Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy steel water pump" Page 1 of 3

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • 1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Upper Pulley, Short Water Pump
    x
                

    These upper pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.  Sitting flat on the workbench, the pulley is 2-3/4" high in the center at the water pump.

    • Upper pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 7-1/8" Diameter
    • Chrome plated finish

    Note:  These upper pulleys will not work with our lower pulley (91015424).  Use our lower pulley (91015422) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • 1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    1955-68 Small Block Chevy Single Groove Lower Pulley, Short Water Pump
    x
                

    These lower pulleys for 1955-68 short water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines. 

    • Lower pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Single groove  
    • 6-3/4" Diameter
    • Chrome plated finish

    Note: Use our upper pulley (91015421) to correspond for proper alignment with these lower pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

     

  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    GM Performance 19201330 Small Block Chevy ZZ4 350 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • Tuff Stuff 1449NA 1969-86 Small Block Chevy Economy Chrome Water Pump
    Tuff Stuff 1449NA 1969-86 Small Block Chevy Economy Chrome Water Pump
    x
                

    These 100% new steel water pumps are chrome plated and are perfect for your 1969-1986 small block Chevy "driver."

    910-15542 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.   

  • Small Block Chevy Short Heavy Duty Aluminum Water Pump
    Small Block Chevy Short Heavy Duty Aluminum Water Pump
    x
                This super heavy duty race water pump features additional casting designs for more strength and reinforcement, plus a 3/4" fan pilot shaft and super duty bearing. It has 1/2" NPT threaded outlets on both the top and side, plus a 3/16" steel rear plate. It weighs 7-3/4 lbs.
    • 3/4" fan snout
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Threaded for adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow and pressure

    910-15581 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Chevy Short Water Pump Bolt Kit, Stainless Steel
    Chevy Short Water Pump Bolt Kit, Stainless Steel
    x
                

    These stainless steel bolt kits will dress up your Small Block Chevy engine while giving it corrosion-resistant performance. Allen head.

    This includes:

    • 3 each 3/8-16 x 1 3/4 Stainless Steel Socket Head Cap Screw
    • 1 each 3/8-16 x 2 1/2 Stainless Steel Socket Head Cap Screw
    • 4 each 3/8 AN Stainless Steel Flat Washers
  • Stewart Components 32200 S/B Chevy Short Stage 3 Adjustable Water Pump
    Stewart Components 32200 S/B Chevy Short Stage 3 Adjustable Water Pump
    x
                

    These pumps are assembled with 356-T6 heat treated aluminum castings. Precision CNC machined components. The fan hubs are 1/2" thick and machined from billet steel. These pumps are preferred by many top engine builders for higher RPM applications.

    These stage 3 water pumps feature 1/2" thick steel fan hub with set screw for positive positioning and 356-T6 heat treated aluminum casting. The S/B Chevy pump has an extra rigid cam stop with a 3/8" adjusting screw. The extra material adjacent to the block mounting bolts allows drilling and tapping up to 1/2" NPT holes for external cooling lines on S/B Chevy. There is higher flow and pressure for better cooling as well as equal flow to right and left cylinder heads. The 3/4" bearings offer 5 times the strength of standard bearings. Precision impeller installed to exacting tolerances. One year manufacturers warranty.

    910-155 Instructions (pdf)

     

  • King Chrome Small Block Chevy 1969-86 Long Water Pump
    King Chrome Small Block Chevy 1969-86 Long Water Pump
    x
                

    1969-86 Small Block Chevy (SBC) King chrome long leg water pump from OEM castings. Polished to a higher standard and beautifully chrome plated. Built from NEW components.

    •  Drilled & tapped for factory accessories
    • 6-15/16" from block surface to face of pulley flange

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

     

  • Small Block Chevy Performance Aluminum Water Pump, Short
    Small Block Chevy Performance Aluminum Water Pump, Short
    x
                Each pump is manufactured from T6 aluminum and features an impeller with curved vanes for maximum flow, pressure and equal distribution to both sides of the block. It also features a unique seal assembly for leak proof operation. 
    • 3/4" shaft with 5/8" fan pilot snout
    • 1/2" NPT hole on passenger side (for heater hose) and on top (for bypass hose)
    • Stamped steel rear plate
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow rate and pressure rate
    • Weighs 6 lbs.
    • Does not have a set screw retaining the fan hub

    NOTE: This pump is designed for street use and is not to be run on a motor which exceeds 5,500 RPM. 

    910-15580 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • Black Upper Double Groove Water Pump Pulley, Chevy V8
    Black Upper Double Groove Water Pump Pulley, Chevy V8
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy V8 Dual Groove Short Water Pump Pulley
    • Satin black finish
    • Replaces GM # 3995642
    • 6" diameter
  • LSX/Vortec Water Pump, Cast Aluminum
    LSX/Vortec Water Pump, Cast Aluminum
    x
                

    Designed specifically for the GM LS Gen III/IV engines, these high flow aluminum pumps are engineered to deliver a faster, higher volume flow of water. Pressure-injected, aluminum alloy pump bodies significantly improve cooling for any street, high performance, or racing application. Featuring a precision cast-iron impeller design and pressure-balanced water passages, these "super pumps" equalize flow and minimize engine hot spots at any speed.

    • Fits 1997-2003 engines
    • 8-hole billet steel hub
    • Heavy-duty 0.750" shaft
    • Shielded-sealed roller ball bearings
  • LSX/Vortec Water Pump, Polished Aluminum
    LSX/Vortec Water Pump, Polished Aluminum
    x
                

    Designed specifically for the GM LS Gen III/IV engines, these high flow aluminum pumps are engineered to deliver a faster, higher volume flow of water. Pressure-injected, aluminum alloy pump bodies significantly improve cooling for any street, high performance, or racing application. Featuring a precision cast-iron impeller design and pressure-balanced water passages, these "super pumps" equalize flow and minimize engine hot spots at any speed.

    • Fits 1997-2003 engines
    • 8-hole billet steel hub
    • Heavy-duty 0.750" shaft
    • Shielded-sealed roller ball bearings
  • Tuff Stuff 1354NA 1955-68 S/B Chevy Economy Chrome Water Pump
    Tuff Stuff 1354NA 1955-68 S/B Chevy Economy Chrome Water Pump
    x
                

    These water pumps are chrome plated and are perfect for your 1955-68 small block Chevy "driver."

    • 3/4" NPT top port
    • 1/2" NPT side port

    1955-1968 Small Block Chevy Water Pump Installation Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.    

  • 1969-85 Small Block Chevy Single Groove Upper Pulley, Long Water Pump
    1969-85 Small Block Chevy Single Groove Upper Pulley, Long Water Pump
    x
                

    These upper pulleys for 1969-85 long water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.

    • Upper pulley
    • 1969-85 283-350 V8 small block Chevy engine
    • Long water pumps
    • Single groove  
    • 6-1/4" Diameter
    • Chrome plated finish

    Note:  Use our lower pulley (91015426) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

     

  • 1969-85 Small Block Chevy Single Groove Lower Pulley, Long Water Pump
    1969-85 Small Block Chevy Single Groove Lower Pulley, Long Water Pump
    x
                

    These lower crank pulleys for 1969-85 long water pumps feature a single groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.

    • Lower pulley
    • 1969-85 283-350 V8 small block Chevy engine
    • Long water pumps
    • Single groove  
    • 7" Diameter
    • Chrome plated finish

    Note:  Use our upper pulley (91015425) to correspond for proper alignment with these lower pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

     

  • 1969-85 Small Block Chevy Double Groove Upper Pulley, Long Water Pump
    1969-85 Small Block Chevy Double Groove Upper Pulley, Long Water Pump
    x
                

    These upper pulleys for 1969-85 long water pumps feature a double groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.

    • Upper pulley
    • 1969-85 283-350 V8 small block Chevy engine
    • Long water pumps
    • Double groove  
    • 6-1/4" Diameter
    • Chrome plated finish

    Note:  Use our lower pulley (91015428) to correspond for proper alignment with these upper pulleys.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

     

  • Chevy Long Water Pump Bolt Kit, Stainless Steel
    Chevy Long Water Pump Bolt Kit, Stainless Steel
    x
                These stainless steel bolt kits will dress up your Small Block Chevy engine while giving it corrosion-resistant performance. Allen head.
            
  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Short Water Pump Bolt Kit
    Small Block Chevy Short Water Pump Bolt Kit
    x
                A bolt kit for a S/B Chevy short water pump. All feature that unique King Chrome premium chrome plating. Fits Small Block Chevy (SBC).
            
  • 1955-68 Small Block Chevy Double Groove Lower Pulley, Short Water Pump
    1955-68 Small Block Chevy Double Groove Lower Pulley, Short Water Pump
    x
                

    These lower pulleys for 1955-68 short water pumps feature a double groove with a beautiful chrome finish.  They will work with 283-350 V8 small block Chevy engines.

    • Lower pulley
    • 1955-68 283-350 V8 small block Chevy engine
    • Short water pumps
    • Double groove  
    • 7-3/8" Diameter
    • Chrome plated finish

    Note:  These lower pulleys will not work with our upper pulley (91015421).  Use our upper pulley (91015423) to correspond for proper alignment with these lower pulleys.


     

  • Small Block Chevy Long Water Pump Bolt Kit
    Small Block Chevy Long Water Pump Bolt Kit
    x
                

    A bolt kit for a S/B Chevy long water pump. All feature that unique King Chrome premium chrome plating. Fits Small Block Chevy (SBC).

    These bolts are 2" long (under head) 2 1/4" overall with 1" threaded.

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1955-1968 Chevy Short Pump Double Groove Upper Pulley
    1955-1968 Chevy Short Pump Double Groove Upper Pulley
    x
                

    Chrome upper Small Block Chevy pulley for 1955-1968 short pumps.

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    New
    GM Performance 425 Horsepower ZZ383 Long Block, Small Block Chevy Engine
    x
                Please view the product's page for more information
            
  • Quick Change Cam Cover Kit, Plain
    Quick Change Cam Cover Kit, Plain
    x
                

    Quick change cam cover eliminates the need for dropping the oil pan when replacing timing chain or advancing camshaft. Fits small block Chevy with "long" style (1969-1986) water pump.

    Use of this cover with a "short" water pump typically causes clearance issues with the back of the pump. It can be used with a short pump, but the pump would need to be shimmed for clearance.

  • Small Block Chevy Chrome Alternator Base Brackets
    Small Block Chevy Chrome Alternator Base Brackets
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your generator/alternator. Bracket base attaches at #1 cylinder exhaust port and works in conjunction with slide bracket 720-9008.

    • Chrome plated steel
    • Requires slide bracket 720-9008
    • Mounts to driver side of engine
    • Not for use with stock exhaust manifolds
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Alternator Slide Bracket
    Small Block Chevy Alternator Slide Bracket
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your alternator. Slide bracket attaches at #1 cylinder exhaust port and works in conjunction with base bracket 720-9254.

    • Chrome plated steel
    • Requires base bracket 720-9254 & arm 910-67850
    • Mounts to driver side of engine
    • Not for use with original generators 
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • 1976-86 Small Block Chevy Alternator Bracket
    1976-86 Small Block Chevy Alternator Bracket
    x
                          Fits 1976-86 S/B Chevy V8's with long water pump. Chrome plated.           
            
  • Black Single Groove Power Steering Pulley, Chevy
    Black Single Groove Power Steering Pulley, Chevy
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy Single Groove Power Steer Pump Pulley
    • Stock"Shallow" variety
    • Keyway Type
    • Satin black finish
    • For use with short water pumps
  • Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole. Accepts stock GM Saginaw power steering pumps with attached reservoir.

    Available in chrome or black painted.

Goto Previous PagePrevious Page
1 2 3