Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"clutch pressure plates" Page 1 of 4

  • Flathead 10 Inch Long-Style Clutch Pressure Plate
    Flathead 10 Inch Long-Style Clutch Pressure Plate
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10" Long-style pressure plates for the flathead V8. This pressure plate has a 6 bolt pattern divided up into 3 groups of 2 with a 3.125” center-to-center.

    Pressure plate bolt pattern must match your flywheel!

    T-5 and Adapter Tech Tips (Link)

  • Flathead 10 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    Flathead 10 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10" clutch discs for the flathead V8. They replace 10" OEM with a 11-5/8" bolt circle.

    These premium organic clutch friction discs are for use with flathead Ford V8 to S-10 T-5  transmission conversions.

    Flathead 10 Inch Clutch Disc

    • 1 Inch 14-Spline 
    • Early Ford Flatheads
    • S-10 T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

     

  • Flathead 10-1/2 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    Flathead 10-1/2 Inch Clutch Disc, 1 Inch 14-Spline, S-10, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10-1/2" clutch discs for the flathead V8.

    These premium organic clutch friction discs are for use with flathead Ford V8 to S-10 T-5  transmission conversions.

    Flathead 10-1/2 Inch Clutch Disc

    • 1 Inch 14-Spline 
    • Early Ford Flatheads
    • S-10 T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

  • 1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
    1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
    x
                This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

    Included:
    • Bellhousing
    • 153 Tooth Lightweight Flywheel
    • ARP Flywheel Bolts
    • 10-1/2" Lightweight Pressure Plate
    • ARP Pressure Plate Bolts
    • Solid Hub Organic Clutch Disc
    • Hydraulic Release Bearing
    • Extended Pilot Bearing
    • Clutch Alignment Tool
  • Speedway 10-1/2 Inch Pressure Plate, 13.4 Lbs.
    Speedway 10-1/2 Inch Pressure Plate, 13.4 Lbs.
    x
                

    Speedway developed these 10.5" clutch pressure plates for sportsman circle-track racers. Includes a lightweight, stock-appearing pressure plate that features a ductile iron pressure ring. Can be used with solid or sprung hub clutch discs with organic or ceramic friction surfaces.

    This pressure plate can be used with stock or aftermarket flywheels drilled for the 10.5” clutch pattern.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Speedway Chevy T-5 Transmission to Flathead Adapter Kit
    Speedway Chevy T-5 Transmission to Flathead Adapter Kit
    x
                

    Adapt GM/Chevy T-5 transmission to 1932-48 Ford or 1939-50 Mercury engines. Allows use of your early Ford clutch release shaft and fork.

    This Kit contains a Ford style throwout bearing that requires a Ford long style pressure plate (three finger). Such as Part #'s 9101565191015657, or 91015635

    Kit includes aluminum adapter, original Flathead style release bearing, throwout bearing return spring, adapter sleeves, and ball-bearing type pilot bearing.

    Installation Notes (PDF)

  • Flathead 9 Inch Long-Style Clutch Pressure Plate
    Flathead 9 Inch Long-Style Clutch Pressure Plate
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 9" Long-style pressure plates for the flathead V8.

    Note: This pressure plate will only fit stock Ford flathead V8 flywheels. Pressure plate has a 6 bolt pattern divided up into 3 groups of 2 with a 2.830” center to center.

    T-5 and Adapter Tech Tips (Link)

  • 1955-79 Chevy/GM Street Series Clutch Kit, 11 Inch w/ 1-1/8 Inch-10 Spline
    1955-79 Chevy/GM Street Series Clutch Kit, 11 Inch w/ 1-1/8 Inch-10 Spline
    x
                

    These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.

    • Stronger, more agressive clutch than stock
    • Retains stock pedal feel
    • Perfect for mild engines

    Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 

  • Speedway 10-1/2 Inch Pressure Plate, 15.3 Lbs.
    Speedway 10-1/2 Inch Pressure Plate, 15.3 Lbs.
    x
                

    Speedway developed these 10.5" clutch pressure plates for sportsman circle-track racers. Includes a lightweight, stock-appearing pressure plate that features a ductile iron pressure ring. Can be used with solid or sprung hub clutch discs with organic or ceramic friction surfaces.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Flathead 10-1/2 Inch Long-Style Clutch Pressure Plate
    Flathead 10-1/2 Inch Long-Style Clutch Pressure Plate
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10.5" Long-style pressure plates and clutch discs for the flathead V8. Replaces 10" OEM with a 11-5/8" bolt circle.

    Pressure plate bolt pattern must match your flywheel! 

    T-5 and Adapter Tech Tips (Link)

  • Flathead 10-1/2 Inch Diaphragm Style Clutch Pressure Plate
    Flathead 10-1/2 Inch Diaphragm Style Clutch Pressure Plate
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10.5" diaphragm-style pressure plate for your flathead V8.

    Pressure plate has 6 bolts evenly spaced on a 11-5/8" bolt circle. Requires the use of a GM style release bearing and a GM transmission.

  • Ram Clutches 801 10-1/2 Inch GM Pressure Plate, Aluminum Ring, 13.5 Lb
    Ram Clutches 801 10-1/2 Inch GM Pressure Plate, Aluminum Ring, 13.5 Lb
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a billet aluminum pressure ring with a riveted steel heat shield which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches. 

    Used in conjunction with a Ram six paddle solid hub disc, the aluminum ring plate combination weighs in at just over 15 pounds. If your rules require a full facing or sprung hub disc, the Ram 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set. 

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 401CT 10.5 Inch GM Pressure Plate, Nodular Ring, 14.1 Lb
    Ram Clutches 401CT 10.5 Inch GM Pressure Plate, Nodular Ring, 14.1 Lb
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches. 

    If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 1675L 10.5 Inch GM Pressure Plate, Nodular Ring, 15.18 Lb
    Ram Clutches 1675L 10.5 Inch GM Pressure Plate, Nodular Ring, 15.18 Lb
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches. 

    If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 851 10.5 In. GM Pressure Plate-Billet Steel Ring, 13.5 Lb
    Ram Clutches 851 10.5 In. GM Pressure Plate-Billet Steel Ring, 13.5 Lb
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches. 

    If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 401 10-1/2 Inch GM Pressure Plate, Nodular Ring 17.5 Lbs
    Ram Clutches 401 10-1/2 Inch GM Pressure Plate, Nodular Ring 17.5 Lbs
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches. 

    If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram Clutches 834 10-1/2 Inch Ford Pressure Plate, Aluminum Ring, 13 Lb
    Ram Clutches 834 10-1/2 Inch Ford Pressure Plate, Aluminum Ring, 13 Lb
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a billet aluminum pressure ring with a riveted steel heat shield which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches.

    Used in conjunction with a Ram six paddle solid hub disc, the aluminum ring plate combination weighs in at just over 15 pounds.

    If your rules require a full facing or sprung hub disc, the Ram 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ace Mfg. 10-1/2 Inch GM Pressure Plate, 15 lbs.
    Ace Mfg. 10-1/2 Inch GM Pressure Plate, 15 lbs.
    x
                

    Ace Manufacturing and Parts Company is a manufacturer of heavy duty clutches and clutch components, and is known throughout the industry as an innovative leader in clutch technology.

    Whether your ride has just been mildly modified or transformed into a real fire-breather, you need to consider Ace Manufacturing pressure plates. They're made in both fixed and adjustable static-pressure configurations, incorporating explosion-resistant plates made of steel or aluminum, plus features such as chrome-vanadium springs, heavy-duty covers, and high-strength hardware.

    This 10-1/2" racing clutch for GM applications is the perfect choice for Hobby or Street Stock racing.

    • 10-1/2" diameter
    • 15 lbs.
    • GM applications
  • Quarter Master 105401 5 1/2 Inch V-Drive Clutch Pressure Plate
    Quarter Master 105401 5 1/2 Inch V-Drive Clutch Pressure Plate
    x
                

    Service replacement parts for Quater Master 5.5" V-Drive Clutch

    Quarter Master Engineering & Design (PDF)

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     


  • Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    Ram Clutches 434 10-1/2 Inch Ford Pressure Plate, Nodular Ring 18 Lbs
    x
                

    Ram clutches for 'stock clutch rule' classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches.

    If your rules require a full facing or sprung hub disc, the Ram 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.

    All Ram street stock clutches are completely rebuildable by the factory.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Flathead 9 Inch Clutch Disc, 1 Inch 14-Spline, S-10 T-5 Transmission
    Flathead 9 Inch Clutch Disc, 1 Inch 14-Spline, S-10 T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 9" clutch discs for the flathead V8.

    These premium organic clutch friction discs are for use with flathead Ford V8 to S-10 T5 transmission conversions.

    These T5 clutch discs work with our new Flathead flywheels (p/n 91015627/91015629), and with original flywheels when doing T5 conversions.

    Flathead 9 Inch Clutch Disc

    • 1 Inch 14-Spline 
    • Early Ford Flatheads
    • S-10 T5 transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2". 

     

  • Ram Clutches 41122 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
    Ram Clutches 41122 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
    x
                

    Ram designed their 7-7/8" Clutch specifically for the rigors of racing - its not just a reworked stock clutch. Weighs 8.5 pounds

    Pressure plate only, disc and flywheel are sold seperate. 

  • ARP Fasteners 130-2201 Chevy Pressure Plate Bolts
    ARP Fasteners 130-2201 Chevy Pressure Plate Bolts
    x
                

    The importance of pressure plate bolts in a racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed these special High Performance Series pressure plate bolts that are application specific to ensure the optimum grip length. 

    • Made from a premium grade chromoly
    • Hardened to a nominal tensile strength of 180,000 psi
    • Large diameter, low-profile design
    • 9/16" head
    • Complete with washers
  • Flathead 9 Inch Clutch Disc, 1-1/8 Inch 26-Spline, GM, T-5 Transmission
    Flathead 9 Inch Clutch Disc, 1-1/8 Inch 26-Spline, GM, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 9" clutch discs for the flathead V8.

    Premium organic clutch friction disc for use with flathead Ford V8 to Camaro T-5 transmission conversions.

    Flathead 9 Inch Clutch Disc

    • 1-1/8 Inch 26-Spline 
    • Early Ford Flatheads
    • Camaro T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

     

  • Flathead 10 Inch Clutch Disc, 1-1/8 Inch 26-Spline, GM, T-5 Transmission
    Flathead 10 Inch Clutch Disc, 1-1/8 Inch 26-Spline, GM, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10" clutch discs for the flathead V8. They replace 10" OEM with a 11-5/8" bolt circle.

    These premium organic clutch friction discs are for use with flathead Ford V8 to Camaro T-5  transmission conversions.

    Flathead 10 Inch Clutch Disc

    • 1-1/8 Inch 26-Spline 
    • Early Ford Flatheads
    • Camaro T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

  • Flathead 10-1/2 Inch Clutch Disc, 1-1/8 Inch 26-Spline, GM, T-5 Transmission
    Flathead 10-1/2 Inch Clutch Disc, 1-1/8 Inch 26-Spline, GM, T-5 Transmission
    x
                

    It's getting harder to find flathead Ford clutch components. We can help you resolve this problem with our 10-1/2" clutch discs for the flathead V8.

    These premium organic clutch friction discs are for use with flathead Ford V8 to Camaro T-5  transmission conversions.

    Flathead 10-1/2 Inch Clutch Disc

    • 1-1/8 Inch 26-Spline 
    • Early Ford Flathead
    • Camaro T-5  transmission conversions

    T-5 and Adapter Tech Tips (Link)

    Warning: Not for use with 11" Ford Truck pressure plate.  Clearence of adapter may be required with pressure plates larger than 9".  Speedway pressure plate 91015635 is without weights and provides extra clearance.  T-5 transmissions may require drilling mount ears to 1/2".  

  • Ram 98769T Ford HDX Performance Clutch Set, 1-1/8 Inch-26 Spline
    Ram 98769T Ford HDX Performance Clutch Set, 1-1/8 Inch-26 Spline
    x
                

    The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. RAM HDX pressure plates are purpose built with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which is achieved with premium organic composite disc friction material. Also, HDX discs feature Ram's exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool.

    • HDX sets feature a heavy duty pressure plate with explosion resistant pressure ring, and a premium 8 spring clutch disc with HD facings. 
    • Release bearing and alignment tool are included where applicable
    • HDX sets are rated up to 450 RWHP
    • 1-1/8 Inch-26 Spline
    • Ford style applications

     

  • Ram 88764HDX GM Performance Clutch Set, 11 x 1-1/8 Inch-26
    Ram 88764HDX GM Performance Clutch Set, 11 x 1-1/8 Inch-26
    x
                

    The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. RAM HDX pressure plates are purpose built with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which is achieved with premium organic composite disc friction material. Also, HDX discs feature Ram's exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool.

    • HDX sets feature a heavy duty pressure plate with explosion resistant pressure ring, and a premium 8 spring clutch disc with HD facings. 
    • Release bearing and alignment tool are included where applicable
    • HDX sets are rated up to 450 RWHP
    • 11" Diaphragm x 1-1/8 Inch-26 Spline
    • GM style applications
  • Ram 88769HDT Ford Long HDX Performance Clutch Set, 1-1/8 Inch-26, 11 Inch Disc
    Ram 88769HDT Ford Long HDX Performance Clutch Set, 1-1/8 Inch-26, 11 Inch Disc
    x
                

    The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. RAM HDX pressure plates are purpose built with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which is achieved with premium organic composite disc friction material. Also, HDX discs feature Ram's exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool.

    • HDX sets feature a heavy duty pressure plate with explosion resistant pressure ring, and a premium 8 spring clutch disc with HD facings. 
    • Release bearing and alignment tool are included where applicable
    • HDX sets are rated up to 450 RWHP
    • 1-1/8"-26 Spline
    • 11" Disc Ford Long style
  • Ram 88761HDX GM Performance Clutch Set, 10-1/2 x 1-1/8 Inch-26
    Ram 88761HDX GM Performance Clutch Set, 10-1/2 x 1-1/8 Inch-26
    x
                

    The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. RAM HDX pressure plates are purpose built with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which is achieve with premium organic composite disc friction material. Also, HDX discs feature Ram's exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool.

    • HDX sets feature a heavy duty pressure plate with explosion resistant pressure ring, and a premium 8 spring clutch disc with HD facings. 
    • Release bearing and alignment tool are included where applicable
    • HDX sets are rated up to 450 RWHP
    • 10-1/2" x 1-1/8 Inch-26 Spline
    • GM style applications
  • 1986-Up Small Block Chevy Stock Car Racing Clutch Kit
    1986-Up Small Block Chevy Stock Car Racing Clutch Kit
    x
                This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

    Included:
    • Bellhousing
    • 153 Tooth Lightweight Flywheel
    • ARP Flywheel Bolts
    • 10-1/2" Lightweight Pressure Plate
    • ARP Pressure Plate Bolts
    • Solid Hub Organic Clutch Disc
    • Hydraulic Release Bearing
    • Extended Pilot Bearing
    • Clutch Alignment Tool
  • Quarter Master 108502 7-1/4 Inch Clutch Pressure Plate
    Quarter Master 108502 7-1/4 Inch Clutch Pressure Plate
    x
                

    Replacement pressure plate for Quarter Master 7.25" V-Drive racing clutch.

    • New Spec: 0.604"
    • Min. Spec: 0.598"
    • Max Warp Spec: 0.006"
  • Ram 88794HDT 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    New
    Ram 88794HDT 1986-00 Mustang 5.0L Clutch Set, 10.5 x 1-1/8-26
    x
                

    HDX Clutch sets are the performance upgrade for your daily driver/hot rod. Pressure plates feature increased clamp loads and Ram Clutches' 200 Series organic clutch disc use a premium organic facing material that greatly increases rotational structure.

    • Great driveability and performance up to 450 HP
    • 10.5 x 1-1/8-26
    • Smooth, chatter free operation
    • Premium organic composite disc friction material
    • Exclusive 8-spring hub assembly for added load capacity
    • Designed for 1986-00 Mustang 5.0L
    • Includes: Pressure plate, disc, release bearing, alignment tool

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Quarter Master 191300 Ford Clutch and Flywheel Combo
    Quarter Master 191300 Ford Clutch and Flywheel Combo
    x
                Here is the ultimate S/B Ford Street Stock clutch! The 10.4" solid hub organic disc, lightweight steel-faced aluminum pressure plate, and steel flywheel combine to provide quick-revving performance with excellent holding capacity.   
    • 157 tooth steel flywheel - 30.8 lbs
    • Fits 1-1/8" x 10 spline input
    • 10.4" Solid Hub Organic Friction Disc
    • Internal Balance Only
    • Lightweight aluminum pressure plate

    Quarter Master Engineering & Design (PDF)

    Note: For Race applications only - not intended for Street use.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Flathead 10 Inch Clutch Disc, 1-3/8 Inch 10-Spline
    Flathead 10 Inch Clutch Disc, 1-3/8 Inch 10-Spline
    x
                It's getting harder to find flathead Ford clutch components. We can  help you resolve this problem with our 10" clutch discs for the flathead V8. They replace 10" OEM with a 11-5/8"  bolt circle.

    These premium organic clutch friction discs are for use with flathead Ford V8 and work well with our long style pressure plate (part number 91015657).

    Flathead 10 Inch Clutch Disc

    • 1-3/8 Inch 10-Spline 
    • Early Ford Applications

    T-5 and Adapter Tech Tips (Link)

  • Chevy Lightweight Steel Flywheel, 153 Tooth, 2-Piece Main
    Chevy Lightweight Steel Flywheel, 153 Tooth, 2-Piece Main
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. For 1955-1985 internally balanced 153 tooth small block Chevy applications.

    • 16.8 lbs
    • Typically used with 10-1/2" Ram solid hub clutch disc 605-351 and pressure plate 605-401
    • Will also work with a Ram 605-301M sprung hub or 605-1021 6-pad clutch disc
  • Ram Clutches 1510-10 55-85 Chevy Light Billet Steel Flywheel-153 Tooth
    Ram Clutches 1510-10 55-85 Chevy Light Billet Steel Flywheel-153 Tooth
    x
                

    These Ram 10 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002902. 

  • Ram Clutches 1512-10 86-Up Chevy Light Steel Flywheel 153-Tooth Ex Bal
    Ram Clutches 1512-10 86-Up Chevy Light Steel Flywheel 153-Tooth Ex Bal
    x
                

    These Ram 11 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002906. 

  • Ram Clutches 1514-10 1986-UP Chevy Light Steel Flywheel 153-Tooth Intern Bal
    Ram Clutches 1514-10 1986-UP Chevy Light Steel Flywheel 153-Tooth Intern Bal
    x
                

    These Ram 10 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002906. 

  • 1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-26 Spline
    1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-26 Spline
    x
                

    These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.

    • Stronger, more agressive clutch than stock
    • Retains stock pedal feel
    • Perfect for mild engines

    Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 

Goto Previous PagePrevious Page
1 2 3 4