Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy power box" Page 1 of 5

  • 1958-64 Chevy Power Steering Conversion Kit
    1958-64 Chevy Power Steering Conversion Kit
    x
                

    You get a new 500 series power steering box, new centerlink, new pitman and idler arm. This is a straight bolt-in conversion, although '58-'60 cars need to order the 910-32582 idler arm adapter. Steering box uses inverted flare fittings, 11/16" fine on the pressure side and 5/8" fine thread on the return side. Has a 3/4" 30-spline input shaft.

    Note:  Some applications require slight modification to the radiator tank to clear the steering box.

    1958-1964 Chevy Power Steering Conversion Installation Instructions 

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Small Block Chevy Power Steering Pump Bracket
    Small Block Chevy Power Steering Pump Bracket
    x
                

    This power steering pump bracket mounts a stock-style GM pump to a S/B Chevy block. Must be used with a short style water pump. Mounts on the lower left side. Bracket is zinc plated with threaded shaft. Designed to work with a '70-'82 GM pump that has a threaded pulley shaft, not a press-on style.

    Works with bolt-on or press-on pulleys with a mount spacing of 3.75". Due to the variety of pulley configurations, it is likely that you will have to space the pump/bracket for belt alignment.

    Note: This will NOT work when used on early 1970's Chevelle/Camaro chassis with a steering box.

  • 1955-64 Chevy Power Steering Hose Kit
    1955-64 Chevy Power Steering Hose Kit
    x
                

    Rubber power steering hose kit for 500, 600, & 605 series power steering boxes. Our power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. Return hose will normally need to be cut to length. 

    • 11/16"-18 inverted flare fine (pressure fitting)
    • 5/8"-18 inverted flare fine (return fitting)
    Note:  Power Steering Hose Kit for Small Blocks Only
  • American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

  • 1955-1957 Chevy Power Steering Box
    1955-1957 Chevy Power Steering Box
    x
                

    This new 500 Series power steering box for 1955-1957 Chevy cars is just the ticket to update your ride. Uses rotary valve technology to give you a superior road feel and driver feedback eliminating leaky, sloppy steering! The 500 Series is truly the best of its kind. It is the only box on the market today manufactured with a one piece housing (no welding), all new parts, uses original pitman arm, and has a 14:1 ratio.

     

    • 3/4"-30 input spline
    • Steering ratio is 14:1
    • Easy replacement for GM 605 box
    • Input shaft is 3/4”-30 spline (the same as the 605 box)
    • Sector shaft is 1” 36-4 tapered spline, the same as the original 1955-64 pitman shaft
    • Pressure fitting is 7/16" tube (11/16"-18 inverted flare port)
    • Return fitting is 3/8" tube (5/8"-18 inverted flare port) 

     

    910-32505 Instructions (PDF)

  • 1955-57 Chevy Power Steering Centerlink Conversion
    1955-57 Chevy Power Steering Centerlink Conversion
    x
                So your car has the original power steering which is a valve on the end of the centerlink. Problem is they never did work right and made switching to a newer steering box a pain. To fix your problem you just unscrew the original power steering valve off the centerlink, screw this gizmo back on and now you can add a new 605 style power steering box and still use your original power steering centerlink. Neat huh.
            
  • Speedway Adjustable Small Block Chevy IMCA Headers
    Speedway Adjustable Small Block Chevy IMCA Headers
    x
                

    Get your Modified breathing better and making maximum power for less money with Speedway adjustable IMCA headers. The stepped header design has adjustable-length primaries to allow for power tuning and variances in engine and foot box location. Adjustable pipe length allows you to shorten headers to work better on longer tracks, or leave pipes long for optimum performance on short tracks.

    • Quality construction with plain steel finish
    • All the features of more expensive headers, without the high price tag
    • Adjustable-length primary pipes for performance tuning
    • Pipe length can be adjusted for foot box and engine location
    • Fits IMCA Modifieds with a S/B Chevy standard exhaust port pattern
    • Includes gaskets and header bolts
    • 60-degree turnout on driver's side
    • 90-degree turnout on passenger side

    Header Dimension Chart

  • 1968-1972 GM Midsize Pitman Arm
    1968-1972 GM Midsize Pitman Arm
    x
                Brand new 1968-1972 GM midsize pitman arms

    Fits the following "4-bolt top" applications:
    • Sweet and 800 Series GM box
    • Big Spline" GM power 700 series Saginaw box
    • Big Spline" GM power 600 series Delphi box
    Fits drag links from:
    • 1968-72 Chevy Chevelle, El Camino, Malibu, & Monte Carlo
    • 1968-72 Buick Century, Luxus, Regal, Skylark, & Special (rwd)
    • 1966-72 Oldsmobile Cutlass, F85, Vista Cruiser, 4-4-2, & Calais (rwd)
    • 1964-72 Pontiac GTO, Lemans, Grand Am, Grand Lemans, Tempest, & T37
  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • American Autowire 500481 1955-59 Chevy Pick-up Wiring Harness
    American Autowire 500481 1955-59 Chevy Pick-up Wiring Harness
    x
                

    The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore.These harnesses plug into many of the original switches and connectors, but include:

    • modern fuse panel
    • ignition switch
    • headlight switch
    • dimmer switch
    • connectors for tilt columns
    • alternators
    • dome lights
    • head and tail lights, etc.

    Everything is color coded and instructions are included - it's a painless process. For 12 Volt upgrades.

  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    1955-57 Big Block Chevy 396-502 Chassis Headers, Plain Steel
    x
                

    Classic Chevy owners will love these 396-502 big block V8 chassis headers for 1955-1957 cars. They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance. Requires aftermarket side engine mounts and a rear trans crossmember (rather than stock bellhousing mounts).

    • Mid-length design offers maximum ground clearance, even if car is lowered 4"
    • Works with automatic transmissions only
    • Designed to work with stock steering or 605 power steering box
    • Original bellhousing frame mounts must be removed
    • Will NOT work if engine is set forward more than 3/4" for firewall/HEI distributor clearance
    • Will NOT fit tall-deck (truck) blocks
    • Header Dimensions (GIF)

    Note: These headers will not work with manual transmissions due to clutch linkage issues.

  • Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    x
                

    These Speedway Mustang IFS kits for 1940-46 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1940-1946 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get

  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • 1955-57 Chevy Power Steering Conversion Kit
    1955-57 Chevy Power Steering Conversion Kit
    x
                

    Included in this kit is a new 500 series power steering box, new centerlink, new pitman and idler arm. Modification of the original steering column is required. Use 910-32460 (1955-56) or 910-32462 (1957) to convert the stock column for use with this kit. This is a straight bolt-on conversion when using our Ididit columns. 

    The top splines on the steering box are 3/4"-30.

    910-32570 Instructions (PDF)

  • 1958-64 Chevy Power Steering Centerlink Conversion
    1958-64 Chevy Power Steering Centerlink Conversion
    x
                So your car has the original power steering which is a valve on the end of the centerlink. Problem is they never did work right and made switching to a newer steering box a pain. To fix your problem you just unscrew the original power steering valve off the centerlink, screw this gizmo back on and now you can add a newer style power steering box and still use your original power steering centerlink. Neat huh.
            
  • Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    Unisteer 8010400-01 1955-57 Chevy Power Rack & Pinion
    x
                

    Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.

    1. This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
    2. Designed for use with S/B Chevy 265-400 c.i. V-8.
    3. Must use chassis headers and a stock type pan sump for clearance.
    4. Steering U-joint 910-32255 is required (17mm).                                                   

    910-32246 Instructions (PDF)                                     &n

  • MSD 8106 Pro Mag Electronic Points Box
    MSD 8106 Pro Mag Electronic Points Box
    x
                

    Designed with sprint cars in mind, this MSD Pro Mag unit offers light weight and incredible power. The compact housing also sits an inch lower for improved clearance of the fuel injections plus features a band clamp mount for easier timing adjustments. 

    The electronic points box is the brain of the Pro Mag. It controls the spark duration and the unique full-power firing sequence of the Mag. The energy from the generator is controlled with Field Effect Transistor (FET) technology which is far superior to mags still using points as a trigger source.

  • 1955-1957 Small Block Chevy Chassis Headers, AHC Coated
    1955-1957 Small Block Chevy Chassis Headers, AHC Coated
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors. These ceramic coated headers provide superior performance and durability.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

    NOTE:  These headers do not fit angle-plug heads. They do work with a "605"steering box.  They work with most an

  • 1955-59 Chevy Truck Power Steering Kit
    1955-59 Chevy Truck Power Steering Kit
    x
                

    This kit lets you install a 1969-87 Chevy 2WD power steering box with a 13/16"-36 spline input shaft in your 1955-59 Chevy pickup. Included are the pitman arm, upper steering arm, drag link, intermediate steering shaft to connect to an aftermarket coulumn or modified stock column, and all hardware. Welding required.

    These kits come with spacers and mounting tabs that are welded to the frame of the pickup to mount the steering box. The original steering column will require alteration and must be welded to the collapsible shaft included in the kit.

    910-32134 Instructions (PDF)

  • 1947-54 Chevy Truck Power Steering Kit
    1947-54 Chevy Truck Power Steering Kit
    x
                

    This kit lets you install a 1969-87 Chevy 2WD power steering box with a 13/16"-36 spline input shaft in your 1947-54 Chevy pickup. Included are the pitman arm, steering arm, drag link, collapsible steering shaft and hardware. Welding required.

    These kits come with spacers and mounting tabs that are welded to the frame of the pickup to mount the steering box. The original steering column will require alteration and must be welded to the collapsible shaft included in the kit.

    910-32132 Instructions (PDF)

  • 1955-1957 Small Block Chevy Chassis Headers, Plain
    1955-1957 Small Block Chevy Chassis Headers, Plain
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

  • 1955-56 Chevy Power Steering Column Conversion
    1955-56 Chevy Power Steering Column Conversion
    x
                

    This kit allows you to run your original automatic column with a GM 500, 600, or 605 series conversion power steering box. Features an improved shift lever design and added clearance at the firewall

    Includes new tube, shaft, and floor plate. Accepts 3/4" DD rag joint.

    910-32460 Instructions (PDF)

  • 1957 Chevy Power Steering Column Conversion
    1957 Chevy Power Steering Column Conversion
    x
                

    This kit allows you to run your original automatic column with a GM 500, 600, or 605 series conversion power steering box. Features an improved shift lever design and added clearance at the firewall

    Includes new tube, shaft, and floor plate. Accepts 3/4" DD rag joint (at right).

    This column is 3 1/2" shorter than stock. The overall housing length from the top of the turn signal housin down to the end of the column housing is 29 1/8".  

    910-32462 Instructions (PDF)

  • Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Hilborn 327C8NA Race Saver Mega Power Small Block Chevy 305 Fuel Injector
    New
    Hilborn 327C8NA Race Saver Mega Power Small Block Chevy 305 Fuel Injector
    x
                Please view the product's page for more information
            
  • Small Block Chevy Low Mount Alternator Bracket, Chrome
    Small Block Chevy Low Mount Alternator Bracket, Chrome
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1955-1957 Small Block Chevy Chassis Headers, Chrome
    1955-1957 Small Block Chevy Chassis Headers, Chrome
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21". 

      Dimension Chart (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust c

  • Small Block Chevy Low Mount Alternator Bracket, Plain
    Small Block Chevy Low Mount Alternator Bracket, Plain
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket, bolts and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket, bolts and spacers
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

  • 1955-57 Big Block Chevy 396-502 Chassis Headers, AHC Ceramic Coated
    1955-57 Big Block Chevy 396-502 Chassis Headers, AHC Ceramic Coated
    x
                

    Classic Chevy owners will love these big block V8 chassis headers for 1955-1957 cars.  They have 34"-36" primary tubes for lots of power, but they're tucked close to the body for maximum ground clearance.  The manufacturer says that they won't work with manual transmissions due to clutch linkage issues!  These headers are finished with our Armor Hot Coating.

    • Quality steel construction
    • Mid-length design offers maximum ground clearance, even if car is lowered 4"

     

  • Painless 20110 1966-1967 Chevy II/Nova 21 Circuit Wiring Harness
    Painless 20110 1966-1967 Chevy II/Nova 21 Circuit Wiring Harness
    x
                

    One thing to never forget - the wiring in your muscle car is forty years old and updating to modern and safe components is easy. These Painless Wiring harnesses feature many pre-wired connections and are color coded to make installation a snap. Instructions included.

    This 21 circuit customizable Chevy II/Nova harness has many of the factory connectors already installed on the harness out of the box. Including: the headlight connectors & switch, fuel gauge connnector, dimmer switch, brake switch, heater switch, blower resistor, wiper switch, backup switch, horn, dash light sockets, and warning light sockets. This harness is split into three sections (engine, dome light, & rear) for easy installation and troubleshooting. You'll also find in this kit a harness for the factory air, a high output alternator pigtail with the connector installed, two door jam switches, 12 instrument panel light bulbs, eight harness mounting clamps, a custom Painless mounting plate for the fuse block, and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.

    1966-1967 Chevy II Nova Wiring Instructions (PDF)

  • 1955-1957 Small Block Chevy Chassis Headers, Stainless
    1955-1957 Small Block Chevy Chassis Headers, Stainless
    x
                

    These Speedway headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 S/B Chevy V8s and has 1-5/8" primary tubes with 2-1/2" collectors.

    • Mid-length design offers maximum ground clearance
    • Designed to work with stock or 605 power steering box
    • Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference)
    • Will work with side engine mounts with engine in stock location
    • Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4)
    • Does not work with stock clutch linkage
    • (Please use the chart below to help with dimensions.) Drivers side A dimension is 3-1/2" up by the head and 5-5/8" at the collector, B dimension is 15", and C dimension is 21".  Passenger side A dimension is 4" at the head and 6-5/8" at the collector, B is 15", and C is 21".

    Dimension Chart (GIF)

    NOTE: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine i

  • Small Block Chevy Lower Alternator Bracket, Stainless
    Small Block Chevy Lower Alternator Bracket, Stainless
    x
                

    These low mount alternator brackets mount common Delco alternators below the frost plug at the left front corner (driver's side) of your small block Chevy using bolt holes next to the timing cover. They are ideal for custom builds, street rods, and tube chassis cars that do not have power steering and work with short ('55-'68 S/B Chevy) water pumps. These brackets will support a standard full-size GM alternator which is sold separately.  Includes bracket and spacers. 

    • Mounts common Delco alternators below frost plug
    • Left front corner (driver's side) of engine
    • Bolt holes next to the timing cover
    • Includes bracket and spacers
    • Does NOT Include bolts
    • For:
      • small block Chevy
      • 1955-1968 short water pumps

    Note: Watch for steering box clearance!

    Alternator Bracket Illustration (GIF)

Goto Previous PagePrevious Page
1 2 3 4 5