Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"car steel tube" Page 1 of 25

  • Swedged Steel Tube for 5/8 Inch Heim
    From: $9.99
    Product Rating: 4.00 Stars
    Swedged Steel Tube for 5/8 Inch Heim
    x
                These 5/8" swedged steel sleeves have a 7/8" O.D. tube, 0.065 wall, and 5/8" RH and LH fine threads. Available in 1" increments from 4" to 20". IMCA approved. Sold Each.
            
  • Small Block Chevy Tight Fit Headers, AHC Coated
    Small Block Chevy Tight Fit Headers, AHC Coated
    x
                

    These AHC small-block Chevy tight fit headers are the most universal steel tube headers available. These performance headers fit difficult applications where space is limited. They are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks. These ceramic coated headers provide superior performance and durability.

    Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in the tightest of engine compartments and clear all stock motor mounts. Most headers are manufactured from durable 16-gauge tubing and comes complete with gaskets, header bolts and collector reducers.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Round port
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • Armor Hot Coat finish

    Header Dimensions (JPG)

  • Tight-Fit Small Block Chevy Block Hugger Headers, Black
    Tight-Fit Small Block Chevy Block Hugger Headers, Black
    x
                

    These small block Chevy tight-fit headers are the most universal steel tube shorty headers available. They even fit difficult applications where space is limited. The block hugger headers are a favorite for street rods, as well as many 1950's and 1960's cars and vintage trucks.

    • Most tight fit header applications require the use of Accel shorty spark plugs
    • Compact design
    • Will NOT fit angle plug heads
    • Includes reducers, gaskets and bolts
    • 1-5/8" primary tubes
    • 2-1/2" collector
    • Head Flange Thickness:  0.35"

    Header Dimensions (JPG)

  • IMCA Spec Stock Car Upper Control Arm
    IMCA Spec Stock Car Upper Control Arm
    x
                

    IMCA's 2004 rules now allow the stock car class to use spec tubular upper control arms. The stock arms are getting hard to find and don't have the strength of the tubular design. Bolts to your stock mount and accepts stock ball joints.  This control arm is going to have a 1/4" thick plate where the ball joint bolts in.  Mid-size GM metric only.

    • Tube diameter is 1"
    • Wall thickness is 0.092

    Steel cross shaft.  Available for right (passenger side) or left (drivers side).

    Right arm length is 8". Left arm length is 8.5". Cross shaft spacing center to center is 6-7/8".



     

  • 1978-1987 GM Metric Midsize Car Roll Cage Kit
    1978-1987 GM Metric Midsize Car Roll Cage Kit
    x
                Please view the product's page for more information
            
  • Eagle Motorsports Sprint Car Steel Torsion Stop
    Eagle Motorsports Sprint Car Steel Torsion Stop
    x
                

    Eagle Motorsports factory-built component.

    • 1-3/4" tube split and .75" spline count. 
    • Steel construction
    • Includes pinch bolt
  • 1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    New
    1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    x
                Please view the product's page for more information
            
  • Bilstein SNS Series Custom Shock
    Bilstein SNS Series Custom Shock
    x
                Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!
    • Shock of choice for Wissota and UMP racers
    • Digressive valving
    • Nickel plated for rapid heat dissipation
    • World class performance at a SN (Saturday Night) price
    • Bilstein's famous consistent, fade-free performance
    • 46mm (1.81") diameter steel body
    • Steel Cap with Schrader Valve
    • 7 or 9" Stroke
    Designed for, but not limited to:  Modifieds, Late Models, and Sprint Cars.

    Choose:
    • Length - 7 or 9"
    • Rebound Valving - 00-90
    • Compression Valving - 00-90
  • 1965-1989 Small Block Chevy Fullsize Car Long Tube Headers, Stainless Steel
    New
    1965-1989 Small Block Chevy Fullsize Car Long Tube Headers, Stainless Steel
    x
                These long tube stainless steel headers work with both automatic or manual   transmissions in 1964-1989 Chevrolet chassis. Features 1-5/8" primary   tubes, 3" collectors, and fits angled or straight plug S/B Chevy oval   exhaust port heads. Built with surface machined thick steel flanges for a   great seal and mandrel bent mild steel tubing. These headers are a   chassis header and are meant to go inside of the frame rails on the   1965-1989 Chevrolet chassis. 

    Headers come with installation hardware, collector reducers, gaskets and instructions. 

    Header Dimensions Chart (JPEG)

  • Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    Russell Performance 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
    x
                

    Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing). 

    • Connects 3/8" aluminum tube to -6 AN adapters
    • Unique crimp design eliminates tube flaring
    • Not for use with fuel injection

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Polished Stainless Exhaust Tubing
    From: $17.99
    Product Rating: 4.71 Stars
    Polished Stainless Exhaust Tubing
    x
                

    Our fully polished 304 grade stainless steel tubing has a wall thickness of .07". Sizes available are listed by the outside diameter (O.D.) dimension.

    • Available in 1"-3" O.D., sold by the foot
    • Made of 100% polished stainless steel
    • Seamed 15 gauge
    • UPS up to 7'
    • Priced per ft.
    1. If you want us to cut the tubing into smaller lengths than you are ordering, please tell us the lengths of tubing you need by keying that information into our comment area located just above the payment information of Step 2 of the Checkout Process.
    2. If your tubing can be cut in 3 ft. or 4 ft. lengths, the price will be discounted $1.00/ft.
    3. Please keep in mind that the longest piece that can ship by UPS is 7 feet. The longest piece that can ship by truck is 10 feet.
    4. There are no returns on this stainless steel exhaust tubing.

     

  • AFCO 16 Series Custom Racing Shock
    AFCO 16 Series Custom Racing Shock
    x
                Exclusively at Speedway Motors you can now order your custom AFCO Circle/Oval Dirt Track Racing shocks online!
    • 1.68" O.D. aluminum smooth or threaded body
    • Twin tube design for traction in the slickest of track conditions
    • Shim stack technology in lightweight small-body design
    • Smooth body for non-colilover application
    • Rebuildable and repairable
    Choose:
    • Body - Smooth or Threaded
    • Length - 6 or 7"
    • Compression Valving - 0-10
    • Rebound Valving - 0-15   
  • Tight-Tubes Extension Kit, Mild Steel
    Tight-Tubes Extension Kit, Mild Steel
    x
                Using this kit makes the hook-up of your exhaust system a snap! The 2-1/2" diameter, 16-gauge, mandrel-bent tubes curve back at a 90° angle and are offset outward to clear the bellhousing and starter. They drop 10-1/2" from the header flange and they extend backward 17-1/2" after the 90 degree bend. 

    Just trim the length, weld on the 3/8" thick collector flange (included, with gaskets) and you're all set! Works great with any tight-fit headers. Header not included.

  • Standard Tube Flaring Tool, 37 Degree AN
    Standard Tube Flaring Tool, 37 Degree AN
    x
                Please view the product's page for more information
            
  • Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    Inverted Flare Thread Nuts for 3/16 Inch Tubing, 3/8-24
    x
                

    Steel 3/8"-24 IFM thread nuts for 3/16" brake line when double flared to 45°.

  • Exhaust Dump Tubes
    From: $12.99
    Product Rating: 5.00 Stars
    Exhaust Dump Tubes
    x
                Build your own open exhaust with our 16" long tube with end cap and bolts. 2" O.D. inlet. Choose black, chrome or stainless steel finish.
            
  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, AHC Coated
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. These headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers. Plus, the AHC ceramic coating provides additional horsepower gains along with decreased heat soak of other engine components.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Polished ceramic coated finish
    • Includes bolts and gaskets

    Header Dimensions

  • Bilstein SNSL Series Custom Linear Shock
    Bilstein SNSL Series Custom Linear Shock
    x
                Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!
    • Shock of choice for Wissota and UMP racers
    • Linear valving
    • Nickel plated for rapid heat dissipation
    • World class performance at a SN (Saturday Night) price
    • Bilstein's famous consistent, fade-free performance
    • 46mm (1.81") diameter steel body
    • Steel Cap with Schrader Valve
    • 7 or 9" Stroke
    Designed for, but not limited to:  Modifieds, Late Models, and Sprint Cars.

    Choose:
    • Length - 7 or 9"
    • Compression Valving - 0.5-10 (.5 increments)
    • Rebound Valving - 0.5-10 (.5 increments)
    • Bleed - Soft or Mid
  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Black
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • High temp black paint finish
    • Includes bolts and gaskets
    • Note: This header actually goes upward from the head instead of down before dropping over the frame rails. From the top of the head flange to the top of the tubes is approximately 9-1/2". 

    Header Dimensions (GIF)

  • Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Chrome
    Big Block Chevy Fenderwell Headers for 1955-57 Chevy, Chrome
    x
                

    These fender well headers provide the ultimate performance for 396-502 big block Chevy V8s in 1955-57 Chevy car applications. They kick up over the frame rail and exit just at the bottom of the cowl, which makes them perfect for Gasser-style rods and drag cars. Plus, these headers feature long primary tubes that help produce more horsepower and torque than shorter, more compact headers.

    These headers are not for the faint of heart since you must cut the inner fender panels to make them fit, and tire clearance can be a problem on some applications. They may require smaller front tires to avoid contact. The stock emergency brake rod must also be altered. Can be used with most oil filter systems or transmission and starter combinations. The headers are designed to be used with engines in the stock location, not lowered as many kits do, so all '55-'57 cars should check motor mount positioning before ordering.

    • Header flange has 1-13/16” x 1-13/16" port size
    • Will require fender well cutting or alteration
    • 2" primary tube O.D.
    • 32" primary tube length
    • 3-1/2" collector tube O.D.
    • Chrome plated finish
    • Includes bolts and gaskets

    Header Dimensions (GIF)

    Note: This header actually goes upward from the head instead of down before dropping

  • Small Block Chevy and TH350 Auto Trans Mount Option For T Frame Kit
    Small Block Chevy and TH350 Auto Trans Mount Option For T Frame Kit
    x
                

    This T frame kit option includes tubular engine and transmission crossmembers welded into a '23 or '27 T-Bucket frame. Will accept S/B Chevy engine and TH-350 or TH-400 transmissions.

    Note: When ordering this option with a T-Bucket frame kit, the frame will be shipped with these crossmembers welded to it.  As such, this engine/transmission crossmember option must be ordered with a T frame kit.   This is not available separate of a T frame kit.

    If you are interested in the mounts separate of the T frame kit, please see the suggested items found below.

  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    Model A 4-Bar Tube Axle Kit for Ford Spindles, Stainless
    x
                

    Save yourself the searching and confusion with these complete '28-'31 Ford Model A front suspension kits.  Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 

    Requires '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin Tube axle, 3" drop
    • Urethane-bushed 21" long 4-bar assembly
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide cross spring
    • All hardware for assembly

    Front Axle/Suspension Tech Tips (GIF) 

    Note: On 916-39521, the spring and frame bracket are Chrome, not Stainless steel.

     

  • 1964-1974 Big Block Chevy Long Tube Headers, Chrome
    New
    1964-1974 Big Block Chevy Long Tube Headers, Chrome
    x
                
    These chrome headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with:

    • installation hardware
    • collector reducers
    • gaskets 
    • instructions
  • Bilstein SL Series Custom Linear Shock
    Bilstein SL Series Custom Linear Shock
    x
                

    Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!

    These Bilstein mono tube gas shocks feature linear valving. Linear valving offers enhanced predictability over a digressive valved shock. It starts off soft and gradually gets stiffer as the piston speed increases.

    Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel.

    Choose:

    • Length - 7 or 9"
    • Rebound Valving - 0-10 (.5 increments)
    • Compression Valving - 0-10 (.5 increments)
    • Bleed - Soft or Mid
  • Bilstein SZ Series Custom Shock
    Bilstein SZ Series Custom Shock
    x
                

    Exclusively at Speedway Motors you can now order your custom Bilstein shocks online!

    These Bilstein mono tube gas shocks feature digressive valving which delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps.

    Bilstein has set the standard for years in Sprint Cup, Indy Car and Formula 1. Now it is setting the standard for Modifieds, Late Models and Open Wheel! 


    Choose:

    1. Stroke - 7 or 9"
    2. Rebound Valving - 00-90
    3. Compression Valving - 00-90
    4. Gas Pressure - Low, Standard, or High
  • Bilstein F4-BE3-A213-M7 Small Steel Shock w Ends, 6 Inch, Comp 3/Reb 1
    Bilstein F4-BE3-A213-M7 Small Steel Shock w Ends, 6 Inch, Comp 3/Reb 1
    x
                

    These mono-tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. Bilstein has set the standard for years in Winston Cup, Indy Car and Formula 1. Now it's setting the standard for Modifieds, Late Models and Open Wheel.

    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 6" stroke
    • Comp. Length:  11"
    • Extended Length:  17"
  • SuperMaxx 2005-10 Corvette C6 / Z06 Long Tube Headers Only
    SuperMaxx 2005-10 Corvette C6 / Z06 Long Tube Headers Only
    x
                

    Gain up to 16 HP and 16 Ft. Lbs. over factory exhaust! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. These full length headers are designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    For ceramic coating, add Dynatech® Ceramic Coating part number 31179000100. 

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    NOTE: All Non-ZO6 Corvettes came standard w/ 2-1/2" exhaust.

    '05 - '10 C6/Z06 Installation Instructions (PDF)

  • Model A to 1934 Ford Tube Axle Radius Rod Kit, Chrome
    Model A to 1934 Ford Tube Axle Radius Rod Kit, Chrome
    x
                

    Speedways Radius Rod Tube axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. These tube axles require '37-'48 Ford passenger car spindles

    Each kit includes:

    • 48" kingpin-to-kingpin tube axle, 3" dropped
    • 27" hairpin radius rods
    • Forged steel perch bolts
    • Forged steel lower shock mounts (key-slotted design)
    • Spring shackles w/ nylon bushings
    • 31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
    • All hardware for assembly
    • For the CHROME kit, the batwings are plain (bare) steel.

     Front Axle/Suspension Tech Tips (GIF)

  • Stainless Steel AN3 Tube Nuts
    Stainless Steel AN3 Tube Nuts
    x
                Stainless steel AN3 tube nuts.
            
  • 1949-1954 Early Chevy Car Straight Axle
    From: $269.99
    1949-1954 Early Chevy Car Straight Axle
    x
                

    Our plain steel tube axles are universal-fit, and professionally engineered & built. Features welded ends which require 1949-54 Chevy passenger car style spindles. Choose from 44"-50" widths (kingpin center-to-center), or order a custom length to fit your needs. 

    • Axle Tube:  0.250" wall
    • Axle Diameter: 2.00" O.D.
     

    Gasser Build Info (PDF)

  • Dynatech   SuperMaxx 2004-06 Pontiac GTO Long Tube Headers Only
    Dynatech SuperMaxx 2004-06 Pontiac GTO Long Tube Headers Only
    x
                

    Gain up to 31 HP and 23.3 Ft. Lbs. over the **factory exhaust system! Dynatech® SuperMaxx stainless steel exhaust systems are engineered to give your car winning performance both on and off the track. These full length headers are designed to be a direct replacement fit for restrictive factory exhaust and catalytic converter systems, these systems are a great way to get that extra power you are looking for.

    For ceramic coating, add Dynatech® Ceramic Coating part number 31179000100.

    • 3/8" laser-cut and machine-ground flanges for a long-lasting, tight seal
    • Computer-designed collectors for maximum air flow
    • Low-profile four-bolt collectors
    • "OEM-style" triple-layer stainless steel gaskets included for long-term, leak-free service

    **Versus OEM exhaust with cam upgrade.

    '04 GTO Installation Instructions (PDF)

    '05-'06 GTO Installation Instructions (PDF)

  • Bilstein F4BE3C241H0 Small Steel Shock w/ Ends-7 Inch-Comp 6.5/Reb 6.5
    Bilstein F4BE3C241H0 Small Steel Shock w/ Ends-7 Inch-Comp 6.5/Reb 6.5
    x
                

    These mono-tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. Bilstein has set the standard for years in Winston Cup, Indy Car and Formula 1. Now it's setting the standard for Modifieds, Late Models and Open Wheel.

    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 7" stroke
    • Comp. Length:  12"
    • Extended Length:  20"
  • Stainless Steel Single Brake Line Tube Clamps, Bag/12
    Stainless Steel Single Brake Line Tube Clamps, Bag/12
    x
                

    Brake and fuel lines are something you should mount right the first time. Using our stainless steel tube clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".

    Bag of 12 tabs with stainless steel 10-32 button head screws.

  • 1965-1989 Small Block Chevy Long Tube Headers, Plain
    1965-1989 Small Block Chevy Long Tube Headers, Plain
    x
                

    These long tube headers work with both automatic or manual transmissions in 1964-1989 Chevrolet chassis. Features 1-5/8" primary tubes, 3" collectors, and fits angled or straight plug S/B Chevy oval exhaust port heads. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing. These headers are a chassis header and are meant to go inside of the frame rails on the 1965-1989 Chevrolet chassis.

    Headers come with installation hardware, collector reducers, gaskets and instructions. 

    Header Dimensions Chart (JPEG)

  • Bilstein F4-BE3-C237-H0 Small Steel Shock w Ends, 7 Inch, Comp 2/Reb 4
    Bilstein F4-BE3-C237-H0 Small Steel Shock w Ends, 7 Inch, Comp 2/Reb 4
    x
                

    These mono-tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. Bilstein has set the standard for years in Winston Cup, Indy Car and Formula 1. Now it's setting the standard for Modifieds, Late Models and Open Wheel.

    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 7" stroke
    • Comp. Length:  12"
    • Extended Length:  20"
  • Bilstein F4-BE3-C232-H0 Small Steel Shock w Ends, 7 Inch, Comp 4/Reb 2
    Bilstein F4-BE3-C232-H0 Small Steel Shock w Ends, 7 Inch, Comp 4/Reb 2
    x
                

    These mono-tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. Bilstein has set the standard for years in Winston Cup, Indy Car and Formula 1. Now it's setting the standard for Modifieds, Late Models and Open Wheel.

    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 7" stroke
    • Comp. Length:  12"
    • Extended Length:  20"
  • Bilstein Custom 1-5/8 Inch Small Body Steel Shock, 7 Inch
    Bilstein Custom 1-5/8 Inch Small Body Steel Shock, 7 Inch
    x
                
    These mono-tube gas shocks feature the latest development in shock valving technology; digressive valving. This delivers a new level of control by damping slow suspension movements more effectively while not allowing the chassis to be upset by sharp bumps. Bilstein has set the standard for years in Winston Cup, Indy Car and Formula 1. Now it's setting the standard for Modifieds, Late Models and Open Wheel.
    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 7" stroke
    • Custom valving 
  • Bilstein Custom Valve 1-5/8 Inch Small Body Steel Shock, 6 Inch
    Bilstein Custom Valve 1-5/8 Inch Small Body Steel Shock, 6 Inch
    x
                These mono-tube gas shocks feature the latest development in  shock  valving technology; digressive valving. This delivers a new level  of  control by damping slow suspension movements more effectively while  not  allowing the chassis to be upset by sharp bumps. Bilstein has set  the  standard for years in Winston Cup, Indy Car and Formula 1. Now it's   setting the standard for Modifieds, Late Models and Open Wheel. 
    • Use on the front of Modifieds and Sprints
    • Also suitable for Midgets, TQ's, Dwarf Cars, etc.
    • Monotube gas pressure construction
    • Economy price
    • Lightweight
    • Low rod pressure
    • Bilstein's famous consistent, fade-free performance
    • Features one bearing end and one welded end
    • 1-5/8" steel body
    • 6" stroke
    • Custom valving 
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25