Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"building steel bend" Page 1 of 3

  • Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.

    • Four 48" Straight Pipes
    • Four 90° Pipes
    • Four 45° Pipes 
    • Four 180° U-Bends
  • Mild Steel Exhaust U-Bend, 2 Inch
    Mild Steel Exhaust U-Bend, 2 Inch
    x
                

    16-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Stainless Steel Exhaust Bend Kit, 2-1/4 Inch
    Stainless Steel Exhaust Bend Kit, 2-1/4 Inch
    x
                

    Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately.

    • Four 48" Straight Pipes
    • Four 90 Degree Pipes
    • Four 45 Degree Pipes 
    • Four 180 Degree U-Bends
  • Stainless Steel Exhaust U-Bends, 1-3/4 Inch O.D.
    Stainless Steel Exhaust U-Bends, 1-3/4 Inch O.D.
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

  • Stainless Steel Exhaust U-Bends, 2-1/4 Inch O.D.
    Stainless Steel Exhaust U-Bends, 2-1/4 Inch O.D.
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

    Size listed is outside diameter.

  • Stainless Steel Exhaust U-Bends, 1-7/8 Inch O.D.
    Stainless Steel Exhaust U-Bends, 1-7/8 Inch O.D.
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

  • Stainless Steel Exhaust U-Bends, 2 Inch O.D.
    Stainless Steel Exhaust U-Bends, 2 Inch O.D.
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

    Size listed is outside diameter.

  • Mild Steel Exhaust U-Bend, 1-1/2 Inch
    Mild Steel Exhaust U-Bend, 1-1/2 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    3" Bend Radius 

    Size listed is outside diameter.

  • Stainless Steel Exhaust U-Bends, 1-5/8 Inch O.D.
    Stainless Steel Exhaust U-Bends, 1-5/8 Inch O.D.
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

     

  • Stainless Steel Exhaust U-Bends, 1-1/2 Inch O.D.
    Stainless Steel Exhaust U-Bends, 1-1/2 Inch O.D.
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

  • Stainless Steel Exhaust U-Bends, 2-1/2 Inch
    Stainless Steel Exhaust U-Bends, 2-1/2 Inch
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

    Size listed is outside diameter.

  • Stainless Steel Exhaust U-Bends, 2-1/8 Inch
    Stainless Steel Exhaust U-Bends, 2-1/8 Inch
    x
                

    Mandrel bent 304 stainless steel U-bends. For building your own headers or replacing a bent or damaged tube. Tubing is annealed to A269 condition, which prevents work hardening during the construction and fabrication process.

    Size listed is outside diameter.

  • Mild Steel Exhaust U-Bend, 2-1/2 Inch
    Mild Steel Exhaust U-Bend, 2-1/2 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Combo Exhaust Bend, 2-1/2 Inch Diameter
    Combo Exhaust Bend, 2-1/2 Inch Diameter
    x
                These mild steel combo exhaust bends are perfect for building or repairing headers.  They feature smooth mandrel bends with a bend radius of 7" and an outside diameter of 2-1/2". 
    • Mild steel
    • For building or repairing headers
    • 16-gauge (0.06" thick)
    • 2-1/2" O.D

  • Mild Steel Exhaust U-Bend, 1-3/4 Inch
    Mild Steel Exhaust U-Bend, 1-3/4 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Lever Tube Bender, 3/16 Inch Brake Line
    Lever Tube Bender, 3/16 Inch Brake Line
    x
                Lever type tubing bender features a 10" handle that gives plenty of  leverage to make smooth, professional, 5/8" radius bends in 3/16"  stainless or mild steel brake line tubing. The graduated scale of the  hard steel die permits accurate, repeatable bends time after time.
            
  • Mild Steel Exhaust U-Bend, 1-5/8 Inch
    Mild Steel Exhaust U-Bend, 1-5/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Mild Steel Exhaust U-Bend, 1-7/8 Inch
    Mild Steel Exhaust U-Bend, 1-7/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Mild Steel Exhaust U-Bend, 2-1/8 Inch
    Mild Steel Exhaust U-Bend, 2-1/8 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Deluxe Street Stock Car Roll Cage Kit
    Deluxe Street Stock Car Roll Cage Kit
    x
                Please view the product's page for more information
            
  • Mild Steel Exhaust U-Bend, 2-1/4 Inch
    Mild Steel Exhaust U-Bend, 2-1/4 Inch
    x
                

    18-gauge mandrel bent mild steel U-bends for building your own headers or replacing a bent or damaged tube.

    Size listed is outside diameter.

  • Combo Exhaust Bend, 2 Inch
    $14.99
    Product Rating: 4.85 Stars
    Combo Exhaust Bend, 2 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 2" O.D.
            
  • 3rd Generation Hydraulic Round Tubing Bender & 5 Die Set
    3rd Generation Hydraulic Round Tubing Bender & 5 Die Set
    x
                

    Using advanced computer design methods and mass production, Speedway Motors brings you a superior tube bender at a better price. This eight ton hydraulic jack bends up to .134 mild or .096 Chromoly round tubing. Tubing bender weighs less than 50 lbs and comes with a complete set of 5 aluminum dies.

    Make a roll bar or roll cage like a pro, makes pipe bending easy -- you won't find a better bender anywhere! This rugged design will bend 1", 1-1/4", 1-1/2", 1-5/8" and 1-3/4" round tubing on a 7" radius.

    • Maximum bend is 90 degrees
    • Incremental marks cast into dies makes it easy to reproduce bends
    • Machined steel followers

    910-84116 Instructions (PDF)

  • Combo Exhaust Bend, 1-3/4 Inch
    Combo Exhaust Bend, 1-3/4 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-3/4" O.D.
  • Combo Exhaust Bend, 1-1/2 Inch
    Combo Exhaust Bend, 1-1/2 Inch
    x
                
    Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-1/2" O.D.
  • Truck Street Stock Roll Cage Kit
    Truck Street Stock Roll Cage Kit
    x
                All truck roll cage kits are pre-bent 1-3/4" diameter .104 wall HREW 1020 mild steel tubing. We have found that the tubing manufacturers are quite inconsistant on actual wall thickness. Some .095" wall tubing was coming in at .088". That's why Speedway uses .104" wall tubing, so that manufacturer inconsistencies will not leave you with an illegal cage! Tubing is pre-notched where needed for easy assembly. Some notching is required. 

    The kit also includes one package of 25 gussets. Instructions are also included with the kit.

    We Pay the Freight! 
    Complete frame kits are shipped freight paid with a common carrier within the 48 states (not in Alaska or Hawaii). They have to be shipped to a business address to receive free freight. It can be shipped to a residential address for a $60 fee. Please be sure to provide a business name and address in the shipping field if going to a business.

    Cage kits will ship within approximately 2-3 days. 

    Please specify in the "Comments" Section of your order the year, make and model of your truck. Full size trucks only.

    916-73070 Instructions (PDF)

  • Combo Exhaust Bend, 1-5/8 Inch
    Combo Exhaust Bend, 1-5/8 Inch
    x
                Mild steel combo exhaust bends for building or repairing headers. 16-gauge tubing with 1-5/8" O.D.
            
  • 1964-1974 Big Block Chevy Long Tube Headers, Chrome
    New
    1964-1974 Big Block Chevy Long Tube Headers, Chrome
    x
                
    These chrome headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with:

    • installation hardware
    • collector reducers
    • gaskets 
    • instructions
  • 1978-1987 GM Metric Midsize Car Roll Cage Kit
    1978-1987 GM Metric Midsize Car Roll Cage Kit
    x
                Please view the product's page for more information
            
  • Combo Exhaust Bend, 1-7/8 Inch
    Combo Exhaust Bend, 1-7/8 Inch
    x
                Mild steel combo exhaust bends for building or  repairing headers. 16-gauge tubing with 1-7/8" O.D.
            
  • Assorted Exhaust Bends, 1-1/2 Inch
    Assorted Exhaust Bends, 1-1/2 Inch
    x
                Approximately 18 ft. with assorted bends of  16-gauge mild steel exhaust tubing. Use this handy kit to repair or  build your own headers.  Each kit will vary as to the number and type of  bends.
            
  • Assorted Exhaust Bends, 1-5/8 Inch
    Assorted Exhaust Bends, 1-5/8 Inch
    x
                Approximately 18 ft. with assorted bends of  16-gauge mild steel exhaust tubing. Use this handy kit to repair or  build your own headers.  Each kit will vary as to the number and type of  bends.
            
  • Assorted Exhaust Bends, 1-3/4 Inch
    Assorted Exhaust Bends, 1-3/4 Inch
    x
                Approximately 18 ft. with assorted bends of  16-gauge mild steel exhaust tubing. Use this handy kit to repair or  build your own headers.  Each kit will vary as to the number and type of  bends.
            
  • Assorted Exhaust Bends, 1-7/8 Inch
    Assorted Exhaust Bends, 1-7/8 Inch
    x
                Approximately 18 ft. with assorted bends of  16-gauge mild steel exhaust tubing. Use this handy kit to repair or  build your own headers.  Each kit will vary as to the number and type of  bends.
            
  • Steel 105 Degree Hose Connectors
    Steel 105 Degree Hose Connectors
    x
                

    These 105° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • Steel 90 Degree Hose Connectors
    Steel 90 Degree Hose Connectors
    x
                

    These 90° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

    Choose hose diameter (I.D.) needed.

  • Steel 135 Degree Radiator Hose Connectors
    Steel 135 Degree Radiator Hose Connectors
    x
                

    These 135° bend steel tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.

  • 1965-1989 Small Block Chevy Fullsize Car Long Tube Headers, Stainless Steel
    New
    1965-1989 Small Block Chevy Fullsize Car Long Tube Headers, Stainless Steel
    x
                These long tube stainless steel headers work with both automatic or manual   transmissions in 1964-1989 Chevrolet chassis. Features 1-5/8" primary   tubes, 3" collectors, and fits angled or straight plug S/B Chevy oval   exhaust port heads. Built with surface machined thick steel flanges for a   great seal and mandrel bent mild steel tubing. These headers are a   chassis header and are meant to go inside of the frame rails on the   1965-1989 Chevrolet chassis. 

    Headers come with installation hardware, collector reducers, gaskets and instructions. 

    Header Dimensions Chart (JPEG)

  • 1964-1974 Big Block Chevy Long Tube Headers, Stainless Steel
    New
    1964-1974 Big Block Chevy Long Tube Headers, Stainless Steel
    x
                
    These stainless steel headers are just the ticket for you B/B Chevy guys. They feature 2" primary tubes, 3-1/2" collectors, and must be used with original big block motor mounts to fit properly. Built with surface machined thick steel flanges for a great seal and mandrel bent mild steel tubing.

    Headers come with:

    • installation hardware
    • collector reducers
    • gaskets
    • instructions
  • 1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    New
    1965-89 Small Block Chevy Fullsize Car Long Tube Headers, Chrome
    x
                Please view the product's page for more information
            
Goto Previous PagePrevious Page
1 2 3