Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy fuel tank filler neck" Page 1 of 1

  • 1955-59 Chevy Pickup Under Box Aluminum Fuel Tank
    1955-59 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 15 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    • 1/4" NPT 90° brass roll-over vent valve with 5/16" hose nipple
    • 1/4" female NPT pick-up
    • Pick-up tube treads into tank with 3/8" NPT threads
  • 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    Measures 38" x 12" x 8-1/2".  The actual tank is 38" wide, the mounting tabs are 3" on each side of the tank.  The total width of this tank is 44" with the mounting tabs.

    • 1/4" female NPT for vent hose / fitting
    • Male AN# 6 fitting affixed to a pick-up tube threaded into tank with 3/8" NPT threads
  • Walker C-487-2 Cobra 1930-1931 Ford Model A Radiator for Chevy Engine
    Walker C-487-2 Cobra 1930-1931 Ford Model A Radiator for Chevy Engine
    x
                Please view the product's page for more information
            
  • Walker B-Z-Ac487-2 Z-Series 30-31 Model A Radiator/Condser Ford Engine
    Walker B-Z-Ac487-2 Z-Series 30-31 Model A Radiator/Condser Ford Engine
    x
                Please view the product's page for more information
            
  • Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    Walker B-C-487-2 Cobra 1930-1931 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    Walker B-C-481-2 Cobra 1924-1927 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your v

  • Walker B-Z-4811 Z-Series 1917-1923 Ford Engine Model T Radiator
    Walker B-Z-4811 Z-Series 1917-1923 Ford Engine Model T Radiator
    x
                Please view the product's page for more information
            
  • Walker B-C-Ac487-2 Cobra 1930-31 Model A Radiator/Condser Ford Engine
    Walker B-C-Ac487-2 Cobra 1930-31 Model A Radiator/Condser Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

  • Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    Walker B-C-487-1 Cobra 1928-1929 Ford Model A Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    Walker B-C-481-1 Cobra 1917-1923 Ford Model T Radiator for Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Chrome dummy filler neck in OEM location - accepts stock caps & accessories 
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    S/B Ford engines can take advantage of less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by

  • Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    Walker B-Z-487-2 Z-Series 1930-1931 Ford Model A Radiator-Ford Engine
    x
                Please view the product's page for more information
            
  • Walker BC-Ac487-1 Cobra 1928-29 Model A Radiator/Condenser Ford Engine
    Walker BC-Ac487-1 Cobra 1928-29 Model A Radiator/Condenser Ford Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Dummy filler neck in OEM location - accepts stock type caps & accessories
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle

  • Garage Sale - Walker Z-Series 1933-34 Ford Radiator For Ford Engine
    Garage Sale
    Garage Sale - Walker Z-Series 1933-34 Ford Radiator For Ford Engine
    x
                Please view the product's page for more information
            
  • Garage Sale - 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    Garage Sale
    Garage Sale - 1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
    x
                

    These 17 gallon aluminum fuel tanks are designed to be mounted under your pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets.

    Measures 38" x 12" x 8-1/2".  The actual tank is 38" wide, the mounting tabs are 3" on each side of the tank.  The total width of this tank is 44" with the mounting tabs.

    • 1/4" NPT 90° brass roll-over vent valve with 5/16" hose nipple
    • 1/4" female NPT pick-up
    • Pick-up tube treads into tank with 3/8" NPT threads
     
    This is garage sale priced because it has some damage from shipping.
     
     
    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 
  • Garage Sale - Cobra Series '33-'34 Ford Radiator - Ford Engine
    Garage Sale
    Garage Sale - Cobra Series '33-'34 Ford Radiator - Ford Engine
    x
                

     

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Use Walker Fan Shroud Style B

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance t

  • Garage Sale - Walker Z-Series 1924-27 Ford Model T Radiator For Ford Engine
    Garage Sale
    Garage Sale - Walker Z-Series 1924-27 Ford Model T Radiator For Ford Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines.Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Chrome dummy filler neck in OEM location - accepts stock type caps & accessories
    • Works with original, reproduction steel, or fiberglass grille shells
    • 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock

    Small Block Ford engines can take advantage of the less expensive and more readily available "Chevy" radiators by using a passenger side inlet water pump (such as our 910-15544) and get additional steering box/fuel pump clearance to boot!

    Ford Chassis W/ Ford Engine Application Chart (