Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy oil pump" Page 1 of 5

  • Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
    x
                

    Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

  • Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    Hy-Lube Small Block Chevy Oil Pump Block-Off Plate
    x
                

    When running a dry sump oil system on your Small Block Chevy you should use this block-off plate on the rear main cap cover of the oil gallery.

    • Simulates torque loading
    • Anodized for protection
    • Hardware included
  • Melling MCAT-62 Chevy 5/8 Inch Oil Pump Pick-up Installation Tool
    Melling MCAT-62 Chevy 5/8 Inch Oil Pump Pick-up Installation Tool
    x
                Trying to drive an oil pump pick-up tube into a Chevy oil pump can be a frustrating job. This nifty tool made by Melling makes the job easy!
            
  • Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    Small Block Chevy Claimer Oil Pan w/ Plug Combo, Hi-Vol. Pump, LH Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Meets 2011 IMCA rules. Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan with 1" inspection plug (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • High Volume Pump (55-65 psi preset)
  • Deluxe Hi-Volume Small Block Chevy Oil Pump
    Deluxe Hi-Volume Small Block Chevy Oil Pump
    x
                

    This oil pump has all it's components hand picked and fit to make it the best. The nickel body and end plate have been machined to balance the pressure at all rpm's which also reduces cavitation and increases longevity. Includes three pressure springs and a steel oil pump driveshaft sleeve.

    For Small Block Chevy V-8. Use 5/8" pick-up tube.

  • Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    Moroso 22090 Small Block Chevy Oil Pump Shaft for Big Block Oil Pump
    x
                Use these oil pump shafts to upgrade the weak link in any wet sump system. With steel sleeve.
            
  • Small Block Chevy Copper Oil Pump Mounting Gaskets
    Small Block Chevy Copper Oil Pump Mounting Gaskets
    x
                

    Does your oil pump leak where it mounts to the main cap? Not anymore with our dead soft copper oil pump mounting gaskets.

    Bag of 3 gaskets.

  • Pickup for Stock Small Block Chevy Oil Pump
    Pickup for Stock Small Block Chevy Oil Pump
    x
                

    Oil pump pickups are designed to work with our claimer pans. Includes mounting tab.

    This pick up is designed for a stock 5 quart pan that is 7-1/4" deep

  • Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    Melling 10050-700CT Billet Small Block Chevy Oil Pump, Circle Track
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs

    Includes 12550 chromoly intermediate shaft, stud kit and +10# and -10# relief springs.

  • Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    Melling 10050-825SS Billet Small Block Chevy Oil Pump, Drag Race
    x
                

    These billet aluminum oil pumps will give you a serious advantage over the competition. Not only do they provide a smoother oil flow through the pump, they give you 5-6 HP and have the pickup built right in. 

    Includes 12550 chrome moly intermediate shaft, stud kit and +10# and -10# relief springs.

    • 25% increase in volume over stock oil pump
    • Lightweight billet 6061-T6 aluminum housing & cover
    • Protective hard-anodized coating on housing & gears
    • Chromoly steel driveshaft
    • Integrated stainless mesh pickup screen
    • Has multiple pressure settings
    • Supercharged inlet allows for improved performance at high RPMs
  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • ARP 134-7901 Small Block Chevy Oil Pump Driveshaft Kit
    New
    ARP 134-7901 Small Block Chevy Oil Pump Driveshaft Kit
    x
                

    These oil pump drive shaft kits from ARP are designed for use with heavy duty oil pumps for small block Chevy engines.

    • Black oxide finish
    • HD oil pumps
    • Small Block Chevy
    • Made in the U.S.A
  • Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
    x
                

    If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

    • Pick-up 54524120 or 54524122 is required for installation
    • Wet Sump, 9" Deep
    • Clears 3.80" stroke with most steel rods
    • Notched sump clears steering linkage
    • Compatible with most starter/flywheel combinations
    • Reduces oil temperature

    For cars without power steering. Pump pick-up NOT included but is available as noted below.

    Moroso Oil Pan Instructions (PDF)

  • Big Block Chevy Oil Pump
    $49.99
    Big Block Chevy Oil Pump
    x
                

    High volume B/B Chevy oil pump. 22% more volume than stock. 5 bolt cover.  Requires a 3/4" Pickup.

    NOTE:   If using this pump on a SBC motor, additional modifications may need to be made to the oil pan for clearance.

  • Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    Melling 10550 Select Small Block Chevy Oil Pump, High Volume
    x
                

    Melling Select Series oil pumps are engineered to give you superior oiling for your high performance engine. 5/8" pickup required.

    • Steel billet gears with drive gear pinned to shaft
    • CNC machined housing and cover plate
    • Coated for wear and corrosion resistance
    • 5/8" inlet

    Available in standard volume or high-volume, which has 25% more volume.

  • Moroso 20431 Big Block Chevy Conversion Oil Pan
    Moroso 20431 Big Block Chevy Conversion Oil Pan
    x
                

    If you have ever tried to put a B/B chevy in a Tri-Five Chevy or Chevy II, you know there just isn't much room. This pan was designed to make the job a little easier. This pan has a 7 quart capacity (w/o filter) and accepts up to a 4-1/4" stroke with steel rods.

    • Pick-up 54524430 is required for installation
    • Notched rear sump clears steering linkage
    • Accepts strokes up to 4.250" with steel rods, 4.090" with aluminum rods
    • Compatible with most starter/flywheel combinations
    • 1/4" NPT Thread for dipstick assembly, suggested dipstick # 545-25971

    Fits Mark IV style 396-454 (except Gen V and Gen VI) Big Block Chevy V-8s. For 1962-67 Chevy II (without power steering) and 1955-57 Chevys. Transmission MUST be in stock position.

    Please see below for suggested oil pump pick-up.

    Instructions (PDF)

  • Speedway Small Block Chevy Stainless Engine Bolt Kit
    Speedway Small Block Chevy Stainless Engine Bolt Kit
    x
                

    This complete Allen head stainless steel engine fastener kit will resist corrosion caused by extreme under-hood environments, all while dressing up your engine. Fits '55-'86 Small Block Chevy engines.

    Kit includes:

    • Intake manifold bolts
    • Timing cover bolts
    • Oil pan bolts
    • Short water pump bolts
    • Long water pump bolts
    • TH350/400 transmission pan bolts
    • Exhaust header bolts
    • Water neck bolts, 1955-1965
    • Water neck bolts, 1966-1986
    • Flywheel cover bolts
  • Melling 10553 Select Small Block Chevy Oil Pump, Standard Volume
    Melling 10553 Select Small Block Chevy Oil Pump, Standard Volume
    x
                Melling Select Series oil pumps are engineered to give you superior oiling for your high performance engine. 5/8" pickup required. 
    • Steel billet gears with drive gear pinned to shaft
    • CNC machined housing and cover plate
    • Coated for wear and corrosion resistance
    • 5/8" inlet
    Available in standard volume or high-volume, which has 25% more volume.
  • Big Block Chevy Oil Pump Pick-up
    Big Block Chevy Oil Pump Pick-up
    x
                This pickup works with a hi-volume "big block" pump like our 577OP77HV.
            
  • GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    GM Performance 19201332 Big Block Chevy ZZ502 Turn-Key Crate Engine
    x
                Please view the product's page for more information
            
  • Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    Hi-Volume Small Block Chevy Claimer Oil Pan Combo, LH Side Dipstick
    x
                

    Save money with our Claimer Pan Combos! For Small Block Chevy 1955-79 (driver side dipstick). Will not fit rear steer cars unless the engine has been moved back. Works with stock or mini starters.

    Kits include:

    • Claimer Oil Pan (6 quart, 7-1/4" deep)
    • Oil Pump Pickup, 5/8" diameter 
    • Stock Volume Pump or High Volume Pump (both 55-65 psi preset)
  • Speedway Chevy V8 Oil Pump Primer
    Speedway Chevy V8 Oil Pump Primer
    x
                

    Use with an electric drill to prime engine before starting. Remove the distributor and insert this primer to engage the end of the oil pump drive.

  • GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    GM Performance 12499529 Small Block Chevy 350/290 Long Block Engine
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3 4 5