Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevy 400 valve covers" Page 1 of 2

  • SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    SuperSeal Small Block Chevy Valve Cover Gaskets, Pre 1986
    x
                

    Small Block Chevy (SBC) valve cover gaskets made with a stainless steel frame sandwiched between durometer-tested neoprene rubber. Eliminates leakage caused by internal pressure fluctuations. Won't tear or collapse.

    Reusuable. Package of two. 

    SuperSeal Illustration (GIF)

     

  • Edelbrock 4145 Chevy 262-400 V8 Valve Covers
    Edelbrock 4145 Chevy 262-400 V8 Valve Covers
    x
                

    Fits small block Chevys from 1959-86. Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. Overall height is 3-1/2" inches. 

    Made in the U.S.A. 

  • Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    Chevrolet Performance 19318604 Sealed 400 604 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • SuperSeal Small Block Chevy Overhaul Gasket Set, 400 Chevy '70 -'81
    SuperSeal Small Block Chevy Overhaul Gasket Set, 400 Chevy '70 -'81
    x
                SuperSeal standard rebuild gasket sets feature composite head gaskets, intake, water pump, valve cover, front cover and seal, oil pan and rear main seal.
            
  • 1960-1986 Small Block Chevy Fabricated Valve Covers w/ Holes
    1960-1986 Small Block Chevy Fabricated Valve Covers w/ Holes
    x
                

    Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! Each cover comes with a single baffeled 1-1/4" hole for PCV or oil fill. Can be painted, polished, or left in bare aluminum finish.

    Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

    Grommets & hardware not included. Use a 1-1/4" grommet.

  • Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    Edelbrock 4144 1960-86 Small Block Chevy Finned Valve Covers w/ Holes
    x
                

    Classic 1960-1986 Small Block Chevy Edelbrock finned valve covers with oil fill hole. This style of valve covers was first made in the 1950's and they're still cool today. They are tall enough to clear roller rockers.

    • Aluminum
    • One valve cover has a hole and grommet is included for a PCV valve
    • Other valve cover has a threaded hole (female) and a male threaded aluminum cap with O-ring seal
    • Included grommet can be used in place of the cap for a push in breather
    • Includes baffle and pins to use inside the valve cover if desired
  • 1960-1986 Small Block Chevy Fabricated Valve Covers
    1960-1986 Small Block Chevy Fabricated Valve Covers
    x
                

    Whether you're going for the hardcore race look or just trying to save weight, these fabricated aluminum valve covers are for you! These fully welded sheet aluminum covers feature a 1/8" thick flange for a great seal. Can be painted, polished, or left in bare aluminum finish. Bolts and washers included for mounting with valve cover. Gaskets not included.

    Fits 1960-1986 Small Block Chevy 283-400 c.i. V8.

    No provisions for an oil breather. 

  • Small Block Chevy Valve Cover Gaskets, Vortec Heads
    Small Block Chevy Valve Cover Gaskets, Vortec Heads
    x
                

    Rubber valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC) with vortec heads.

  • Billet Specialties Streamline Chevy Valve Covers
    Billet Specialties Streamline Chevy Valve Covers
    x
                Billet Specialties Streamline valve covers offer a fresh new look for hot rod & custom car valve covers. A single precision machined raised billet rib sits upon on a die cast aluminum valve cover to complement any exterior trim cues. All valve covers include stainless hardware and baffles. Works with 1-1/4" breathers such as our 910-23120. 
    • Removable accent trim spear
    • Includes metal baffles
    • Includes grommets
    • 1960-86 S/B Chevy
    • Works with 1-1/4” breathers
    • Choose raw finish or satin black powdercoated
  • Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Fel-Pro 1648 S/B Chevy Valve Cover Gaskets, 1987-Up Centerbolt Heads
    Fel-Pro 1648 S/B Chevy Valve Cover Gaskets, 1987-Up Centerbolt Heads
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Chevy Bow Tie Valve Covers
    $134.99
    Chevy Bow Tie Valve Covers
    x
                If your true love is anything that spells Chevy or has a Bow Tie, look at these. 

    These polished aluminum valve covers fit 1960-1986 S/B Chevys and are made to GM specs. They feature OEM style baffles and dippers. Available with or without the Chevy Bow Tie.

    These valve covers have built-in breather baffles. Two grommets are included, one for a stock PCV valve, one for a breather cap like our 910-11033.

    Valve cover depth is 3-9/16". One 1-1/4" push-in hole per cover. Suggested bolt length is 1-1/4".

     

  • Fel-Pro P1644 Small Block Chevy Valve Cover Gasket-Chevy 18/Brodix-12
    Fel-Pro P1644 Small Block Chevy Valve Cover Gasket-Chevy 18/Brodix-12
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Valvetrain Oil Deflector
    $22.99
    Valvetrain Oil Deflector
    x
                Redirects oil from push rods to fulcrum balls, rockers and springs to provide maximum lubrication and cooling. Extends life of stock valve train assembly. Manufactured from lightweight aluminum. Ideal for claimer motors. Fits all S/B Chevy and Ford 302 motors with stamped rocker arms. 

    Polylocks are required for the installation of this item. Please see our suggestions on this page.

  • Fel-Pro 1603 Small Block Chevy Valve Cover Gaskets-Blue Stripe-7/32 In
    Fel-Pro 1603 Small Block Chevy Valve Cover Gaskets-Blue Stripe-7/32 In
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Fel-Pro P1628 Small Block Chevy Valve Cover Gaskets-1/4 Inch
    Fel-Pro P1628 Small Block Chevy Valve Cover Gaskets-1/4 Inch
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    Fel-Pro 1604 Small Block Chevy Valve Cover Gaskets-5/16 In Cork/Rubber
    x
                Fel-Pro Blue Stripe premium quality Small Block Chevy (SBC) valve cover gaskets.
            
  • Moroso 68385 Tall Aluminum Valve Covers w/ Crossover Breathers
    Moroso 68385 Tall Aluminum Valve Covers w/ Crossover Breathers
    x
                

    Die cast aluminum valve covers with cross-over breather tube, 1-3/8" shielded breathers, hoses, and clamps. Extra tall to clear roller rocker arms, stud girdles, and most shaft rocker assemblies. Features a brilliant hand polished finish. 

    Fits '60-'86 S/B Chevy.

  • Moroso 68370 Tall Aluminum Valve Covers w/ Breathers
    Moroso 68370 Tall Aluminum Valve Covers w/ Breathers
    x
                

    Die cast aluminum valve covers have 1-3/8" shielded breathers on one side only. Extra tall to clear roller rocker arms, stud girdles, and most shaft rocker assemblies. Features a brilliant hand polished finish. 

    Fits '60-'86 S/B Chevy.

  • Ansen 110-3001 1960-1986 Small Block Chevy Valve Covers
    Ansen 110-3001 1960-1986 Small Block Chevy Valve Covers
    x
                

    The perfect finishing touch for your small block Chevy engine.  These cast aluminum standard height valve covers fit 1960-86 small block Chevy V8.

    No holes for breathers or fill caps.

  • Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    Edelbrock 7501 Performer RPM Air-Gap Small Block Chevy Intake Manifold
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-7501 Instructions (PDF)

  • Small Block Chevy Engine Standard Dress Up Kit
    New
    Small Block Chevy Engine Standard Dress Up Kit
    x
                
    Add some shine to your small block Chevy engine with these chrome standard dress up kits. 
     
    Each kit includes:
    • Valve Covers - pair, smooth, no-name, stamped steel, chrome finish, 3-3/4" tall, 5" wide, 19-5/8" long, 1.25" push-in breather holes, internal baffles
    • Air Cleaner Assembly - chrome plated, 4 barrel (5-1/8" neck), 14" diameter, 3-1/4" overall height, 2" tall paper filter element, mounting hardware and PVC smog fitting included
      • There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb
    • Valve Cover Hold Down Clamps - set of eight, chrome plated or black finish, 5" long
    • Valve Cover Wing Nuts - set of eight, chrome plated, extra-long 1/4" coarse threads

     

  • Chrome Retaining Bolt for Centerbolt Valve Covers
    Chrome Retaining Bolt for Centerbolt Valve Covers
    x
                

    Chrome plated hex head 1/4"-20 x 3-3/4" bolts for S/B Chevy steel center bolt valve covers. Includes flat washers.

    Eight required per engine.

  • Edelbrock 75164 262-400 Chevy EnduraShine RPM Air-Gap Vortec Intake
    Edelbrock 75164 262-400 Chevy EnduraShine RPM Air-Gap Vortec Intake
    x
                

    Based on the powerful Performer RPM Vortec #7116, single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads.The RPM Air-Gap manifold delivers outstanding performance using the same air-gap technology found in our race-winning Victor manifolds. This unique design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations. For square-bore carbs. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under stock Corvette hood. Available with EnduraShine finish.

  • Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    Edelbrock 75014 RPM Air-Gap S/B Chevy Intake Manifold, Endurashine
    x
                

    Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on the Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.

    Manifold features rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks.

    • For square-bore carburetors only
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Not for 1987 and later cast iron heads
    • Will not fit under stock Corvette hood

    325-75014 Instructions (PDF)

  • MSD 5565 Street-Fire Spark Plug Wires Set, S/B Chevy, Stock Distributor Cap
    MSD 5565 Street-Fire Spark Plug Wires Set, S/B Chevy, Stock Distributor Cap
    x
                

    Street Fire spark plug wires have the quality you've come to expect from MSD Ignition at a price that's comparable to other brands. They feature spiral-wound, low-resistance conductors and high EMI suppression capabilities, all wrapped in simple, durable black sleeves and boots.  Designed for Small Block Chevys with early Socket style cap. Routed over the valve covers.

    • Helically wound conductor suppresses electro and radio noise
    • Kevlar core combination for great strength and durability
    • Heavy duty terminals for secure connection
    • 8mm silicone and synthetic jacket resists heat and abrasion
    • 500 Ohms per foot resistance for improved spark delivery and power
    • Silicone boots protect against high exhaust temps
  • Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    Small Block Chevy Valve Cover Gaskets, 5/16 Inch Extra Thick
    x
                

    Cork valve cover gasket set for 283-400 cubic inch Small Block Chevy (SBC).

  • Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    Fel-Pro Gaskets KS2614 1970-1980 S/B Chevy 400 Overhaul Gasket Set
    x
                

    The Fel-Pro Overhaul Gasket Set includes the composite head gasket (Fel Pro # 8364PT), valve cover, water pump, intake, front seal and cover gasket, oil pan and rear main seal.

    Fits 1970-1980 Small Block Chevy 400 V8.

  • Edelbrock 7516 Performer RPM Air-Gap Vortec S/B Chevy Intake Manifold
    Edelbrock 7516 Performer RPM Air-Gap Vortec S/B Chevy Intake Manifold
    x
                

    Based on the proven Performer RPM Vortec, this single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The unique Air-Gap design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the rpm range.

    An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor boss that clears all waternecks, two distributor clamp locations and a heater outlet boss that's angled for proper fit over the valve cover.

    • Accepts 1976 and later alternator and air-conditioning brackets
    • For square-bore carbs
    • No provision for exhaust-heated chokes and no exhaust crossover
    • Will not fit under stock Corvette hood

    Edelbrock Intake Manifold Installation Instructions (PDF)

  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/64cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/64cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

  • Dart Iron Eagle Assembled Chevy Heads, Straight Plug, 200cc/64cc
    Dart Iron Eagle Assembled Chevy Heads, Straight Plug, 200cc/64cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/49cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 215cc/49cc
    x
                Please view the product's page for more information
            
  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/49cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/49cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

  • COMP Cams 19001-16 Ultra-Gold    ARC Series Alum. Rocker Arms, Chevy 3/8-1.5
    COMP Cams 19001-16 Ultra-Gold ARC Series Alum. Rocker Arms, Chevy 3/8-1.5
    x
                Please view the product's page for more information
            
  • Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/64cc
    Dart Iron Eagle Assembled Chevy Heads, Angle Plug, 200cc/64cc
    x
                

    These complete Dart Iron Eagle Platinum cylinder heads are professionally assembled right here at Speedway Motors. We offer three different versions of each head (Street Ready, Flat Tappet Ready, Roller Ready) to perfectly suit your racing needs.

    • Standard 23 degree valve angle
    • Standard port location and intake bolt pattern fit most manifolds
    • Pushrod holes enlarged for clearance with high ratio rocker arms
    • Heart shaped chambers improve combustion efficiency
    • Multi-angle intake seats and radiused exhaust seats dramatically increase airflow
    • Hardened exhaust seats compatible with unleaded gasoline
    • Manganese bronze intake valve guides and phosphorous bronze exhaust valve guides extend cylinder head life
    • Spark plug holes are machined for tapered seat 5/8" hex "peanut" spark plugs
    • Dual bolt pattern accepts flange mount and center bolt valve covers

    Head Application Chart (GIF)

    Roller Ready - Please specify cam lift in comments section when ordering.

    Iron Eagle Tech Notes (PDF)

    Dart Installation Note (

Goto Previous PagePrevious Page
1 2