Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy frame rail mount pedal" Page 1 of 1

  • 1937-1939 Chevy Frame Rail Mount Pedal Assemblies
    1937-1939 Chevy Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately at right) to the left frame rail (boxed or open channel) of a '37-'39 Chevy frame. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

  • 1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1937-1939 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31939 Instructions (PDF)

  • 1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1940-1948 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31948 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1940-48 Chevy Car Frame Rail Mount Pedal Assemblies
    1940-48 Chevy Car Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included) to the left frame rail (boxed or open channel) of a 1940-48 Chevy passenger car frame. Bracket bolts to frame (slight trimming may be required). Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have. Round pedal pad screws onto pedal to finish the installation. 

    Pedal assembly kit includes zinc plated bracket, pedal, pedal pad and hardware.

  • 1949-1954 Chevy Frame Rail Mount Pedal Assemblies
    1949-1954 Chevy Frame Rail Mount Pedal Assemblies
    x
                

    This kit adapts our brake booster/master cylinder (not included, sold separately) This pedal assembly mounts to the OEM shelf of the stock transmission crossmember. No cutting or trimming required. Sturdy, steel pedal arm can easily be heated and bent to clear any obstacles your car may have.

    Pedal assembly kit includes black powder coated bracket, pedal, and hardware.

  • U Weld Model A Frame Assembly Kit
    U Weld Model A Frame Assembly Kit
    x
                If you're willing to pick up a welder in order to lower your rodding costs, Speedway Motors has a great new frame option for you.  The all-new Speedway Motors U-Weld-It Model A Frame Kit is the perfect way for do-it-yourself rodders to construct a solid, well-engineered chassis on a budget. This kit features all of the components featured on Speedway Motors' popular Model A Frame in one ready-to-weld package.

    The kit includes:
    • Boxed Model A frame rails with drilled and tapped body mounts
    • Two-inch dropped front crossmember
    • Front hairpin and rear four-bar suspension brackets
    • Front and rear shock mounts
    • S/B Chevy engine mounts
    • Transmission crossmember and mount
    • Rear crossmember kit
    • Rear panhard bar mount
    • Vega steering box mount
    • Master cylinder mount with brake pedal and hardware
    All parts are pre-cut and ready to weld together, making it simple for those with proper welding skills to assemble a strong, top-quality chassis for their street rod project.
  • Speedway 1927 Track-T Roadster Kit
    Speedway 1927 Track-T Roadster Kit
    x
                

    With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose.  The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles.  In such a small, lightweight car they become mighty spirited performers.

    The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel.  It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts.  Headlight mounts, hood top, and aluminum hood sides are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket. 

    The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will

  • 1932 Ford Frame Assembly
    $4,499.99
    1932 Ford Frame Assembly
    x
                

    Order the frame and your choice of front axle and rear end options. We start with a pair of new stamped steel frame rails that are installed in a precision jig to ensure the finished frame is square and true. We then install the tubular center crossmember and box the frame with our exclusive Boxed Truss® plating system (patent pending) in the critical engine bay area. This is a feature not available anywhere else and is a Speedway Motors exclusive.

    • New stamped frame rails
    • New 1" dropped front crossmemeber
    • Exclusive "Boxed Truss" C boxing system (patent pending)
    • Front panhard bar bracket
    • Front 4-bar frame bracket
    • Front shock mounts
    • Tubular cross member
    • Brake pedal & master cylinder mount (manual or power)
    • S/B Chevy motor mounts
    • Cross member allows use of TH350, TH400 or 700R4 transmissions
    • Vega steering box mount
    • Triangulated rear 4-bar brackets
    • Upper rear shock mounts
    • Hidden rear sway bar
    Truck Freight Shipping Charges Apply - click here for details
  • Model A Frame Assembly
    $1,999.99
    Product Rating: 5.00 Stars
    Model A Frame Assembly
    x
                

    Speedway Motors makes it easy for you to get your car rolling with our Model A frame assembly. This frame is engineered to accept our radius rod front axle and 4-bar rear suspension kits.

    • Fabricated frame rails
    • 1932 Ford front crossmember
    • Front shock mounts
    • Vega steering box mount
    • Front radius rod mounts
    • Hood hold down brackets
    • Manual brake pedal
    • Master cylinder mount
    • S/B Chevy motor mounts
    • TH350 transmission mount
    • Rear 4-bar mounts
    • Rear coil-over mounts
    • Rear panhard bar mount
    • Welded-in mounting nuts

     

    Truck Freight Shipping Charges Apply - click here for details

  • 1947-54 Chevy Pickup Truck Bolt-in Transmission Crossmember
    1947-54 Chevy Pickup Truck Bolt-in Transmission Crossmember
    x
                These new replacement transmission crossmembers are designed for use with 1947-54 Chevy Pickups and can be used with original or reproduction frame rails.  Sturdy steel construction and the versatility to accommodate most GM transmissions make these crossmembers the ideal choice for your project. 
    • For use with original or reproduction frame rails
    • Can be mounted to accommodate most GM transmissions
    • Compatible with under-floor brake pedal
  • Garage Sale - 1937-39 Chevy Car Frame Rail Mount Pedal
    Garage Sale
    Garage Sale - 1937-39 Chevy Car Frame Rail Mount Pedal
    x
                

    The bracket can be bolted or welded to the left frame rail (boxed or stock).

    916-31939 Instructions (PDF)

     

    This pedal is garage sale priced because it has been painted black, installed and returned.  This is the pedal only, what you see is what you get.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

     

  • Garage Sale - Model A Frame with 1932 Rails
    $4,299.99
    $4,699.99
    Garage Sale
    Garage Sale - Model A Frame with 1932 Rails
    x
                Please view the product's page for more information
            
  • Garage Sale - 1932 Ford Frame Assembly With 4 Bar Mounts
    Garage Sale
    Garage Sale - 1932 Ford Frame Assembly With 4 Bar Mounts
    x
                

    Order the frame and your choice of front axle and rear end options. We start with a pair of new stamped steel frame rails that are installed in a precision jig to ensure the finished frame is square and true.

    We then install the tubular center crossmember and box the frame with our exclusive "Boxed Truss" C plating system (patent pending) in the critical engine bay area. This is a feature not available anywhere else and is a Speedway Motors exclusive.

    Standard features include:

    • New stamped frame rails
    • New 1" dropped front crossmemeber
    • Exclusive "Boxed Truss" C boxing system (patent pending)
    • Front panhard bar bracket
    • Front 4-bar frame bracket
    • Front shock mounts
    • Tubular cross member
    • Brake pedal & master cylinder mount (manual or power)
    • S/B Chevy motor mounts
    • Cross member allows use of TH350, TH400 or 700R4 transmissions
    • Vega steering box mount
    • Triangulated rear 4-bar brackets
    • Upper rear shock mounts
    • Hidden rear sway bar
    Truck Freight Shipping Charges Apply - click here for details
  • Garage Sale - 1932 Ford Frame Assembly With 4 Bar Mounts
    Garage Sale
    Garage Sale - 1932 Ford Frame Assembly With 4 Bar Mounts
    x
                Please view the product's page for more information