Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy ii rack pinion" Page 1 of 2

  • Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    Speedway Mustang II Crossmember for 1947-54 Chevy Pickup Frame, Kit
    x
                Please view the product's page for more information
            
  • Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    Unisteer 8000930-01 1962-1967 Chevy II/Nova Manual Rack & Pinion Kit
    x
                

    These rack & pinion conversion kits will finally give your 62'-67' Chevy II or Nova the ease of steering and road feel modern cars have. Each kit is engineered to bolt in without sacrificing steering geometry or safety. The manual rack & pinion has been modified to match the front suspension of the Chevy II/Nova, the resulting rack & pinion is geometrically correct offering no or negligible bump steer.

    Installation is easy, the rack & pinion comes mounted to its custom mounting bracket that bolts up to the existing engine mounts. No welding or cutting involved!

    Kit includes:

    • Manual Rack & Pinion
    • Black Powdercoated Mounting Bracket
    • Steering Arms
    • Tie Rod Ends

     

  • Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    Heidts 1955-59 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Speedway 1955-1959 Chevy Truck Crossmember
    Speedway 1955-1959 Chevy Truck Crossmember
    x
                Please view the product's page for more information
            
  • Heidts 1937-39 Chevy Truck Econo Mustang II Crossmember
    Heidts 1937-39 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    Heidts 1947-54 Chevy Truck Econo Mustang II Crossmember
    x
                Please view the product's page for more information
            
  • Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    Heidt's Mustang II Crossmember for 1934-36 Chevy Master Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    Speedway Mustang II Crossmember-1937-39 Chevy Pickup Frame, Kit-Deluxe
    x
                

    These Speedway Mustang IFS kits for 1937-39 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1939 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a "

  • 37-48 Chevy Car Crossmember
    $299.99
    Product Rating: 4.00 Stars
    37-48 Chevy Car Crossmember
    x
                

    These Speedway Mustang IFS kits for 1937-1948 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are all the special, hard-to-make brackets and mounts you will need to complete the installation, plus illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1937-1948 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers

  • Heidts CX102  1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    Heidts CX102 1937-39 Chevy Frame Mustang II Crossmember, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    Heidts Mustang II Crossmember for 1949-54 Chevy Car Frame, Weld-On Kit
    x
                Please view the product's page for more information
            
  • Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    Speedway 1949-1954 Chevy Speedway Mustang II Deluxe Steel Crossmember
    x
                

    These Speedway Mustang IFS kits for 1949-1954 Chevy passenger cars are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1949-1954 Chevy car frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get a

  • Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    Speedway Mustang II Crossmember Kit-1940-1946 Chevy Pickup Frame-DLX
    x
                

    These Speedway Mustang IFS kits for 1940-46 Chevy Pickups are natural conversions to improve your vehicle's suspension, handling, and overall performance. The Chevy models have frames and fenders which lend themselves nicely to the Mustang front end conversion, without changing the critical geometry.  Like our Ford kits, Chevy kits do not bumpsteer at all.  Included in these kits are illustrated installation instructions.

    • Mounting points of all control arms match the original Ford design
    • Factory anti-drive built right in
    • 1940-1946 Chevy Pickup frames
    • All Speedway crossmembers come in Deluxe versions (welds ground)
    • Constructed of 7-gauge steel
    • Mustang II cross members using stock spindles will drop the stock ride height 3-4”
    • One-Piece Shock Cups are T.I.G. welded in place and have anti-dive built in.
    • Vertical Inner Uprights.  This is the strongest design available, with twice the weld area.  This will keep your frame from twisting!
    • Crossmember and Spring Towers precut and pre-welded to fit your frame
    • Lower control arm pivot tubes and gussets are NOT included
    • Works with both manual or power rack and pinions

    Choose from the crossmembers below and add to an IFS kit to get

  • Speedway Mustang II Crossmember for 1962-67 Chevy II/Nova, Bolt-On
    Speedway Mustang II Crossmember for 1962-67 Chevy II/Nova, Bolt-On
    x
                Please view the product's page for more information
            
  • Heidts Universal Multi-Fit 60 Econo Mustang II Crossmember Kit
    Heidts Universal Multi-Fit 60 Econo Mustang II Crossmember Kit
    x
                Please view the product's page for more information
            
  • 1955-57 Chevy Chassis Headers for Rack and Pinion, Plain
    1955-57 Chevy Chassis Headers for Rack and Pinion, Plain
    x
                

    If you are running our Unisteer rack & pinion, you will need these headers. They allow the steering shaft to pass through on the driver's side and are a shorty style for maximum ground clearance. Features 1-5/8" primaries with a 3" collector.

    • Tubing Thickness:  12 gauge (.103")
    • Header Flange Thickness:  0.30"
    • Exhaust Flange Thickness:  0.3760"

    Fits 283-400 S/B Chevy V8s with straight plug heads.

    Header Dimensions (GIF) 

    Note: Will not fit 168 tooth flywheels or kickout aftermarket starters. Will not fit manual transmission cars with factory Z bar clutch linkage.

  • 1955-57 Chevy Chassis Headers for Rack and Pinion, Chrome
    1955-57 Chevy Chassis Headers for Rack and Pinion, Chrome
    x
                If you are running our Unisteer rack & pinion, you will need these headers. They allow the steering shaft to pass through on the driver's side and are a shorty style for maximum ground clearance. Features 1-5/8" primaries with a 3" collector.
    • Tubing Thickness:  12 gauge (.103")
    • Header Flange Thickness:  0.30"
    • Exhaust Flange Thickness:  0.3760"
    • Chrome finish

    Fits 283-400 S/B Chevy V8s with straight plug heads.

    Header Dimensions (GIF) 

    Note: Will not fit 168 tooth flywheels or kickout aftermarket starters. Will not fit manual transmission cars with factory Z bar clutch linkage

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution co

  • 1955-57 Chevy Chassis Headers for Rack and Pinion, AHC Coated
    1955-57 Chevy Chassis Headers for Rack and Pinion, AHC Coated
    x
                

    If you are running our Unisteer rack & pinion, you will need these ceramic coated headers. They allow the steering shaft to pass through on the driver's side and are a shorty style for maximum ground clearance. Features 1-5/8" primaries with a 3" collector.

    • Tubing Thickness:  12 gauge (.103")
    • Header Flange Thickness:  0.30"
    • Exhaust Flange Thickness:  0.3760"

    Header Dimensions (GIF) 

    Fits 283-400 S/B Chevy V8s with straight plug heads.

    Note: Will not fit 168 tooth flywheels or kickout aftermarket starters. Will not fit manual transmission cars with factory Z bar clutch linkage.

  • 1955-57 Chevy Chassis Headers for Rack and Pinion, Stainless Steel
    1955-57 Chevy Chassis Headers for Rack and Pinion, Stainless Steel
    x
                If you are running our Unisteer rack & pinion, you will need these headers. They allow the steering shaft to pass through on the driver's side and are a shorty style for maximum ground clearance. Features 1-5/8" primaries with a 3" collector.
    • Tubing Thickness:  12 gauge (.103")
    • Header Flange Thickness:  0.30"
    • Exhaust Flange Thickness:  0.3760"
    • Stainless steel finish

    Fits 283-400 S/B Chevy V8s with straight plug heads.

    Header Dimensions (GIF) 

    Note: Will not fit 168 tooth flywheels or kickout aftermarket starters. Will not fit manual transmission cars with factory Z bar clutch linkage

    Note: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine is started, will change to a light champagne color

  • Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    Mustang II IFS, Std. Tubular Control Arms, Stock Springs, Dropped Spindles
    x
                Includes standard upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, new black stock type springs and  shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 11" brake kit features GM Metric calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Stock Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-

  • Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    Mustang II IFS, Standard Tubular Control Arms, Stock Springs and Spindles
    x
                

    Includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2&qu

  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Stock Spindles
    x
                Please view the product's page for more information
            
  • Mustang II IFS w/ New Stock Control Arms and Dropped Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Dropped Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get    brand new stamped steel upper and lower control arms with polyurethane    bushings, 2" dropped steel spindles, Rubber Brake Lines, air springs with  shocks, new manual rack & pinion with bushings   or remanufactured  power rack & pinion with bushings and an 11"  brake  kit featuring  GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4"  bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod (91034315)

  • Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    Mustang II IFS w/ New Stock Control Arms and Stock Spindles, Air Ride
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, new steel spindles, Rubber Brake Lines, air springs with shocks, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • New steel spindles
      • Air springs with shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: These IFS kits will require use of strut rods and brackets for the lower control arms.  These kits will work with our replacement strut rod

  • Mustang II IFS w/ New Stock Control Arms and Spindles, Coilover Shocks
    Mustang II IFS w/ New Stock Control Arms and Spindles, Coilover Shocks
    x
                Please view the product's page for more information
            
  • Mustang II IFS w/ New Stock Control Arms, Springs, Shocks, and Spindles
    Mustang II IFS w/ New Stock Control Arms, Springs, Shocks, and Spindles
    x
                Please view the product's page for more information
            
  • Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    Mustang II Coilover IFS w/ Stock Control Arms, Coilovers, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get   brand new stamped steel upper and lower control arms with polyurethane   bushings, steel 2" dropped spindles, Rubber Brake Lines, Carrera coil-over shock & spring, new manual rack & pinion with bushings   or remanufactured power rack & pinion with bushings and an 11"  brake  kit featuring GM Metric-style calipers, with your choice of 5 x  4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • Carrera coil-over shock & spring
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (

  • Mustang II IFS, Stock Control Arms, Springs, and Shocks, Dropped Spindles
    Mustang II IFS, Stock Control Arms, Springs, and Shocks, Dropped Spindles
    x
                With our complete Mustang II Independent Front Suspension kit you get  brand new stamped steel upper and lower control arms with polyurethane  bushings, steel 2" dropped spindles, Rubber Brake Lines, new black stock  type springs & shocks, new manual rack & pinion with bushings  or remanufactured power rack & pinion with bushings and an 11" brake  kit featuring GM Metric-style calipers, with your choice of 5 x 4-1/2"  or 5 x 4-3/4" bolt patterns. 
    • Works with most Speedway and Heidts crossmembers (be sure to check control arm correspondence when choosing crossmember for your vehicle)
    • These kits are compatible with your application based on which crossmember you have.
    • Kit Includes:
      • New stamped steel upper and lower control arms with polyurethane bushings
      • 2" dropped spindles
      • New black stock-type springs
      • New shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Crossmember NOT included - Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    WARNING: To offer our customers a better range of spring rates, the springs

  • Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    Mustang II IFS, Std. Tubular Control Arms, Coilover Springs, Stock Spindles
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new standard spindles, rubber brake lines, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Coilover Springs
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2" frame widths, you w

  • Mustang II IFS, Tubular Control Arms, Coilover Springs, Dropped Spindles
    Mustang II IFS, Tubular Control Arms, Coilover Springs, Dropped Spindles
    x
                Hub-to-hub kit includes tubular upper and offset strutless lower control arms, new standard spindles, rubber brake lines, 2" dropped spindles, Carrera coilovers, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Carrera Coilovers
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers for 27-1/2" - 33-1/2&qu

  • Mustang II-GM Pump Power Steering Hose Kits
    Mustang II-GM Pump Power Steering Hose Kits
    x
                It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Our Mustang II/GM pump power steering hose assemblies are an inexpensive alternative to  the more costly stainless steel braided hose kits. The return hose included in this kit will  normally need to be cut to length.

    This has an adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting.

    This will work with the 1974-78 Mustang II power rack and pinion in conjunction with the suggested power steering pumps 910-32922-FORD and 910-32908-BLK. When using an early GM pump with Mustang II rack, you will also need flow reducer valve 910-32918. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together.
  • Mustang II IFS, Narrow Control Arms, Stock Springs, Dropped Spindles
    Mustang II IFS, Narrow Control Arms, Stock Springs, Dropped Spindles
    x
                Includes 5/8" narrower upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, new black stock type springs and  shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 11" brake kit features GM Metric calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" Narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Stock Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal c

  • Mustang II IFS, Narrow Control Arms, Coilover Springs, Dropped Spindles
    Mustang II IFS, Narrow Control Arms, Coilover Springs, Dropped Spindles
    x
                Hub-to-hub kit includes 5/8" narrower upper and offset strutless lower control arms, 2" dropped spindles, rubber brake lines, Carrera  coilovers, new manual or rebuilt power rack & pinion with  bushings and  new tie rods. The 11" brake kit features GM Metric  calipers, with your  choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Carrera Coilovers
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers

  • Mustang II IFS, Narrow Tubular Control Arms, Stock Springs and Spindles
    Mustang II IFS, Narrow Tubular Control Arms, Stock Springs and Spindles
    x
                

    Includes 5/8" narrower upper and offset strutless lower control arms, new standard spindles, rubber brake lines, new black stock type springs and shocks, new manual or rebuilt power rack & pinion with bushings and new tie rods. The 11" brake kit features GM Metric calipers, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles, Springs, and Shocks
      • Rack and Pinion with bushings and tie rods
      • 11" brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note: Additional items may be needed to complete installation.  You may want to include our Mustang II ride height adjusters (91034444) for installation with these IFS kits to fine tune your final ride height up to 2".

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Pickups, or universal crossmembers fo

  • Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Narrow Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes 5/8" narrower upper and offset strutless  lower  control arms, 2" dropped spindles, rubber brake lines, air ride  , new manual or rebuilt power rack & pinion with  bushings  and   new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers  with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt   pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • 2" Dropped Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959

  • Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Short Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                

    Hub-to-hub kit includes 5/8" narrower upper and offset strutless lower control arms, new standard spindles, rubber brake lines, air ride , new manual or rebuilt power rack & pinion with bushings and new tie rods. The 10-3/4" Wilwood brake kit features GM Metric calipers with rubber hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt pattern.

    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • 5/8" narrower Tubular Upper and Lower Strutless Control Arms
      • New Standard Spindles
      • Air Ride Suspension shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM calipers
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford Pickups, 1955-1959 Chevy Picku

  • Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Dropped Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower  control arms, new 2"  dropped spindles, rubber brake lines, air ride  springs/shocks, new manual or rebuilt power rack & pinion with  bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM   Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x  4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New 2" Dropped Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossm

  • Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    Mustang II IFS, Std. Control Arms, Air Ride, Stock Spindles, Wilwood Brakes
    x
                Hub-to-hub kit includes standard upper and offset strutless lower control arms, new  standard spindles, rubber brake lines, air ride springs/shocks, new manual or rebuilt power rack & pinion with bushings and  new tie rods. The 10-3/4" Wilwood brake kit features GM  Metric calipers with rubber  hoses, with your choice of 5 x 4-1/2" or 5 x 4-3/4" bolt  pattern.
    • Works with all Speedway and Heidts crossmembers 
    • Kit Includes:
      • Standard Tubular Upper and Lower Strutless Control Arms
      • New Stock Spindles
      • Air Ride Springs/Shocks
      • Rack and Pinion with bushings and tie rods
      • 10-3/4" Wilwood brake kit with GM Metric calipers
      • Choose 5 x 4-1/2" or 5 x 4-3/4" bolt pattern
    1. Add proper crossmember to complete kit.

    Spring Rate Chart (Link)

    Note:  OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

    Note:  If using these kits with Speedway or Heidts crossmembers for 1948-1956 Ford P

  • Heidts Universal 56-1/2 Econo Crossmember
    Heidts Universal 56-1/2 Econo Crossmember
    x
                Please view the product's page for more information
            
  • Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember
    x
                

    Our bolt-in Mustang II suspension kit for 1947-1954 Chevy half-ton and 3/4 ton pickups includes all hardware and instructions. 

    • Completely bolt in - no welding required
    • Based on proven Mustang II geometry
    • Complete with bolt in boxing plates to reinforce the frame
    • Interlocking design for ultimate strength
    • Threaded adjusters to fine tune ride height
    • Full lower A-arms required with this crossmember (strutless type)
    • Requires the use of a power rack and pinion and tubular control arms
    • NOT for use with air ride

    910-44754 Instructions (PDF)

    Note:  Use bolt-in motor mount kit 910-54754 to mount your S/B Chevy.
Goto Previous PagePrevious Page
1 2