Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy power conversion kit" Page 1 of 2

  • 1955-57 Chevy Power Steering Centerlink Conversion
    1955-57 Chevy Power Steering Centerlink Conversion
    x
                So your car has the original power steering which is a valve on the end of the centerlink. Problem is they never did work right and made switching to a newer steering box a pain. To fix your problem you just unscrew the original power steering valve off the centerlink, screw this gizmo back on and now you can add a new 605 style power steering box and still use your original power steering centerlink. Neat huh.
            
  • 1955-57 Chevy Power Steering Conversion Kit
    1955-57 Chevy Power Steering Conversion Kit
    x
                

    Included in this kit is a new 500 series power steering box, new centerlink, new pitman and idler arm. Modification of the original steering column is required. Use 910-32460 (1955-56) or 910-32462 (1957) to convert the stock column for use with this kit. This is a straight bolt-on conversion when using our Ididit columns. 

    The top splines on the steering box are 3/4"-30.

    910-32570 Instructions (PDF)

  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    x
                

    These Speedway Mustang IFS kits for 1940-46 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1940-1946 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Heidts CX102  1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    Heidts CX102 1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    x
                Please view the product's page for more information
            
  • PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
    PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    Ignitor Points Eliminator Installation Instructions (PDF)

  • Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    Speedway 1949-54 Chevy Car Brake Pedal/Master/Booster Assembly
    x
                

    Use this great conversion kit to make your old Chevy stop safely and reliably when converted over to an automatic transmission application. Use in conjunction with front disc brake conversion 910-1954 and rear drum brakes.

    • Direct bolt in for 1949-54 Chevy cars
    • Corvette-style dual reservoir master cylinder
    • 7" dual diaphragm booster
    • Black powder coat and gold zinc finish
    • For disc/drum applications
    • Modification to stock brake lines required
    • For automatic transmission application only

    Works well when used with 1949-54 Chevy car front disc brake conversion kit 910-1954.

  • Shortened Reverse Pitman Arm for Lowered 1947-59 Chevy Truck w/PS
    New
    Shortened Reverse Pitman Arm for Lowered 1947-59 Chevy Truck w/PS
    x
                

    These shortened pitman arms are designed for use with lowered 1947-59 Chevy Trucks that have our 910-32132 or 910-32134 Power Steering Kit Conversion.

    • Shortened reverse pitman arm
    • For lowered 47-59 Chevy Pickups
    • Use with 91032132 or 91032134 power steering kits
  • 1963-66 Chevy Pickup Brake Power Booster Kit
    1963-66 Chevy Pickup Brake Power Booster Kit
    x
                

    Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 8" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1955-56 Chevy Power Steering Column Conversion
    1955-56 Chevy Power Steering Column Conversion
    x
                

    This kit allows you to run your original automatic column with a GM 500, 600, or 605 series conversion power steering box. Features an improved shift lever design and added clearance at the firewall

    Includes new tube, shaft, and floor plate. Accepts 3/4" DD rag joint.

    910-32460 Instructions (PDF)

  • 1957 Chevy Power Steering Column Conversion
    1957 Chevy Power Steering Column Conversion
    x
                

    This kit allows you to run your original automatic column with a GM 500, 600, or 605 series conversion power steering box. Features an improved shift lever design and added clearance at the firewall

    Includes new tube, shaft, and floor plate. Accepts 3/4" DD rag joint (at right).

    This column is 3 1/2" shorter than stock. The overall housing length from the top of the turn signal housin down to the end of the column housing is 29 1/8".  

    910-32462 Instructions (PDF)

  • Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • PerTronix 1144A Ignitor Points Eliminator Kit, 1962-74 Chevy 4 Cyl.
    PerTronix 1144A Ignitor Points Eliminator Kit, 1962-74 Chevy 4 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1144 Instructions (PDF)

  • Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • PerTronix 1168LS Ignitor Points Eliminator Kit, 1939-62 GM 6 Cyl.
    PerTronix 1168LS Ignitor Points Eliminator Kit, 1939-62 GM 6 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1168 Instructions (PDF)

  • Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    x
                

    Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.

    1. This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
    2. Designed for use with S/B Chevy 265-400 c.i. V-8.
    3. Must use chassis headers and a stock type pan sump for clearance.
    4. Steering U-joint 910-32255 is required (17mm).                                                   

    910-32246 Instructions (PDF)                                     &n

  • PerTronix 1183 Ignitor Points Eliminator Kit, 1931-58 GM 8 Cyl.
    PerTronix 1183 Ignitor Points Eliminator Kit, 1931-58 GM 8 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1183 Instructions (PDF)

  • PerTronix 1162A Ignitor Points Eliminator Kit, 1963-74 GM 6 Cyl.
    PerTronix 1162A Ignitor Points Eliminator Kit, 1963-74 GM 6 Cyl.
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    447-1162 Instructions (PDF)

  • 1955-57 Chevy Upper Cross Shaft Kit with Poly Bushings
    1955-57 Chevy Upper Cross Shaft Kit with Poly Bushings
    x
                

    Here we have new forged steel inner shaft kits that have polyurethane bushings rather than OEM rubber type. They will give you a higher performance ride and handle better than OEM rubber bushings. They also are offset an additional two degrees to compliment radial tires and power steering. Recommended when using 500 series power steering or a 605 conversion.

    Sold per pair. 

  • 1955-57 Chevy Lower Cross Shaft Kit with Poly Bushings
    1955-57 Chevy Lower Cross Shaft Kit with Poly Bushings
    x
                

    Here we have new forged steel inner shaft kits that have polyurethane bushings rather than OEM rubber type. They will give you a higher performance ride and handle better than OEM rubber bushings. They also are offset an additional two degrees to compliment radial tires and power steering. Recommended when using 500 series power steering or a 605 conversion.

    Sold per pair. 

  • Atomic EFI Throttle Body Master Kit
    $1,999.99
    $2,428.99
    Atomic EFI Throttle Body Master Kit
    x
                

    Install Saturday Morning, Make the Cruise Saturday Night with the Atomic Master kit. The Atomic EFI outshines the competition in ease of installation and performance! The MSD annular ring injection design produces an air/fuel charge with much better mixture as well as an even distribution among the cylinders that the competition cannot match. Better AFRs equal better idle quality, better starting, and better overall drivability throughout the rpm range. You and your engine will be glad when you Go Atomic.

    This is the complete kit for anyone planning to convert from a carburetor to Atomic EFI. You get the Throttle Body, Power Module (with Wide Band O2 sensor), Handheld Controller, and the Standard Fuel Kit for up to 525hp (at the crank).

    • Bolts to standard 4 barrel intake manifold
    • 8 wire connection installation
    • Replaces standard square bore carburetor
    • Controls ignition timing
    • Integrated ECU and sensors
    • Single fuel line
    • Self-Tuning
    • No Laptop required
    • 5472900 Atomic EFI TBI Instructions (PDF)
  • Atomic EFI Throttle Body Injection, Basic Kit
    $1,913.99
    $2,125.99
    Atomic EFI Throttle Body Injection, Basic Kit
    x
                

    Install Saturday Morning, Make the Cruise Saturday Night with the Atomic Basic kit. The Atomic EFI outshines the competition in ease of installation and performance! The MSD annular ring injection design produces an air/fuel charge with much better mixture as well as an even distribution among the cylinders that the competition cannot match. Better AFRs equal better idle quality, better starting, and better overall drivability throughout the rpm range. You and your engine will be glad when you Go Atomic.

    If your vehicle already has an electric fuel pump with a return line in place, you might not need to replace it. If this situation fits your car, you may want to consider this Basic Throttle Body Kit which comes with the Throttle Body, Power Module (with Wide Band O2 sensor), and Handheld Controller.

    • Bolts to standard 4 barrel intake manifold
    • 8 wire connection installation
    • Replaces standard square bore carburetor
    • Controls ignition timing
    • Integrated ECU and sensors
    • Single fuel line
    • Self-Tuning
    • No Laptop required
    • 5472910 Atomic EFI TBI Instructions (PDF)
  • Heidts Universal 56-1/2 Econo Crossmember
    Heidts Universal 56-1/2 Econo Crossmember
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2