Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy fan shroud" Page 1 of 4

  • AFCO 80163NFANZ Fan and Shroud Kit for 1955-57 Chevy
    AFCO 80163NFANZ Fan and Shroud Kit for 1955-57 Chevy
    x
                

    AFCO Fan and Shroud Kit for 1955-57 Chevy

    Fan & Shroud Combo

    • Overall Width:  20-1/4"
    • Overall Height:  17"
    • Thickness @ motor:  4-1/8"
    • Thickness @ edge of fan:  2-1/2"
    • Thickness @ edge of shroud:  1"
    • 2170 CFM
    • 17.7 amp motor 

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

     

  • Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    Walker WS55A Radiator Fan Shroud, Style D, 22 x 18 Inch
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Walker WS70 Radiator Fan Shroud, Style F, 19-1/4 x 20-1/8 Inch
    Walker WS70 Radiator Fan Shroud, Style F, 19-1/4 x 20-1/8 Inch
    x
                

    Maximize your radiators' effectiveness with a tight-fitting fan shroud. Use of these shrouds has produced temperature drops of up to 30 degrees!

    Walker shrouds are vacuum formed from a very dense polyethylene. This high-impact, heat resistant material has a lightly textured, semigloss black finish. The cooling fan hole is not cut out so the installer can tailor that to the exact fan location and diameter.

    See Application tab for application information.

    Fan Shroud Size Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Walker C-509-1 Cobra 1934-1935 Chevrolet Master Radiator
    Walker C-509-1 Cobra 1934-1935 Chevrolet Master Radiator
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. 

    Made to fit '34 Master and early '35 Master (which looks like the '34). Will not fit late '35 Master which looks like the '36 model and features a 2-piece (split) windshield, suicide doors, and a 113" wheelbase. Late '35 Masters should use the '36 radiator.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Built-in oil cooler for use with automatic transmissions

    Chevy Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 80417FANZ Fan-Shroud Combo for Radiators
    AFCO 80417FANZ Fan-Shroud Combo for Radiators
    x
                

    These fan and shroud combinations are designed to be used with AFCO radiators. Includes 16" 2180 cfm curved blade fan, aluminum shroud, and hardware. Fits 1932-34 Ford and 1937-39 Chevy applications.

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 1953-56 Ford Truck Aluminum Radiator, Chevy Engine
    AFCO 1953-56 Ford Truck Aluminum Radiator, Chevy Engine
    x
                

    If you are still running a copper radiator in your truck, you don't know what you are missing! AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Has 2 rows of 1.25" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 1935 Ford Aluminum Radiator, Chevy Engine
    AFCO 1935 Ford Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • Flanges on the side of the Radiator:  2”
    • Feet at the Base:  3”
    • Radiator has 2 rows of 1” tubes
    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    1935 Ford Radiator Installation Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1949-53 Ford Car Aluminum Radiator, Chevy Engine
    AFCO 1949-53 Ford Car Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 1937-38 Ford Aluminum Radiator, Chevy Engine
    AFCO 1937-38 Ford Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    AFCO Ford Radiator Installation Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

     

  • Cooling Components CCI-1750 Cooling Machine Electric Fan, Style 50
    Cooling Components CCI-1750 Cooling Machine Electric Fan, Style 50
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud. 12 volt. 
    • 18-1/2" wide x 22-1/4" high
    • Can be easily reduced in size to 17-1/2" wide x 21-1/8" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger fan relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 1938-1946 GM Truck Aluminum Radiator, Chevy Engine
    AFCO 1938-1946 GM Truck Aluminum Radiator, Chevy Engine
    x
                

    If you are still running a copper radiator in your truck, you don't know what you are missing. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    Fits 1938-1946 Chevrolet and GMC pickup trucks.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • Overall Height:  27"
    • Overall Width:  18"

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1939-40 Deluxe, 1940-41 Ford Truck Aluminum Radiator, Chevy Engine
    AFCO 1939-40 Deluxe, 1940-41 Ford Truck Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Has 2 rows of 1.25" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Fits:

    • 1939-40 Ford Deluxe
    • 1940 Ford
    • 1940-41 Ford Truck

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    AFCO 1923 T-Bucket Aluminum Radiator, Chevy Engine
    x
                Please view the product's page for more information
            
  • AFCO 1942-48 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1942-48 Chevy Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • Overall Height:  24"
    • Overall Width:  18-1/2"

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1938 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1938 Chevy Aluminum Radiator, Chevy Engine
    x
                When it comes to the cooling performance of these  radiators, they are second to none. AFCO Aluminum radiators allow your  car to remain at a constant temperature, which means that power delivery  is more consistent. The uniformity of an all-aluminum construction  radiator allows for the best pound for pound heat transfer  characteristics.

    For 1938 Chevrolet passenger cars.
    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

       
    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 1947-55 Chevy Truck Aluminum Radiator, Chevy Engine
    AFCO 1947-55 Chevy Truck Aluminum Radiator, Chevy Engine
    x
                

    If you are still running a copper radiator in your truck, you don't know what you are missing! AFCO uses the technology they learned from the racing world to give your truck the best radiator it will ever have. 100% Tig welded and each one is pressure tested.

    • 100% Aluminum Construction (no epoxy)
    • Welded-in Mounting Tabs
    • Filler necks feature screw-in bleed - won't crack or leak with age
    • Correct center-to-center inlets/outlets makes installation a breeze
    • Overall Height:  27-1/4" plus the fill neck
    • Overall Radiator Width:  18-1/4" plus the flanges
    • The flanges run vertically the entire length of the core

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO Direct Fit 1962-67 Chevy II Nova Radiators, Crossflow
    AFCO Direct Fit 1962-67 Chevy II Nova Radiators, Crossflow
    x
                

    The '62-'67 Nova continues to be the choice of many car builders today for their ability to achieve high horsepower-to-weight ratios. AFCO designed these cross-flow conversion radiators for increased cooling and easier engine swaps. It bolts into the stock mounting hole locations for simple installation. No cutting or drilling is required.

    • Built-in mounting brackets w/ pre-drilled holes
    • Factory fan shroud provisions
    • Inlets and outlets are factory-style and in stock locations
    • Billet filler neck offers strength and higher quality appearance over stamped
    • Inlets and outlets are positioned correctly for ease of flow
    • 100% aluminum construction (no epoxy)
    • Furnace brazed core - 2 rows of 1" tubes
    • TIG welded by skilled craftsmen in the USA

    Note: The 6-Cylinder shroud will not fit with the bracket assembly on this radiator.

    Instructions (PDF) 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO Direct Fit 1962-67 Chevy II Nova Radiators, Downflow
    AFCO Direct Fit 1962-67 Chevy II Nova Radiators, Downflow
    x
                

    The '62-'67 Nova continues to be the choice of many car builders today for their ability to achieve high horsepower-to-weight ratios. AFCO designed these OEM-style vertical core radiators to maintain the OEM styling, while gaining increased cooling capacity. It bolts into the stock mounting hole locations for simple installation. No cutting or drilling is required.

    • Built-in mounting brackets w/ pre-drilled holes
    • Factory fan shroud provisions
    • Inlets and outlets are factory-style and in stock locations
    • Billet filler neck offers strength and higher quality appearance over stamped
    • Inlets and outlets are positioned correctly for ease of flow
    • 100% aluminum construction (no epoxy)
    • Furnace brazed core - 2 rows of 1" tubes
    • TIG welded by skilled craftsmen in the USA

    Note: Use 1966-67 thermostat housing and upper hose. The 6-Cylinder shroud will not fit with the bracket assembly on this radiator.

    Instructions (PDF) 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Cooling Components CCI-1740 Cooling Machine Electric Fan, Style 40
    Cooling Components CCI-1740 Cooling Machine Electric Fan, Style 40
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 24.44" wide x 19" high
    • Can be easily reduced in size to 21-5/8" wide x 17-1/4" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger fan relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 1936 Ford Aluminum Radiator, Chevy Engine
    AFCO 1936 Ford Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1942-48 Ford Aluminum Radiator, Chevy Engine
    AFCO 1942-48 Ford Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Has 2 rows of 1.00" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1937 and 1939 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1937 and 1939 Chevy Aluminum Radiator, Chevy Engine
    x
                Please view the product's page for more information
            
  • Cooling Components CCI-1770 Cooling Machine Electric Fan, Style 70
    Cooling Components CCI-1770 Cooling Machine Electric Fan, Style 70
    x
                At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.
    • 20.44" wide x 20.5" high
    • Can be easily reduced in size to 19.88" wide x 18.5" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan motor requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • Cooling Components CCI-1790 Cooling Machine Electric Fan, Style 90
    Cooling Components CCI-1790 Cooling Machine Electric Fan, Style 90
    x
                

    At one time or another we all have had a car overheat. These fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.

    • 26" wide x 18.31" high
    • Can be easily reduced in size to 23" wide x 18" high
    • 12 volt operation
    • Lower engine operating temperatures
    • Saves horsepower
    • Better fuel mileage
    • Constructed of high-impact ABS material

    Note:  This fan requires the use of a 70 amp or larger relay.

    Fan Application Chart (GIF)

    Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.

  • AFCO 1933-34 Ford Car Aluminum Radiator, Chevy Engine
    AFCO 1933-34 Ford Car Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • 17” Core Width
    • 3”Core Thickness
    • 27” Overall Height (from bottom of bottom tank to top of top tank)
    • 20.25" Overall Width
    • 5° Layback

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Walker Z-AC514-1 Z-Series 1954 Chevy Pick-Up Radiator w/ A/C Condenser
    Walker Z-AC514-1 Z-Series 1954 Chevy Pick-Up Radiator w/ A/C Condenser
    x
                

    We offer Walker Z-Series radiators for 1947-59 Chevy pick-ups with or without air conditioner condenser. They have the top neck centered while the lower is on the right.

    1947-1954 use 820-70 fan shroud. 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker Z-AC495-1 Z-Series 37-39 Ford Radiator & Condenser-Chevy Engine
    Walker Z-AC495-1 Z-Series 37-39 Ford Radiator & Condenser-Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Use Walker Fan Shroud Style E

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • Walker Z-Ac498-1 Z-Series 33-34 Ford Radiator & Condenser-Chevy Engine
    Walker Z-Ac498-1 Z-Series 33-34 Ford Radiator & Condenser-Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Works with original, reproduction, steel or fiberglass grille shells
    • 4-row copper core w/ brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Use Walker Fan Shroud Style B

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance



  • Walker Z-Ac494-1 Z-Series 36 Ford Radiator & AC Condenser-Chevy Engine
    Walker Z-Ac494-1 Z-Series 36 Ford Radiator & AC Condenser-Chevy Engine
    x
                Please view the product's page for more information
            
  • Walker Z-Ac488-1 Z-Series 35 Ford Radiator & AC Condenser-Chevy Engine
    Walker Z-Ac488-1 Z-Series 35 Ford Radiator & AC Condenser-Chevy Engine
    x
                Please view the product's page for more information
            
  • Walker Z-514-1 Z-Series 1954 Chevy Pick-Up Radiator
    Walker Z-514-1 Z-Series 1954 Chevy Pick-Up Radiator
    x
                

    We offer Walker Z-Series radiators for 1947-59 Chevy pick-ups with or without air conditioner condenser. They have the top neck centered while the lower is on the right.

    1947-1954 use 820-70 fan shroud. 

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM
    AFCO 80127NP Universal Fit Aluminum Radiator, 24-1/4 x 19 Inch, GM
    x
                

    These AFCO Universal Fit Aluminum Crossflow Radiators use all the same technology that their Direct fit radiators do, but they do not have application specific mounting flanges and tabs. So if you are building something a little different or just want to save some cash these will fit the bill. We also have electric fan/shroud combos for these radiators listed.

    All measurements include the end tanks. Overall width includes mountings flanges if used.

    • 1-1/2" upper hose neck on the drivers side
    • 1-3/4" lower hose neck on the passenger side
    • 1/4" NPT brass drain cocks
    • Welded-on 2" wide side mount flanges on most models
    • Built-in fin covers on top and bottom of radiator
    • Do not have built-in transmission coolers
    • 10680103NP: 1960-1968 Chevy Fullsize with 22 3/8" Core - Crossflow

    Instructions (PDF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  

  • AFCO 1949-54 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1949-54 Chevy Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • AFCO 1955-59 Chevy Truck Aluminum Radiator, Chevy Engine
    AFCO 1955-59 Chevy Truck Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Walker C-497-1 1939 DL/1940 All/1941 PU Ford Cobra Radiator Chevy
    Walker C-497-1 1939 DL/1940 All/1941 PU Ford Cobra Radiator Chevy
    x
                Please view the product's page for more information
            
  • Walker Z-AC497-1 Z-Series 39 DL/40-41 Ford PU Rad/Condser Chevy Engine
    Walker Z-AC497-1 Z-Series 39 DL/40-41 Ford PU Rad/Condser Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Works with original, reproduction steel, and fiberglass grille shells
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install
    • Use Walker Fan Shroud Style A

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  


  • AFCO 1955-56 Chevy Aluminum Radiator, Chevy Engine
    AFCO 1955-56 Chevy Aluminum Radiator, Chevy Engine
    x
                

    When it comes to the cooling performance of these radiators, they are second to none. AFCO Aluminum radiators allow your car to remain at a constant temperature, which means that power delivery is more consistent. The uniformity of an all-aluminum construction radiator allows for the best pound for pound heat transfer characteristics.

    • 100% Aluminum construction (no epoxy)
    • Furnace brazed core
    • 2 rows of 1.00" tubes
    • Tanks are made of .080” 3003 aluminum for strength and durability
    • TIG welded by skilled craftsmen in the USA
    • Factory pressure-tested
    • Filler necks feature screw-in bleed – won't crack or leak with age
    • Side brackets are reverseable for mounting fore or aft of the core support

    Instructions (PDF)

    NOTE: Due to the modified nature of these vehicles, some radiators will require a minimum of drilling, etc. to mount.

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance

  • Walker C-Ac497-1 Cobra Ford 39 DL, 40-41 PU Rad/Condenser Chevy Engine
    Walker C-Ac497-1 Cobra Ford 39 DL, 40-41 PU Rad/Condenser Chevy Engine
    x
                Please view the product's page for more information
            
  • Walker C-494-1 Cobra 1936 Ford Radiator for Chevy Engine
    Walker C-494-1 Cobra 1936 Ford Radiator for Chevy Engine
    x
                

    Walker Cobra Series radiators boast a relatively thin, but efficient, high-flow copper core which is ideal for use with mild Small Block engines with stock or low compression ratios. Each radiator is built for a direct fit with heavy gauge steel side brackets and standard mounting holes pre-stamped. Plus, all radiators feature a built-in oil cooler for use with automatic transmissions. They work with original, reproduction, steel or fiberglass grille shells.

    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 17 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install w/ no modifications to grille or grille shell
    • Use Walker Fan Shroud Style B

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  
  • Walker Z-488-1 Z-Series 1935 Ford Radiator for Chevy Engine
    Walker Z-488-1 Z-Series 1935 Ford Radiator for Chevy Engine
    x
                

    Walker Z-Series radiators feature a 4-row, high-flow copper core which is ideal for use with Big Blocks, blowers, and high compression engines. Built for a direct fit with heavy gauge steel side brackets and mounting holes pre-stamped. Includes a built-in oil cooler for automatic transmissions.

    • Works with original, reproduction, steel or fiberglass grille shells
    • Copper core w/ 1-piece brass tanks
    • Vertical tubes every 1/4" and 12 fins per inch of height
    • Heavy duty 12 Ga. steel side brackets w/ pre-drilled holes
    • Use a 15-18 lb. radiator cap
    • Brass drain cock
    • Simple bolt-in install
    • Use Walker Fan Shroud Style B

    Ford Chassis W/ Chevy Engine Application Chart (GIF)

    Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   

Goto Previous PagePrevious Page
1 2 3 4