Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy big" Page 1 of 24

  • Aluminum Heat Shields for Chevy Mini Starters
    Aluminum Heat Shields for Chevy Mini Starters
    x
                

    Aluminum heat shields are a must for any Chevy race engine. Prevents the heat of your exhaust from cooking the starter and solenoid. Easy to install.

    Cover fits Speedway starter motors # 91067440 and 91067439.

  • Chevy V8 Oil Restrictor Kit
    $7.99
    Chevy V8 Oil Restrictor Kit
    x
                

    Available for either roller or solid lifter cams. Reduces oil flow to upper end of engine (lifters, pushrods, rockers, springs). As a result, it increases percentage of oil directed to bearings. Restrictors screw into the two lifter lube holes in the back of the engine, replacing the two stock pipe plugs.

    Designed for use with solid flat tappet or roller lifter cams. Fits both S/B and B/B Chevy.

    Note: NOT for use with hydraulic lifters.

  • McLeod 8653 Explosion-Proof GM Bellhousing
    McLeod 8653 Explosion-Proof GM Bellhousing
    x
                

    Explosion proof bellhousing for Chevy, Olds, Buick and Pontiac. Dual starter pockets, places starter either side of engine. Works with standard mechanical linkage, cable linkage or hydraulic linkage.

    • Required by IMCA
    • Not SFI rated
    • Accepts Saginaw, Muncie, T-10, T-50, and T-5 trans w/ 17 degree rotated pattern

    Bellhousing will fit Chevy V8 (1962-1992), some Chevy V6 (1962-1992), Oldsmobile and Pontiac V8 (1964-1992), and Buick V8 (1967-1980).

    Hole in center will not fit some Saginaw transmissions out of trucks which have a larger nose flange. You'll need a different flange or machine your current one.

  • EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    EngineQuest OFA305 Chevy Oil Filter Adapter w/ Bypass
    x
                

    This is a stock adapter with a bypass built into it. Replacement for stock oil filter adapter. Fits Small Block Chevy, Big Block Chevy, and early model 4.3L V6. Replaces GM part number 3952301. Includes two 5/16"-18 x 1" socket head cap screws.

    Bolts directly to the block without a gasket.

  • Chevy 45 Degree Pivoting Aluminum Water Neck
    Chevy 45 Degree Pivoting Aluminum Water Neck
    x
                

    Pivoting water neck is die-cast, polished aluminum. This O-ring sealed water neck rises at a 45° angle and can be rotated for best possible radiator hose access. Fits all Chevy V8's 1955-86 and accepts normal GM thermostats and 1-1⁄2" I.D. hoses. Includes hardware.

    Bolt hole dimension is approximately 3-1/4" center to center.

  • Big Block Chevy Header Kit
    $145.99
    Product Rating: 5.00 Stars
    Big Block Chevy Header Kit
    x
                These B/B Chevy (BBC) headers feature 18 gauge mild steel designed for many racing and rodding applications. Cutting, fitting and welding required.  Has a 2" tube and 3-1/2" collector.

    Kit includes eight mandrel-bent primary tubes,  two pre-formed collectors, two extra-thick oval port flanges, two gaskets and twelve header bolts.
  • Trans-Dapt 1322 Oil Cooler Block Adapter
    Trans-Dapt 1322 Oil Cooler Block Adapter
    x
                

    Fits 13/16"-16 threads. Designed to fit most small and big block Chevy V8's with recessed filter landing.

    • 2-1/8" thick
    • 1/2" NPT ports
    • (1) qty. 1/4" O-ring
    • Mounts oil filter with 13/16"-16 threads
  • Moroso 62190 11 Inch Degree Wheel
    Moroso 62190 11 Inch Degree Wheel
    x
                

    11" diameter. Heavy gauge aluminum discs calibrated in 1° increments for determining precise valve, cam and ignition timing. 11" degree wheel works with crank socket.

    • These degree wheels are mandatory for professional engine builders
    • Accurately measures several timing functions of an engine: camshaft centerline, valve timing, TDC, BDC, etc.
    • Marked in easy-to-read one degree increments
    • Made from heavy gauge metal with a silk screen finish for long-lasting use
    • Adapter included to fit virtually any engine
    • For mounting either wheel, use Crankshaft Socket Nos. 61755 or No. 61756 for Small and Big Block Chevys, and No. 61757 for LS Series Engines with keyway

     

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • High temp black paint finish
    • Includes bolts and gaskets
    • Note: This header actually goes upward from the head instead of down before dropping over the frame rails. From the top of the head flange to the top of the tubes is approximately 9-1/2". 

    Header Dimensions (GIF)

  • 3-Bolt Chevy Rubber Motor Mounts for 90 Degree V6, Small Block/Big Block V8
    3-Bolt Chevy Rubber Motor Mounts for 90 Degree V6, Small Block/Big Block V8
    x
                

    These 3-bolt S/B Chevy rubber motor mounts are manufactured to meet or exceed OEM specifications. Fits most 1958-73 Chevy passenger cars with small block V8. Sold as a pair.

    • Unique rubber formula provides good abrasion resistance and aging stability
    • Ensures maximum life and performance
    • Application-specific Durometer (hardness) based on engine weight & torque
    • Special Chemlock® bonding agent ensures superior rubber-to-metal bond
  • Fel-Pro Gaskets 2904 Big Block Chevy Rear Main Bearing Seal
    Fel-Pro Gaskets 2904 Big Block Chevy Rear Main Bearing Seal
    x
                Blue Stripe premium quality rear main seals for BB Chevy 396-454 V-8.
            
  • Speedway Manifold Filler Neck
    Speedway Manifold Filler Neck
    x
                

    This neck allows you to fill your cooling system at the intake manifold if you radiator is lower than the intake. It can be flipped over for RH or LH upper hoses, and has two 1/4" npt and one 1/2" npt hole in the back for bypass lines or sending units. Fill cap plate has a 7/16" pipe nipple welded into the overflow area.

    Fits Small Block or Big Block Chevy V8.

  • Replacement Pilot Bushing, Chevy Engine to Ford Trans
    Replacement Pilot Bushing, Chevy Engine to Ford Trans
    x
                

    Replacement pilot bushing for use with adapter 720-0392 for Chevy V8/V6 engines to Ford (1932-1948), Mercury (1939-1950), and Ford pick-up truck (1932-1952) transmissions.

    • Adapts Ford transmission to Chevy crankshaft
    • 1.093" O.D.
    • .671" I.D.
    • 1.45" long
  • ARP Fasteners 200-1401 Chevy Timing Cover Studs
    ARP Fasteners 200-1401 Chevy Timing Cover Studs
    x
                Includes all hardware. 170,000 PSI studs.  
    All Chevy V8, 1/4" stud kit.
  • Chevy Extra Long Hollow Dowel Pins
    Chevy Extra Long Hollow Dowel Pins
    x
                

    If you are running a motor plate, you need a set of these extra long bellhousing dowel pins. Made of steel to fit S/B and B/B Chevy.

  • O-Ring Kit for Hy-Lube Chevy Oil Filter Adapter
    O-Ring Kit for Hy-Lube Chevy Oil Filter Adapter
    x
                

    Replacement O-ring seal kit for Hy-Lube remote oil filter block adapter #205-9910. Includes 2 bolts with washers and O-rings.

  • Chevy Weld-In Motor Mounts
    $79.99
    Product Rating: 4.10 Stars
    Chevy Weld-In Motor Mounts
    x
                

    More often than not, we are trying to put an engine in something that no one has built bolt-in mounts for. If that's your story, we have just the deal for you! This S/B Chevy and B/B Chevy motor mount has a poly bushing in it giving you a vibration free installation.

    This mount will use replacement bushing 916-34545.

    Welding and fitting required.

  • Mr Gasket 1591 Timing Tape, 8 Inch Balancer
    Mr Gasket 1591 Timing Tape, 8 Inch Balancer
    x
                A convenient way to avoid the expense of having the harmonic balancer degreed. This timing tape is precisely accurate in calibration. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer. For S/B & B/B Chevy V8 engines.
            
  • Speedway Chevy Mini Starter, 1.4 kW, Plain
    Speedway Chevy Mini Starter, 1.4 kW, Plain
    x
                High-torque, 1-1/2 HP high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines. 

    Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. 

    910-67440 Instructions (PDF)

  • Chevy Mini Starter Shim & Bolt Set
    Chevy Mini Starter Shim & Bolt Set
    x
                Set includes 3-3/4" long bolts with shims for Chevy mini starters with straight bolt pattern (not angled).
            
  • Ram Clutches BU656K Kevlar Pilot Bushing, S/B and B/B Chevy
    Ram Clutches BU656K Kevlar Pilot Bushing, S/B and B/B Chevy
    x
                

    This replacement 1955-04 SB/BB Chevy pilot bushing is CNC machined from a Nylon/Kevlar composite that has a wear life five times longer than steel and prevents input shaft scoring.

    Even better, it does not require grease, which eliminates the possibility of contaminating the clutch.

    • .598" I.D.
    • 1.105" O.D. 
  • K&N Filters HP3002 Performance Oil Filter, Chevy
    K&N Filters HP3002 Performance Oil Filter, Chevy
    x
                

    These filters feature thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. Comes with a 1” nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. Plus, the filter media is unaffected by racing gas, methanol and nitromethane fuels.

    • Thicker shell provides 550 psi burst strength
    • Withstands higer oil pressures
    • 12 gpm flow
    • 1 quart capacity
    • Drilled for safety wire attachment

    HP-3002 Cross Reference (Link)

  • Offenhauser Finned Oil Filter Cover, Polished Aluminum
    Offenhauser Finned Oil Filter Cover, Polished Aluminum
    x
                

    This finned aluminum cover slides over a stock filter to add a little something extra to your engine compartment. A slit on one side has an allen head cross bolt that clamps the cover onto the oil filter (similar to a hose clamp).

    Fits most standard-sized filters on Ford,GM, and Chrysler vehicles (full-sized V8s). Vertical fins on one side only.

    • Polished aluminum 
    • Finned style
    • Works with stock oil filter
    • Attaches with cross bolt clamp
    • Standard V8 Ford, GM, Chrysler
  • Speedway Chevy Starter Replacement Drive
    Speedway Chevy Starter Replacement Drive
    x
                Replacement drive mechanism for Speedway Chevy Starter 910-66300.
            
  • Chevy Distributor Clamp
    $6.99
    Product Rating: 4.50 Stars
    Chevy Distributor Clamp
    x
                Extra heavy duty distributor clamp. Gives more hold-down area for your Small Block Chevy (SBC) or Big Block Chevy (BBC). 
            
  • Big Block Chevy Balancing Plate
    Big Block Chevy Balancing Plate
    x
                

    Lets you balance your Big Block Chevy 454 engine with a 350 flywheel (manual transmission flywheel or automatic transmission flex plate) and a bolt-on balancing plate.

    • Allows use of lighter 350 flywheel to rev quicker
    • Fits between the crankshaft and flexplate
    • Correctly balances the engine without resorting to a big heavy flywheel
    • Precision stamped steel plate
    • Road and race tested

    Note: The weight welded to this plate is positioned to the block side of the plate.

  • Water Outlet Restrictor Kit
    $5.99
    Product Rating: 3.00 Stars
    Water Outlet Restrictor Kit
    x
                Fits all GM V8s, V6s, and small block Fords. Three aluminum water outlet restric plates with 5/8", 3/4" and 1" diameter holes. 
            
  • Chevy Steel Frame Mounts
    $29.99
    Chevy Steel Frame Mounts
    x
                

    If your race vehicle reqires rigid motor mounts, our solid steel mounts won't let you down. These frame brackets are designed to be used with our steel motor mounts 545-62515. Fits both Small Block and Big Block Chevy.

    Same as factory frame brackets from '74-'81 Camaro, '73-'88 Malibu/Monte Carlo/El Camino, '73-'79 Nova, and '76-'90 Impala/Caprice.

  • Moroso 26150 Chevy Distributor Shim Kit
    Moroso 26150 Chevy Distributor Shim Kit
    x
                

    Eliminates oil pump bind and spark scatter when using a distributor in an engine with milled heads or decks. Shims fit between the intake manifold and your distributor allowing you to properly set gear mesh. Made from leak-free, high impact nylon.

    • Eliminates oil pump bind and spark scatter 
    • Prevents wiping out your distributor gear
    • Made from high impact nylon to exact GM gasket specs
    • Kit contains 3 sizes; .030", .060" & .100"
  • AFCO 80312-15 Chevy Aluminum Thermostat Housing, 15 Degree Neck
    AFCO 80312-15 Chevy Aluminum Thermostat Housing, 15 Degree Neck
    x
                

    These thermostat housings are die-cast, polished aluminum. The O-ring sealed water neck rises at a 15° angle and can be rotated 360° for best possible radiator hose access. Includes hardware. 

    Fits all Chevy V8's 1955-86, and accepts normal GM thermostats and 1-1⁄2" I.D. hoses.

  • Chevy Blueprinted HEI Distributor
    $69.99
    $99.99
    Product Rating: 4.90 Stars
    Chevy Blueprinted HEI Distributor
    x
                

    This HEI distributor for S/B and B/B Chevy non-computer controlled engines features a...

    • 4-pin ignition module rated to 7500 rpm
    • Premium cap with brass terminals
    • High output coil (50,000 volt spark through 7,500 rpm) 
    • 4340 chromoly steel bottom gear, for use with cast and steel billet cams 
    • Mechanical advance
    • Adjustable vacuum advance to improve economy while cruising
    • High performance rotor
    • Coil cover
    • Fully CNC machined, polished housing
    • True spark alignment for instant response at high RPM
    • Performance style advance curve built in

    910-12342 Instructions (PDF)

  • Book/Manual - How to Build Max-Performance Chevy Big Blocks on a Budget
    Book/Manual - How to Build Max-Performance Chevy Big Blocks on a Budget
    x
                The Chevy big-block set an illustrious record  in stock car racing and powered some of the fastest and most exclusive  Chevy muscle cars of the 1960s and 1970s, such as the Chevelle,  Corvette, and Camaro. As a result the Chevy big block became as iconic  as the cars it powered. But building a Chevy big-block can be a very  expensive endeavor and many different aspects require attention to  attain maximum performance on a reasonable budget. In How to Build  Max-Performance Chevy Big-Blocks on a Budget, master engine builder and  veteran author David Vizard imparts his 50 years of engine building  experience and unique insight, so the reader can invest wisely and build  a maximum-performance Chevy big-block. Like Vizard's top-selling book  How to Build Max-Performance Chevy Small-Blocks on a Budget, readers are  shown how to get the optimal machining performed, select the ideal  parts, and assemble the strongest engine package for a budget of $1,900  to $15,000. This engine building book offers a practical, methodical, and revealing  approach for disassembly, machining, preparation, modification, and  assembly of a big-block Chevy. Vizard thoroughly explains how to obtain  maximum performance on a budget and includes eight affordable and  powerful engine builds in every price range. Any enthusiast with a  big-block Chevy can benefit greatly from the experience and knowledge  that best-selling author Vizard provides, making this engine building book a welcome  additio
            
  • PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
    PerTronix 1181 Ignitor Points Eliminator Kit, 1957-74 GM V8
    x
                

    Never change points again with the PerTronix Ignitor points conversion kit. It provides increased voltage for improved performance and fuel efficiency. The system completely eliminates the contact points and fits neatly underneath the distributor cap for a "stock" look. Compatible with all 12 volt negative ground systems.

    PerTronix Ignitor Systems can be used with any stock point-type coil, or use the Flame-Thrower 40,000 volt coil for maximum performance. Also compatible with MSD ignition boxes.

    • Delivers 2x the voltage to the plugs for more power and MPG
    • 2:1 improvement over points in current fall time, increasing coil output
    • Hall Effect Trigger with no moving parts
    • Epoxy molding makes module impervious to contamination
    • Fits entirely inside distributor for a clean, stock look
    • Stable timing - no adjustment needed
    • Will trigger most multi-spark CD ignitions
    • Easy installation

    Ignitor Points Eliminator Installation Instructions (PDF)

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. These headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers. Plus, the AHC ceramic coating provides additional horsepower gains along with decreased heat soak of other engine components.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Polished ceramic coated finish
    • Includes bolts and gaskets

    Header Dimensions

  • S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    S/B, B/B or 90 Degree V6 Chevy Crossmember Mount
    x
                

    Mount a Chevy engine in almost any frame up to 39" wide. Heavy wall 1-3/4" tubing, MIG welded. Comes with ends for bolt-in or weld-in applications.

    • Maximum working width: 39"
    • Minimum working width: 21"
    • 5.50" center drop

    Use with 1964-1967 Chevy-style mounts 91018012 (rubber) or 91018015 (polyurethane).

  • Speedway Chevy Lightweight Starter, 1.0 kW
    Speedway Chevy Lightweight Starter, 1.0 kW
    x
                

    Feather light, but built to last! Unique gear reduction design is compact but can be rotated 360° and works with 153 and 168 tooth flywheels. Fits Chevy with straight bolt pattern.

    • Weighs 7-1/2" lbs
    • Up to 10:1 compression
    • Includes mounting bolts shims
    • 3" diameter motor
  • Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    Speedway 1955-57 Chevy Car V8 Motor Mount Kit
    x
                

    Side-mount motor mounts are a more rugged mount design than the original front mounts found on your Tri-Five Chevy, plus they allow more room for front drive accessories. Our motor mount kit allows you to side-mount 1958-up S/B Chevy 283-400 c.i. V-8 engines into your 1955, 1956, or 1957 Chevy passenger car.  Will also work on 396-454 big block engines.

    Includes frame brackets, engine brackets, rubber mount cushions, hardware, and instructions.

    1955-1957 Chevy Bolt-In Motor Mount Installation Instructions

  • Chevy Solid Motor Mounts
    $14.99
    Chevy Solid Motor Mounts
    x
                

    Steel mounts prevent twist during hard accelerations. Replaces stock upper mounts. Measures 1-11/16" high, 2-1/2" wide.

  • MSD 8416 GM HEI Distributor Cap and Rotor
    MSD 8416 GM HEI Distributor Cap and Rotor
    x
                

    The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits

  • Clevite P-Series Big Block Chevy Main Bearings
    Clevite P-Series Big Block Chevy Main Bearings
    x
                

    Clevite main bearings feature Tri-Metal construction - soft lead alloy outer layer, copper-lead center and steel backing. Available in STD, .001", .010", .020", and .030".

    Sold in complete sets.

Goto Previous PagePrevious Page
1 2 3 4 5 ... 24