Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy king pin installation" Page 1 of 1

  • Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    Speedway 1949-54 Chevy Car Modified Spindles w/ Deluxe King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Deluxe kingpins feature modern needle bearing inserts that replace the standard brass bushings
    • Deluxe kingpins are ideal for use on heavier street rods that require superior strength, better lubrication and easier steering
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Deluxe 1949-54 Chevy King Pin Set
    Deluxe 1949-54 Chevy King Pin Set
    x
                

    Speedway deluxe king pins are a great improvement over stock-style king pins. They replace the original brass king pin bushings with precision needle bearings that provide superior strength, better lubrication and easier steering. They're simple to install and are an easy, cost-effective way to upgrade your 1949-54 Chevy suspension, as well as tubular or I-beam street rod axles using 1949-54 Chevy spindles.

    Use with 916-32100 or 916-32104 spindles.

    Spindle Identification Chart (GIF)

    910-32117 Instructions (PDF)

  • Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    Speedway 1949-1954 Chevy Car Modified Spindles w/ King Pins
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    • Includes many features not found on GM's original design
    • Forged steel (not cast) reproduction spindles
    • Kit includes pair of new spindles with new kingpins fit to spindle
    • Spindle nuts NOT included (sold separately)

    Spindle Identification Guide (GIF)

  • Standard 1949-54 Chevy King Pin Set
    Standard 1949-54 Chevy King Pin Set
    x
                

    These kingpin kits come complete with bushings, bearings and locks. All standard kingpin bushings must be reamed or honed to exact size after installation in your spindles.

    Note: These kingpins will fit stock 1949-54 Chevy passenger car spindles as well as Speedway reproduction 1949-54 Chevy spindles 916-32100.

    Spindle Identification Guide (GIF)

    910-32123 Instructions (PDF)

     

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Speedway 1949-54 Chevy Car Modified Spindles Only
    Speedway 1949-54 Chevy Car Modified Spindles Only
    x
                

    Speedway has produced these new forged steel reproduction car spindles. They have many features not available with GMs' original design! These spindles are the choice of professional builders because of their clean look, strength and ease of installation.

    • Made to direct mount Mustang II hubs and rotors plus many other later GM's
    • Kingpin geometry changed to work with current radial tire construction
    Spindles also available in kit form with kingpins. Save when you purchase a complete kit!

    Spindle Identification Guide (GIF)

  • Garage Sale - Speedway 1949-54 Chevy Car Modified Spindles W/O King Pins
    Garage Sale
    Garage Sale - Speedway 1949-54 Chevy Car Modified Spindles W/O King Pins
    x
                Please view the product's page for more information