Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"car fuel line" Page 1 of 25

  • Professional Products 70026 Powerjection III Fuel Injection System
    Professional Products 70026 Powerjection III Fuel Injection System
    x
                

    This complete stand alone plain electronic fuel injection system supports up to 500 horsepower and is by far the simplest and cleanest aftermarket EFI system available. It's also the easiest to install and tune. The "Adaptive Learning" feature eliminates the necessity for laptop programming and tuning, except on the most radical engines. By "cleanest", we mean it has minimal wiring showing, so for those street rod, street machine, and custom car enthusiasts who object to other EFI systems because of all the engine clutter with wires running everywhere, this is the system they have been waiting for. 

    It utilizes a wideband O2 sensor, a feature missing from many competitive units. It also has a 2.5 BAR MAP sensor which means you can run up to 20 PSI of boost if you have a supercharger or turbocharger. The fuel pump comes with a combination heat sink and mounting bracket. The EMS (engine management system) mounts directly on the throttle body eliminating a major portion of the wiring required. This means you do not have to cut a hole into the firewall. Additionally the MAP sensor is packaged into the throttle body which means one less component cluttering up your firewall and no vacuum hose needed to run from the firewall to the manifold. 

    Click HERE to see what is all included! (Link)

  • Aeroquip Special Application Socketless AN Hose, Blue
    Aeroquip Special Application Socketless AN Hose, Blue
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!

    Construction: AQP elastomer tube, textile braid reinforcement, blue AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

  • Hose Fitting Sizing Chart (GIF)

  • Aeroquip Special Application Socketless AN Hose, Black
    Aeroquip Special Application Socketless AN Hose, Black
    x
                
  • Textile braid reinforcement
  • Low pressure design for use with socketless reuseable fittings only
  • No hose clamp necessary
  • Ideal hose for fuel line applications
  • 50,000 ft of hose in stock!
  • Construction: AQP elastomer tube, textile braid reinforcement, black AQP elastomer cover.

    Application: For gasoline, fuel and lubricating oils, air and water. Not recommended for hydraulic impulse applications and is not approved for air brake, hydraulic brake or power steering applications.

    Operating Range: Max Operating pressure: 250 PSI. Minimum burst pressure: 1000 PSI. Operating Temperature Range -40°F to 300°F. Air not to exceed +250°F and water not to exceed +180°F. Reduced pressure operation allows for temperatures up to 300°F.

    Aeroquip Hose Sizing Guide (GIF)

    Hose Fitting Sizing Chart (GIF)

  • Chrome Braided Hose Covering Kit
    Chrome Braided Hose Covering Kit
    x
                Over 20 feet of stainless steel braided hose cover with chrome plated hose end covers! 

    Easy to install! Easy to clean! Hi-tech detailing at an economy price. Each dress kit contains 3' of vacuum line, 4' of fuel line, 12' of heater hose, and an extra long 4-1/2' of radiator hose sleeving, and 4 shrink sleeves for vacuum lines, 4 fuel line fittings, 4 heater hose fittings, 2 fittings for upper radiator hose.

    Note: The covering is not the actual hose. 

  • Professional Products 10415 Holley 4150 Dual Feed Fuel Line Kit, -8 AN
    Professional Products 10415 Holley 4150 Dual Feed Fuel Line Kit, -8 AN
    x
                These dual feed fuel line kits give you the looks, performance and flexibility your car deserves. Fuel log features -8 AN inlet, 1/8" NPT tapped fuel pressure gauge port, and allows you to have a fuel tank return if needed.

    Fuel line fits Holley 4150 style Double Pumper carburetors with 7/8"-20 inlets.

  • Fuel Filter Mounting Bracket
    Fuel Filter Mounting Bracket
    x
                

    These fuel filter mounting brackets are CNC machined aluminum. Available in 1-3/8", 1-1/2", or 1-3/4" round tubing.

    These brackets are designed to be used with our filters. Hole is 2" inner diameter. 

  • Aluminum Fuel Line, 3/8 Inch O.D.
    From: $10.99
    Product Rating: 4.67 Stars
    Aluminum Fuel Line, 3/8 Inch O.D.
    x
                Where else can you buy aluminum fuel line in the size and length you need? This easy-to-flare and bend tubing will save weight and money. 
    • Use with tube nut couplers, sleeves and 37° flared AN fittings
    • Rated to 250 psi
    • Not recommended for high pressure (brake) applications
    • Available in 10 ft., 20 ft., or 30 ft. coils

    Learn more about flaring lines and how to select proper automotive fittings by reading our tech article. The Principles of Automotive Fittings.

  • Straight Chrome Fitting, 3/8 Inch Hose to 3/8 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 3/8 Inch NPT
    x
                

    These chrome plated push-on brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 3/8" NPT adapter
    • Fuel line hose connector
    • Straight angle
  • Replacement O-Ring for Fuel Filter Ends
    Replacement O-Ring for Fuel Filter Ends
    x
                Replacement O-ring for Speedway 6" and 10" aluminum fuel filters. Compatible with  both methanol and gasoline. Works with stainless and paper filter elements. 

    NOTE: Springs and filter elements shown for assembly reference only. O-rings are sold EACH.

    Fuel Filter Configurations (GIF)

     

     

  • LS1 Fuel Filter/Fuel Regulator Kit
    LS1 Fuel Filter/Fuel Regulator Kit
    x
                

    To make your LS1 swap a little less painful, we put together these 2-in-1 fuel filter and fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805. 

    This kit includes required fuel rail fitting along with the filter/regulator assembly. The EFI fuel regulator pressure is fixed at 58 psi. Hose and additional fittings sold separately.

    • Principal Application:  Chevrolet Corvette (99-04)
    • Style:  Fuel (Complete In-Line) Filter
    • Service:  Fuel
    • Type:  Full Flow
    • Media:  Paper
    • Nominal Micron Rating:  5
  • 97-Style Carburetor Fuel Inlet Fitting, 1/2 Inch-20 to 5/16 Hose, Plain
    97-Style Carburetor Fuel Inlet Fitting, 1/2 Inch-20 to 5/16 Hose, Plain
    x
                

    These fittings adapt 5/16" fuel hose to our 9 Super 7 carb as well as Stromberg 97's and Ford/Holley 94's (all with 1/2"-20 inlet threads).

    Fits:

    • Stromberg 97
    • Ford/Holley 94 with 1/2"-20 threads
    • Speedway 9super7 
  • Aeroquip FBU0600 Starlite Hose, -6 AN
    Aeroquip FBU0600 Starlite Hose, -6 AN
    x
                

    Aeroquip's incredible Starlite racing hose and fittings are up to 45% lighter than stainless steel braided hose and reusable fittings. Starlite hose can be used with fuel, lube and coolants. Working temperature is -45° to +300°F and have a 200 psi working pressure. Works great as a fuel line of gasoline and alcohol fuels.

    NOTE: Please note that the Startlite hose offered here is priced per inch of material. For example, if a 2 foot length is needed, please order quantity 24 inches.

    Startlite hose can be used with either crimp style or reusable hose fittings. Crimp style fitting must be used only with Starlite hose and installed by qualified personnel using an Aeroquip ProCrimp 1380 crimping machine.

    There are only two ways to order these fittings and hose:

    1. Bring or send us your old hose to match.
    2. We will send you the fittings and hose you think will work. You cut the hose to length and send it back to us for crimping.

  • Three Plain 9 Super 7   Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    Three Plain 9 Super 7 Carbs on 1957-86 Small Block Chevy Edelbrock Intake
    x
                

    This tri power kit uses the Edelbrock C-357-B S/B Chevy 3x2 intake with Speedway's 9 Super 7® carbs. It has progressive linkage to give you good driveability and economy, but power when you need it. The manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat riser and offers excellent performance potential. (idle-5500 rpm)

    Kit includes three carbs, the intake, air cleaners, linkage kit, fuel block, fittings and red fuel line. Assembly required. Fits 1957-1986 Chevy 262-400 c.i.d. small-block Chevys.

    9 Super 7® Linkage Instructions (PDF)

    Note: Not applicable to an HEI based distributor system due to a clearance issue. This system must be used in conjunction with a small diameter based distributor.

    The 9Super7 Carb  makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required to do so with our kits is a Uni-Syn syncing tool and a little patience. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both prima

  • Straight Chrome Fitting, 5/16 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 5/16 Inch Hose to 1/4 Inch NPT
    x
                

    These socketless chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb connector
    • 5/16" Hose to 1/4" NPT adapter
    • Straight angle
  • Replacement Spring for Fuel Filter
    Replacement Spring for Fuel Filter
    x
                

    Replacement spring for Speedway 6" and 10" fuel filters. Compatible with both methanol and gasoline. Works with stainless and paper filter elements.

    NOTE: O-rings and filter elements shown for assembly reference only. Springs are sold EACH.

  • MSD 2225 In-Line Hi-Pressure Fuel Pump
    MSD 2225 In-Line Hi-Pressure Fuel Pump
    x
                

    Most modern engines have a hi-pressure fuel pump located in the gas tank. If you are transplanting one of these engines into your hot rod, what are you going to do for a fuel pump? This MSD pump can be mounted on the frame and can put out up to 43 gph at 40 psi or 39 gph at 80 psi.

    • Flows 43 gph (282 lb/hr) gasoline @ 40 psi and 12 volts/5.4 amps 
    • Supports most multiport EFI systems up to 500 horsepower
    • Mounts in-line (out of the fuel tank)
    • Roller vane pump mechanism is extremely resistant to clogging and jamming
    • Has 3/8” hose barb inlet and 5/16" hose barb outlet
    • Made in the USA
  • LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, Black
    LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, Black
    x
                
    • Direct replacement for OEM fuel rail and return line fittings in late-model EFI pressure side application
    • Exclusive SAE quick disconnect threaded aluminum retaining cap for ease of installation and positive engagement under high pressure
    • 37° sealing angle provides a positive seal at maximum operating pressures
    • Black anodized finish
  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 3/8 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 3/8 NPT
    x
                

    These chrome plated brass adapter fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" push-on hose to 3/8" NPT fuel line connector
    • 90 Degree angle
  • Universal Electric 4-7 PSI Fuel Pump
    Universal Electric 4-7 PSI Fuel Pump
    x
                

    Inexpensive solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" npt inlet and outlet and includes two barbed hose fittings to connect to 5/16" hose.

    This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump.

    910-11520 Instructions (PDF) 

  • LS1 Complete Fuel Delivery Kit
    $169.99
    Product Rating: 4.40 Stars
    LS1 Complete Fuel Delivery Kit
    x
                

    To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

    This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

    Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

  • Fuel Pump/Fuel Filter Housing Tube Clamp
    Fuel Pump/Fuel Filter Housing Tube Clamp
    x
                
    • Holds any 2.075" diameter pump or a 2" diameter fuel filter housing securely to frame
    • Clamps to 1.25" and 1.375" tubing sizes
    • Perfect for Carter or Walbro style pumps and 2" diameter fuel filters
    • Billet aluminum construction
  • Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb end
    • 3/8" Hose to 1/4" NPT adapter
    • Straight angle line connector

     

  • Chrome 90   Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    Chrome 90 Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
    x
                

    These chrome plated brass fittings are the perfect finishing touches for your fuel system. They are made of brass and feature a chrome plated finish for a show car shine.  All fittings are male hose barb to male pipe thread.

    • Male pipe threads to hose barb ends
    • 3/8" Hose to 1/4" NPT
    • 90 Degree angle
  • Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 90 Degree
    Steel -6 AN Fitting for Aeroquip FC300 High Pressure Hose, 90 Degree
    x
                

    Steel power steering hose end fitting for use with Aeroquip FC300 high pressure hose. 90° elbow -6 AN swivel fitting easily assembles onto -6 AN hose with a bench vise and/or wrenches.  Steel hose ends are reusable.

    • -6 AN female to push-on adapter
    • 90° elbow fuel line hose connector
    • 37° angled sealing surface guarantees a positive anti-leak seal

    Fitting Thread Size Chart (GIF)

    FC300 Assembly Chart (GIF)

  • Purple Fuel Filter with Shut-Off, 10 Inch, -10 AN
    Purple Fuel Filter with Shut-Off, 10 Inch, -10 AN
    x
                

    Each of these filters features a Teflon sealed fuel shutoff valve on the inlet side and an easy-to-clean, replaceable 45-micron stainless steel filter element.

    NOT compatible with ethanol (E85).

  • Holley 4150 Double Pumper Chrome Dual-Feed Fuel Line
    Holley 4150 Double Pumper Chrome Dual-Feed Fuel Line
    x
                Eliminate ugly fittings and adaptors with this  chrome dual feed line with mandrel bends and  3/8" hose barb inlet  providing excellent fuel flow. Fuel log fits Holley 4150-style  mechanical secondary Double Pumper (center hung float bowl) 4-BBL  carburetors with 9-1/4" centers. 

     

  • Speedway Aluminum Fuel Log for Holley Carburetor
    Speedway Aluminum Fuel Log for Holley Carburetor
    x
                

    This fuel log ensures adequate fuel pressure to carburetor and helps eliminate fuel starvation problems. Fuel pressure is regulated after carburetor has been supplied, and not before. Must use return fuel line to take full advantage of benefits.

    Features -8 AN inlet and two -8 AN outlets. Threaded 3/4" NPT (plugged) on back that can be used for a return line. Carburetor fuel line also has 1/8" NPT outlet for fuel pressure gauge (fittings sold separately). 

    • 9-1/4" from fitting to fitting
    • Standard Holley spacing is 9-1/4"
  • Fuel Safe Fuel Level Indicator Stick
    Fuel Safe Fuel Level Indicator Stick
    x
                

    Fuel level indicator stick ideal for checking fuel level in all types of fuel tanks from sprint tanks to off road racing cells. Unique design allows you to insert fuel level stick into any fuel tank, fuel enters the clear fill tube via a one way check valve in the bottom of the stick. Withdraw the stick from the tank and check your fuel level against pre-set fuel level markings on the stick. Once you've determined the fuel level in the tank, simply dump the clean gas back in the tank.

    • No Mess!
    • No Spill!
    • Works in low light conditions!
    • 36" length Comes complete with adjustable fuel level markers that can be calibrated to your system
    • Endorsed by 3 time World of Outlaws Sprint Car Champion Sammy Swindell
  • Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -6 AN
    Aeroquip Straight Full Flow Swivel Hose End Coupler Fitting, -6 AN
    x
                

    This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings. Available in swivel with a red and blue anodized finish. For use with Aeroquip AQP® Stainless Steel Racing Hose and Aeroquip StartLite® light-weight hose (part number 617306).

    • -6 AN female to push-on style adapter
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Works great with custom fuel lines
    • Available in Red/Blue corrosion resistant finish

    Straight full flow ends come in sizes of AN4, AN6, AN8, AN10, AN12, and AN16.

    Fitting Thread Application Chart (GIF)

  • Stainless Steel Fuel Filter Element for 10 Inch Filter
    Stainless Steel Fuel Filter Element for 10 Inch Filter
    x
                

    Replacement 10" stainless filter elements to fit our 2" filter bodies. 45 micron. Designed for race car use only. Compatible with gasoline. NOT compatible with ethanol (E85).

    NOTE: Spring and O-rings are not included with filter element and are shown for assembly reference only.

    Fuel Filter Configurations (GIF)

  • Black Socketless Straight Push-On Hose End Fitting, -6 AN
    Black Socketless Straight Push-On Hose End Fitting, -6 AN
    x
                

    Black socketless push-on hose end fittings will give your engine compartment the look you are after. Straight fittings in multiple sizes.  For use with 37 degree flared ends.

    • -6 AN female to push-on hose barb adapter
    • Straight style fuel line hose connector
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Available in a Black anodized finish

    AN Thread Size Guide (GIF)

    Fitting Thread Size Guide (GIF)

     

  • Stainless Steel Braided Hose, -12 AN
    From: $19.99
    Stainless Steel Braided Hose, -12 AN
    x
                

    This stainless steel braided hose can be used for low pressure applications like fuel, water, air or oil. Not to be used for brake or power steering applications.

    Note: This hose is not compatible with E85 or other Ethanol blended fuels.

    Fitting Thread Application Chart (GIF)

  • Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
    Russell 641600 LS/Hemi Complete EFI Fuel System Retrofit Kit, Red/Blue
    x
                

    This Russell Performance electronic fuel injection system kit provides a complete fuel system for GM LS-series and Chrysler Hemi engine swaps in muscle cars, street rods and off-road vehicles. These kits include an in-line Edelbrock electric fuel pump, regulator/fuel filter assembly, fuel pump relay and wiring assembly, fifteen feet of Russell ProFlex hose, plus an assortment of traditional red and blue AN hose ends, adapters and mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM LS-series and Dodge 5.7L Hemi engine swaps into older non-EFI vehicles
    • Can support up to 600 hp at 40 psi
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
  • Professional Products 10102 Street Rod Fuel Filter
    Professional Products 10102 Street Rod Fuel Filter
    x
                

    This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet. 

    For carbureted systems only. Flows up to 90 GPH @ 7 PSI and filters particles down to 10 microns.

    910-11770 Instructions (PDF) 

  • Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    Edelbrock 8126 Performer Carb Fuel Line Kit, 3/8 Inch Hose Barb Inlet
    x
                

    These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.

    Fuel Line Kit Instruction Sheet (PDF)

  • Aeromotive 12601 10 Micron Replacement Fuel Filter Element
    Aeromotive 12601 10 Micron Replacement Fuel Filter Element
    x
                

    Commonly the most overlooked component in a fuel system, filter neglect can be the most costly. If not cleaned or replaced regularly, filter elements can become clogged resulting in reduced fuel flow, engine performance and ultimately, fuel pump or even worse, engine damage. By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance.

    Aeromotive recommends annual inspection and service of filter elements. This includes replacing 10-micron fabric elements. Severe duty applications or newly installed systems may require more frequent maintenance.

    Note: 10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor. Fabric elements not suitable for use in E85 or alcohol applications.

  • LS1 Fuel Filter/Fuel Regulator Only
    LS1 Fuel Filter/Fuel Regulator Only
    x
                

    To make your LS1 engine swap a little less painful, we stock this 2-in-1 fuel filter/fuel pressure regulator assembly. This non-adjustable fuel regulator has a fixed pressure at 58 psi. Hose and additional fittings sold separately.

    • Principal Application:  Chevrolet Corvette ('99-'04)
    • Style:  Fuel (Complete In-Line) Filter
    • Service:  Fuel
    • Type:  Full Flow
    • Media:  Paper
    • Nominal Micron Rating:  5
  • Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
    Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
    x
                These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
    • 340 Stealth Fuel Pump
    • Supports up to:
      • 700 HP EFI Supercharged
      • 1000 HP Carbureted Supercharged
    • Black anodized hanger assembly
    • (3) ORB-06 Ports – Supply, Return, Vent
    • Fuel resistant baffle / basket (Includes: Foam and Bladder)
    • Universal high flow pre-pump filter
    • Modular design can be cut to height to fit almost any fuel tank
    • EFI or Carbureted
    • Turbine pump mechanism increases durability.
    • Must be used with a return style system
    • In-tank use only

    Fuel Injected Systems Specs and Recommendations Chart (Link)

    Carbureted Systems Specs and Recommendations Chart (Link)

  • Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    Russell Performance 641605 LS/Hemi EFI Fuel System Retrofit Kit
    x
                

    This fuel pump kit provides a complete electronic fuel system for GM LS-series and Chrysler 5.7 Hemi engine swaps in muscle cars, street rods and off-road vehicles. Kit features an Edelbrock EFI fuel pump, regulator/filter, relay, Russell Pro Flex hose, an assortment of silver and black AN hose end fittings, and all mounting hardware. When using with OEM fuel tank sending units, an additional adapter to -6 male AN is required.

    • For GM/Chevy LS and Chrysler 5.7 Hemi engine swaps into older non-EFI vehicles
    • Includes Edelbrock Electric Fuel Pump # 3594
    • Includes Edelbrock Fuel Pressure Regulator
    • Returnless Fuel System
    • Supports up to 450 HP
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25