Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy heavy beam rods" Page 1 of 1

  • Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
    Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
    x
                

    Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

    Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

  • Small Block Chevy 5140 Steel I-Beam Rods, 5.7 Inch, Press Pin
    Small Block Chevy 5140 Steel I-Beam Rods, 5.7 Inch, Press Pin
    x
                

    These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws.

    Set of 8.

  • Small Block Chevy 5140 Steel I-Beam Rods, 6.0 Inch, Bushed Pin
    Small Block Chevy 5140 Steel I-Beam Rods, 6.0 Inch, Bushed Pin
    x
                

    These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws.

    • Torque 8640 Cap Screws to 64 ft./lbs.
    • Crank Pin:  2.100"
    • Wrist Pin:  .927"
    • Big End Width:  .940"

    Set of 8.

  • Small Block Chevy 5140 Steel I-Beam Rods, 5.7 Inch, Bushed Pin
    Small Block Chevy 5140 Steel I-Beam Rods, 5.7 Inch, Bushed Pin
    x
                

    These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws.

    • Torque Cap Screws to 50 ft./lbs.
    • Crank Pin:  2.100"
    • Wrist Pin:  .927"
    • Big End Width:  .940"

    Set of 8.

  • Small Block Chevy 5140 Steel I-Beam Rods, 6.0 Inch, Press Pin
    Small Block Chevy 5140 Steel I-Beam Rods, 6.0 Inch, Press Pin
    x
                

    These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws.

    Set of 8.

  • Forged Small Block Chevy Rotating Assembly, 383 Flat Top, H-Beam, 5.7 Rods
    Forged Small Block Chevy Rotating Assembly, 383 Flat Top, H-Beam, 5.7 Rods
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 383: 4.000" bore x 3.75" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 383 Dome, H-Beam, 5.7 Rods
    Forged Small Block Chevy Rotating Assembly, 383 Dome, H-Beam, 5.7 Rods
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 383: 4.000" bore x 3.75" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 350 Flat Top, H-Beam, 5.7 Rods
    Forged Small Block Chevy Rotating Assembly, 350 Flat Top, H-Beam, 5.7 Rods
    x
                Please view the product's page for more information
            
  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    Blueprint BP3830CT1 383 Small Block Chevy Vortec Head Crate Engine
    x
                Please view the product's page for more information
            
  • BluePrint Budget 350 Crate Engine
    $2,699.99
    $2,799.98
    BluePrint Budget 350 Crate Engine
    x
                
    • 325 hp @ 5400 rpm
    • 360 ft.-lbs. @ 3900 rpm
    • 4-bolt main, 1-piece rear main seal
    • Passenger side dipstick
    • Align honed main bearing bore
    • Cylinders honed on computer controlled machine to within .0002 straightness and roundness
    • Cylinders are sonic tested for thickness
    • BluePrint premium cast iron crankshaft
    • Hypereutectic pistons
    • Chevy heavy beam rods with 150,000 PSI bolts
    • Aluminum dual plane intake
    • Hydraulic flat tappet cam
    • .480 intake / .486 exhaust & 229 intake / 230 exhaust duration @.050
    • Heavy duty double roller timing set
    • BluePrint premium center bolt cast iron
    • Hardened retainers and springs
    • 2.02 swirl polished intake valves
    • 1.60 swirl polished exhaust valves
    • 9.5 to 1 compression
    • New valve covers, oil pan and timing cover
    • Brass freeze plugs
    • New HEI distributor
  • Forged Small Block Chevy Rotating Assembly, 383 Dome, H-Beam, 6 Inch Rods
    Forged Small Block Chevy Rotating Assembly, 383 Dome, H-Beam, 6 Inch Rods
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 383: 4.000" bore x 3.75" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 350 Dome, H-Beam, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 350 Dome, H-Beam, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 350: 4.000" bore x 3.48" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 383 Flat Top, H-Beam, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 383 Flat Top, H-Beam, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 383: 4.000" bore x 3.75" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 350 Flat Top, H-Beam, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 350 Flat Top, H-Beam, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 383: 4.000" bore x 3.75" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    Chevy Wilwood Front Brake & Steering Kits, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1949-54 Chevy spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .380" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs
  • Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Forged S/B Chevy Rotating Assy., 434 Flat Top, 400 Main Journal, 6 Rod
    Forged S/B Chevy Rotating Assy., 434 Flat Top, 400 Main Journal, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 434: 4.125" bore x 4.00" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Light Forged Small Block Chevy Assembly, 434 Dome, 6 Inch Rods, 350 Mains
    Light Forged Small Block Chevy Assembly, 434 Dome, 6 Inch Rods, 350 Mains
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.

    Choose from standard, .030, or .040 oversize.

    NOTE: These rotating assemblies may require additional charges for heavy metal.

     


  • Forged S/B Chevy Rotating Assy., 434 Flat Top, 350 Main Journal, 6 Rod
    Forged S/B Chevy Rotating Assy., 434 Flat Top, 350 Main Journal, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 434: 4.125" bore x 4.00" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • BluePrint 383 Small Block Chevy Roller Crate Engine
    BluePrint 383 Small Block Chevy Roller Crate Engine
    x
                Please view the product's page for more information
            
  • Forged Small Block Chevy Rotating Assembly, 421 .283 Dome, 400 Mains, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 421 .283 Dome, 400 Mains, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate. 

    NOTE: A balance rotating assembly option is currently not offered for this package but the proper balancing service can be determined after your order is placed.  If you would like our balancing option service for 395 and 421 engine builds, please call 1-800-979-0122 when placing order.

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 421 .283 Dome, 350 Mains, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 421 .283 Dome, 350 Mains, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate. 

    NOTE: A balance rotating assembly option is currently not offered for this package but the proper balancing service can be determined after your order is placed.  If you would like our balancing option service for 395 and 421 engine builds, please call 1-800-979-0122 when placing order.

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 421 Flat Top, 400 Mains, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 421 Flat Top, 400 Mains, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate. 

    NOTE: A balance rotating assembly option is currently not offered for this package but the proper balancing service can be determined after your order is placed.  If you would like our balancing option service for 395 and 421 engine builds, please call 1-800-979-0122 when placing order.

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 421 Flat Top, 350 Mains, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 421 Flat Top, 350 Mains, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate. 

    NOTE: A balance rotating assembly option is currently not offered for this package but the proper balancing service can be determined after your order is placed.  If you would like our balancing option service for 395 and 421 engine builds, please call 1-800-979-0122 when placing order.

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Light Forged Small Block Chevy Assembly, 434 Flat Top, 6 Rod, 350 Mains
    Light Forged Small Block Chevy Assembly, 434 Flat Top, 6 Rod, 350 Mains
    x
                

    Our lightweight forged rotating assembly engine rebuild kits include a 44-45 lb. Scat Superlight 4340 forged 2-pc rear main seal crankshaft, Scat 4340 forged I-beam connecting rods and Mahle pistons complete with wrist pins, locks and rings. Rod and main bearings included. Standard size journals.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience. A kit purchased with the optional balance job will ship in 24-48 hours.

    Choose from standard or .020 oversize.

    NOTE: These rotating assemblies may require additional charges for heavy metal.


  • Forged Small Block Chevy Rotating Ass., 434 Dome, 400 Main Journal, 6 Rod
    Forged Small Block Chevy Rotating Ass., 434 Dome, 400 Main Journal, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 434: 4.125" bore x 4.00" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Ass., 434 Dome, 350 Main Journal, 6 Rod
    Forged Small Block Chevy Rotating Ass., 434 Dome, 350 Main Journal, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art "hines" balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    Chevy 434: 4.125" bore x 4.00" stroke

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 395 .400 Dome, 350 Mains, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 395 .400 Dome, 350 Mains, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate. 

    NOTE: A balance rotating assembly option is currently not offered for this package but the proper balancing service can be determined after your order is placed.  If you would like our balancing option service for 395 and 421 engine builds, please call 1-800-979-0122 when placing order.

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Forged Small Block Chevy Rotating Assembly, 395 .063 Dome, 350 Mains, 6 Rod
    Forged Small Block Chevy Rotating Assembly, 395 .063 Dome, 350 Mains, 6 Rod
    x
                

    Speedway introduces forged rotating assemblies, with an optional balance job. Includes new 2-pc rear main seal crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.  All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. These rotating assembly engine rebuild kits may require additional charges for heavy metal.

    If you are going to run this crank in a sprint car motor, you must have the crank flange turned down prior to balancing the crank to allow it to go through the motor plate.

    NOTE: A balance rotating assembly option is currently not offered for this package but the proper balancing service can be determined after your order is placed.  If you would like our balancing option service for 395 and 421 engine builds, please call 1-800-979-0122 when placing order.

    NOTE: Piston rings are not included and must be purchased separately. Use Style C rings.

  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    Ford Front Axle Steering & Brake Kit, 46 Inch Axle
    x
                Please view the product's page for more information
            
  • Small Block Chevy Rotating Assembly, 350 Flat Top-2 Valve Relief, 6 Rod
    Small Block Chevy Rotating Assembly, 350 Flat Top-2 Valve Relief, 6 Rod
    x
                Speedway introduces rotating assembly engine rebuild kits, with an optional balance job. Includes 2-pc rear main seal cast steel crank, rods and pistons. Cranks are new so they use standard size bearings. 

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A kit purchased with the optional balance job will ship in 24-48 hours.

    NOTE: Piston rings are not included and must be purchased separately.

    NOTE: These rotating assemblies may require additional charges for heavy metal.

  • Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.

    Features these Wilwood components:

    • 4-piston Forged Billet Dynalite Calipers
    • 10-3/4" diameter x .38" thick solid steel rotors - black finish
    • Lightweight clear-anodized aluminum hubs

    Choose:

    • Traditional or cross steering
    • Chrome or plain steering arms and tie rod cross bar  

    Traditional steering arm for left front wheel NOT included with kit.

  • Garage Sale - KB Claimer Chevy 350 Hypereutectic Pistons, Flat Top 4V, w/5.7 I-Beam Rods
    Garage Sale
    Garage Sale - KB Claimer Chevy 350 Hypereutectic Pistons, Flat Top 4V, w/5.7 I-Beam Rods
    x
                Please view the product's page for more information
            
  • Garage Sale - Small Block Chevy 5140 Steel I-Beam Rods, 5.7 Inch, Press Pin
    Garage Sale
    Garage Sale - Small Block Chevy 5140 Steel I-Beam Rods, 5.7 Inch, Press Pin
    x
                

    These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Requires heavy duty 3/8" cap screws (not included).

    Set of 8.

     

    These rods are garage sale priced because they are missing the rod bolts. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Small Block Chevy Steel I-Beam Rods, 6.0 Inch, Press Pin
    Garage Sale
    Garage Sale - Small Block Chevy Steel I-Beam Rods, 6.0 Inch, Press Pin
    x
                

    These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws.

    Set of 8.

     

    These rods are garage sale priced because they have been installed and returned.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Garage Sale - Small Block Chevy 5140 Steel I-Beam Rods, 6.0 Inch
    Garage Sale
    Garage Sale - Small Block Chevy 5140 Steel I-Beam Rods, 6.0 Inch
    x
                

    Our 5140 Steel Claimer I-Beam connecting rods for Small Block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP.

    Features heavy duty 3/8" cap screws (no longer comes with bolts). Available with bushed pin. Set of 8.

     

    These rods are garage sale priced because a few of them are scratched on the crank shaft end.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Speedway 1949-54 Chevy Car Modified Spindle
    Garage Sale
    Garage Sale - Speedway 1949-54 Chevy Car Modified Spindle
    x
                Please view the product's page for more information