Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy short pump brackets" Page 1 of 3

  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    Billet FM2121PC SBC Mid Mount Serpentine Conversion Kit, Keyway Shaft
    x
                Please view the product's page for more information
            
  • Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    Bills Hot Rod Co. Power Steering Pump Brackets for Small Block Chevy
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.

    • Mounts low on driver's side
    • Two positions for superior adjustability 
    • Works with short or long style water pumps
    • Use with GM Saginaw pumps with attached reservoir, "type 1" p.s. pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Choose black or chrome finish

    Power Steering Tech Questions/Tips (Link)

    Power Steering Application Tech Questions/Tips (Link)

  • Zips Small Block Chevy Water Pump Riser
    Zips Small Block Chevy Water Pump Riser
    x
                
    • Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
    • Raises the pump and mechanical fan 5" higher in the engine compartment
    • Provides mounting surfaces for an A/C compressor and alternator
    • Riser housing comes with brackets and hardware
    • Water pump not included (use Chevy 250 L6 water pump)

    910-2306 Instructions (PDF)

    Learn more about using different water pump accessories to best fit your application by reading our tech article.  SBC - Short vs Long Water Pump.

  • KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    KRC KIT16312015 Basic Serpentine Drive Kit-Crate Chevy Block Mt. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic kit
    • GM 602 & 604 Crate Engines
    • Assembly contains:
      • 7.2cc aluminum power steering pump
      • 4.2" aluminum power steering pulley
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Goodyear Gatorback belt
      • Hardware and detailed instructions

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.

    Cast Iron Pump Tech (PDF)

    Cast Iron Pump Installation Instructions (PDF)

    New Pump Tips (PDF)

    Serpentine Pulley Offset (PDF)

  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    Billet Specialties 13220 Tru Trac Serpentine Systems - Small Block Chevy
    x
                

    Billet Specialties Tru Trac serpentine systems for Small Block Chevy come complete with all attaching hardware and a comprehensive installation manual.

    • Polished 105 amp Powermaster 1-wire alternator
    • Cast finish Edelbrock reverse rotation water pump
    • Polished Sanden SD-7 compressor
    • Cast finish Maval power steering pump w/ AN fittings
    • All pulleys and brackets completely polished
    • Polished ARP 12-point stainless steel hardware
    • Goodyear Gatorback 6-rib serpentine belt

    Note: Requires the use of a remote power steering fluid reservoir. Vehicles that use front style motor mounts must be converted to side motor mounts when using the Tru Trac system.

    Small Block Chevy Serpentine System Installation Instructions (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • 1965-68 B/B Chevy Alternator Bracket
    1965-68 B/B Chevy Alternator Bracket
    x
                    For 1965-68 B/B Chevy with short water pump. Mounts alternator on driver's side.    
            
  • Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    Bills Hot Rod Co. Big Block Chevy Power Steering Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole. Accepts stock GM Saginaw power steering pumps with attached reservoir.

    Available in chrome or black painted.

  • Small Block Chevy Lower Alternator Bracket, Stainless
    Small Block Chevy Lower Alternator Bracket, Stainless
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket and spacers
    • Does NOT Include bolts
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    Billet FM2122PC S/B Chevy Mid Mount Serpentine Conversion Kit-Press-On
    x
                Please view the product's page for more information
            
  • Small Block Chevy Inboard Drive Kits, Alternator
    Small Block Chevy Inboard Drive Kits, Alternator
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator only kits include single groove pulleys.

    Note: S/B Chevy, short style water pump only.

  • Small Block Chevy Inboard Drive Kits, Alternator & AC
    Small Block Chevy Inboard Drive Kits, Alternator & AC
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. 

    Inboard (high) mount brackets for early cars.

    Alternator and A/C kits include dual groove pulleys.

    Bracket kit works with dual quad & 3-2 low rise intakes.

    Note: S/B Chevy, short style water pump only.

  • Big Block Chevy Power Steering Pump Bracket
    Big Block Chevy Power Steering Pump Bracket
    x
                This power steering pump bracket mounts a stock-style GM pump to a B/B   Chevy block. Must be used with a short style water pump. Mounts on the   lower left side. Bracket is zinc plated with threaded shaft. Requires   1970-82 GM pump with threaded shaft.
            
  • Small Block Chevy Alternator Slide Bracket
    Small Block Chevy Alternator Slide Bracket
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your alternator. Slide bracket attaches at #1 cylinder exhaust port and works in conjunction with base bracket 720-9254.

    • Chrome plated steel
    • Requires base bracket 720-9254 & arm 910-67850
    • Mounts to driver side of engine
    • Not for use with original generators 
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • Small Block Chevy Chrome Alternator Base Brackets
    Small Block Chevy Chrome Alternator Base Brackets
    x
                

    Late 1950's and early 1960's S/B Chevys had the generator attached to the left exhaust manifold. With headers installed, our brackets are needed to reattach your generator/alternator. Bracket base attaches at #1 cylinder exhaust port and works in conjunction with slide bracket 720-9008.

    • Chrome plated steel
    • Requires slide bracket 720-9008
    • Mounts to driver side of engine
    • Not for use with stock exhaust manifolds
    • For '55-'68 S/B Chevy w/short water pumps

    Alternator Bracket Illustration (GIF)

  • KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    KRC KIT16312610 Serpentine Drive Kit-S/B Chevy, Head Mt. w/o P.S. Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side cylinder head mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump

  • KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    KRC KIT16312615 Serpentine Drive Kit-S/B Chevy, Block Mt. w/o P.S Pump
    x
                

    KRC's basic kits are the perfect starting point for your GM 602 & 604 Crate Engines. Select the kit with the options that suit your application, then choose the appropriate accessory to complete your kit.

    • Complete basic crate engine kit
    • Designed for GM 602 & 604 Crate Engines
    • Assembly contains:
      • Aluminum driver side lower block mounted power steering pump bracket
      • Pro series pulley kit
      • KRC high performance water pump
      • Water pump spacers
      • Hardware and detailed instructions

    Serpentine Pulley Offset (PDF)

    Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.  

  • Block Mount Power Steering Pump Bracket for Short Water Pump
    Block Mount Power Steering Pump Bracket for Short Water Pump
    x
                These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
            
  • 1965-68 Small Block Chevy Alternator Brace
    1965-68 Small Block Chevy Alternator Brace
    x
                Fits 1965-68 S/B Chevy V8's with short water pump. Chrome plated.
            
  • Stock GM Alternator Brackets
    From: $102.99
    Product Rating: 5.00 Stars
    Stock GM Alternator Brackets
    x
                

    For Small Block Chevy with short water pump. Fabricated from mild steel, with all stainless fasteners. Accepts stock GM alternator.

    Simple installation. Attaches to accessory bolt holes on front face of head. Available in black or chrome.

     S/B Chevy Alternator Bracket Illustration

  • Small Block Chevy Inboard Alternator Bracket
    Small Block Chevy Inboard Alternator Bracket
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Inboard (high) mount brackets for early cars, meaning it will place the alternator up high between the intake manifold and valve cover. Mounts the alternator on the driver's side.


    Note: S/B Chevy, short style water pump only.
  • Bills Hot Rod Co. Small Block Chevy A/C and Alternator Brackets
    Bills Hot Rod Co. Small Block Chevy A/C and Alternator Brackets
    x
                

    Fabricated from mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Accepts Sanden or Sankyo 508 A/C unit and stock GM alternators and power steering pumps.

    For use with '55-'68 short-style water pumps only. Not for use with Vortec cylinder heads.

  • Small Block Chevy Lower Alternator Bracket, Chrome
    Small Block Chevy Lower Alternator Bracket, Chrome
    x
                

    Mounts GM "Delco" style alternators beside oil pan at left front corner of your small block Chevy V8. Works with the short ('55-'68) water pump. Includes bracket and spacer.

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • Black Upper Double Groove Water Pump Pulley, Chevy V8
    Black Upper Double Groove Water Pump Pulley, Chevy V8
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy V8 Dual Groove Short Water Pump Pulley
    • Satin black finish
    • Replaces GM # 3995642
    • 6" diameter
  • Small Block Chevy Upper Alternator Bracket, Chrome
    Small Block Chevy Upper Alternator Bracket, Chrome
    x
                

    Positions alternator just above the intake, between passenger side valve cover and water outlet. Designed to mount GM "Delco" alternators on S/B Chevy V8 using '55-'68 short style water pumps.

    Alternator Bracket Illustration (GIF)

    916-67905 Instructions (PDF)

  • Powermaster 8-722 Small Block Chevy 75 Amp Mini Alternator w/Serp-Belt Kit
    Powermaster 8-722 Small Block Chevy 75 Amp Mini Alternator w/Serp-Belt Kit
    x
                

    Powermaster provides all the electrical punch you need, while saving weight and space with these racing alternator kits. One-wire unit for small block Chevy using short pump only. Mounts on either side of engine. Cranks out 14.7 volts and 75 amps. Kit includes mini alternator, brackets, bolts, spacers, drive pulley and belt.

    • True 1-wire hookup with set voltage of 14.7
    • High output to weight ratio
    • Excellent idle output
    • Gold battery post
    • Operating Range: -40°C to 150°C
    • Max RPM: 18,000
    • Weight: 8.885 lbs.

    NOTE:  Mini alternators are NOT IMCA approved for Hobby Stock or Sport Mod Divisions.

  • Black Single Groove Power Steering Pulley, Chevy
    Black Single Groove Power Steering Pulley, Chevy
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy Single Groove Power Steer Pump Pulley
    • Stock"Shallow" variety
    • Keyway Type
    • Satin black finish
    • For use with short water pumps
  • Bills Hot Rod Co. Big Block Chevy A/C and Alternator Brackets
    Bills Hot Rod Co. Big Block Chevy A/C and Alternator Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts Sanden or Sankyo 508 A/C unit and stock GM Delco 10-SI (1970-1989 style) alternators. 

    • Designed for use with short water pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Available in chrome or black painted
  • Bills Hot Rod Co. Big Block Chevy A/C Brackets
    Bills Hot Rod Co. Big Block Chevy A/C Brackets
    x
                

    Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts Sanden or Sankyo 508 A/C compressor.

    • Designed for use with short water pumps
    • Works with stock steel or aluminum aftermarket pulleys
    • Available in chrome or black painted
  • Black Double Groove Power Steering Pulley, Chevy
    Black Double Groove Power Steering Pulley, Chevy
    x
                Finding stock brackets and v-belt pulleys in  serviceable condition has gotten very difficult over the years.  That's  why we're working to bring you brand new reproductions in a paintable  satin black finish.  No more trying to make chrome aftermarket pulleys  look at home under the hood of your restoration project!
    • Chevy V8 2-Groove Power Steering Pump Pulley
    • "Keyway" Type
    • Satin black finish
    • For use with short water pumps
Goto Previous PagePrevious Page
1 2 3