits! Includes one nut style radius rods and drag links. Available in one-nut shock mount style or quick release shock mount style. Kits include 138 titanium bolts, aluminum and steel nylocks and washers.

    Case not included.

  • Tru-Lite Titanium Complete Bolt Kit, Eagle Chassis, One Nut RR/DL
    Tru-Lite Titanium Complete Bolt Kit, Eagle Chassis, One Nut RR/DL
    x
                

    Save up to 30% by buying complete Tru-Lite bolt kits! Available in one-nut shock mount style or quick release shock mount style. Kits include 138 titanium bolts, aluminum and steel nylocks and washers.

    Case not included.

  • Universal Bolt-Through Engine Mount Cushion Kit
    Universal Bolt-Through Engine Mount Cushion Kit
    x
                

    Connects engine mounts to frame adapters. Heavy duty rubber cushion absorbs vibrations so your mounts won't break. These universal body mounts are required on all motor installations.

    Complete with bolts, washers, and rubber cushions. Does both sides.

    Engine Mounting Illustration (GIF)

  • Tru-Lite Titanium Complete Car Bolt Kit, Eagle Chassis
    Tru-Lite Titanium Complete Car Bolt Kit, Eagle Chassis
    x
                

    Save up to 30% by buying complete Tru-Lite bolt kits! Available in one-nut shock mount style or quick release shock mount style. Kits include 138 titanium bolts, aluminum and steel nylocks and washers.

    Case not included.

  • Tru-Lite Titanium Complete Car Bolt Kit, Maxim Chassis
    Tru-Lite Titanium Complete Car Bolt Kit, Maxim Chassis
    x
                

    Save up to 30% by buying complete Tru-Lite bolt kits! Available in one-nut shock mount style or quick release shock mount style. Kits include 138 titanium bolts, aluminum and steel nylocks and washers.

    Case not included.

  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

  • Speedway Tribute T-Bucket Quick Change Rear End Kit
    Speedway Tribute T-Bucket Quick Change Rear End Kit
    x
                Please view the product's page for more information
            
  • Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    Unisteer 8010540-01 1967-74 GM Power Rack & Pinion Kit
    x
                

    This rack & pinion conversion kit from Unisteer will give your Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety.

    The mounting bracket attaches to the bottom two control arm bolts on the rear of the crossmember. To install, simply remove the existing bolts and replace with the provided longer bolts, bolting the rack up into position. Then unbolt the stock steering arms and replace them with the new steering arms provided and attach the provided outer tie-rod ends, and that is it.

    • Matches stock steering geometry - little to no bump steer
    • Complete bolt on kit - no welding or chassis modification required
    • Works with both big block and small block engines
    • Kit comes standard in black powder coat
    • Works with factory steering pump (new lines required, see Notes)

    Power racks use the 17mm DD spline.  Will work with both B/B and S/B engines. 

    Fits

     

    • 1967-69 Camaro
    • 1968-74 Nova X-Body 

     

    Instructions (PDF)

  • JEI/TI22 Titanium Shock/D-Link/Tie
    JEI/TI22 Titanium Shock/D-Link/Tie
    x
                

    Save up to 30% by buying complete Tru-Lite bolt kits! Available in one-nut shock mount style or quick release shock mount style. Kits include 138 titanium bolts, aluminum and steel nylocks and washers.

    Case not included.

  • AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    AFCO 7250-0200 Complete Rear Disc Brake Kit, 2-1/2 Inch Piston
    x
                Complete kit with standard GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • AFCO 7250-0210 Complete Rear Disc Brake Kit, 2-3/4 Piston
    AFCO 7250-0210 Complete Rear Disc Brake Kit, 2-3/4 Piston
    x
                Complete kit with oversized GM metric calipers. Mounts vented rotors and calipers to 3" tube rearend. Complete with rotors, hats, calipers, brackets, brake pads and slide bolts. Hat fits 4-1/2", 4-3/4" and 5" bolt circle. 
            
  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    Complete Disc Brake Kit 1937-48 Ford, 5 on 5-1/2 BC
    x
                

    This complete disc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindles while retaining the original 5 on 5-1/2" bolt circle.

    This kit will work with spindles having either original steering arms or with flat steel steering arms. It will NOT work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications. Will NOT work with early Ford factory wire or steel drum brake wheels. You will need to use a later disc brake steel wheel or aftermarket wheel.

    910-31909 Instructions (PDF)

  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Swindell Series by Ti64 Complete Spike Chassis Ti Bolt Kit
    Swindell Series by Ti64 Complete Spike Chassis Ti Bolt Kit
    x
                Please view the product's page for more information
            
  • Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
    x
                

    Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

    Can be mounted in a variety of locations within 48" of carburetor.

  • Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    x
                

    Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '49-'54 Chevy style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.

    Chevy Spindle Brake Kit Instructions (PDF) 

  • Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    Economy Bolt-On Front/Rear Brake Kit for Ford Spindle
    x
                Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '37-'41 Ford style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.
            
  • Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    Mustang II Complete 11 Inch Brake Kit, Ford 5 x 4-1/2 Bolt Pattern
    x
                Upgrade your Mustang II based suspension from the stock 9-1/4" rotors to our 11" rotors with powerful single piston GM metric floating calipers. This simple bolt-on conversion requires no machining. For use on 1974-80 Pinto, Bobcat and Mustang II spindles.

    Features a 5 on 4-1/2" Ford/Mopar wheel bolt pattern (increases track width 1/2" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31944 Instructions (PDF)

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM emergency brake style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31924 Instructions (PDF)

  • GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    GM 10 & 12 Bolt Bolt-On Rear Disc Brake Kit
    x
                

    If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This complete kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM metric style calipers, brake pads and hardware.

    • Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles
    • Fits axle with a maximum flange diameter of 6-1/4" O.D.
    • 2.780" rotor center hole
    • Does not fit all 10 & 12 bolt axles. Check Application tab for details. 

    Axle Flange Identification Chart (GIF)

    910-31919 Instructions (PDF)

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 1.59 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts.

    Hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31932 Instructions (PDF)

  • 1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    1965-1969 Chevy Truck 5-Lug Rear Axle Conversion Kit
    x
                

    If you've upgraded your truck's front end to late model 5 -lug on 5" Chevrolet truck bolt circle disc brakes, now is the time to upgrade your rear end. With the availability of 5-lug trailing arm rear ends quickly drying up, we now offer 5-lug axles that will install into your 6-lug rear end. Our axles come pre-drilled with a 5-lug on 5" Chevrolet truck bolt circle and fit 1965-69 rear ends. The axles accept 1971-72 truck drums and use the existing brake hardware. Available as a complete kit with axles, wheel studs and new brake drums or the use of the spider gear set. Will not work with 1960-62 trucks.

    Note: Factory 6-lug applications had 7/16" diameter studs and 5 on 5-lug kits have 1/2" diameter studs. 

  • Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    x
                

    Build a firm foundation for your vintage 1/2 ton Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a complete '47-'54 Chevy pickup frame using only basic hand tools and a drill.

    This triangulated four bar rear suspension will greatly improve both the ride quality and handling of your Chevy.  

    • for 1/2 ton chassis
    • 60" wide 9” rearend housing with welded suspension brackets
    • Chromoly four bars with urethane bushings
    • Bolt-on frame brackets and shock crossmember
    • 11” steel-bodied coil-over shocks

    910-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown. Third member, axle shafts and rear disc brake kit are shown in the photo for reference only, but are not included as part of this kit and are available separately.

  • Ti64 Complete Eagle Motorsports Chassis Ti Bolt Kit
    Ti64 Complete Eagle Motorsports Chassis Ti Bolt Kit
    x
                Please view the product's page for more information
            
  • 1928-1931 Ford Model A Rumble Seat Hinge Kit
    1928-1931 Ford Model A Rumble Seat Hinge Kit
    x
                

    These are top quality reproduction Model A reproduction 1928-1931 rumble seat hinge kits.  These kits include the special shoulder bolts and washers for rumble seat hinge pivot and screws to secure and mount the deck lid to it's hinges.

    • Fits: 1928,1929,1930,1931 Model A Rumble Seats
    • Complete with hinges, the necessary brackets and hardware
  • Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    Weld-On Rear Disc Brake Kit, 1978-88 GM Caliper, 3 Inch Backspace
    x
                

    Replace those old drum brakes with modern rear disc brakes. Mounts .81" x 11-3/4" Pro-lite vented iron rotors and calipers to 3" tube rear end. Complete with rotors, hats, metric calipers (7/16"-20 inlets), brackets, brake pads, caliper brackets and slider bolts. 

    Steel hat fits 5 lug hubs with 4-1/2", 4-3/4", or 5" bolt circle.

    910-31931 Instructions (PDF)

  • Bolt-In 1935-40 Ford Mustang II Crossmember
    Bolt-In 1935-40 Ford Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • 1958-1964 Chevy Disc Brake Kit for Drop Spindles
    1958-1964 Chevy Disc Brake Kit for Drop Spindles
    x
                

    Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets.

    Kit includes:

    • Street brake pads
    • 12" brake rotors
    • GM '69-'77 mid-size single piston iron calipers
    • Caliper slide bolts
    • Rubber brake Lines
    • Bearings & Seals
    • Spindle nut kit 

    Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when compared to the OEM drum brake track width.

  • Unisteer 8001120-01 1967 Mustang Manual Rack & Pinion Conversion Kit
    Unisteer 8001120-01 1967 Mustang Manual Rack & Pinion Conversion Kit
    x
                

    This rack & pinion conversion kit will finally give your classic 1967 Mustang the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The custom steering gear is engineered to match the stock suspension, and has NO BUMP STEER. Installation is extremely simple, since the unit is a true bolt-on.

    Each kit includes everything needed to do a complete installation on a Mustang with the original column.

     

  • Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    Wilwood 140-7141 Rear E-Brake Kit - GM 12 Bolt Axle
    x
                

    Wilwood'sFDL Pro-Series rear disc kits provide a complete solution for popular GM 12-boltrear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking.

    E-brake cables sold separately. Fits GM 12-bolts with 2.81" offset and OE C-Clip axles. Does not support Special End or C-Clip Eliminator modifications.

    835-1407141 Instructions (PDF)

    Axle Flange Identification Chart

     

     

    Click Here for Exploded Installation Specs

     

  • TI64 188 2012 Stallard Micro-Sprint Chassis Titanium Bolt Kit
    TI64 188 2012 Stallard Micro-Sprint Chassis Titanium Bolt Kit
    x
                Please view the product's page for more information
            
  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Stainless Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount.  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    Complete kit includes: polished stainless steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    1932-1934 Four Bar Rear Suspension Instructions (PDF)

    Note: Please be advised that the rods in this kit are shown in a plain steel finish in the alternative photos but do come with a stainless finish as shown in primary photo.

  • Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    Mustang II Complete 11 Inch Front Disc Brake Kit, 5 x 4-3/4 GM Bolt Pattern
    x
                Easily upgrade your Mustang II based suspension from the stock 9-1/4" rotors to 11" rotors with powerful single piston GM midsize floating calipers. Kit requires no machining. For use on 1974-1980 Pinto, Bobcat and Mustang II factory spindles.  

    GM bolt pattern 5 on 4-3/4" (increases track width 1" per side). Includes two 16" front brake hoses and 7/16"-20 banjo bolts with crush washers.

    910-31943 Instructions (PDF)

  • Speedway Mustang II Crossmember for 1962-67 Chevy II/Nova, Bolt-On
    Speedway Mustang II Crossmember for 1962-67 Chevy II/Nova, Bolt-On
    x
                Please view the product's page for more information
            
  • Tru-Lite Titanium Thru-Bolt Style Bolt Kit, Eagle Chassis
    Tru-Lite Titanium Thru-Bolt Style Bolt Kit, Eagle Chassis
    x
                Through-bolt style bolt kit complete with 138 titanium bolts and aluminum and steel nylocks/washers. For Eagle Sprint Car chassis.
            
  • ARP 250-3003 Ford 8.8 and 9 Inch Rear End Ring Gear Bolt Kit, 12pt
    New
    ARP 250-3003 Ford 8.8 and 9 Inch Rear End Ring Gear Bolt Kit, 12pt
    x
                These ring gear bolt kits come complete with 10 black oxide 3/4" 12-point bolts.  They are designed for use with 8.8" and 9" Ford rear ends.
    • 8.8 and 9" Ford ring gear bolts
    • 3/4" head
    • 7/16-20 thread
    • .750 under head length
Goto Previous PagePrevious Page
1 2 3 4 5 ... 9