Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"cast valve covers" Page 1 of 3

  • Chevy LS1/LS6 Finned Valve Covers, Plain
    Chevy LS1/LS6 Finned Valve Covers, Plain
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • Chevy LS1/LS6 Finned Valve Covers, Polished
    Chevy LS1/LS6 Finned Valve Covers, Polished
    x
                

    If you are running a '97-Up LS1 style engine in your classic street rod, these valve covers are for you. These finned covers have a cast-in breather/PCV hole in each cover. They only use the 2 end bolts for mounting (stock uses four) for a cleaner look. The sand cast aluminum construction provides stiffness so four bolts are not needed to apply pressure evenly to the gasket. Comes with gaskets and hardware.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Cast-in internal baffles
    • Clears Jesel roller rockers
    • Mounting hardware included

    Note: There are no provisions for the original coil packs. Use our relocation harness to move coil packs to the fenders or firewall. 

    Finned Valve Cover Specs (PDF) 

  • GM Performance IMCA Sealed CT 350 602 Crate Engine, IMCA Approved
    GM Performance IMCA Sealed CT 350 602 Crate Engine, IMCA Approved
    x
                Please view the product's page for more information
            
  • Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
    Chevrolet Performance 19258602 Sealed 350 602 Small Block Crate Engine
    x
                Please view the product's page for more information
            
  • Edelbrock 41159 Cast Single Air Cleaner
    $139.99
    $172.95
    New
    Edelbrock 41159 Cast Single Air Cleaner
    x
                Edelbrock’s Classic Series engine dress-up accessories deliver a definitive appeal that brings back a look from the 1950’s.

    Edelbrock first made these aluminum valve covers in the late '50s and they continue to be a classic. Made of heavy-gauge sand-cast aluminum, our classic finned valve covers are now available in a natural as-cast finish, for enthusiasts looking for a subtle classic look for their engine.

    All of the air cleaners include a pre-oiled and washable cotton gauze element for excellent filtration. They are compatible with all popular 5-1/8" diameter carburetors and throttle bodies.

    Classic Series Accessory Details:
    • Now available in a natural as-cast finish for an authentic look from the 1950’s
    • Made from heavy-gauge sand-cast aluminum in the USA
    • Air cleaners include a 3” washable and reusable filter element that fits 5-1/8” diameter carburetors and throttle bodies
  • Edelbrock 41179 Cast 14 Inch Round Air Cleaner
    New
    Edelbrock 41179 Cast 14 Inch Round Air Cleaner
    x
                Edelbrock’s Classic Series engine dress-up accessories deliver a definitive appeal that brings back a look from the 1950’s.

    Edelbrock first made these aluminum valve covers in the late '50s and they continue to be a classic. Made of heavy-gauge sand-cast aluminum, our classic finned valve covers are now available in a natural as-cast finish, for enthusiasts looking for a subtle classic look for their engine.

    All of the air cleaners include a pre-oiled and washable cotton gauze element for excellent filtration. They are compatible with all popular 5-1/8" diameter carburetors and throttle bodies.

    Classic Series Accessory Details:
    • Now available in a natural as-cast finish for an authentic look from the 1950’s
    • Made from heavy-gauge sand-cast aluminum in the USA
    • Air cleaners include a 3” washable and reusable filter element that fits 5-1/8” diameter carburetors and throttle bodies
  • Oldsmobile Valve Cover Wire Looms for Small Block Chevy
    Oldsmobile Valve Cover Wire Looms for Small Block Chevy
    x
                

    These die-cast wire looms evenly space four spark plug wires on our 'Olds-style' valve covers (room for 8mm wires, larger if you modify them). These looms completely cover the oil fill/pcv valve grommet holes. You will need to modify the loom (by perhaps boring a large hole) to access the valve cover's 1.22"' hole.

    Acorn nuts are provided to make quick removal of the looms simple and easy (12-1/2" mount centers). The "Rocket" decals are a dark red color. Order one set of looms for one set of valve covers.

    Not for use on stock Oldsmobile valve covers. Designed for use with S/B Chevy valve covers 910-8202.

  • Speedway Small Block Chevy Tall Aluminum Valve Covers
    Speedway Small Block Chevy Tall Aluminum Valve Covers
    x
                

    Clears rocker arm stud girdles or roller rockers. Perfect for welding in breather tubes. Plain, as-cast finish.

    Fits '60-'86 S/B Chevy V8.

  • Speedway S/B Chevy Aluminum Valve Covers w/ Crossover Breather Tube
    Speedway S/B Chevy Aluminum Valve Covers w/ Crossover Breather Tube
    x
                

    Includes two tall cast aluminum valve covers, two shielded breathers, one crossover tube, four stainless clamps and two hoses.

    • Tall valve covers clear most stud girdles or roller rocker arms
    • Washable breather filter elements
    • Fits '60-'86 Small Block Chevy V8
  • BluePrint 496 Big Block Chevy Crate Engine
    BluePrint 496 Big Block Chevy Crate Engine
    x
                

    This 496 B/B Chevy motor is a Speedway Exclusive! Machined and assembled at BluePrint Engines, each engine is dyno tested (includes individual dyno sheet) and comes with a 30 month/50,000 mile warranty. Each crate engine is built to crank out 480 hp @ 5200 rpm and 550 ft.-lbs. @ 4000 rpm. 

    • 480 hp @ 5200 rpm
    • 550 ft.-lbs. @ 4000 rpm
    • 4 bolt main .060" over block
    • Two piece rear seal, passenger side dipstick
    • New cast steel crankshaft externally balanced, 4.250" stroke
    • New 4340 forged connecting rods
    • Hypereutectic flat top pistons
    • 9:1 compression ratio
    • Rotating assembly balanced to within 2 grams
    • New 168 tooth flexplate
    • Chrome valve covers and timing cover
    • Power + Crosswind dual plane aluminum intake manifold
    • Melling high volume oil pump
    • GM cast iron oval port heads
    • Screw-in studs and guide plates
    • Hardened retainers and performance valve springs
    • Hydraulic flat tappet camshaft
    • New HEI distributor
    • 2500 stall converter recommended
    Crate Engine Installation Guide

    Truck Freight Shipping Charges Apply - click here for details.

  • P-Ayr Products 3126 Ardun Set-Up Head and Valve Cover
    P-Ayr Products 3126 Ardun Set-Up Head and Valve Cover
    x
                Why spend the time and cost of cleaning up a 100+lb, back breaking cast  iron block, when you can have one of these 14lb. wonders?  And you  won't believe all the versions and variations that are available.

    This HOT product made of Hi-Tech closed cell polyurethane, is molded directly from original castings.

    Just a few of the features include:

    • Threaded steel inserts in each of the bolt locations (including spark plugs)
    • Includes 2 ea cylinder heads and valve covers
    • Please note that the block is not included and is shown for reference only

     

  • Oldsmobile Valve Covers for Small Block Chevy
    Oldsmobile Valve Covers for Small Block Chevy
    x
                These neat valve covers are designed to look like the early Oldsmobile valve covers but fit late style small block Chevys using center bolt valve cover cylinder heads.  They can also be used with conventional small block cylinder heads by using the valve cover adapter kit listed below.  Order one set of valve covers and one set of looms.

    910-8202: These valve covers have one, 1.22" hole in each cover to accept a PCV valve grommet, or a filler plug. They measure 2.5" from their own gasket surface to the underside of the 'top' of the valve cover. The customer will add the thickness of their valve cover gasket and/or the adapter for early heads, to determine rocker arm clearances. The plain finish valve covers and indeed plain, die-cast aluminum. Not painted.
  • Offenhauser 5042 348-409 Chevy Finned Aluminum Valve Covers
    Offenhauser 5042 348-409 Chevy Finned Aluminum Valve Covers
    x
                

    By Offenhauser. These rugged, cast aluminum Offy valve covers give classic good looks to lots of Hot Rod power plants! Fits 1958-1966 Chevrolet 348 or 409 "W-block" engines in both passenger cars and trucks.

    The sides, ends and fins have all received the "polisher's touch".

    NOTE:   The mounting holes of all Offenhauser valve covers are drilled standard and to factory specifications. Sometimes variations in the heads may require a slight enlarging of the holes.

  • Offenhauser 2727 1954-1957 Ford Y-Block Valve Covers
    Offenhauser 2727 1954-1957 Ford Y-Block Valve Covers
    x
                

    Shine up your Ford Y-Block with a pair of Offy Finned Valve Covers. Fully polished, rugged cast aluminum design provides a better seal while reducing noise and dissipating heat versus stock valve covers.

    Fits 1954-1957 Ford 239, 256, 272, 292, and 312 Y-Block V8.  Who would've thought that the Ford Y-Block V8 engines would be this popular again?

  • Moroso 68385 Tall Aluminum Valve Covers w/ Crossover Breathers
    Moroso 68385 Tall Aluminum Valve Covers w/ Crossover Breathers
    x
                

    Die cast aluminum valve covers with cross-over breather tube, 1-3/8" shielded breathers, hoses, and clamps. Extra tall to clear roller rocker arms, stud girdles, and most shaft rocker assemblies. Features a brilliant hand polished finish. 

    Fits '60-'86 S/B Chevy.

  • Moroso 68370 Tall Aluminum Valve Covers w/ Breathers
    Moroso 68370 Tall Aluminum Valve Covers w/ Breathers
    x
                

    Die cast aluminum valve covers have 1-3/8" shielded breathers on one side only. Extra tall to clear roller rocker arms, stud girdles, and most shaft rocker assemblies. Features a brilliant hand polished finish. 

    Fits '60-'86 S/B Chevy.

  • Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Plain
    Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included. Only uses the end two bolts.

  • World Products 053030 Small Block Ford Windsor Jr Cylinder Head, Bare
    World Products 053030 Small Block Ford Windsor Jr Cylinder Head, Bare
    x
                When it comes to high performance replacements for  factory cast iron heads, World’s WINDSOR JR. has the market covered with  180cc intake runners, plus the 64cc exhausts ports are substantially  larger than OEM Ford heads. Add a highly efficient combustion chamber  design and larger valves and you have big bolt-on power. These heads are  also 50-State emissions legal factory replacements.The WINDSOR series  of heads are the cost-effective choice for serious power from your 302!
    • Material: High density cast iron
    • Valve Seats: Intake (integral), exhaust (hardened)
    • Valve Guides: Integral cast iron
    • Spring Seats: Machined for 1.560" and 1.250"
    • Intake Runner: 180cc, standard port location
    • Exhaust Ports: 64cc, standard location (dual exhaust bolt pattern to accommodate large custom headers)
    • Combustion Chamber: 58cc
    • Spark Plug: 14mm 5/8" .460" reach tapered style, Accel 276 or 276S or equivalent
    • Valve Job: Multi-angle intake and radiused exhaust
    • Valve Cover Rail: Raised
    • Valve Angle: Stock 20°
    • Accessory Bolt Holes: Stock
  • Offenhauser 4039 Valve Cover Engine Breather
    Offenhauser 4039 Valve Cover Engine Breather
    x
                

    This Offy valve cover breathers' superior baffle design insures open air passages at all times - no oil leakage even at extremely high rpm's. It's made of polished cast aluminum and is 5" tall. The base measures 1-3/4" x 4-3/4".  The top of this breather is NOT removeable.  Breather includes a lower baffle plate in addition to featuring internal layer type baffle where one plate is over the other.  It allows the air to breath, but keeps the oil baffled below.

    Includes gasket, bolts and mounting hole template.

    Breather Cut-Away View (GIF)

  • Edelbrock 4185 1965-Up Big Block Chevy Finned Valve Covers
    Edelbrock 4185 1965-Up Big Block Chevy Finned Valve Covers
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. Tall enough to fit over roller rockers. 

    Edelbrock Installation Instructions 

  • Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    Finned 1960-86 Small Block Chevrolet Valve Covers, Plain
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Polished
    Finned 1987-98 Small Block Chevrolet Centerbolt Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included. Only uses the end two bolts.

  • Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    Finned 1960-86 Small Block Chevrolet Valve Covers, Polished
    x
                

    These are a great finishing touch for your small block Chevy engine. These cast aluminum valve covers have the distinctive 'finned' design along with the Chevrolet logo for that traditional look. They do not have any oil fill or pcv holes, so you will have to run an intake with an oil tube.

    Hardware included.

  • Chevy 348/409 Finned Aluminum Valve Covers, Plain
    Chevy 348/409 Finned Aluminum Valve Covers, Plain
    x
                

    W-Series 348 and 409 Chevys just cry out for a set of finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Mounting hardware included
    • Uses stock gaskets (not included)
       
  • GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    GM Performance 19210007 Small Block Chevy 350/330 HP Long Block Engine
    x
                Please view the product's page for more information
            
  • BBC Billet Specialties Streamline Valve Covers
    BBC Billet Specialties Streamline Valve Covers
    x
                Billet Specialties Streamline valve covers offer a  fresh new look for hot rod & custom car valve covers. A single  precision machined raised billet rib sits upon on a die cast aluminum  valve cover to complement any exterior trim cues. All valve covers  include stainless hardware and baffles. Works with 1-1/4" breather/cap  such as our 910-23120.
    • Removable accent trim spear
    • Includes metal baffles
    • Includes grommets
    • 1960-86 B/B Chevy
    • Works with 1-1/4” breathers
    • Choose raw finish or satin black powdercoated
  • Billet Specialties Streamline Chevy Valve Covers
    Billet Specialties Streamline Chevy Valve Covers
    x
                Billet Specialties Streamline valve covers offer a fresh new look for hot rod & custom car valve covers. A single precision machined raised billet rib sits upon on a die cast aluminum valve cover to complement any exterior trim cues. All valve covers include stainless hardware and baffles. Works with 1-1/4" breathers such as our 910-23120. 
    • Removable accent trim spear
    • Includes metal baffles
    • Includes grommets
    • 1960-86 S/B Chevy
    • Works with 1-1/4” breathers
    • Choose raw finish or satin black powdercoated
  • Offenhauser 3416 1953-66 Buick Nailhead Valve Covers
    Offenhauser 3416 1953-66 Buick Nailhead Valve Covers
    x
                

    These rugged Offenhauser aluminum valve covers give classic good looks to lots of Hot Rod power plants! The sides, ends and fins have all received the "polisher's touch". Cast aluminum design also helps reduce noise and dissipate heat versus stock valve covers. One cover includes a hole for a breather/filler cap.

    Fits all 1953-1966 Buick Nailhead V8 engines.

  • Edelbrock 4140 348/409 Chevy Finned Aluminum Valve Covers
    Edelbrock 4140 348/409 Chevy Finned Aluminum Valve Covers
    x
                

    Edelbrock first made these aluminum valve covers in the late 50's and they're still a classic. Mad of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Overall height is 3-13/16". Edelbrock classic valve covers can be machined to accept breathers if desired.

    Made in the U.S.A. 

  • Edelbrock 4160 1960-95 Small Block Ford Finned Valve Covers
    Edelbrock 4160 1960-95 Small Block Ford Finned Valve Covers
    x
                

    Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. Overall height is 3-3/4".

    Made in the USA. 

  • Edelbrock 4145 Chevy 262-400 V8 Valve Covers
    Edelbrock 4145 Chevy 262-400 V8 Valve Covers
    x
                

    Fits small block Chevys from 1959-86. Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers. Overall height is 3-1/2" inches. 

    Made in the U.S.A. 

  • Chevy 348/409 Finned Aluminum Valve Covers, Polishd
    Chevy 348/409 Finned Aluminum Valve Covers, Polishd
    x
                

    W-Series 348 and 409 Chevys just cry out for a set of finned aluminum valve covers. Their unique shape and classic appeal will be the focal point of your hot rod. These valve covers feature raised CHEVROLET script and fins, strong sand-cast aluminum construction, thick walls and gasket flanges that will not bend when bolts are tightened.

    • Strong sand-cast aluminum construction
    • Thick side walls and gasket flanges that will not bend when bolts are tightened
    • Polished finish
    • Mounting hardware included
    • Uses stock gaskets (not included)
       
  • BluePrint 302 Ford Hot Rod Crate Engine w/ Rear Sump Pan
    BluePrint 302 Ford Hot Rod Crate Engine w/ Rear Sump Pan
    x
                Please view the product's page for more information
            
  • 1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    1987-Up Small Block Chevy Tall Valve Covers, Ball Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy center bolt heads. Ball milled top design. Includes baffles and valve cover bolts.

    • Overall height: 3-5/8"
    • Valve cover depth: 3-1/2"
    • One 1-3/16" push in hole per cover
  • Edelbrock 4162 1958-76 FE Ford Finned Valve Covers
    Edelbrock 4162 1958-76 FE Ford Finned Valve Covers
    x
                Edelbrock first made these aluminum valve covers in the late '50s and they're still a classic. Made of heavy-gauge sand-cast , polished aluminum. Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired. They are tall enough to clear roller rockers.  
            
  • Small Block Chevy Tall Aluminum Centerbolt Valve Covers, Polished
    Small Block Chevy Tall Aluminum Centerbolt Valve Covers, Polished
    x
                

    If you're running 1987-up centerbolt heads on your S/B Chevy, you know how hard it is to find valve covers to clear your rocker arms. These polished aluminum covers are 3-3/4" tall. Has two 1-3/8" x 2-3/4" tall baffled breather tubes on one side for oval track racing.

    Bolts not included. Will not clear stud girdles.

  • BluePrint 302 Ford Hot Rod Crate Engine w/ Front Sump Pan
    BluePrint 302 Ford Hot Rod Crate Engine w/ Front Sump Pan
    x
                Please view the product's page for more information
            
  • 1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    1987-Up Small Block Chevy Tall Valve Covers, Flame Milled
    x
                

    Polished cast aluminum valve covers with the look of billet for your late Small Block Chevy centerbolt heads. Flamed top design. Includes baffles and valve cover mounting bolts.

    • Overall height is 3-3/4"
    • I.D. of the breather hole is 1.176"
    • Use with breathers 910-11033 or 550-2068
    • For applications where a PCV valve is needed, use 910-11034
  • Offenhauser 3286 1949-1956 Oldsmobile Valve Covers
    Offenhauser 3286 1949-1956 Oldsmobile Valve Covers
    x
                

    Classic Offy finned valve covers for your Olds "Rocket". Fully polished, rugged cast aluminum design provides a better seal while reducing noise and dissipating heat versus stock valve covers. No provisions for breather/oil fill tube.

    Fits 1949-1956 Oldsmobile 303 and 324 V-8 engines.

  • Ansen 426 Hemi Valve Covers
    $299.99
    Ansen 426 Hemi Valve Covers
    x
                These cast aluminum valve covers are the perfect finishing touch for your 426 Hemi engine.
            
Goto Previous PagePrevious Page
1 2 3