Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy pressure plate" Page 1 of 2

  • ARP Fasteners 130-2201 Chevy Pressure Plate Bolts
    ARP Fasteners 130-2201 Chevy Pressure Plate Bolts
    x
                

    The importance of pressure plate bolts in a racing or hi-performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed these special High Performance Series pressure plate bolts that are application specific to ensure the optimum grip length. 

    • Made from a premium grade chromoly
    • Hardened to a nominal tensile strength of 180,000 psi
    • Large diameter, low-profile design
    • 9/16" head
    • Complete with washers
  • 1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
    1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
    x
                This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

    Included:
    • Bellhousing
    • 153 Tooth Lightweight Flywheel
    • ARP Flywheel Bolts
    • 10-1/2" Lightweight Pressure Plate
    • ARP Pressure Plate Bolts
    • Solid Hub Organic Clutch Disc
    • Hydraulic Release Bearing
    • Extended Pilot Bearing
    • Clutch Alignment Tool
  • Speedway Chevy T-5 Transmission to Flathead Adapter Kit
    Speedway Chevy T-5 Transmission to Flathead Adapter Kit
    x
                

    Adapt GM/Chevy T-5 transmission to 1932-48 Ford or 1939-50 Mercury engines. Allows use of your early Ford clutch release shaft and fork.

    This Kit contains a Ford style throwout bearing that requires a Ford long style pressure plate (three finger). Such as Part #'s 9101565191015657, or 91015635

    Kit includes aluminum adapter, original Flathead style release bearing, throwout bearing return spring, adapter sleeves, and ball-bearing type pilot bearing.

    Installation Notes (PDF)

  • 1955-79 Chevy/GM Street Series Clutch Kit, 11 Inch w/ 1-1/8 Inch-10 Spline
    1955-79 Chevy/GM Street Series Clutch Kit, 11 Inch w/ 1-1/8 Inch-10 Spline
    x
                

    These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.

    • Stronger, more agressive clutch than stock
    • Retains stock pedal feel
    • Perfect for mild engines

    Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 

  • 1986-Up Small Block Chevy Stock Car Racing Clutch Kit
    1986-Up Small Block Chevy Stock Car Racing Clutch Kit
    x
                This stock car racing clutch package lets you order all the parts you need with one easy part number. 1-1/8"-10 spline disc. 

    Included:
    • Bellhousing
    • 153 Tooth Lightweight Flywheel
    • ARP Flywheel Bolts
    • 10-1/2" Lightweight Pressure Plate
    • ARP Pressure Plate Bolts
    • Solid Hub Organic Clutch Disc
    • Hydraulic Release Bearing
    • Extended Pilot Bearing
    • Clutch Alignment Tool
  • Ram Clutches 1510-10 55-85 Chevy Light Billet Steel Flywheel-153 Tooth
    Ram Clutches 1510-10 55-85 Chevy Light Billet Steel Flywheel-153 Tooth
    x
                

    These Ram 10 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002902. 

  • Chevy Lightweight Steel Flywheel, 153 Tooth, 2-Piece Main
    Chevy Lightweight Steel Flywheel, 153 Tooth, 2-Piece Main
    x
                

    Don't sacrifice your acceleration due to a heavy flywheel. For 1955-1985 internally balanced 153 tooth small block Chevy applications.

    • 16.8 lbs
    • Typically used with 10-1/2" Ram solid hub clutch disc 605-351 and pressure plate 605-401
    • Will also work with a Ram 605-301M sprung hub or 605-1021 6-pad clutch disc
  • Ram Clutches 1512-10 86-Up Chevy Light Steel Flywheel 153-Tooth Ex Bal
    Ram Clutches 1512-10 86-Up Chevy Light Steel Flywheel 153-Tooth Ex Bal
    x
                

    These Ram 11 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002906. 

  • Ram Clutches 1514-10 1986-UP Chevy Light Steel Flywheel 153-Tooth Intern Bal
    Ram Clutches 1514-10 1986-UP Chevy Light Steel Flywheel 153-Tooth Intern Bal
    x
                

    These Ram 10 lb. racing flywheels are made of billet steel, not a cast stock piece cut down. Will work with 10.5" B&B or diaphram style pressure plates. These flywheels MUST use a solid hub friction plate (sprung hubs will not clear).

    Note: This flywheel requires very short bolts for mounting, as it is very 'thin' in the center. Use ARP flexplate bolts # 101-2002906. 

  • 1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-26 Spline
    1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-26 Spline
    x
                

    These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.

    • Stronger, more agressive clutch than stock
    • Retains stock pedal feel
    • Perfect for mild engines

    Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 

  • 1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-10 Spline
    1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-10 Spline
    x
                

    These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.

    • Stronger, more agressive clutch than stock
    • Retains stock pedal feel
    • Perfect for mild engines

    Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 

  • 1955-79 Chevy/GM Street Series Clutch Kit, 11 Inch w/ 1-1/8 Inch-26 Spline
    1955-79 Chevy/GM Street Series Clutch Kit, 11 Inch w/ 1-1/8 Inch-26 Spline
    x
                

    These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.

    • Stronger, more agressive clutch than stock
    • Retains stock pedal feel
    • Perfect for mild engines

    Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 

  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • Ram 88760 Economy 10.5 Inch Clutch Combo, Chevy 1-1/8 Inch, 10 Spline
    Ram 88760 Economy 10.5 Inch Clutch Combo, Chevy 1-1/8 Inch, 10 Spline
    x
                

    This 10-1/2” clutch combo includes an organic sprung hub disc, pressure plate with 2300 lb. springs and manual release bearing.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-Spline
    Ram 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-Spline
    x
                

    It doesn’t get any lighter than this! This clutch combo gets you a 153 tooth steel flywheel, a solid hub organic disc and a billet steel ring pressure plate.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Ram 88761 Economy 10.5 Inch Clutch Combo, Chevy 1-5/32 Inch-26 Spline
    Ram 88761 Economy 10.5 Inch Clutch Combo, Chevy 1-5/32 Inch-26 Spline
    x
                

    This 10-1/2” clutch combo includes an organic sprung hub disc, pressure plate with 2300 lb. springs and manual release bearing.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

     

  • Speedway 10 1/2 Inch Chevy Clutch Assembly
    Speedway 10 1/2 Inch Chevy Clutch Assembly
    x
                Have you got the slippin' clutch blues? This lightweight 10-1⁄2" clutch assembly only weighs 39 lbs. and offers superior clamping pressure. The organic disc has the common 1-1⁄8" x 10 spline with a factory-style sprung hub and the flywheel is a lightweight 153 tooth piece for 2-piece rear main S/B Chevys.
            
  • Quarter Master 191100 Small Block Chevy Clutch & Flywheel Combo
    Quarter Master 191100 Small Block Chevy Clutch & Flywheel Combo
    x
                Here is the ultimate Small Block Chevy Street Stock clutch! The 10.4" solid hub organic disc, lightweight steel-faced aluminum pressure plate, and steel flywheel combine to provide quick-revving performance with excellent holding capacity.  
    • 153 tooth steel flywheel - 29.2 lbs
    • Fits 1-1/8" x 10 spline input, Pre-'86
    • 10.4" Solid Hub Organic Friction Disc
    • For Early 2 PC Main Seal Cranks

    Quarter Master Engineering & Design (PDF)

    Note: This clutch assembly is for Race applications only - not intended for Street use.

    Tech Tip:  When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up.  You should also replace the pilot bushing/bearing.

    Tech Tip:  To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer.  The amount of slippage this causes is worse than a night of racing.

  • 1949-1953 Flathead Steel Flywheel
    $249.99
    $299.99
    Product Rating: 3.00 Stars
    1949-1953 Flathead Steel Flywheel
    x
                

    It's getting harder to find usable Flathead flywheels and clutch components. We offer you these new steel flywheels for later 1949-53 engines. Weighs 24 lbs.

    Will accept 10", 10.5" and 11" Ford (Long-style) and 10.5" Borg & Beck Diaphram pressure plates. Use 7/16" Chevy flywheel bolts to mount to crankshaft. 

    T-5 and Adapter Tech Tips (Link)

  • Professional Products Cyclone Small Block Chevy Intake Manifold
    Professional Products Cyclone Small Block Chevy Intake Manifold
    x
                

    The Power+Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957-’95 Small Block Chevy non-EGR engines. Includes special adapter bushings to fit ’87-’95 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. This is our most popular manifold and is showing up on many performance street machines and street rods.

    RPM range is idle to 5500.  Availabe in plain or show polished.

    NOTES: Manifold includes adaptor bushings to also fit 1987-1995 iron or aluminum heads.  Polished intakes have EGR ports with block plates.

     

     

  • Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    Flo-Tek 102505 Assembled S/B Chevy Aluminum Heads, Straight Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head with a standard exhaust port design.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Five angle valve job
    • Bronze guides
    • Straight plug
    • 3/8" screw-in studs and guide plates
    • Port for temperature probe
    • Works well with most flat tappet street cams

    Flow Numbers:

    • Valve Lift     .400"     .500"     .600"
    • Intake           206       237       244   
    • Exhaust        165       177       187
  • Deluxe Hi-Volume Small Block Chevy Oil Pump
    Deluxe Hi-Volume Small Block Chevy Oil Pump
    x
                

    This oil pump has all it's components hand picked and fit to make it the best. The nickel body and end plate have been machined to balance the pressure at all rpm's which also reduces cavitation and increases longevity. Includes three pressure springs and a steel oil pump driveshaft sleeve.

    For Small Block Chevy V-8. Use 5/8" pick-up tube.

  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • 1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 10.4 Inch w/ 1-1/8-10 Spline
    1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 10.4 Inch w/ 1-1/8-10 Spline
    x
                

    HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.

    For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation.

  • 1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 10.4 Inch w/ 1-1/8-26 Spline
    1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 10.4 Inch w/ 1-1/8-26 Spline
    x
                

    HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.

    For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation.

  • 1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 11 Inch w/ 1-1/8-10 Spline
    1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 11 Inch w/ 1-1/8-10 Spline
    x
                

    HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.

    For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation.

  • 1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 11 Inch w/ 1-1/8-26 Spline
    1955-79 Chevy/GM HP Series Street/Strip Clutch Set, 11 Inch w/ 1-1/8-26 Spline
    x
                

    HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.

    For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation.

  • Fram HP4 High Performance Racing Oil Filter, Chevy
    Fram HP4 High Performance Racing Oil Filter, Chevy
    x
                

    Fram Racing oil filters have a heavy-duty steel body construction to resist high pressure surges and external impact. Rated at 10 GPM with a maximum 200 psi operating pressure.

    The HP4 is the common Chevy replacement and will work with both our remote oil filter brackets and be a stock OEM filter replacement for Chevy applications.

    • 13/16"-16 thread pitch
    • Low-restriction racing media designed for high oil flow
    • Spiral-shaped center tube to provide protection against collapse
    • Heavy gauge steel tapping plate to withstand high pressure flexing
    • Screen-over bypass valve to provide additional protection against larger contaminants
    • Relief valve developed uniquely for high oil flow racing conditions
  • Chevy 1955-1985 Aluminum 153 Tooth Flywheel
    Chevy 1955-1985 Aluminum 153 Tooth Flywheel
    x
                

    By installing a lightweight aluminum flywheel, you automatically bolt on up to 15 horsepower to the wheels. Your engine will reach higher RPMs quicker, due to lighter rotating mass.

    • Manufactured from 6061-T6 billet aluminum
    • Can be used with any type of clutch friction material
    • Locked locating dowel pins
    • SFI approved
    • Works with 10-1/2" (10.4") Diaphragm or Borg & Beck pressure plates
    • Weighs 10.84 lbs
    • 12 7/8" in diameter
  • Edelbrock 2901 Victor Jr Sportsman 2V Chevy Small Block Manifold
    Edelbrock 2901 Victor Jr Sportsman 2V Chevy Small Block Manifold
    x
                

    Designed for competition 262-400 c.i. S/B Chevys used in all forms of racing, the Victor Jr. intake manifolds incorporate Edelbrock's extensive knowledge in induction technology. Designed for the 2 bbl racer, providing outstanding performance from 3500 to 7000 RPM. The runners are sized especially for the 2 bbl racing engines for the ultimate combination of torque/horsepower and fuel distribution. 

    An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a 4-corner coolant flowpath if desired. Other features include dual distributor clamp locations and port exits sized to match Chevy cast-iron Bowtie cylinder heads.  Accepts standard restrictor plates and carb adaptors.

    • Extra material added for port matching and customizing
    • Water crossovers drilled and tapped for temp senders/bypass holes
    • Right front has relief for dry sump "pressure in" lines

    Victor Jr. Sportsman 2V Intake Manifold Installation Instructions (PDF)

  • Speedway Small Block Chevy Extra Strength Pushrods, 5/16 Inch
    Speedway Small Block Chevy Extra Strength Pushrods, 5/16 Inch
    x
                

    Made from C1010 material and heat treated. Has 25% more column strength than stock pushrods. Black finish, 5/16" diameter and .075" wall with drilled, welded balls. Can be used with guide plates. Use for spring pressures up to 400 lbs.

    Available in stock length (7.794"), .100" longer (7.894") and .150" longer (7.944"). Set of 16.

  • Three Chrome 9 Super 7   Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    Three Chrome 9 Super 7 Carbs, 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three chrome plated carbs, the plain finish aluminum intake, 4" chrome air cleaners, linkage kit, chrome fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carbure

  • Small Block Chevy Short Heavy Duty Aluminum Water Pump
    Small Block Chevy Short Heavy Duty Aluminum Water Pump
    x
                This super heavy duty race water pump features additional casting designs for more strength and reinforcement, plus a 3/4" fan pilot shaft and super duty bearing. It has 1/2" NPT threaded outlets on both the top and side, plus a 3/16" steel rear plate. It weighs 7-3/4 lbs.
    • 3/4" fan snout
    • Extra thick fan hub
    • 3/4" ultra duty bearings
    • Threaded for adjustable cam stop
    • State of the art aluminum castings
    • Equal flow to both cylinder banks
    • Precision impeller
    • Higher flow and pressure

    910-15581 Instructions (PDF)

    Learn how to choose the correct water pump for your application by reading our tech article.  SBC - Short vs Long Water Pump.  

  • MSD 8360 Chevy V8 with Internal Module Distributor
    MSD 8360 Chevy V8 with Internal Module Distributor
    x
                Please view the product's page for more information
            
  • Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    Flo-Tek 101505 Assembled Small Block Chevy Aluminum Heads, Angle Plug
    x
                

    You don't sacrifice quality for a low price - get both with a set of Flo-Tek aluminum cylinder heads. These Chevy aluminum heads are loaded with high end features like bronze valve guides, Multi angle valve job, and 3/8" screw-in rocker studs with guideplates. These are a pre-1986 design small block Chevy cylinder head.

    Heads are sold each.

    • 180cc intake runners
    • 62cc exhaust runners
    • 64cc combustion chambers
    • 2.02" and 1.60" stainless steel valves
    • High performance springs for .550" lift
    • Compatible with most flat tappet camshafts
    • Multi angle valve job
    • Bronze guides
    • 3/8" screw-in studs and guide plates
  • MSD 85551 Chevy Billet Distributor
    MSD 85551 Chevy Billet Distributor
    x
                

    You can't go wrong with the best selling MSD Billet Distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application.

    Fits Small Block or Big Block Chevy V8.

    Instruction Sheet for 547-5551 (pdf) 

  • MSD 85561 Chevy Billet Distributor with Slip Collar
    MSD 85561 Chevy Billet Distributor with Slip Collar
    x
                Please view the product's page for more information
            
  • MSD 8356 Small Block Chevy Dual Pickup Distributor
    MSD 8356 Small Block Chevy Dual Pickup Distributor
    x
                Please view the product's page for more information
            
  • Classic Instruments NO63GS G-Stock Gauge Cluster Set, 63-65 Chevy Nova
    Classic Instruments NO63GS G-Stock Gauge Cluster Set, 63-65 Chevy Nova
    x
                Classic Instruments '63-'65 Nova Package gauge sets  add a cluster of modern precision to your dash. Classic used their  simple goal of perfection to design this upgraded Nova gauge package to  retain the simple and pleasing looks of your first-generation Chevy  II/Nova. The set features electronic programmable speedometer, a tach,  and a quad cluster programmed for stock fuel sender, water temperature,  oil pressure, and volt gauges. Integrated turn signals, halo high-beam  indicators, pulse signal generators, and oval shaped lenses are included  to mount into your stock Nova bezel. Straightforward, simple, and made  in America, Classic Instruments '63-'65 Nova Package gauge sets are the  perfect choice for your classic car. 
    • Black & Green "G-Stock" face design
    • For 63-65 Chevy II Nova
    • Set includes speedo, tach, quad, pre assemblied bracketry, pre wired, t/s, high beam indicators built in
    • Standard GM sender pack included
    • Fuel level gauge pre-programmed 0-30 ohm to allow stock fuel tank sender to be used
    • No fuel sender included
    • Outer chrome face bezel- and metal defuser plate not included / must reuse original or purchase reproduction
  • Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    x
                

    Melling Select Series oil pumps are engineered to give you superior oiling for your high performance engine. 5/8" pickup required.

    • Steel billet gears with drive gear pinned to shaft
    • CNC machined housing and cover plate
    • Coated for wear and corrosion resistance
    • 5/8" inlet

    Available in standard volume or high-volume, which has 25% more volume.

Goto Previous PagePrevious Page
1 2