Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"coil kit street rod" Page 1 of 9

  • Carrera 2254C Street Rod Rear Coil Over Shock Kit, 165 lbs. Rate
    Carrera 2254C Street Rod Rear Coil Over Shock Kit, 165 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • QA1 Adjustable 12 Inch Coil-Over Shock Kit
    QA1 Adjustable 12 Inch Coil-Over Shock Kit
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Has 5/8" I.D. mounting eyes and includes 1/2" bushing. Sold as a pair.

    Note: Shock lengths represent mounted length at ride height.

    Coil-Over Chart (Link)

    Coil-Over Mounting Guide (GIF)

  • Carrera 2254B Street Rod Rear Coil Over Shock Kit, 140 lbs. Rate
    Carrera 2254B Street Rod Rear Coil Over Shock Kit, 140 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing
    • Lightweight chrome-silicon springs, guaranteed within 2% of rate and height

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • Carrera 2254E Street Rod Rear Coil Over Shock Kit, 225 lbs. Rate
    Carrera 2254E Street Rod Rear Coil Over Shock Kit, 225 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • QA1 Adjustable 14 Inch Coil-Over Shock Kit
    QA1 Adjustable 14 Inch Coil-Over Shock Kit
    x
                Please view the product's page for more information
            
  • Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate
    Carrera 2254D Street Rod Rear Coil Over Shock Kit, 200 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • QA1 Adjustable 11 Inch Coil-Over Shock Kit
    QA1 Adjustable 11 Inch Coil-Over Shock Kit
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Has 5/8" I.D. mounting eyes and includes 1/2" bushing. Sold as a pair.

    • Billet aluminum shock body
    • 5/8" centerless ground, hard chrome plated, solid piston rod
    • Deflective Disc Valving
    • 3-step sealing system
    • 18-position adjuster knob changes the rebound valving
    • Allows suspension control in one easy-to-reach location
    • 100% dyno tested and serialized
    • Revalveable and rebuildable by QA1 authorized service centers
    • 2-1/2" I.D. chrome-silicon spring
    • Guaranteed to stay within 2% of rate and length FOR LIFE

    Note: Shock lengths represent mounted length at ride height.

    Coil-Over Chart (Link)

    Coil-Over Mounting Guide (GIF)

  • QA1 Adjustable 15.3 Inch Coil-Over Shock Kit
    QA1 Adjustable 15.3 Inch Coil-Over Shock Kit
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Has 5/8" I.D. mounting eyes and includes 1/2" bushing. Sold as a pair.

    Note: Shock lengths represent mounted length at ride height.

    Coil-Over Chart (Link)

    Coil-Over Mounting Guide (GIF)

  • Carrera 2254A Street Rod Rear Coil Over Shock Kit, 115 lbs. Rate
    Carrera 2254A Street Rod Rear Coil Over Shock Kit, 115 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • Carrera 2254F Street Rod Rear Coil Over Shock Kit, 275 lbs. Rate
    Carrera 2254F Street Rod Rear Coil Over Shock Kit, 275 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • Carrera 2254G Street rod Rear Coil Over Shock Kit,450 lbs. Rate
    Carrera 2254G Street rod Rear Coil Over Shock Kit,450 lbs. Rate
    x
                

    Carrera Street Rod Series coilovers are ideal for use with rear suspensions. Features beautifully chrome plated shocks and springs. The non-adjustable, gas pressurized and radial tuned shocks provide an excellent ride.

    Each kit includes:

    • (1) Chrome 1.63" steel body shock
    • (1) Chrome 10" spring
    • (1) Polished aluminum spring mounting kit
    • Mounted Length:  12-3/8"
    • Compressed Length:  9-3/4"
    • Extended Length:  14-5/8" 
    • Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing

    Coil-Over Mounting Guide (GIF)

    Carrera Spring Rate Chart (GIF)

    Coil-Over Illustration (Link)

  • QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch
    QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 11-3/4" - 12-1/4" @ ride height
    • 14" extended, 10-1/8" compressed
    • Use 10" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • QA1 US304 Adjustable Shock and Coilover Kit w/o Spring, 11 Inch
    QA1 US304 Adjustable Shock and Coilover Kit w/o Spring, 11 Inch
    x
                Please view the product's page for more information
            
  • QA1 US602 Adjustable Shock and Coilover Kit w/o Spring, 15.3 Inch
    QA1 US602 Adjustable Shock and Coilover Kit w/o Spring, 15.3 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 15"-15-3/4" @ ride height
    • 18-3/4" extended, 12-1/2" compressed
    • Use 14" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • QA1 US502 Adjustable Shock and Coilover Kit w/o Spring, 14 Inch
    QA1 US502 Adjustable Shock and Coilover Kit w/o Spring, 14 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 13-3/4" - 14-1/4" @ ride height
    • 17" extended, 11-5/8" compressed
    • Use 12" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 4 Inch Stroke, 10 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 4 Inch Stroke, 10 Inch Comp.
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • 4 Inch Stroke
    • 10 Inch Compression
    • 14 Inch Extension
    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • Panhard Bar Rear Weld-on Kits
    Panhard Bar Rear Weld-on Kits
    x
                

    Use on almost any street rod. Required for coil spring and coil-over rear suspensions. Complete kit includes rod, brackets and 5/8" hardware. Ready to install. 25.5" long.

    916-49022 Instructions (PDF)

  • AFCO 3830C 3 Inch Double Adjustable Coilover Shock w/o Spring
    AFCO 3830C 3 Inch Double Adjustable Coilover Shock w/o Spring
    x
                Please view the product's page for more information
            
  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 3 Inch Stroke, 9 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 3 Inch Stroke, 9 Inch Comp.
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • AFCO 3850C 5 Inch Double Adjustable Coilover Shock w/o Spring
    AFCO 3850C 5 Inch Double Adjustable Coilover Shock w/o Spring
    x
                Please view the product's page for more information
            
  • AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    AFCO Non-Adjustable Alum. Coil-Over Shock Kit, 7 Inch Stroke, 13 Inch Comp.
    x
                

    AFCO has been building racing shocks for over 20 years and are now applying their technology to street rod shocks. These aluminum coilover shock kits have superior FIXED valving that will give you a better ride and improve handling.

    • Each shock is hand built and dyno tested
    • Supplied with two 5/8" I.D. polyurethane bushings
    • Includes AFCO Mirror Finish coilover springs in the rate of your choice
    • Kit includes (2) shocks, (2) springs, and (2) coil-over hardware kits
  • AFCO 3840C 4 Inch Double Adjustable Coilover Shock w/o Spring
    AFCO 3840C 4 Inch Double Adjustable Coilover Shock w/o Spring
    x
                Please view the product's page for more information
            
  • AFCO 3870C 7 Inch Double Adjustable Coilover Shock w/o Spring
    AFCO 3870C 7 Inch Double Adjustable Coilover Shock w/o Spring
    x
                Please view the product's page for more information
            
  • Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    Deluxe Coil-Over Rear Suspension Kit, Plain Finish
    x
                

    This rear suspension kit is loaded with high quality components from Speedway and Carrera. Kit includes a steel panhard bar, chrome plated Carrera coil-over shock assemblies, bare steel 32" radius rods, and all mounting brackets and hardware. The Carrera 3-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Welding is required for assembly.

    • Kit includes:
      • Steel panhard bar
      • Chrome plated Carrera coil-over shock assemblies
      • Bare steel 32" radius rods
      • All mounting brackets and hardware

    Comes with your choice of spring rate. Use the Spring Rate Guide and Coil-Over Mounting guide to select to proper rate for your vehicle.

    Spring Rate Guide (GIF) 

    Coil-Over Mounting Guide (GIF) 

    916-49060 Instructions (PDF)

  • AFCO Double Adjustable Coilover Shock w/ Spring Kit, 4 Stroke, 10.9 Comp.
    AFCO Double Adjustable Coilover Shock w/ Spring Kit, 4 Stroke, 10.9 Comp.
    x
                

    No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance.

    These shocks have 1/2" rod ends installed and 5/8" i.d. polyurethane bushings are also included for alternative mounting options. Also included are AFCO Mirror Finish coilover springs in the rate of your choice.

    • Internal valve design provides sensitivity, response, control, performance, and a smooth ride
    • Machined aluminum body for long lasting good looks & lightweight performance
    • Built-in coil-over mount & threaded body for easy ride height adjustment
    • Every shock dyno-tested to ensure the highest quality standards
    • Made in the USA

    Front Coil-Over Mounting Guide (GIF)  Rear Coil-Over Mounting Guide (GIF)

     

  • Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    Speedway Model T, A, 1932-34 Four-Bar Rear Suspension Kit, Plain Steel
    x
                

    Features heavy wall 21-1/2" rods with plain steel brackets. Exclusive sandwich-style brackets give greater bar support and incorporate a multi-position lower coil-over mount. 

    Complete kit includes: mild steel rods, steel brackets, bushed rod ends, and hardware. Lower coil-over shock mount stud not included. The nuts & bolts supplied in this kit are NOT polished or plated.

    • Rod length is 21-1/2"
    • Center-to-center of 4-bar eyelets is 5.5"
    • Bracket width is 1.39"

    This kit comes in two varieties:

    • TA - to fit narrow frames such as Model T or Model A
    • 3234 - to fit wider frames such as 1932-1934 Ford

    Note:  Four bar rear suspension kits require the use of a side to side control such as a panhard bar or a watts link component.

    916-49055 Instructions (PDF)

  • Universal Coil Spring Control Kit
    $14.99
    $23.39
    Universal Coil Spring Control Kit
    x
                Universal coil spring control kit is easy to install and can be used in place of spring spacers for quick, easy height  adjustment. May also be used to compress springs to lower ride height. These controls can improve weight transfer and give you that "Hot  Stocker" look on a budget.
    • Two per set
    • Easy to install
    • Lift Or Lower 1" Up To 2"
    • Spreads or Compresses Coil Springs
    • Dual Saddles Hold Coil Spring In Proper Alignment
    • Get that "Hot Stocker" look on a budget
  • Basic 1923 T-Bucket Frame Kit
    From: $1,999.99
    Basic 1923 T-Bucket Frame Kit
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

     

     

  • AFCO Double Adjustable Coilover Shock w/ Spring Kit, 3 Stroke, 9.9 Comp.
    AFCO Double Adjustable Coilover Shock w/ Spring Kit, 3 Stroke, 9.9 Comp.
    x
                

    No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance.

    These shocks have 1/2" rod ends installed and 5/8" i.d. polyurethane bushings are also included for alternative mounting options. Also included are AFCO Mirror Finish coilover springs in the rate of your choice.

    • Internal valve design provides sensitivity, response, control, performance, and a smooth ride
    • Machined aluminum body for long lasting good looks & lightweight performance
    • Built-in coil-over mount & threaded body for easy ride height adjustment
    • Every shock dyno-tested to ensure the highest quality standards
    • Made in the USA

    Front Coil-Over Mounting Guide (GIF)     Rear Coil-Over Mounting Guide (GIF)

     

  • AFCO Double Adjustable Coilover Shock w/ Spring Kit, 7 Stroke, 13.9 Comp.
    AFCO Double Adjustable Coilover Shock w/ Spring Kit, 7 Stroke, 13.9 Comp.
    x
                

    No other street rod shock on the market can trump the quality or features of AFCO's R-Series Double-Adjustable Billet Aluminum Coilovers. You can now adjust both compression and rebound with a twist of your wrist. Double adjustments give the tuner the ability to fine tune every aspect of chassis movement to provide the ultimate in launch control, smooth ride, cornering ability, or a combination of all three for the best overall performance.

    These shocks have 1/2" rod ends installed and 5/8" i.d. polyurethane bushings are also included for alternative mounting options. Also included are AFCO Mirror Finish coilover springs in the rate of your choice.

    • Internal valve design provides sensitivity, response, control, performance, and a smooth ride
    • Machined aluminum body for long lasting good looks & lightweight performance
    • Built-in coil-over mount & threaded body for easy ride height adjustment
    • Every shock dyno-tested to ensure the highest quality standards
    • Made in the USA

    Front Coil-Over Mounting Guide (GIF)  Rear Coil-Over Mounting Guide (GIF)

     

  • Carrera SR2254P Street Rod Shock
    Carrera SR2254P Street Rod Shock
    x
                

    Carrera Street Rod Series shock feature beautifully chrome plated 1.63" OD steel bodies. These three-way adjustable, gas pressurized and radial tuned shocks provide an excellent ride. Shock accepts 7/16" or 5/8" bolt for top bushing and 5/8" bolt in bottom bushing.

    Coil-over compatible with addition of kit 255-1951.

  • QA1 7888-109 Coil-Over Thrust Bearing Kit
    QA1 7888-109 Coil-Over Thrust Bearing Kit
    x
                

    This kit installs at the bottom of the 2-1/2" I.D. coil-over spring and allows easier adjustment of your ride height.

    • Includes two bearings and four washers
    • Kit services two coilovers
    • 2.512" I.D.
    • 3.233" O.D.
  • Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, steel 2" dropped spindles, Rubber Brake Lines, Carrera coil-over shock & spring, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • Carrera coil-over shock & spring
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Channeled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, No Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, Unchanneled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    Basic 1923 T-Bucket Frame Kit w/ Standard Body and Bed, No Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    All of our T kits are also available with chrome suspension.  This option includes chrome plated: front and rear hairpins, rear coilovers, front axle, front leaf spring, front shocks, steering arms, tie rod, drag link, and related hardware.  

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Coil-Over Spanner Wrench
    $6.99
    Product Rating: 4.09 Stars
    Coil-Over Spanner Wrench
    x
                

    This coilover adjustment tool allows for easy adjustment of ride height on your coil-over shocks. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use. Spanner wrench will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits, which makes it a must have if you have coil-over shocks!

    • Adjustment of ride height on your coil-over shocks
    • Will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits

    Note: To make easier use of these wrenches, it is recommended that spring pressure be relieved before adjusting. We also recommend using a coil-over bearing kit between your spring and adjuster nut for much easier movement.

     

  • Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, Channeled Floor
    Basic 1923 T-Bucket Frame Kit w/ Deluxe Body, Channeled Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

  • Basic 1923 T Frame Kit w/ Deluxe Body & Bed, Flat Floor
    Basic 1923 T Frame Kit w/ Deluxe Body & Bed, Flat Floor
    x
                

    It doesn't get any simpler than this! Our most basic T-bucket frame is engineered for a simple and economical coil spring rear suspension with traditional-style radius rods. The front suspension is our time-tested transverse-leaf, spring-behind-axle setup with hairpin-style radius rods. Designed for the do-it-yourselfer, this frame has no front shock mounts - you can fabricate your own or choose from those offered by Speedway!

    Shown with optional rearend and engine mounts installed. This part number does not include a rear axle housing or engine/transmission mounts (as pictured). If you wish to add these items to your chassis, simply purchase these items along with your frame kit. 

    Body Dimensions

    • Total Length:  52"
    • Firewall Width:  26.5"
    • Body Width:  45"
    • Body Height:  24"

    Chassis Exploded View (Link)

    This item requires a 3-4 week build time.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 9