Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy steel brackets" Page 1 of 11

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Chevy Steel Frame Mounts
    $29.99
    Chevy Steel Frame Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These frame brackets are designed to be used with our steel motor mounts 545-62515. Fits both Small Block and Big Block Chevy.

    Same as factory frame brackets from '74-'81 Camaro, '73-'88 Malibu/Monte Carlo/El Camino, '73-'79 Nova, and '76-'90 Impala/Caprice.

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Small Block Chevy Alternator Slide Bracket
    Small Block Chevy Alternator Slide Bracket
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your alternator. Slide bracket attaches at #1 cylinder exhaust port and works in conjunction with base bracket 720-9254.

    • Chrome plated steel
    • Requires base bracket 720-9254 & arm 910-67850
    • Mounts to driver side of engine
    • Not for use with original generators 
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Chrome Alternator Base Brackets
    Small Block Chevy Chrome Alternator Base Brackets
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your generator/alternator. Bracket base attaches at #1 cylinder exhaust port and works in conjunction with slide bracket 720-9008.

    • Chrome plated steel
    • Requires slide bracket 720-9008
    • Mounts to driver side of engine
    • Not for use with stock exhaust manifolds
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    Billet FM2222PC B/B Chevy Mid Mount Serpentine Conversion Kit Press-On
    x
                Please view the product's page for more information
            
  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2221PC BBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    Bolt-In 1947-54 1/2 Ton Chevy Pickup Triangulated Four Bar Rear Susp Kit
    x
                

    Build a firm foundation for your vintage 1/2 ton Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a complete '47-'54 Chevy pickup frame using only basic hand tools and a drill.

    This triangulated four bar rear suspension will greatly improve both the ride quality and handling of your Chevy.  

    • for 1/2 ton chassis
    • 60" wide 9” rearend housing with welded suspension brackets
    • Chromoly four bars with urethane bushings
    • Bolt-on frame brackets and shock crossmember
    • 11” steel-bodied coil-over shocks

    910-04754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown. Third member, axle shafts and rear disc brake kit are shown in the photo for reference only, but are not included as part of this kit and are available separately.

  • Speedway 1947-54 Chevy Truck 4-Link Rear Suspension Kit Minus Axle
    Speedway 1947-54 Chevy Truck 4-Link Rear Suspension Kit Minus Axle
    x
                

    Get a great rear suspension for your classic with this 1947-54 Chevy pickup truck triangulated 4 bar rear suspension kit. This precision engineered kit includes bolt-on frame brackets, weld-on axle brackets, tubular steel bars, and chromoly adjusters with urethane bushings. This triangulated four bar rear suspension will greatly improve both the ride quality and handling of your Chevy.

    • Allows the do-it-yourself rodder to use the rear end of their choice
    • Modern geometry and handling
    • Chromoly four bars with urethane bushings
    • Bolt-on frame brackets and shock crossmember

    910-047541 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown. Third member, axle shafts, coil-overs, and rear disc brake kit are shown in the photo for reference only, but are not included as part of this kit and are available separately. 

  • Bills Hot Rod Co. Small Block Chevy A/C and Alternator Brackets
    Bills Hot Rod Co. Small Block Chevy A/C and Alternator Brackets
    x
                

    Fabricated from mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Accepts Sanden or Sankyo 508 A/C unit and stock GM alternators and power steering pumps.

    For use with '55-'68 short-style water pumps only. Not for use with Vortec cylinder heads.

  • Moroso Chevy Steel Motor Mounts
    Moroso Chevy Steel Motor Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These engine brackets are designed to be used with our Steel Frame Mounts 545-62630. 

    • Replaces soft, OEM rubber motor mounts
    • Positive, solid mount eliminates engine rotation and torque loss
    • Prevents linkage binding
    • Fits both Small Block and Big Block Chevy

     

  • Stock GM Alternator Brackets
    From: $102.99
    Product Rating: 5.00 Stars
    Stock GM Alternator Brackets
    x
                

    For Small Block Chevy with short water pump. Fabricated from mild steel, with all stainless fasteners. Accepts stock GM alternator.

    Simple installation. Attaches to accessory bolt holes on front face of head. Available in black or chrome.

     S/B Chevy Alternator Bracket Illustration

  • Walker C-509-1 Cobra 1934-1935 Chevrolet Master Radiator
    Walker C-509-1 Cobra 1934-1935 Chevrolet Master Radiator
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. 

    Made to fit '34 Master and early '35 Master (which looks like the '34). Will not fit late '35 Master which looks like the '36 model and features a 2-piece (split) windshield, suicide doors, and a 113" wheelbase. Late '35 Masters should use the '36 radiator.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Built-in oil cooler for use with automatic transmissions

    Chevy Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Big Block Chevy Lower Alternator Bracket, Chrome
    Big Block Chevy Lower Alternator Bracket, Chrome
    x
                

    Chrome plated steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes.

    • Works with the short water pump
    • Will NOT work with Speedway T-Bucket frames (too narrow)
    • Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator
  • Big Block Chevy Lower Alternator Bracket, Plain
    Big Block Chevy Lower Alternator Bracket, Plain
    x
                

    Steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes.

    • Works with the short water pump
    • Will NOT work with Speedway T-Bucket frames (too narrow)
    • Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator
  • Bolt-In 1947-54 Chevy Pickup Center Chassis Crossmember
    Bolt-In 1947-54 Chevy Pickup Center Chassis Crossmember
    x
                

    Build a firm foundation for your vintage Chevy pickup without picking up a welder! This innovative line of chassis components from Speedway Motors allows the do-it-yourself rodder to assemble a frame using only basic hand tools and a drill.

    • Tubular steel bolt-together assembly – no welding required
    • Laser cut from 11-gauge steel plate
    • Bolt-in boxing plates add strength to frame

    910-64754 Instructions (PDF)

    NOTE: Finish will be plain steel, not powder coated as shown.

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Bills Hot Rod Co. Big Block Chevy A/C and Alternator Brackets
    Bills Hot Rod Co. Big Block Chevy A/C and Alternator Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts Sanden or Sankyo 508 A/C unit and stock GM Delco 10-SI (1970-1989 style) alternators. 

    • Designed for use with short water pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Available in chrome or black painted
  • Small Block Chevy Lower Alternator Bracket, Plain
    Small Block Chevy Lower Alternator Bracket, Plain
    x
                

    Mounts GM "Delco" style alternators beside oil pan at left front corner of your small block Chevy V8. Works with the short ('55-'68) water pump. Includes bracket and spacer.

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Polished Stainless Steel Chevy Motor Mounts
    Polished Stainless Steel Chevy Motor Mounts
    x
                Our polished stainless steel motor mounts for S/B and B/B Chevy engines include polyurethane bushings and trim-to-fit 1/4" steel weld-on frame brackets. Add a touch of class to your dream car. 
            
  • Bills Hot Rod Co. Big Block Chevy A/C Brackets
    Bills Hot Rod Co. Big Block Chevy A/C Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts Sanden or Sankyo 508 A/C compressor.

    • Designed for use with short water pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Available in chrome or black painted
  • Bills Hot Rod Co. Big Block Chevy Alternator Brackets
    Bills Hot Rod Co. Big Block Chevy Alternator Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts stock GM Delco 10-SI (1970-1989 style) alternators.

    • Designed for use with short water pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Available in chrome or black painted
  • 1932 Lo-Boy Roadster Frame Assembly
    1932 Lo-Boy Roadster Frame Assembly
    x
                Please view the product's page for more information
            
  • 1937-1938 Chevy LED Tail Light Assembly
    1937-1938 Chevy LED Tail Light Assembly
    x
                

    Use these brilliant polished stainless steel LED tail lights to upgrade your 1937-1938 Stovebolt or hang 'em on the back of a T-bucket for a different look! Choose left or right.

    • 45 super bright red LED's
    • Polycarbonate lens
    • Polished stainless steel housing
    • For 12V systems
    • Left-side taillight has licence plate light

    This taillight works best with a 1937-38 mount bracket. If you desire a universal-mount light, 91137013 pickup housings have an almost flat back for ease of mounting.

    1937-1938 Chevy Tail Light Installation Instructions (PDF)

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Steel Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Steel Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, solid steel rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .35" wide x 10-3/4" diameter solid steel rotors - black finish
    • Caliper has a 1/8" NPT inlet

    835-140151 Instructions (PDF)

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 2-Piston, Steel Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 2-Piston, Steel Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, solid steel rotors, 2-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Billet Dynapro two-piston calipers - black finish
    • Poly E brake pads
    • .35" wide x 10-3/4" diameter solid rotors - black finish
    • Caliper has a 1/8" NPT inlet

    835-140150 Instructions (PDF)

  • 1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    New
    1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    x
                Please view the product's page for more information
            
  • Bills Hot Rod Co. Sanden or Sankyo 508 AC Brackets
    Bills Hot Rod Co. Sanden or Sankyo 508 AC Brackets
    x
                

    For S/B Chevy with short water pump. Fabricated from mild steel, with all stainless fasteners. Accepts Sanden or Sankyo #508 air conditioner unit.

    Simple installation. Attaches to accessory bolt holes on front face of head. Available in black or chrome.

     

     S/B Chevy Alternator Bracket Illustration

  • 1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1937-1939 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31939 Instructions (PDF)

  • GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.5 Inch
    GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.5 Inch
    x
                

    You just bought your LS and plan on using the factory exhaust manifolds, but noticed they have odd shaped collector flanges. Now what? These flanges bolt to the factory factory manifold and allow for a smooth installation. Flanges are 3/8" thick.

    Specify driver or passenger side.

  • Small Block Chevy Lower Alternator Bracket, Chrome
    Small Block Chevy Lower Alternator Bracket, Chrome
    x
                

    Mounts GM "Delco" style alternators beside oil pan at left front corner of your small block Chevy V8. Works with the short ('55-'68) water pump. Includes bracket and spacer.

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Single Remote Oil Filter Bracket, Chevy Filter
    Single Remote Oil Filter Bracket, Chevy Filter
    x
                Aluminum remote oil filter bracket with horizontal hose inlet/outlet. Has 1/2" NPT female hose inlet/outlet threads. This oil filter relocator accepts Chevy filters with 13/16"-16 threads Use AC Delco PF35, PF932 or Fram HP4 filters. 

    Three items are needed for a remote oil filter assembly:

    1. Choose a remote oil filter bracket.
    2. Choose a remote bypass adapter to replace your oil filter.
    3. Choose a hose kit to connect the bypass adapter and oil filter bracket.
  • GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.25 Inch
    GM 5.3/6.0 Truck Exhaust Flanges, Mild Steel, 2.25 Inch
    x
                

    You just bought your LS and plan on using the factory exhaust manifolds, but noticed they have odd shaped collector flanges. Now what? These flanges bolt to the factory factory manifold and allow for a smooth installation. Flanges are 3/8" thick.

    Specify driver or passenger side.

  • Wilwood 140-11010 1955-1957 Chevy Front Disc Brake Kit
    Wilwood 140-11010 1955-1957 Chevy Front Disc Brake Kit
    x
                

    This heavy duty Wilwood brake kit is just the ticket for your '55, '56 or '57 Chevy car. Features 4-piston billet Dynalite calipers, aluminum hubs, 11-3/4" vented rotors and required brackets and hardware. Calipers have 1/8" NPT inlet. Works with 15" and larger wheels.

    Note: For stock 1955-1957 Chevy spindles ONLY - will not fit 2" drop aftermarket spindles.

    835-14011010 Instructions (PDF)

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, vented iron rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .810" wide x 10-3/4" diameter Ultralite HP 30 Vane rotors - plain finish
    • Caliper has a 1/8" NPT inlet

    835-140152 Instructions (PDF)

  • 1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1940-1948 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31948 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1976-86 Small Block Chevy Alternator Bracket
    1976-86 Small Block Chevy Alternator Bracket
    x
                          Fits 1976-86 S/B Chevy V8's with long water pump. Chrome plated.           
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 11