Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chrome billet aluminum" Page 1 of 3

  • Chrome Steel and Billet Aluminum Throttle Pedal
    Chrome Steel and Billet Aluminum Throttle Pedal
    x
                

    This Speedway throttle pedal features chrome plated arms, a splined shaft for easy indexing of throttle arm, and a spring loaded, satin finish, billet aluminum pedal with rubber inserts for added driving comfort.

    The arms can be swapped from side-to-side on this foot pedal.

  • QA1 Adjustable 11 Inch Coil-Over Shock Kit
    QA1 Adjustable 11 Inch Coil-Over Shock Kit
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Has 5/8" I.D. mounting eyes and includes 1/2" bushing. Sold as a pair.

    • Billet aluminum shock body
    • 5/8" centerless ground, hard chrome plated, solid piston rod
    • Deflective Disc Valving
    • 3-step sealing system
    • 18-position adjuster knob changes the rebound valving
    • Allows suspension control in one easy-to-reach location
    • 100% dyno tested and serialized
    • Revalveable and rebuildable by QA1 authorized service centers
    • 2-1/2" I.D. chrome-silicon spring
    • Guaranteed to stay within 2% of rate and length FOR LIFE

    Note: Shock lengths represent mounted length at ride height.

    Coil-Over Chart (Link)

    Coil-Over Mounting Guide (GIF)

  • Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    Single Groove Power Steering Pump Pulley, Billet Aluminum, Short Pump
    x
                

    Power steering pump pulley for use with short-style (1955-1968) water pumps. Available in plain billet only.

    • For use with our 91032908 power steering pump 
    • Use with 2-groove lower crank pulley when using P/S bracket 91667920
    • Pulley runs off outer groove of lower crank pulley
    • 5/8" shaft hole w/ key way
    • Chamfered on the back side to allow clearance on pumps
  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • 1932-48 Ford Flathead 3 Bolt Electronic Distributor
    1932-48 Ford Flathead 3 Bolt Electronic Distributor
    x
                Speedway Motors offers this billet aluminum electronic distributor for the fabulous '32-'41 Flathead Ford V8 with the 3-bolt mount. This distributor is a "ready-to-run" unit that does not require a control box. 

    We suggest a 12v coil 447-45001 (chrome) or 447-45011 (black) to be used with this distributor. We also suggest our spark plug wire set 910-64200.

    910-8353 Instructions (PDF)

  • Chrome Plated Billet Banjo Style Steering Wheel
    Chrome Plated Billet Banjo Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column.  Wheel has a 2" dish.  Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet Wings Style Steering Wheel
    Chrome Plated Billet Wings Style Steering Wheel
    x
                

    This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.

  • Chrome Plated Billet T-Style Steering Wheel
    Chrome Plated Billet T-Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet 4-Slot Style Steering Wheel
    Chrome Plated Billet 4-Slot Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design. 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column.  Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet Trinity Style Steering Wheel
    Chrome Plated Billet Trinity Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Chrome Plated Billet Boomerang Style Steering Wheel
    Chrome Plated Billet Boomerang Style Steering Wheel
    x
                This stylish 14 inch steering wheel features a half wrap, leather grip design, 2" dish, and chrome plated billet aluminum spokes. Wheel has a 9-bolt mounting pattern requiring a hub adapter to install on your GM style column. Hub adapter 910-5602 and horn button 910-5600 sold separately.
            
  • Speedway KSE Sprint Racing Wing Slider Kit
    Speedway KSE Sprint Racing Wing Slider Kit
    x
                Please view the product's page for more information
            
  • Small Block Chevy Outboard Drive Kits, Alternator
    Small Block Chevy Outboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Outboard mount for fat fendered cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • Small Block Chevy Outboard Drive Kits, Alternator & A/C
    Small Block Chevy Outboard Drive Kits, Alternator & A/C
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator, and a chrome A/C compressor.  

    Outboard mount for fat fendered cars.

    Alternator and A/C kits include dual groove pulleys.

    Note: S/B Chevy, short style water pump only.
  • Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    Lokar TL-1910 Chromed Billet Oval LED Tail Lights, 2-3/4 x 5-1/2 Inch
    x
                

    These beautiful LED tail lights are carved out of a solid billet of 6061-T6 aluminum and then chrome plated. They only protrude 3/16".

    • Bright LED lights for safety and function
    • Integrated design with 3 functions: tail, turn & brakes
    • Extremely bright LED's, generate virtually no heat, use little power and have long life
    • Fully assembled for easy installation
    • Detailed instructions with color coded wiring for easy installation
    • Oval style with smooth recessed lens and internal prism
    • Design matches other Lokar Oval style products
    • Stainless hardware and zinc plated mounting brackets

    Lokar LED Tail Light Installation Instructions (PDF)

  • Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in. 

    Includes 12550 chrome moly intermediate shaft, stud kit and +10# and -10# relief springs.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs
  • QA1 Adjustable 15.3 Inch Coil-Over Shock Kit
    QA1 Adjustable 15.3 Inch Coil-Over Shock Kit
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Has 5/8" I.D. mounting eyes and includes 1/2" bushing. Sold as a pair.

    Note: Shock lengths represent mounted length at ride height.

    Coil-Over Chart (Link)

    Coil-Over Mounting Guide (GIF)

  • Horn Button for Hub Adaptor 9105602
    Horn Button for Hub Adaptor 9105602
    x
                Complete the installation of your 9-bolt chrome plated billet steering wheel assembly with this chrome-plated aluminum horn button.
            
  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    Ididit 2402500040 Steering Column Ball Swivel Lower Mount, 2-1/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4250 Instructions (PDF)

  • QA1 Adjustable 14 Inch Coil-Over Shock Kit
    QA1 Adjustable 14 Inch Coil-Over Shock Kit
    x
                Please view the product's page for more information
            
  • Mounting Hub for 9-Bolt Steering Wheels
    Mounting Hub for 9-Bolt Steering Wheels
    x
                

    Complete the installation of your 9-bolt chrome plated billet steering wheel with this chrome-plated aluminum hub adapter (fits 1967-94 GM columns).

    Use horn button 9105600 (not included).

  • 8 Inch Small Block Chevy Harmonic Balancer Covers
    8 Inch Small Block Chevy Harmonic Balancer Covers
    x
                8" Harmonic balancer covers for Small Block Chevys. Available blue, black, red, chrome or billet.
            
  • Ididit 2400500040 Steering Column Ball Swivel Lower Mount, 1-3/4 Inch
    Ididit 2400500040 Steering Column Ball Swivel Lower Mount, 1-3/4 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4050 Instructions (PDF)

  • QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch
    QA1 US402 Adjustable Shock and Coilover Kit w/o Spring, 12 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 11-3/4" - 12-1/4" @ ride height
    • 14" extended, 10-1/8" compressed
    • Use 10" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • QA1 US602 Adjustable Shock and Coilover Kit w/o Spring, 15.3 Inch
    QA1 US602 Adjustable Shock and Coilover Kit w/o Spring, 15.3 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 15"-15-3/4" @ ride height
    • 18-3/4" extended, 12-1/2" compressed
    • Use 14" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • Ididit 2401500040 Steering Column Ball Swivel Lower Mount, 2 Inch
    Ididit 2401500040 Steering Column Ball Swivel Lower Mount, 2 Inch
    x
                

    Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.

    Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.

    446-4150 Instructions (PDF)

  • QA1 US502 Adjustable Shock and Coilover Kit w/o Spring, 14 Inch
    QA1 US502 Adjustable Shock and Coilover Kit w/o Spring, 14 Inch
    x
                

    These premium aluminum bodied shocks are not a revalved race shock - they were built specifically for street rods. QA1 shocks feature 18 easily adjustable rebound settings to fine tune your hot rod's ride. Comes with steel coilover sleeves for the shock eyes to fit 1/2" bolts or 5/8" bolts. Springs NOT included.

    • 13-3/4" - 14-1/4" @ ride height
    • 17" extended, 11-5/8" compressed
    • Use 12" spring
    • Width of Mount Bushings:  1.25"

    Note: Shock lengths represent approximate mounted length at ride height.

    Coil Over Mounting Guide (GIF)

    Coil Over Mount Illustration (Link)

  • Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1232C Instructions (PDF)

  • Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    Ididit 1130330020 Tilt Wheel Steering Column w/ Shift, 33 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1333C Instructions (PDF)

  • Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    Ididit 1130280020 Tilt Wheel Steering Column w/ Shift, 28 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1328C Instructions (PDF)

  • Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
    Ididit 1120280020 Tilt Wheel Steering Column, 28 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome steel finish

    Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1228C Instructions (PDF)

  • Ididit 1130300020 Tilt Wheel Steering Column w/ Shift, 30 Inch, Chrome
    Ididit 1130300020 Tilt Wheel Steering Column w/ Shift, 30 Inch, Chrome
    x
                Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
    • Self-canceling turn signals
    • 4-way flashers
    • Horn circuit
    • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
    • Chrome plated steel finish

    Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

    446-1330C Instructions (PDF)

  • Lokar TL-1911 Chromed Billet Oval LED Tail Lights, 3 x 6-1/2 Inch
    Lokar TL-1911 Chromed Billet Oval LED Tail Lights, 3 x 6-1/2 Inch
    x
                

    These beautiful LED tail lights are carved out of a solid billet of 6061-T6 aluminum and then chrome plated. They only protrude 3/16".

    • Bright LED lights for safety and function
    • Integrated design with 3 functions: tail, turn & brakes
    • Extremely bright LEDs, generate virtually no heat, use little power and have long life
    • Fully assembled for easy installation
    • Detailed instructions with color coded wiring for easy installation
    • Oval style with smooth recessed lens and internal prism
    • Design matches other Lokar Oval style products
    • Stainless hardware and zinc plated mounting brackets

    Lokar Oval LED Tail Light Installation Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3