Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"chevelle front body" Page 1 of 4

  • QA1 1968-72 Chevelle A-Body Front Coilover Kit
    QA1 1968-72 Chevelle A-Body Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • AFCO 200-1001 Low Friction 1966-74 GM Front Suspension
    AFCO 200-1001 Low Friction 1966-74 GM Front Suspension
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 
    Fits
    • 1966-72 GM A-Body
    • 1967-69 GM F-Body
    • 1968-74 GM X-Body 
  • Afco 3840FBNCBG Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    New
    Afco 3840FBNCBG Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    x
                Please view the product's page for more information
            
  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • AFCO 200-1003 Low Friction 1970-73 GM Front Suspension Kit
    AFCO 200-1003 Low Friction 1970-73 GM Front Suspension Kit
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    Fits

     

    • 1970-72 GM F-Body
    • 1973 GM A-Body 

     

  • Polyurethane Bushing Kit 1974-77 Chevelle A-Body
    Polyurethane Bushing Kit 1974-77 Chevelle A-Body
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

    These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

     

  • Bilstein F4BE3E249MO 73-88 AG Body Front Street Shock Comp 219/Reb 358
    Bilstein F4BE3E249MO 73-88 AG Body Front Street Shock Comp 219/Reb 358
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • AFCO 5 1/2 Inch x 9 1/2 Inch Front Springs
    AFCO 5 1/2 Inch x 9 1/2 Inch Front Springs
    x
                Please view the product's page for more information
            
  • AFCO 200-1002 Low Friction 1978-88 GM A/G-Body Front Suspension
    AFCO 200-1002 Low Friction 1978-88 GM A/G-Body Front Suspension
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

  • Bilstein AK6565F Front Street Shock, 73-88 A/G-Body, Comp 220/Reb 325
    Bilstein AK6565F Front Street Shock, 73-88 A/G-Body, Comp 220/Reb 325
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • AFCO 200-1004 Low Friction 1974-79 GM Front Suspension
    AFCO 200-1004 Low Friction 1974-79 GM Front Suspension
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    Fits

     

    • 1974-79 GM F-Body
    • 1975-77 GM A-Body
    • 1975-79 GM X-Body 

     

  • QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    QA1 64-67 A-Body/55-57 Chevy Front Coilover Kit
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 18 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

     

  • Bilstein AK1051 1973-1988 A/G-Body Front Stock Shock, Comp 172/Reb 393
    Bilstein AK1051 1973-1988 A/G-Body Front Stock Shock, Comp 172/Reb 393
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • Bilstein F4BE3F129MO 73-88 A/G Body Front Street Shock Com 233/Reb 110
    Bilstein F4BE3F129MO 73-88 A/G Body Front Street Shock Com 233/Reb 110
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • Bilstein F4BE3C751M1 73-88 A/G Body Front Street Shock Com 154/Reb 197
    Bilstein F4BE3C751M1 73-88 A/G Body Front Street Shock Com 154/Reb 197
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • Bilstein F4BE3F130M0 73-88 AG Body Front Street Shock Comp 190/Reb 245
    Bilstein F4BE3F130M0 73-88 AG Body Front Street Shock Comp 190/Reb 245
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • AFCO 3840F/BNC Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    AFCO 3840F/BNC Eliminator BNC Front Shock, GM A, B, F, G, X-Bodies
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3840FBNC
      • Body Mount: Tie Bar Mount w/ 2.375" bolt centers
      • Shaft Mount: 9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D.

  • Bilstein F4BE3C750M2 73-88 AG Body Front Street Shock Comp 206/Reb 131
    Bilstein F4BE3C750M2 73-88 AG Body Front Street Shock Comp 206/Reb 131
    x
                

    The technology that has made Bilstein a winner in Winston Cup, Indy Car and Formula 1 is now available to the grassroots level hobby stock and street stock racer. Bilstein monotube gas shocks use deflective disc valving to give more precise and consistent valving. Plus, their rugged construction and precisely machined finishes ensure a long performance life. These shocks may cost more initially but they pay off in the winner's circle!

    • Monotube body dissipates heat more effectively than twin-tube designs
    • Nitrogen gas puts shock oil under pressure to totally prevent shock fade
    • Allows for more precise, consistent set-ups
    • Weight transfer when you need it
    • Tires will stay on the track through the rough spots
    • Better control under braking
    • 1973-83 GM A-Body (Chevelle, Malibu, Monte Carlo, etc.)
    • 1978-88 GM G-Body (Monte Carlo, Regal, Cutlass, Grand Prix)

    Bilstein Street Stock Shock Chart (GIF)

  • Polyurethane Bushing Kit 1968-72 Chevelle
    Polyurethane Bushing Kit 1968-72 Chevelle
    x
                

    Energy Suspension Master Bushing Sets are the high-tech solution to performance handling and control that O.E.M. manufacturers just don't offer! Energy's complete Master Set both restores worn mounts and bushings as well as adds a dramatically higher degree of performance handling to any vehicle.

    Energy's special HYPER-FLEX polyurethane formula is of a higher durometer (firmness) than rubber materials, which assures long-lasting performance as well as a firm chassis feel.

    These Master Bushing Sets offer coverage front to back of the vehicle's chassis.

    • A real must for competition use, or just for that "seat-of-the-pants" feel
    • Increases vehicle stability and control as well as durability
    • Reduces wheel hop and traction loss
    • Proven by both professional and amateur racers alike
    • Both restores and improves suspension to better than new performance
    • Made of Energy's HYPER-FLEX performance polyurethane
    • Heavy duty metal sleeves and components are used for increased strength
    • Kit Includes:

      • Front & Rear Control Arm Bushings
      • Front End Link Set
      • Body Mount Set
      • Rear Coil Spring Isolators
      • Transmission Mount
      • Ball Joint & Tie Rod End Boots

    *Sets do not contain sway bar components, because of the various sizes offered by the vehicle manufacturer.

     

  • AFCO 3840CF Pro Touring Double Adj Front Shock, Chevy/GM/Dodge Truck
    AFCO 3840CF Pro Touring Double Adj Front Shock, Chevy/GM/Dodge Truck
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 4" Stroke - 10.90" Comp - 14.90" Ext
    • 12.25"-13.25" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

     

  • AFCO 3860F/BNC Eliminator BNC Front Shock, Mopar B & E Body
    AFCO 3860F/BNC Eliminator BNC Front Shock, Mopar B & E Body
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3860FBNC
      • Body Mount: 1/2" I.D. Bearing (1.06" wide)
      • Shaft Mount: 9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D.

  • AFCO 3845CF Pro Touring Single Adj Front Shock, Chevy/GM/Dodge Truck
    AFCO 3845CF Pro Touring Single Adj Front Shock, Chevy/GM/Dodge Truck
    x
                

    AFCO Pro Touring Shocks provide bolt-on high performance handing for every generation. These twin-tube shocks are built around a lightweight billet aluminum body housing a low friction rod guide for consistent, fade-free performance. Adjustments are made with a simple click of the knob.

    • 4" Stroke - 10.90" Comp - 14.90" Ext
    • 12.25"-13.25" Shock eye-to-eye Length @ Ride Height
    • 100% Bolt On (Stock Mount)
    • Gives you Total Control over your cars handling capabilities
    • Compression adjustment controls bump and "front end feel" during cornering
    • Rebound adjustment controls body roll and properly dampens spring for overall handling synergy 
    • Factory Dyno Tested for performance
    • Made in the USA

    Note: You may need to "slot" the tie bar mount.  

    For application information see Application tab. 

     

  • QA1 1974-77 GM A/G/X Front Coilovers
    QA1 1974-77 GM A/G/X Front Coilovers
    x
                

    Don't you wish you had adjustable coil-overs on the front of your classic car to vary the ride height and road feel? This QA1 Pro Coil Adjustable Front Coil-Over Conversion Kit will do just that for you. You get two adjustable coilover shock assemblies that have a single knob with 24 valving options and two coil springs.

    • Easy Bolt-In Installation
      • Minimal modifications to be made
      • Remove the existing shocks and springs and the QA1 Pro Coil System bolts right back in.
    • Specialty Designed Conical Springs
      • Springs designed so that the lower end sits on the coil-over shock and the upper end sets in the original spring bucket in the frame
      • Allows for a longer, lighter spring for more stored energy, offering increased weight transfer
      • Greater durability by locating the spring pressure in the frame and not on a single stud
    • Ride Height Adjustable
      • Threaded aluminum body allows easy ride height adjustment
    • QA1 Pro Coil shocks are revalveable and rebuildable by QA1 Authorized Service Centers

    Choose 350 lb., 450lb. or 550 lb. rate springs.

  • AFCO 1968-72 Chevelle Stamped Steel Lower Control Arm, Left
    AFCO 1968-72 Chevelle Stamped Steel Lower Control Arm, Left
    x
                

    These are stock, reclaimed 1968-72 Chevelle A-Body stamped steel control arms that have been cleaned and have had the ball joint removed. A-arm still has OEM bushings that will need to be replaced.

    Accepts Moog K5103 style press-in ball joints for stock spindle, or Moog K6145 ball joints for other GM spindles.

  • Morris Classic Concepts 3-Point Seat Belt Kit, 1968-73 Chevelle, Front Seats
    Morris Classic Concepts 3-Point Seat Belt Kit, 1968-73 Chevelle, Front Seats
    x
                Safety and comfort come first with these seat belts. Kits come complete  with instructions, Grade 8 mounting hardware and powder-coated mounting  brackets, assembled and ready to bolt into your car. These seat belt  systems mount in the factory mounting holes; no modifications needed.  The top soft sash design looks like "stock" and comes with plastic  clamshell covers. All belts have been safety tested and meet FMVSS  standards! 
    • For front seats
    • Modern safety for your classic GM, assembled and ready to bolt into your car
    • Chrome plated buckle with "GM" button
    • Officially licensed product
    • OEM type retractor
    • Black webbing
    • Mount in the factory mounting holes; no modifications needed
    • Kits come complete with:
      • Instructions
      • Grade 8 mounting hardware
      • Powder-coated mounting brackets
  • AFCO 3850F/BNC Eliminator BNC Front Shock, Mopar & Chevy II
    AFCO 3850F/BNC Eliminator BNC Front Shock, Mopar & Chevy II
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3850FBNC
      • Body Mount: 1/2" I.D. Bearing (1.06" wide)
      • Shaft Mount: 9/16" Stud (3-1/8" length, 1-1/8" threads, 1-3/4" washers)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D.

  • AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    AFCO 3840F Eliminator Front Shocks, Double Adj - Chevrolet/GM, Dodge
    x
                

    AFCO Eliminator Twin Tube Adjustable FRONT shocks are built specifically for drag racing. Using advanced onboard diagnostics, AFCO developed the Eliminator Series to precisely control your race car at every point on the track. With the easy-to-use, repeatable "click" settings, this shock will give you unsurpassed traction.

    By allowing full control over both compression and rebound forces, Double Adjustable shocks give the tuner the ability to fine tune every aspect of the chassis movement to provide the ultimate in acceleration control and overall driveability.

    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D
    Fits 1979-1992 Dodge Ram half-ton pickup trucks

    Fits most '55-'96 GM chassis

    See Application tab for fittment.

  • AFCO 3870F/BNC Eliminator BNC Front Shock, 1993-02 Camaro/Firebird
    AFCO 3870F/BNC Eliminator BNC Front Shock, 1993-02 Camaro/Firebird
    x
                

    See Application tab for specific fittment information.

    AFCO's Eliminator BNC Valving Twin Tube Double Adjustable Shocks eliminate bounce. The BNC shocks are designed to better absorb the impact of the car after a wheel stand launch. Works great in Stock, Super Stock, Outlaw 10.5, True Street, and other drag racing classes.

    • 106-3870FBNC
      • Body Mount: Tie Bar Mount w/ 2.625" bolt centers
      • Shaft Mount: 1/2" I.D. Bearing (1.06" wide)
    • Lightweight aluminum construction also helps dissipate heat
    • Rebound settings are adjusted via a shaft-mounted knob with 32 clicks
    • Compression settings are adjusted via a body-mounted know with 32 clicks
    • Smooth, Ultra Low Friction rod guide
    • Low resistance allows internals to function to their fullest potential
    • Almost no "stiction" to interfere with putting the power down
    • Coil-over Ready w/ purchase of kit 106-20135D

    Can be converted to a coil-over with kit 106-20135D (sold separately, except 106-3870FBNC).

  • Small Block Chevy Clipster Headers, AHC Coated
    Small Block Chevy Clipster Headers, AHC Coated
    x
                

    These S/B Chevy Clipster headers are for 1964-87 GM A*, F* and G-Body cars and fit many street rod applications with uni-body front clip suspensions. Clipster headers use longer primaries than Tight Tucks, yet shorter than full length headers. Collectors exit toward the rear of the engine compartment providing excellent ground clearance on "slammed" applications as well as clearing steering and suspension components. These ceramic coated headers provide superior performance and durability.

    1-5/8" primaries and 3" collectors. Fits straight or angle plug heads.

    Header Sizing Chart (GIF)

     * See NOTES tab for chassis fittment details.

  • Small Block Chevy Clipster Headers, Chrome
    Small Block Chevy Clipster Headers, Chrome
    x
                

    These S/B Chevy Clipster headers are for 1964-87 GM A*, F* and G-Body cars and fit many street rod applications with uni-body front clip suspensions. Clipster headers use longer primaries than Tight Tucks, yet shorter than full length headers. Collectors exit toward the rear of the engine compartment providing excellent ground clearance on "slammed" applications as well as clearing steering and suspension components.

    1-5/8" primaries and 3" collectors. Fits straight or angle plug heads.

    Header Sizing Chart (GIF)

     * See NOTES tab for chassis fitment details.

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

    Not legal for sale or use in California on pollution controlled vehicles

     

  • Pro Shocks C200/SR500 64-74 GM B/B Coilover Front Shock Conversion Kit
    Pro Shocks C200/SR500 64-74 GM B/B Coilover Front Shock Conversion Kit
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Skylark '64-'67
    • Camaro '67-'69
    • El Camino/Chevelle'64-'67
    • Nova/Chevy II '68-'74
    • Corvette '63-'82
    • Cutlass '64-'67
    • Omega '73-'74
    • Firebird '67-'69
    • LeMans/GTO/Tempest '64-'72
  • Pro Shock C200/SR450 GM B/B V8 Pro Coilover Front Shock Conversion Kit
    Pro Shock C200/SR450 GM B/B V8 Pro Coilover Front Shock Conversion Kit
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Skylark '68-'72
    • El Camino/Chevelle '68-'72
    • Monte Carlo '70-'72
    • Cutlass '68-'72
  • Pro Shocks C200/GM450 70-87 GM B/B Coilover Front Shock Conversion Kit
    Pro Shocks C200/GM450 70-87 GM B/B Coilover Front Shock Conversion Kit
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Regal '73-'87
    • Camaro '70-'81
    • El Camino/Chevelle '73-'83
    • Monte Carlo '73-'88
    • Nova/Chevy II '75-'79
    • S-10/S-15 2WD '84-'04
    • Full Size Chevy '58-'93
    • Cutlass '73-'87
    • Omega '79-'79
    • Firebird/Gran Prix '70-'81
    • LeMans '73-'87
    • GTO/Ventura '74-'77
  • Pro Shock C200/SR350 S/B V8 GM Pro Coilover Front Shock Conversion Kit
    Pro Shock C200/SR350 S/B V8 GM Pro Coilover Front Shock Conversion Kit
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Skylark '68-'72
    • El Camino/Chevelle '68-'72
    • Monte Carlo '70-'72
    • Cutlass '68-'72
  • Small Block Chevy Clipster Headers, Plain
    Small Block Chevy Clipster Headers, Plain
    x
                

    These S/B Chevy Clipster headers are for 1964-87 GM A*, F* and G-Body cars and fit many street rod applications with uni-body front clip suspensions. Clipster headers use longer primaries than Tight Tucks, yet shorter than full length headers. Collectors exit toward the rear of the engine compartment providing excellent ground clearance on "slammed" applications as well as clearing steering and suspension components.

    1-5/8" primaries and 3" collectors. Fits straight or angle plug heads.

    Header Sizing Chart (GIF)

    WARNING: This header will require the use of Autolite 'short' style spark plugs OR NGK BR8ECM type plugs to be used for clearance purposes.  No other plugs or shorty plugs offered other than Autolite branded 'shorty' plugs will clear. 

  • AFCO 1022 10 Series Street/Strip/Track Front Shock, Comp/Reb: 7/4
    AFCO 1022 10 Series Street/Strip/Track Front Shock, Comp/Reb: 7/4
    x
                

    AFCO has been in the shock business for over 20 years and has incorporated their technological knowledge into this 10-Series street/strip/track shock.  This 80/20 front shock allows the front to lift and hold under acceleration, which transfers weight to the rear tires and improves traction.

    Whatever your street stock choice, AFCO has the stock mount shock for you.  These 10-Series gas pressure shocks are built with the valving you need for racing, but are assembled in a "stock" configuration body to meet most track rules.  The split-valve shocks offer additional tuning capabilities over the standard valving. 

    Available Split Valves - Part # 1061022 is a "split valve - easy up" shock used on the front to promote weight transfer under acceleration.  This will enhance forward traction.

    AFCO K-Series shocks are built to the highest quality standards and will deliver the control you need to keep your tires planted and your horsepower working for you.

    • Compressed Length: 9.375"
    • Extended Length: 13.375"

    Fits:

    • 1955-86 GM Full Midsize
    • 1955-57 Chevy
    • 1958-70 Impala
    • 1970-81 Camaro/Firebird
    • 1964-89 Chevelle/Monte Carlo
    • 1965-86 Ford Fullsize, Montego and Cougar

     

  • Pro Shocks C200/SR375 Coilover Front Shock Conversion Kit, 1964-74 GM
    Pro Shocks C200/SR375 Coilover Front Shock Conversion Kit, 1964-74 GM
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Skylark '64-'67
    • Camaro '67-'69
    • El Camino/Chevelle'64-'67
    • Nova/Chevy II '68-'74
    • Corvette '63-'82
    • Cutlass '64-'67
    • Omega '73-'74
    • Firebird '67-'69
    • LeMans/GTO/Tempest '64-'72
  • Pro Shocks C200/GM300 Coilover Front Shock Conversion Kit, 1970-87 GM
    Pro Shocks C200/GM300 Coilover Front Shock Conversion Kit, 1970-87 GM
    x
                

    Pro Coilover conversion kits feature a steel-body coilover front shock which bolts directly in place of your factory front shock. Requires no welding, cutting or modifications to your original frame. Sold as a PAIR.

    Fits the following applications:

    • Regal '73-'87
    • Camaro '70-'81
    • El Camino/Chevelle '73-'83
    • Monte Carlo '73-'88
    • Nova/Chevy II '75-'79
    • S-10/S-15 2WD '84-'04
    • Full Size Chevy '58-'93
    • Cutlass '73-'87
    • Omega '79-'79
    • Firebird/Gran Prix '70-'81
    • LeMans '73-'87
    • GTO/Ventura '74-'77
  • 1964-72 GM A, F, X Body 13 Inch Big Brake & 2 Inch Dropped Spindle Kit
    1964-72 GM A, F, X Body 13 Inch Big Brake & 2 Inch Dropped Spindle Kit
    x
                Finally, an affordable big brake kit for GM A-body, F-body and X-body muscle cars. This complete front disc brake kit  includes everything you'll need to equip your 1968-74 Nova, 1964-72 Chevelle or 1967-69 Camaro  with 13" binders and a lower, more aggressive stance.

    Kit Includes:
    • 2" Dropped Spindles
    • 13" Slotted & Vented Rotors
    • Steel Hubs
    • Braided stainless steel brake hoses
    • GM Dual Piston Calipers & Brackets
    • Brake pads
    • Bearings, hardware and dust caps

    NOTE: Requires use of 17" or larger wheel.

  • Small Block Chevy Clipster Headers, Stainless
    Small Block Chevy Clipster Headers, Stainless
    x
                

    These S/B Chevy Clipster headers are for 1964-87 GM A*, F* and G-Body cars and fit many street rod applications with uni-body front clip suspensions. Clipster headers use longer primaries than Tight Tucks, yet shorter than full length headers. Collectors exit toward the rear of the engine compartment providing excellent ground clearance on "slammed" applications as well as clearing steering and suspension components.

    1-5/8" primaries and 3" collectors. Fits straight or angle plug heads.

    Header Sizing Chart (GIF)

     * See NOTES tab for chassis fittment details.

    NOTE: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine is started, will change to a light champagne color to a darker gold finish and in some instance may even turn dark blue or purple. This can be polished back out when utilizing Blue-away or Simi-chrome polish, but please note that when the headers reach running temperature again, they will immediately ch

Goto Previous PagePrevious Page
1 2 3 4