Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy bearing seal kit" Page 1 of 4

  • Bearing-Seal Kit for Two Mustang II Brake Rotors
    Bearing-Seal Kit for Two Mustang II Brake Rotors
    x
                

    This bearing and seal kit includes two inner wheel bearings, two outer wheel bearings and two inner grease seals. This kit is enough for two brake rotors and is intended to be used with a new rotor installation as this kit does not include the bearing races or cups.

    If your project willl be making use of used rotors, you will require new bearing races or cups.  Therefore you will need to purchase the bearing and seal kit # 910-31052 suggested below in place of kit # 910-31000.

    Works with Mustang II/Pinto and Granada rotors using Mustang II/Pinto spindles only. It will not work for installing Mustang II/Pinto brake rotors on 1949-1954 Chevy spindles. Not for use with early Chevy spindle brake conversion kits.

    -Large Bearing-
    Thickness: .656"
    Upper OD: 1.900"
    Lower OD: 2.150"
    Bearing ID: 1.375"

    -Small Bearing-
    Thickness: .651"
    Upper OD: 1.380"
    Lower OD: 1.570"
    Bearing ID: 0.864"

    Never install new hubs with old bearings.

  • 1955-57 Chevy Bearing & Seal Kit for 1969-72 Rotors
    1955-57 Chevy Bearing & Seal Kit for 1969-72 Rotors
    x
                

    Wheel bearing and seal kit for mounting '69-'72 GM Midsize 11" rotors to original Tri Five Chevy spindles. Use with your rotors, calipers, and brackets. Kit includes inner and outer front wheel bearings, races and seals.

    Note: Won't work with stock '55-'57 drum brakes.

  • Fel-Pro Gaskets 2904 Big Block Chevy Rear Main Bearing Seal
    Fel-Pro Gaskets 2904 Big Block Chevy Rear Main Bearing Seal
    x
                Blue Stripe premium quality rear main seals for BB Chevy 396-454 V-8.
            
  • Bearing & Seal Kit for Brake Kit 910-31953
    Bearing & Seal Kit for Brake Kit 910-31953
    x
                Bearing & seal kit for GM 1969-77 Midsize to 1949-54 Chevy car or 1941-59 Chevy pick-up spindle brake kit part number 910-31953 and 910-31954. 

    Kit Includes:

    • Seals
    • Tapered inner bearing
    • Tapered outer bearing cones
    • Tapered outer bearing cups
  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Bearing & Seal Kit for Brake Kit 910-31954
    Bearing & Seal Kit for Brake Kit 910-31954
    x
                Bearing & seal kit for GM Midsize 11" brakes/1949-54 Chevy car or 1941-59 Chevy pickup spindle brake kit.   

    Kit Includes:

    • Seals
    • Tapered inner bearing
    • Tapered outer bearing cones
    • Tapered outer bearing cups
  • Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    Brake Kit: 1969-77 GM Caliper to Early Ford Spindles, Chevy B-P
    x
                GM bolt pattern 5 on 4-3/4"

    Easily installs 11" rotors and 1969-77 mid-size GM single piston calipers to your 1937-48 Ford passenger car spindles. No machine work needed.

    Kit Includes:
  • New 11" brake rotor, 5 x 4-3/4"
  • Semi-metallic brake pads
  • GM Caliper slide bolts
  • Rebuilt 1969-77 calipers (7/16"-20 inlets)
  • 1973-77 GM brake brackets
  • 1973-77 hardware
  • New bearing and seal adapters
  • Seals
  • Inner bearing cups
  • Rubber Brake Lines
  • Inner bearing cones
  • Spacers
  • Outer bearing cones
  • Seals
  • Bolt kit for flat steering arm
  • Dust caps
  • Instructions
  • Not for use with bolt-on steering arms.  The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However these kits are much too large and heavy for a T-bucket or earlier roadster.

    910-31941 Instructions (pdf)

  • Bearing & Seal Kit for Brake Kit 910-31955
    Bearing & Seal Kit for Brake Kit 910-31955
    x
                Bearing & seal kit for GM Metric calipers & Mustang II rotors to 1949-54 Chevy spindle brake kit part 910-31955  &  910-31956. 

    Kit Includes:

    • Seals
    • Tapered inner bearing
    • Tapered outer bearing cones
    • Tapered outer bearing cups
  • Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    Economy Bolt-On Front/Rear Brake Kit for Chevy Spindle
    x
                

    Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '49-'54 Chevy style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.

    Chevy Spindle Brake Kit Instructions (PDF) 

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 2-Piston, Steel Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 2-Piston, Steel Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, solid steel rotors, 2-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Billet Dynapro two-piston calipers - black finish
    • Poly E brake pads
    • .35" wide x 10-3/4" diameter solid rotors - black finish
    • Caliper has a 1/8" NPT inlet

    835-140150 Instructions (PDF)

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Steel Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Steel Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, solid steel rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .35" wide x 10-3/4" diameter solid steel rotors - black finish
    • Caliper has a 1/8" NPT inlet

    835-140151 Instructions (PDF)

  • Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    Wilwood Disc Brake Kit for 1949-54 Chevy Spindles, 4-Piston, Vented Rotor
    x
                

    Check out this complete brake package for '49-'54 Chevy car spindles. These kits feature aluminum hubs, vented iron rotors, 4-piston aluminum calipers, bearings, seals, steel brackets, and all necessary hardware. Hubs are drilled for both 5 x 4.5" and 5 x 4.75" bolt patterns.

    • Forged Dynalite four-piston calipers - black finish
    • Polymatrix D brake pads
    • .810" wide x 10-3/4" diameter Ultralite HP 30 Vane rotors - plain finish
    • Caliper has a 1/8" NPT inlet

    835-140152 Instructions (PDF)

  • Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    Mustang II Brake Kits for Early Chevy Spindles, GM 4.75 Pattern
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto 9-1/4" rotors and calipers onto your machined Chevy 1949-54 car spindles.

    Kit features:

    • 9-1/4" brake rotor, 5 x 4-3/4" wheel bolt pattern
    • Remanufactured Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, hardware and instructions included

    Note:

    • Will not work with traditional style steering (no room for upper steering arm).
    • Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.
    • For use only on street rod tube or I-beam front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends.

    910-31948 Instructions (PDF)

  • Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    Mustang II Disc Brake Kit for Early Chevy Spindles, 5 on 4-1/2 Inch
    x
                

    This complete brake and hub kit is designed to install 1974-80 Mustang II/Pinto rotors and calipers onto your machined Chevy 1949-54 car spindles. Disc brake kit is desigend for use only on street rod tube front axles when using 1949-54 Chevy style spindles intended for Model T and Model A to 1936 Ford front ends. This kit includes two 9-1/4" rotors with a Ford bolt pattern.

    • 9-1/4" brake rotor, 5 x 4-1/2" wheel bolt pattern
    • Pinto/Mustang iron calipers, 7/16"-24 inlet
    • 16" rubber brake lines
    • Zinc plated dust caps
    • All necessary brackets, adapters, bearings, seals, and hardware
    • Instructions included

    Note: Will not work with traditional style steering (no room for upper steering arm). Will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends.

    910-31947 Instructions (PDF)

  • 1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1963-1966 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

  • 1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    1967-1970 Chevy 1/2 Ton Pickup Front Disc Brake Conversion Kit
    x
                

    This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passenger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles.

    Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.

    Only for 1/2 ton trucks 

    Rotor Diameter:  11"
    Caliper Piston Diameter:  2.8"
    Caliper Inlet:  7/16"-20
    Booster Type:  Single Diaphragm (Stock Type) 
    Booster Diameter:  11"
    Proportioning Valve Type:  Disc Front/Drum Rear
    Proportioning Valve Ports:  3/8"-24 Front, 9/16"-18 Rear
    Recommended Brake Line:  3/16" Steel 

  • Forged Small Block Chevy Rotating Assembly, 350 Flat Top, H-Beam, 5.7 Rods
    Forged Small Block Chevy Rotating Assembly, 350 Flat Top, H-Beam, 5.7 Rods
    x
                Please view the product's page for more information
            
  • Premium Small Block Chevy Rotating Assembly, 350 Flat Top, 5.7 Inch Rods
    Premium Small Block Chevy Rotating Assembly, 350 Flat Top, 5.7 Inch Rods
    x
                Please view the product's page for more information
            
  • 1958-1964 Chevy Disc Brake Kit for Drop Spindles
    1958-1964 Chevy Disc Brake Kit for Drop Spindles
    x
                

    Speedway offers this complete disc brake kit for 1958-64 Chevy cars with our 2" drop spindles (910-34910 at right). The brake kit uses common midsize calipers and 12" rotors with a 5 on 4-3/4" bolt pattern. Brake kit will not fit stock spindles. Calipers have 7/16"-20 inlets.

    Kit includes:

    • Street brake pads
    • 12" brake rotors
    • GM '69-'77 mid-size single piston iron calipers
    • Caliper slide bolts
    • Rubber brake Lines
    • Bearings & Seals
    • Spindle nut kit 

    Note: Increases track width .100" per side for a total track width increase of .200" hub to hub when compared to the OEM drum brake track width.

  • Total Performance Wilwood Bolt-On Front / Rear Brake Kit, Chevy Spindles
    Total Performance Wilwood Bolt-On Front / Rear Brake Kit, Chevy Spindles
    x
                Give your T roadster the ultimate stopping power with Wilwood disc brakes. These kits feature aluminum hubs with both 5-on-4.5" and 5-on-4.75" bolt patterns, rotors, four-piston calipers with pads, plus all of the bearings, seals, brackets and hardwear you need for installation on our Chevy style spindles. Rear kit bolts on new-style Big Ford Ends.
            
  • 1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    1963-70 Chevy Pickup Front Disc Brake Bracket Kit
    x
                

    This kit allows you to upgrade your 1963-70 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you wanted custom 5-lug wheels on your truck anyways, right?

    The kit will make use of 1969-72 Chevelle rotors & 1969-77 Camaro calipers.

    Use Speedway Outer Wheel Bearing #912TLM11949 (not included).

  • Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    Speedway 1955-57 Chevy Deluxe Front Disc Brake Kit
    x
                

    Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.

    This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).

    • Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
    • May not clear some 14" wheels
    • Bolts onto stock '55-'57 spindles with no machine work
    • Includes rubber brake hoses

    910-31949 Instructions (PDF)

  • Basic Disc Brake Kit, GM Mid-size to Early Chevy Spindle
    Basic Disc Brake Kit, GM Mid-size to Early Chevy Spindle
    x
                

    Install 11" diameter GM mid-size disc brakes on your 1949-54 Chevy car spindles or 1941-59 Chevy pickup spindles with this basic bracket kit.

    Kit includes:

    • Brake brackets
    • Bearing & seal adapters
    • Hardware

    This kit will not work with stock 1949-54 steering arms. Not to be installed on stock 1949-54 Chevy vehicle front ends. To be used only on street rod tube front axles when using 1949-54 Chevy spindles commonly used on Model T and Model A to 1936 Ford front ends.

    916-31916 Instructions (PDF)

  • Forged Street Small Block Chevy 377 Rotating Assembly, 5.7 Inch Rods
    Forged Street Small Block Chevy 377 Rotating Assembly, 5.7 Inch Rods
    x
                

    These rotating assembly engine rebuild kits are designed for street use and include Keith Black forged pistons, Scat 4340 Pro-Comp I-beam rods and a Scat 4340 forged crankshaft.

    All Scat 4340 cranks are 2-piece rear main seal, internally balanced and weigh approximately 51-55 lbs.

    These assemblies will require balancing either by us or your machine shop.  All kits can be internally balanced.

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours. 

    Rings and bearings not included. Journals are standard size. Due to larger journal side radius on this aftermarket crankshaft, you must use Clevite H-series, King bearings or equivalent.  Includes spacers for main bearings.

    NOTE: Piston rings are not included and must be purchased separately.

     

  • Ford 9 Inch with 4-Link Assembly for Speedway 32 Ford Frame
    Ford 9 Inch with 4-Link Assembly for Speedway 32 Ford Frame
    x
                

    Triangulated 4-link rear suspension kit, including a Ford 9" rear end, specifically for the Speedway '32 Ford Boxed Truss frame 916-57050. This kit is a true bolt-in into our '32 Ford frame - no welding required. We suggest QA1 Adjustable rear coilovers 721-485 (at right) with 225 pound springs for this kit.

    • New 56" flange-to-flange Ford 9" housing with attached bracketry
    • New 31-spline high performance induction heat treated forged alloy steel axles
    • 3/4" 4-link bars (choose plain steel or polished stainless)
    • 4-bar rod ends with nylon bushings (polished stainless only)

     

    Triangulated Rear 4-Bar Installation Instructions (PDF) (Note: All axle brackets come welded to the housing - disregard welding requirements in instructions as it has already been completed.)

  • 1963-1970 Chevy 1/2 Ton Pickup Drop Spindle Disc Brake Kit
    1963-1970 Chevy 1/2 Ton Pickup Drop Spindle Disc Brake Kit
    x
                

    Want to lower your 1963-70 Chevy truck, get better brakes and improve your wheel selection, all at the same time? This bolt-on package is for you! It includes new 2-1/2" drop spindles that will bolt to stock ball joints and tie rods, making it simple to swap disc brakes. The kit also includes new brake rotors with popular 5-on 5-lug pattern (with 1/2" studs,) plus calipers, bearings, seals, spindle nuts, dust caps, banjo bolts and brake hoses. Kits may not work with factory drum brake wheels.

    Only for 1/2 ton trucks 

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31953 Instructions (PDF)

  • 1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion w/ Hubs
    1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion w/ Hubs
    x
                

    If you want to keep your original drum brakes on your favorite truck, we have you covered. The original came with ball-type wheel bearings and if you can find them, they are very expensive. Upgrading to modern tapered bearings is the only way to go. Tapered bearings disperse heat better and can deal with today’s grooved roads and modern wheels and tires much better than the original ball type.

    • Kit 916-31962 includes two new hubs, two inner and two outer wheel bearings, race, and two seals.
  • 1955-64 Chevy Car Roller Bearing Hub Kit
    1955-64 Chevy Car Roller Bearing Hub Kit
    x
                

    These new replacement forged aluminum hubs with new studs and installed bearing races are stronger and safer than any hub on the market to date.  Get rid of those old and expensive ball bearings and update to modern tapered roller bearings. Includes new hubs, bearings, races, seals and hardware. For use with stock brake drums only.

  • Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Mid-size to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    Kit installs 11" diameter GM mid-size disc brakes on your machined 1949-54 Chevy car spindles, 1941-59 Chevy pickup spindles, or Speedway '49-'54 Chevy-style spindles. Stock spindles will require minor machine work.

    NOTE: This kit will not work with stock '49-'54 Chevy steering arms installed on stock '49-'54 Chevy car front ends. Kit is designed for street rod dropped tube front axles using 1949-54 Chevy-style spindles and flat plate steering arms. Kit will not work with "straight" tube axles as the caliper will contact the axle tube before sufficient turning radius is completed.

    910-31954 Instructions (PDF)

  • Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • Premium Small Block Chevy Rotating Assembly, 377 .150 Dome, 5.7 Inch Rods
    Premium Small Block Chevy Rotating Assembly, 377 .150 Dome, 5.7 Inch Rods
    x
                Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A kit purchased with the optional balance job will ship in 24-48 hours.

    NOTE: Piston rings are not included and must be purchased separately.

    NOTE: 377 Kit includes main bearing spacers 

  • Premium Small Block Chevy Rotating Assembly, 377 Flat Top, 5.7 Inch Rods
    Premium Small Block Chevy Rotating Assembly, 377 Flat Top, 5.7 Inch Rods
    x
                Speedway introduces premium rotating assembly engine rebuild kits, with an optional  balance job. Includes new 2-pc rear main seal cast steel crank, rods,  pistons rod & main bearings. Cranks are new so they use standard  size bearings. 

    All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience! A kit purchased with the optional balance job will ship in 24-48 hours.

    NOTE: Piston rings are not included and must be purchased separately.

    NOTE: 377 Kit includes main bearing spacers

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-3/4
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31956 Instructions (PDF)

  • Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    Front Disc Brake Kit, GM Metric/Mustang II to 1949-54 Chevy Spindle, 5 on 4-1/2
    x
                

    An economical, lightweight brake kit for 1949-54 Chevy car spindles. Your stock Chevy spindles must be machined, or use Speedway '49-'54 Chevy-style spindles. This kit uses 9-1/4" Mustang II vented rotors with common GM metric calipers.

    • Typically used on Model T and Model A to 1936 Ford front ends 
    • For use on street rod tube front axles when using 1949-54 Chevy style spindles  
    • Will not work with stock 1949-54 steering arms 
    • Not to be installed on stock 1949-54 Chevy vehicle front ends

    910-31955 Instructions (PDF)

  • Wilwood 140-11010 1955-1957 Chevy Front Disc Brake Kit
    Wilwood 140-11010 1955-1957 Chevy Front Disc Brake Kit
    x
                

    This heavy duty Wilwood brake kit is just the ticket for your '55, '56 or '57 Chevy car. Features 4-piston billet Dynalite calipers, aluminum hubs, 11-3/4" vented rotors and required brackets and hardware. Calipers have 1/8" NPT inlet. Works with 15" and larger wheels.

    Note: For stock 1955-1957 Chevy spindles ONLY - will not fit 2" drop aftermarket spindles.

    835-14011010 Instructions (PDF)

  • Deluxe Disc Brake Kit 1965-1968 Chevy Full Size Car
    Deluxe Disc Brake Kit 1965-1968 Chevy Full Size Car
    x
                

    These kits allow you to put disc brakes on your full size 1965-68 Chevy cars such as Bel Air, Biscayne, or Impala. Works with most 15" wheels. Kit increases front track width by 11/16" per side and 1-3/8" overall.

    Kit Includes:

    • 11" brake rotor, 5 x 4-3/4"
    • Brake pads
    • GM Caliper slide bolts
    • Rebuilt 1969-1977 calipers (7/16"-20 inlets)
    • Brake brackets
    • Rubber Brake Lines
    • Hardware
    • Seals
    • Outer bearing cones
    • Inner bearing cones
    • Spacers
    • Dust caps

    Instructions (PDF)

     

  • 1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion
    1947-59 Chevy Pick-Up Tapered Roller Bearing Conversion
    x
                

    If you want to keep your original drum brakes on your favorite truck, we have you covered. The original came with ball-type wheel bearings and if you can find them, they are very expensive. Upgrading to modern tapered bearings is the only way to go. Tapered bearings disperse heat better and can deal with today’s grooved roads and modern wheels and tires much better than the original ball type.

    • Kit 916-31952 includes two inner and two outer wheel bearings, race, and two seals.
  • Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
    Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • Track-T Chevy Spindle & Brake Bracket Kits
    Track-T Chevy Spindle & Brake Bracket Kits
    x
                

    This kit mounts 1949-1954 Chevy spindles and Pinto/Mustang II disc brakes to your Track-T front axle.  Spindles are machined for Pinto/Mustang II 9-1/4" rotors.

    Kit includes:

    • (2) 49-54 Chevy spindles
    • (1) kingpin set
    • (1) Pinto rotor to Chevy spindle brake adapter kit
    • (2) Set screws, 1/4" UNC
    • (1) Spindle nut set
Goto Previous PagePrevious Page
1 2 3 4