Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy side motor mounts" Page 1 of 8

  • LS1 Motor Mount Adapters
    $69.99
    Product Rating: 5.00 Stars
    LS1 Motor Mount Adapters
    x
                

    These billet aluminum adapters allow you to put an LS1 where a S/B Chevy would mount. They bolt to the sides of your LS1 and accept standard S/B Chevy mounts. Metric and Standard hardware included.

    • Constructed from .383" thick aluminum
    • LS1 bolt pattern is 4 3/8” horizontal and 3 1/16” vertical
    • Triangular bolt pattern for the standard SBC motor mount
    • Locates LS engine 1 3/16" forward from the original SBC placement

    Note: These motor mounts may require you to move your transmission mount forward in some applications.

    916-18016 Instructions (PDF)

  • Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    x
                

    Side-mount motor mounts are a more rugged mount design than the original front mounts found on your Tri-Five Chevy, plus they allow more room for front drive accessories. Our motor mount kit allows you to side-mount 1958-up S/B Chevy 283-400 c.i. V-8 engines into your 1955, 1956, or 1957 Chevy passenger car.  Will also work on 396-454 big block engines.

    Includes frame brackets, engine brackets, rubber mount cushions, hardware, and instructions.

    1955-1957 Chevy Bolt-In Motor Mount Installation Instructions

  • AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    x
                Please view the product's page for more information
            
  • Chevy Aluminum Side Engine Mounts, Polished
    Chevy Aluminum Side Engine Mounts, Polished
    x
                

    Universal fit motor mounts. Heat treated aluminum construction. Fits S/B, B/B, 90° V6 Chevy. 

    Use with cushion kit # 7209314.

  • Chevy Aluminum Side Engine Mounts, Plain
    Chevy Aluminum Side Engine Mounts, Plain
    x
                

    Universal fit motor mounts. Heat treated aluminum construction. Fits S/B, B/B, 90° V6 Chevy. 

    Use with cushion kit # 7209314.

  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • AFCO 1957 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1957 Chevy Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • 2 rows of 1.25" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • Side brackets are reverseable for mounting fore or aft of the core support

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1932 Ford Aluminum Radiator, Chevy Engine
    AFCO 1932 Ford Aluminum Radiator, Chevy Engine
    x
                Please view the product's page for more information
            
  • Small Block Chevy Steel Side Engine Mount Kit
    Small Block Chevy Steel Side Engine Mount Kit
    x
                

    Use these universal small block Chevy engine mounts to fit your high-horsepower motor to the desired chassis of your choice.  They are constructed of beefy .18" thick steel for safety and performance.

    • Small Block Chevy applications
    • Universal chassis applications
    • Sturdy steel construction
    • Hardware included
  • AFCO 1937 and 1939 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1937 and 1939 Chevy Aluminum Radiator, Chevy Engine
    x
                Please view the product's page for more information
            
  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1955-1957 Small Block Chevy Chassis Headers, AHC Coated
    1955-1957 Small Block Chevy Chassis Headers, AHC Coated
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors. These ceramic coated headers provide superior performance and durability.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

    NOTE:  These headers do not fit angle-plug heads. They do work with a "605"steering box.  They work with most an

  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • 1955-1957 Small Block Chevy Chassis Headers, Plain
    1955-1957 Small Block Chevy Chassis Headers, Plain
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

  • AFCO 1955-59 Chevy Truck Aluminum Radiator, Chevy Engine
    AFCO 1955-59 Chevy Truck Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1933-34 Ford Car Aluminum Radiator, Chevy Engine
    AFCO 1933-34 Ford Car Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • 17” Core Width
    • 3”Core Thickness
    • 27” Overall Height (from bottom of bottom tank to top of top tank)
    • 20.25" Overall Width
    • 5° Layback

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Powermaster 722 High Mount Alternator Bracket, Small Block Chevy
    Powermaster 722 High Mount Alternator Bracket, Small Block Chevy
    x
                

    This bracket mounts the alternator to the passenger side cylinder head area.  This setup does not interfere with other belt drive systems already in use. This is a replacement bracket for kit part #91068122.

    • Mounts alternator to the passenger side cylinder head
    • Does not interfere with other belt drive systems
    • Replacement bracket for #91068122
    • Aluminum
    • Hardware included
  • S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    x
                

    Mount a Chevy engine in almost any frame up to 39" wide. Heavy wall 1-3/4" tubing, MIG welded. Comes with ends for bolt-in or weld-in applications.

    • Maximum working width: 39"
    • Minimum working width: 21"
    • 5.50" center drop

    Use with 1964-1967 Chevy-style mounts 91018012 (rubber) or 91018015 (polyurethane).

  • 1955-1957 Small Block Chevy Chassis Headers, Chrome
    1955-1957 Small Block Chevy Chassis Headers, Chrome
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust c

  • 1955-1957 Small Block Chevy Chassis Headers, Stainless
    1955-1957 Small Block Chevy Chassis Headers, Stainless
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21".

    Dimension Chart (GIF)

    NOTE: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine i

  • AFCO 1938-1946 GM Truck Aluminum Radiator, Chevy Engine
    AFCO 1938-1946 GM Truck Aluminum Radiator, Chevy Engine
    x
                

    If you are still running a copper radiator in your truck, you don't know what you are missing. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    Fits 1938-1946 Chevrolet and GMC pickup trucks.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • Overall Height:  27"
    • Overall Width:  18"

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1949-54 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1949-54 Chevy Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Powermaster 801 High Mount Alternator Bracket, Small Block Chevy
    Powermaster 801 High Mount Alternator Bracket, Small Block Chevy
    x
                

    This bracket will attach to either side of the motor via the two bolts attaching the water pump. In most cases, this drive system will not interfere with any existing setup. This is a replacement bracket for kit #91068120.

    • Mounts to either side of the motor via the two bolts attaching the water pump
    • Does not interfere with existing belt drive systems
    • Replacement bracket for #91068120
    • Aluminum
    • Hardware included

     

  • Universal Bolt-Through Engine Mount Cushion Kit
    Universal Bolt-Through Engine Mount Cushion Kit
    x
                

    Connects engine mounts to frame adapters. Heavy duty rubber cushion absorbs vibrations so your mounts won't break. These universal body mounts are required on all motor installations.

    Complete with bolts, washers, and rubber cushions. Does both sides.

    Engine Mounting Illustration (GIF)

  • AFCO 1939-40 Deluxe, 1940-41 Ford Truck Aluminum Radiator, Chevy Engine
    AFCO 1939-40 Deluxe, 1940-41 Ford Truck Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Has 2 rows of 1.25" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Fits:

    • 1939-40 Ford Deluxe
    • 1940 Ford
    • 1940-41 Ford Truck

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Engine Mounts for Shipping Crate, Chevy Engine
    Engine Mounts for Shipping Crate, Chevy Engine
    x
                

    Use these side motor mounts with our engine shipping crates.  They are designed to securely bolt to Chevy engines.

    • For use with engine shipping case (9405108
    • Fits Chevy engines
  • Chevy to 1955-1959 Chevy Pickup Motor Mounts
    Chevy to 1955-1959 Chevy Pickup Motor Mounts
    x
                

    Chevy V8s into 1955-1959 Chevy pickup & panel trucks. Plates bolt in.

    One mount kit has enough brackets, cushions, bolts and hardware to do both sides of the engine.

    1955-1959 Chevy Motor Mount Installation Instructions (pdf)

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    x
                

    Classic Chevy owners will love these 396-502 big block V8 chassis headers for 1955-1957 cars. They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance. Requires aftermarket side engine mounts and a rear trans crossmember (rather than stock bellhousing mounts).

    • Mid-length design offers maximum ground clearance, even if car is lowered 4"
    • Works with automatic transmissions only
    • Designed to work with stock steering or 605 power steering box
    • Original bellhousing frame mounts must be removed
    • Will NOT work if engine is set forward more than 3/4" for firewall/HEI distributor clearance
    • Will NOT fit tall-deck (truck) blocks
    • Header Dimensions (GIF)

    Note: These headers will not work with manual transmissions due to clutch linkage issues.

  • Small Block Chevy Lower Alternator Bracket, Stainless
    Small Block Chevy Lower Alternator Bracket, Stainless
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket and spacers
    • Does NOT Include bolts
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1955-57 Chevy Engine Block Side Mount Kit
    1955-57 Chevy Engine Block Side Mount Kit
    x
                On your 1955-57 Chevy car, the front motor mounts are at the front of the block and the rear mount attaches to the bellhousing. This works fine for original use but makes it hard to swap in a different trannsmission or add belt driven accessories to the front of the engine. 

    Use with engine cushions 910-18012 and transmission crossmember 916-28910 listed below. No welding, but drilling required.

    720-4175 Instructions (PDF)

  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, AHC Ceramic Coated
    1955-57 Big Block Chevy 396-502 Chassis Headers, AHC Ceramic Coated
    x
                

    Classic Chevy owners will love these big block V8 chassis headers for 1955-1957 cars.  They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance.  The manufacturer says that they won't work with manual transmissions due to clutch linkage issues!  These headers are finished with our Armor Hot Coating.

    • Quality steel construction
    • Mid-length design offers maximum ground clearance, even if car is lowered 4"

     

  • Billet Specialties 14220 Tru Trac Serpentine Systems - B/B Chevy
    Billet Specialties 14220 Tru Trac Serpentine Systems - B/B Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Big Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    910-13222 Instructions (PDF)

  • KRC KIT16390000 Denso Alt Bracket-Idler Tensioner Basic Drive Kit SBC
    KRC KIT16390000 Denso Alt Bracket-Idler Tensioner Basic Drive Kit SBC
    x
                

    KRC's idler tensioner is a neccessity on dirt cars because elt slippage can occur on cars that exceed 7,000 RPM. They are also vital if you use a large or heavy fixed fan blade or a fan blade with a lot of pitch. These can potentially causes overheating faster wear. This occurs on both single drive belt and pulley systems with a power steering pump mounted on the front of the engine.

    This happens because the fan belt and pulleys are required to slow the fan. The belt stretches so it slips while braking, inducing heat into the belt. The belt will continue to stretch as the race goes on, causing engine temperature to slowly climb. To properly tension the belt to prevent slippage is with an idler or tensioner pulley mounted on the passenger side of the engine. This helps the engine run cooler and the belt tighter, allowing faster acceleration out of turns & harder braking on corners.

    • Designed for GM 602 & 604 Crate Engines
    • Works great with mechanical fans
    • Assembly contains:
      • Idler - Tensioner
      • Alternator Bracket
      • 3.5" 3-Rib Serpentine Aluminum Pulley
      • Goodyear Gatorback Belt
      • Hardware and Instructions
  • Powermaster 8-17926 Snug-Fit Chrome Alternator, 100 Amp
    Powermaster 8-17926 Snug-Fit Chrome Alternator, 100 Amp
    x
                

    This 100 amp PowerMaster 1-wire alternator mounts on the lower left front of your Small Block Chevy. This is a simple one-wire hook-up and includes the bracket and hardware, and pulley.

    100 Amp Alternator Installation Instructions (PDF)

  • Small Block Chevy Alternator Slide Bracket
    Small Block Chevy Alternator Slide Bracket
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your alternator. Slide bracket attaches at #1 cylinder exhaust port and works in conjunction with base bracket 720-9254.

    • Chrome plated steel
    • Requires base bracket 720-9254 & arm 910-67850
    • Mounts to driver side of engine
    • Not for use with original generators 
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Walker Z-AC495-1 Z-Series 37-39 Ford Radiator & Condenser-Chevy Engine
    Walker Z-AC495-1 Z-Series 37-39 Ford Radiator & Condenser-Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Use Walker Fan Shroud Style E

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • Walker Z-Ac498-1 Z-Series 33-34 Ford Radiator & Condenser-Chevy Engine
    Walker Z-Ac498-1 Z-Series 33-34 Ford Radiator & Condenser-Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Works with original, reproduction, steel or fiberglass grille shells
    • 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Use Walker Fan Shroud Style B

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance



  • Walker Z-Ac491-2 Z-Series 32 Ford Radiator & AC Condenser-Chevy Engine
    Walker Z-Ac491-2 Z-Series 32 Ford Radiator & AC Condenser-Chevy Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5 ... 8