Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy polished manifold" Page 1 of 1

  • Professional Products Cyclone Small Block Chevy Intake Manifold
    Professional Products Cyclone Small Block Chevy Intake Manifold
    x
                

    The Power+Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957-’95 Small Block Chevy non-EGR engines. Includes special adapter bushings to fit ’87-’95 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. This is our most popular manifold and is showing up on many performance street machines and street rods.

    RPM range is idle to 5500.  Availabe in plain or show polished.

    NOTES: Manifold includes adaptor bushings to also fit 1987-1995 iron or aluminum heads.  Polished intakes have EGR ports with block plates.

     

     

  • Power+Plus Hurricane Small Block Chevy Vortec 1996-Up Manifold
    Power+Plus Hurricane Small Block Chevy Vortec 1996-Up Manifold
    x
                

    No other performance intake manifold on the market is available with all the features and benefits found in the Power+Plus High Performance Racing Manifold.  These 360° manifolds feature dual distributor hold downs for Chevy, four corner water outlets, and line of sight port configuration.  They also have extended port dividers, thermostat recess, and an accessory bracket boss and tapped hole.  There is an air gap under the front water crossover for extra cooling and an extra tapped water port. 

    These manifolds have permanent mold castings for accurate port placement, tighter grain castings, and less porosity.  They have nitrous bosses, measure 5.12" from carb base to bottom of manifold, and are available in satin finish or polished (the area under the intake runners is not polished).  Available plain or polished. 

    910-11295 Instructions (PDF) 

  • Tru-Ram   Small Block Chevy Exhaust Manifolds, Polished Stainless
    Tru-Ram Small Block Chevy Exhaust Manifolds, Polished Stainless
    x
                The hobby was amazed by the design, quality and performance of our Small Block Chevy cast iron Tru-Ram® exhaust manifolds. Little did everyone know 'Speedy' Bill had more up his sleeve. These investment cast stainless steel ram horn manifolds feature a fully polished, show-quality finish. Enjoy the performance of tube-headers with the nostalgic look of the ram horn, along with the low maitenance characteristics that stainless steel provides!
    • Provides a tight-fit to minimize steering and clearance issues
    • Same performance as tube headers with classic ram horn styling
    • Offers a distinctive look
    • Fits most round port SBC cylinder heads 
    • Works with most straight or angle plug heads
    • 2-1/2" collector size
    • Includes stainless mounting hardware and gaskets
  • Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish
    Edelbrock 27014 Performer EPS Chevy Intake Manifold-Endurashine Finish
    x
                

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it produces power from off-idle to 5500 rpm.

    Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the standard Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum street performance gains.

    325-27014 Instructions (PDF)

  • Tru-Ram   Big Block Chevy Exhaust Manifolds, Polished
    Tru-Ram Big Block Chevy Exhaust Manifolds, Polished
    x
                

    Tru-Ram® Exhaust Manifolds allow you to enjoy the nostalgic look of factory BBC style manifolds, without sacrificing any performance. Investment cast from durable stainless steel material, these exhaust manifolds will be a low maitenance, high-performance addition to any Big Block Chevy-powered vehicle. Features a fully polished, show-quality finish. 

    • High-performance tubular design
    • Smooth internal transitions perform like shorty headers
    • Tightest fit to block available
    • Added clearance for steering shaft
    • Round 1-7/8" primary tubes with large 3" collector outlet
    • Standard 3 bolt collector pattern 
    • Includes stainless mounting hardware and gaskets

    930-0306 Dimensions (GIF)

  • Weiand 7151P 396-502 B/B Chevy Blower Intake Manifold, Polished
    Weiand 7151P 396-502 B/B Chevy Blower Intake Manifold, Polished
    x
                

    If you already have a blower and drive, we offer just the intake. Adapt 6-71/8-71 superchargers to Big Block Chevy. Cast aluminum, they feature an integral pop-off valve and utilize stock-type thermostats and housings.

    • Rear Mounted Pop Off Plate (Included)
    • Standard deck only
    • Boost Gauge port

     

  • Tru-Ram   LS1 Exhaust Manifolds, Polished
    Tru-Ram LS1 Exhaust Manifolds, Polished
    x
                Tru-Ram® Exhaust Manifolds allow you to enjoy the look of factory LS style manifolds, without the hassle of dealing with unsightly rust and corrosion. Investment cast from durable stainless steel material, these exhaust manifolds will be a low maitenance, high-performance addition to any LS-powered vehicle. Features a fully polished, show quality finish. 
    • Tucked-in shape hugs block contour 
    • Smooth internal transitions perform like shorty headers
    • Collector angle is optimized for maximum frame rail clearance on any application 
    • Round 1-3/4" primary tubes
    • Large 3" collector outlet
    • Standard 3 bolt collector pattern
    • Includes stainless mounting hardware and gaskets
  • Professional Products Crosswind Small Block Chevy Intake Manifold
    Professional Products Crosswind Small Block Chevy Intake Manifold
    x
                

    If you are running a maximum effort S/B Chevy V8, then this is the intake for you! The Professional Products Crosswind manifold is a high performance dual plane, 180° manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. The unique design isolates the plenum from the heat generated by your engine, which will give your engine a cooler air-fuel mixture and make more horsepower.

    • RPM range is 1500-6500
    • Available plain or show polished
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Accepts late model waterneck, A/C, alternator, and HEI

    Fits 1957-1986 heads and includes adapters for use on 1987-1995 small block heads.

  • Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    Power+Plus Typhoon Small Block Chevy 1957-95 Intake Manifold
    x
                

    If you are running a little more motor, then this is the intake for you! The Professional Products Typhoon manifold is a high performance dual plane, 180° street manifold designed to be used with Holley, Carter AFB, or Edelbrock square flange carbs. For 1957-86 S/B Chevy and will fit 1987-95 heads with supplied adapters.

    • RPM range is 1500-6500
    • Available plain or show polished
    • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
    • Cast-in nitrous bosses
    • Water outlets at all four corners
    • Dual distributor hold-downs
    • Provisions to add an oil fill tube
    • Accepts late model waterneck, A/C, alternator, and HEI

    910-11265 Dyno Sheet (PDF)

    910-11265 Instructions (PDF) 

  • Weiand 7136P 1955-1986 S/B Chevy Blower Intake Manifold, Polished
    Weiand 7136P 1955-1986 S/B Chevy Blower Intake Manifold, Polished
    x
                If you already have a blower and drive, we offer just the intake. Adapt 6-71 superchargers to Small Block Chevy. Cast aluminum, they feature an integral pop-off valve and utilize stock-type thermostats and housings.
            
  • Professional Products Cyclone Big Block Chevy 396-454 Intake Manifold
    Professional Products Cyclone Big Block Chevy 396-454 Intake Manifold
    x
                The Power+Plus Cyclone Manifold is a direct replacement manifold for the stock manifold on Chevy big block engines with general duty oval port heads. This dual plane intake will accept either a Quadra-Jet or square flange carb (with supplied adapter plate). Also features nitrous bosses cast in for use with direct port systems. RPM range is idle to 6000.  Available plain, polished or chrome. This product comes with the adapter/cover plate for the OEM choke assembly to bolt to.  It also has the adapter/cover plate gasket and two allen head chrome cap screws for attachment.

    910-11270 Instructions (PDF) 

  • Big Block Chevy Street Tunnel Ram Kit, Polished Scoop
    Big Block Chevy Street Tunnel Ram Kit, Polished Scoop
    x
                

    Oh baby, this would look cool on your car! This complete B/B Chevrolet  Street Tunnel Ram Kit features the  Edelbrock 2-O manifold designed for use on 396-502 c.i.d. big-block Chevy V8s with large oval-port heads (1975 and earlier). Ideal for lightweight applications such as T-buckets or pro-street cars where low-end torque is not a prime factor. Especially suited to engines using slightly modified or aftermarket cylinder heads (9.5:1 or more compression is advised). Optimum power range is 3500-7500 rpm.

    Includes plain unpolished manifold, two 600 cfm manual choke Edelbrock Perfromer carburetors, polished gasser style scoop with filters, and linkage. Not for the faint of heart!


  • Edelbrock 27164 Performer EPS Vortec Chevy Intake Manifold-Endurashine
    Edelbrock 27164 Performer EPS Vortec Chevy Intake Manifold-Endurashine
    x
                

    Now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance over other low-rise dual plane manifolds. The runner design is "tuned" for peak torque around 3500 rpm on a 350-inch engine and produces power from off- idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft/lbs. of torque from 3000 to 4500 rpm for more performance where you need it most.

    Match with a dependable Edelbrock square-bore carburetor for maximum street performance gains. Edelbrock recommends a 500-650 CFM model.

    325-27164 Instructions (PDF)

  • Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-75014 Instructions (PDF)

  • Edelbrock 71014 Performer RPM Endurashine Intake Manifold, S/B Chevy
    Edelbrock 71014 Performer RPM Endurashine Intake Manifold, S/B Chevy
    x
                Please view the product's page for more information
            
  • Edelbrock Performer Air-Gap Intake Manifold, Small Block V8, Endurashine
    Edelbrock Performer Air-Gap Intake Manifold, Small Block V8, Endurashine
    x
                

    This award-winning design incorporates the same race-winning technology that's been used on Edelbrock's Victor Series competition intakes for years. Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance.  These new Performer Air-Gap manifolds are ideal for street performance from idle-to-5500 rpm.

    The open air-gap separates the runners from the hot lifter-valley cover, resulting in a cooler, denser charge, meaning more power and better throttle response throughout the power band.

    • Chevrolet 262-400 Small-Block V8
    • Dual plane design
    • Idle - 5500 RPM
    • Ideal choice for street rods and street machines
    • For 1987-95 cast iron heads with canted center bolt holes
    • No provision for exhaust heated chokes or exhaust crossover
    • Fits spread-bore or square-bore carburetors
    • Will not fit under stock Corvette hood
    • Available with endurashine finish

    Note: Be sure to include new gaskets with this intake.  Depending on your head application, we recommend choosing from our two suggestions.

    325-26014 Instructions (PDF)

  • Professional Products 52031 Power Plus Hurricane 57-95 SB Chevy Intake
    Professional Products 52031 Power Plus Hurricane 57-95 SB Chevy Intake
    x
                

    No other performance intake manifold on the market is available with all the features and benefits found in the Power+Plus High Performance Racing Manifold.  These 360° manifolds feature dual distributor hold downs for Chevy, four corner water outlets, and line of sight port configuration. They also have extended port dividers, thermostat recess, and an accessory bracket boss and tapped hole. There is an air gap under the front water crossover for extra cooling and an extra tapped water port. 

    These manifolds have permanent mold castings for accurate port placement, tighter grain castings, and less porosity. They have nitrous bosses, measure 5.12" from carb base to bottom of manifold, and are available in satin finish or polished (the area under the intake runners is not polished). RPM range is 3000-7500 RPM.

    Dyno Chart (PDF)

    910-11280 Instructions (PDF) 

  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
    x
                Please view the product's page for more information
            
  • Small Block Chevy Street Tunnel Ram Kit, Polished Scoop
    Small Block Chevy Street Tunnel Ram Kit, Polished Scoop
    x
                

    Oh baby, this would look cool on your car! Complete street tunnel ram kit with Edelbrock manifold. Includes two 500 cfm manual choke Edelbrock carburetors, gasser style scoop and linkage. Not for the faint of heart! (3500-7500 rpm) 

    Designed for 302-327-350-400 c.i.d. small-block Chevy V8s operating below 7500 rpm where low-end torque is not a prime factor. Great for engines with slightly modified heads. Applicable to street machines, street rods, pro street and marine.Will not fit 1987 and later cast iron heads.

    Note: Only the scoop is polished.

  • Small Block Chevy Inboard Alternator Bracket
    Small Block Chevy Inboard Alternator Bracket
    x
                We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Inboard (high) mount brackets for early cars, meaning it will place the alternator up high between the intake manifold and valve cover. Mounts the alternator on the driver's side.


    Note: S/B Chevy, short style water pump only.
  • Professional Products 52030 Power Plus Hurricane 57-95 SBC Intake-Pol.
    Professional Products 52030 Power Plus Hurricane 57-95 SBC Intake-Pol.
    x
                

    No other performance intake manifold on the market is available with all the features and benefits found in the Power+Plus High Performance Racing Manifold.  These 360° manifolds feature dual distributor hold downs for Chevy, four corner water outlets, and line of sight port configuration. They also have extended port dividers, thermostat recess, and an accessory bracket boss and tapped hole. There is an air gap under the front water crossover for extra cooling and an extra tapped water port. 

    These manifolds have permanent mold castings for accurate port placement, tighter grain castings, and less porosity. They have nitrous bosses, measure 5.12" from carb base to bottom of manifold, and are available in satin finish or polished (the area under the intake runners is not polished). RPM range is 3000-7500 RPM.

    Dyno Chart (PDF)

    910-11290 Instructions (PDF) 

  • Shotgun Bill Big Block Chevy Tunnel Ram Kit
    Shotgun Bill Big Block Chevy Tunnel Ram Kit
    x
                

    This complete Shotgun Bill Street Tunnel Ram Kit features the  Edelbrock 2-O manifold designed for use on 396-502 c.i.d. big-block Chevy V8s with large oval-port heads (1975 and earlier). Ideal for lightweight applications such as T-buckets or pro-street cars where low-end torque is not a prime factor. Especially suited to engines using slightly modified or aftermarket cylinder heads (9.5:1 or more compression is advised). Optimum power range is 3500-7500 rpm.

    Includes unpolished manifold, two 600 cfm manual choke Edelbrock Perfromer carburetors, polished Shotgun Bill scoop with filters and linkage. Not for the faint of heart!

  • Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    x
                Please view the product's page for more information
            
  • MSD 85501 Chevy V8 Pro-Billet Distributor, Locked-Out Timing
    MSD 85501 Chevy V8 Pro-Billet Distributor, Locked-Out Timing
    x
                Please view the product's page for more information
            
  • Street Demon 1905 750 CFM Hand-Polished Aluminum Carburetor
    Street Demon 1905 750 CFM Hand-Polished Aluminum Carburetor
    x
                Please view the product's page for more information
            
  • Lokar KD-2350U TH350 Kickdown Kit
    Lokar KD-2350U TH350 Kickdown Kit
    x
                

    These Turbo 350 transmission kickdown kits have a stainless bracket that mounts on rear manifold bolts. Designed for 4 barrel carburetors on S/B Chevy engines. Kit includes extender for more versatility in adjusting cable length where needed. For TH350 transmission application.

    Note: Cable housing cannot be cut to fit.

  • Edelbrock 18014 Endurashine AVS 4 Barrel Carb, 500 CFM, Electric Choke
    Edelbrock 18014 Endurashine AVS 4 Barrel Carb, 500 CFM, Electric Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. This four barrel carb can be easily adjusted, in seconds, to suit your application - no extra parts required to achieve optimum performance. Also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Two-piece design means no gaskets below the fuel level for leak-free operation

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18024 Endurashine AVS 4 Barrel Carb, 500 CFM, Manual Choke
    Edelbrock 18024 Endurashine AVS 4 Barrel Carb, 500 CFM, Manual Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 500 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
    Edelbrock 18054 Endurashine AVS 650 CFM 4 Barrel Carburetor-Man. Choke
    x
                

    The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It can be easily adjusted - in seconds - to suit your application...no extra parts required to achieve optimum performance. This four barrel carb also features Edelbrocks's amazing Endurashine finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This coating won't fade or oxidize and cleans up easily with soap and water.

    Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design.

    • Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels
    • Includes both timed and full vacuum ports for ignition advance
    • Dual inlets

    Edelbrock 650 CFM 4 Barrel Carburetor Installation Instructions (PDF)

  • Garage Sale - Professional Products Cyclone Small Block Chevy Intake Manifold, Polished
    Garage Sale
    Garage Sale - Professional Products Cyclone Small Block Chevy Intake Manifold, Polished
    x
                Please view the product's page for more information
            
  • Garage Sale - Power Plus Big Block Chevy Intake, Polished
    Garage Sale
    Garage Sale - Power Plus Big Block Chevy Intake, Polished
    x
                The Power+Plus Cyclone Manifold is a direct replacement manifold for the stock manifold on Chevy big block engines with general duty oval port heads. This dual plane intake will accept either a Quadra-Jet or square flange carb. Also features nitrous bosses cast in for use with direct port systems. RPM range is idle to 6000.  Available plain, polished or chrome. This product comes with the adapter/cover plate for the OEM choke assembly to bolt to.  It also has the adapter/cover plate gasket and two allen head chrome cap screws for attachment.

    910-11270 Instructions (PDF) 

     

    This intake is garage sale priced because it has pits in the polished finish. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Tru-Ram Big Block Chevy Stainless Steel Exhaust Manifolds - Polished
    Garage Sale
    Garage Sale - Tru-Ram Big Block Chevy Stainless Steel Exhaust Manifolds - Polished
    x
                Please view the product's page for more information
            
  • Professional Products Cyclone Vortec Small Block Chevy Intake Manifold
    Garage Sale
    Professional Products Cyclone Vortec Small Block Chevy Intake Manifold
    x
                

    The Professional Products Cyclone manifold is the ideal street manifold for street rods or engine swaps using the popular1996 and later Vortec (L31) cast iron heads. Manifold includes adapter to use a square bore carb and features dual distributor hold downs. Also includes two pipe tapped rear water ports. Available for plain or polished. 

    Fits Vortec blocks or 1995 & earlier blocks with Vortec heads. RPM range is idle to 5500.

    Chevy Vortec Manifold Installation Instructions (PDF) 

     

    Chrome intakes are clearance priced.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS    

  • Garage Sale - Small Block Chevy Inboard Alternator Bracket
    Garage Sale
    Garage Sale - Small Block Chevy Inboard Alternator Bracket
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Inboard (high) mount brackets for early cars, meaning it will place the alternator up high between the intake manifold and valve cover. Mounts the alternator on the driver's side.


    Note: S/B Chevy, short style water pump only.

     

    This bracket is garage sale priced because it was loose packed and has quite a few scratches.  This one is also missing a spacer. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Small Block Chevy Inboard Alternator Bracket
    Garage Sale
    Garage Sale - Small Block Chevy Inboard Alternator Bracket
    x
                

    We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, and polished billet aluminum brackets to make this a simple installation.

    Inboard (high) mount brackets for early cars, meaning it will place the alternator up high between the intake manifold and valve cover. Mounts the alternator on the driver's side.


    Note: S/B Chevy, short style water pump only.

     

    This bracket is garage sale priced because it has been test fit and returned.  This one is also missing one of the bolts. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS