Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"camaro upper control arm bushings" Page 1 of 1

  • 1971-79 GM Polyurethane Upper Control Arm Bushings
    1971-79 GM Polyurethane Upper Control Arm Bushings
    x
                

    Installing polyurethane front control arm bushings is one of the simplest ways to improve your car's handling and cornering capabilities. These are direct replacements for your GM vehicle's stock rubber bushings, but are more durable and decrease suspension flex for optimum performance.

    These black bushings are sold in sets of four to fit two upper control arms.

    Fits:

    • 1974-79 Impala/Caprice
    • 1974-1977 Chevelle & Monte Carlo
    • 1975-1979 Nova
    • 1971-1979 Camaro
    • 1975-1979 Firebird

     

  • 1967-74 GM Polyurethane Upper Control Arm Bushings
    1967-74 GM Polyurethane Upper Control Arm Bushings
    x
                

    Installing polyurethane front control arm bushings is one of the simplest ways to improve your car's handling and cornering capabilities. These are direct replacements for your GM vehicle's stock rubber bushings, but are more durable and decrease suspension flex for optimum performance.

    These black bushings are sold in sets of four to fit two upper control arms.

    Fits:

    • 1967-1972 Chevelle & Monte Carlo
    • 1968-1974 Nova
    • 1967-1969 Camaro
  • 1970-81 Camaro Upper Racing Control A-Arm
    1970-81 Camaro Upper Racing Control A-Arm
    x
                This upper control arm for 1970-1981 Camaro is designed to be used with the stock mount. Available in 8", 8-1/4", 8-1/2", 8-3/4", 9", 9-1/4", 9-1/2". This control arm requires the use of a K6024-style ball joint, which is equivalent a 1963-’71 Chevy pickup style upper ball joint. It will have a 7 degree tapered stud and therefore, the stock Camaro spindle must be reamed to fit the pickup ball joint.

    Cross shaft mount bolts center on center. Measures 7-3/4". The arms are symmetrical.

    Note: This control arm does not use a stock Camaro ball joint, (all) of the ball joints that we offer require reaming stock spindle.

    Note: Our "length" reference refers to the distance from the center of the ball joint to the centerline of the cross shaft. The "stock" length of a Camaro upper A-arm is 9-1/4".

     

  • AFCO 200-1003 Low Friction 1970-73 GM Front Suspension Kit
    AFCO 200-1003 Low Friction 1970-73 GM Front Suspension Kit
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    Fits

     

    • 1970-72 GM F-Body
    • 1973 GM A-Body 

     

  • Global West CTA-79A 1967-69 Camaro/Firebird Tubular Upper Control Arms
    Global West CTA-79A 1967-69 Camaro/Firebird Tubular Upper Control Arms
    x
                Please view the product's page for more information
            
  • AFCO 200-1004 Low Friction 1974-79 GM Front Suspension
    AFCO 200-1004 Low Friction 1974-79 GM Front Suspension
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    Fits

     

    • 1974-79 GM F-Body
    • 1975-77 GM A-Body
    • 1975-79 GM X-Body 

     

  • AFCO 200-1001 Low Friction 1966-74 GM Front Suspension
    AFCO 200-1001 Low Friction 1966-74 GM Front Suspension
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 
    Fits
    • 1966-72 GM A-Body
    • 1967-69 GM F-Body
    • 1968-74 GM X-Body 
  • Global West CTA-79L 1967-69 Camaro/Firebird Lower Tubular Control Arms
    Global West CTA-79L 1967-69 Camaro/Firebird Lower Tubular Control Arms
    x
                

    Global West's control arms are built for a specific purpose, to bring current technoloty to early model applications. Their tubular lower arms are perfect for stock or performance suspension upgrades. Both arms are supplied with ball joints, bump stops, control arms bushings, and a innovative rotating spring cushion. 

    The cushion serves two purposes-to isolate and properly index the coil spring. Even if you trim your coil spring in order to lower the car, the lower spring cushion simply rotates for proper re-index. The control arms also provide additional header tube clearance, require no frame modifications and are pre-assembled for your convenience. 

    Will not work with Heidt's spindles but will work with stock or 2" dropped spindles that measure 7" across the ball joint area. 

  • AFCO 20032-2LF Low Friction Upper Ball Joint, Extended Length
    AFCO 20032-2LF Low Friction Upper Ball Joint, Extended Length
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!  It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

     

  • AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
    AFCO 20037LF K5108 Low Friction GM Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
    • Improves weight transfer
    • Frees up suspension for more consistent, repeatable chassis tuning
    • Removes suspension rigidity and allows shock and spring to have more precise wheel control
    • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
    • Provides more accurate set-ups during vehicle scaling
    • Meets or exceeds standard ball joint strength
    • Stock appearing
    • Lower input steering efforts and faster steering wheel return

    Checking Ball Joint Wear (PDF)

  • AFCO 20032LF K5208 Low Friction GM Upper Ball Joint
    AFCO 20032LF K5208 Low Friction GM Upper Ball Joint
    x
                

    AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

    It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension.

    Checking Ball Joint Wear (PDF)

    For 1/2" raised pivot point use 106-200322LF

    See Application tab for corresponding vehicle models.  

  • Speedway G-Comp 1967-69 Camaro Tubular Control Arms
    Speedway G-Comp 1967-69 Camaro Tubular Control Arms
    x
                If you want a superior set of tubular control arms for your '67-'69  Camaro, we've got you covered. These control arms are specifically  designed  to plant the tires to the ground with improved geometry for  modern tire design and increased adjustability for street/track  performance. Comes complete with bushings, ball  joint, bump stop, and  are powdercoated black. 
    • Kit includes both upper and lower control arms
    • Complete kit with all new components
    • Improved geometry for modern tire design
    • Increased adjustability for street/track performance
    • Strong and lightweight with polyurethane bushings
  • Garage Sale - AFCO Low Friction 1970-72 GM F Body Front Suspension Kit
    Garage Sale
    Garage Sale - AFCO Low Friction 1970-72 GM F Body Front Suspension Kit
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

  • Garage Sale - AFCO Low Friction 1973 GM A-Body Front Suspension
    Garage Sale
    Garage Sale - AFCO Low Friction 1973 GM A-Body Front Suspension
    x
                

    This Low Friction kit from AFCO frees up your front suspension and allows it to work the way it was designed. The kit includes low friction ball joints, lightweight lower arm bushings with nylon inserts, and solid steel upper arm bushings. Due to the superior materials used, this kit promotes front end alignment during usage (unlike O.E. soft rubber bushings). Perfect or ProTouring, SCCA, and Drag Racing cars.

    Each kit contains: (4) ball joints, (4) upper control arm bushings, and (4) lower control arm bushings.

    • Assembled kits for easy ordering
    • No modifications necessary-simply choose your application and go
    • Reduced suspension "stiction"
    • Increases ability to transfer weight
    • Precision machining promotes front end alignment during usage (unlike O.E. rubber bushings)
    • Kits contain lightweight lower bushings (nylon inserts for reduced weight and less friction) 

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS