Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"brake pedal and master cylinder" Page 1 of 4

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    910-29977 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1
    Wilwood Reverse Swing Triple Master Cylinder Pedal, 6.2:1
    x
                

    Wilwood's racing brake/clutch pedal assemblies are the result of years of hands-on experience, input from racers and chassis builders, and design, material selection and manufacturing techniques that result in durable, lightweight components. They incorporate ergonomics without sacrificing performance, and practical requirements without adding weight.

    Tri reverse mount master cylinder pedal assembly has both clutch and brake pedals with balance bar for dual brake master cylinders.

    • Combines the brake & clutch pedals into one unit
    • Positions M/C inside the firewall away from engine heat
    • Aluminum frame & arm construction
    • Steel pivots & mounting studs
    • Anti-skid pedal pads
    • Clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias
    • Bias can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustment

    910-29974 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
    x
                

    Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.

    Note: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.

    916-31926 Instructions (PDF) 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Speedway Disc Brake Residual Valve, 2 PSI, Purple
    Speedway Disc Brake Residual Valve, 2 PSI, Purple
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A residual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 2 PSI residual valve is installed inline between the master cylinder and disc brake calipers to keep 2 PSI of residual pressure at the caliper after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

    If your master cylinder is located below the floorboard, installing a 2 PSI residual valve is highly recommended. If your master cylinder is mounted on the firewall, a residual valve is generally not needed because gravity will provide a natural residual pressure within the brake line.

    Our residual pressure valve features a distinctive purple anodized finish with 1/8" NPT port at each end. Use 2 PSI residual valves for disc brake applications only.

  • Dual Feed Master Cylinder
    $36.99
    Product Rating: 4.36 Stars
    Dual Feed Master Cylinder
    x
                

    Dual feed master cylinder with 2 bolt flange style mount. Use with Speedway brake pedal assemblies. This cylinder is similar to those used on mid-70's Fords (Mustang, Fairlane/LTD, etc. with disc front/drum rear).

    • Mounting Bolt Holes:  3/8" or 10mm 
    • 7 1/4" long without the pushrod, add 2" for the pushrod
    • 3" wide from the outside of the reservoir to the edge of the outlets
    • Mounting flange is 4" wide
    • Master cylinder is also 3-7/16" tall without a cap
    • Included push rod is threaded 3/8"-24 (fine thread).
    • If you need a yoke for the pedal hook-up, use this Forged Steel Yoke.
    • Push rod boot included.

    Uses 3/8"-24 female inverted flare outlets. If plumbing with AN 3 lines, you will need two each of these AN to IFM Adapters.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

  • Universal Fit Firewall Mount Brake Pedal Assembly
    Universal Fit Firewall Mount Brake Pedal Assembly
    x
                Use this bracket when you want to install a firewall mounted master cylinder pedal. These universal brackets mount both the pedal and master cylinder. Works with manual master cylinders (with 3-1/4" bolt centers) or power boosters (with 3-3/8" x 3-3/8" bolt pattern). Made from laser-cut 1/4" thick steel plate. 
    • Brake pedal assembly
    • Mounts neatly on your firewall
    • Universal fit
    • 6:1 pedal ratio
    • Bronze bushings provide smooth operation
    • Zinc plated finish for corrosion resistance
    • Made in the U.S.A.
    • Pedal pad sold separately
    Dual brake/clutch master cylinder pedal assemblies are also available under p/n 91631992.
  • 1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder Combo
    x
                

    When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.

    • Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
    • Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
    • Measures 14-1/4" from firewall bracket to end of master cylinder.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    x
                

    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad.

    Swing mount has a 7.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    Detailed Schematic of Pedal 

  • Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    Wilwood Forward Swing Dual Master Cylinder Brake Pedal
    x
                

    This popular pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • The swing type pedal has a ratio of 7:1
    • Includes balance bar
    • This popular pedal mounts two brake master cylinders with a bias balance bar

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly, 5.1:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 5.1:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    US Brake Tri Reverse Mount Master Cylinder Pedal Assembly Kit, 6.2:1
    x
                

    This Wilwood pedal/US Brake master cylinder assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    • 6.2:1 pedal ratio 
    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction
    • Each master cylinder has a single 1/8" NPT outlet
    • Specify m/c bore sizes needed (3/4", 7/8", 1")

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Dual Reverse-Mount Master Cylinder Pedal Kit
    Dual Reverse-Mount Master Cylinder Pedal Kit
    x
                

    This Wilwood pedal mounts two US Brake master cylinders with a bias balance bar and positions the master cylinders inside the firewall and away from engine heat. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable (at right) for quick on-track adjustments.

    • US Brake Master Cylinders
      • External return spring maintains positive pedal feel, prolongs pad life
      • Polished smooth bores
      • One-piece alumiunum construction

    6.25:1 pedal ratio. Each master cylinder has a single 1/8" NPT outlet. Specify m/c bore sizes.

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Dual Master Cylinder Floor Mount Pedal
    US Brake Dual Master Cylinder Floor Mount Pedal
    x
                

    This combo pairs a Wilwood floor mount pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    US Brake Master Cylinders

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Has a 6:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", 1".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    Wilwood Reverse Swing Mount Dual Master Cylinder Pedal Assembly
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio. Master cylinders have single 1/8" NPT outlets.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    910-29972 Instructions (PDF)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • US Brake Swing Mount Dual Master Cylinder Pedal
    US Brake Swing Mount Dual Master Cylinder Pedal
    x
                

    This combo pairs a Wilwood pedal assembly with two US Brake master cylinders. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7:1 pedal ratio. Specify m/c bore sizes in Comments box of your Shopping Cart at Checkout: 3/4", 7/8", or 1".

    • External return spring maintains positive pedal feel, prolongs pad life
    • Polished smooth bores
    • One-piece alumiunum construction

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-3342 Reverse Swing Triple Master Cylinder Pedal, 6.25:1
    Wilwood 340-3342 Reverse Swing Triple Master Cylinder Pedal, 6.25:1
    x
                

    This assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 6.25:1 ratio on both clutch and brake pedal.

  • Wilwood 340-4828 Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    Wilwood 340-4828 Reverse Swing Triple Master Cylinder Pedal, 5.1:1
    x
                

    This assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside the firewall and away from engine heat. It features all aluminum frame and arm construction with steel pivots, mounting studs, and anti-skid pedal pads. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 5.1:1 ratio on both clutch and brake pedal.

  • Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    Wilwood Dual Master Cylinder Floor Mount Pedal Assembly
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The floor mount pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 

    • Floor mount assembly
    • Has a 6:1 pedal ratio
    • Includes brake balance bar

    910-29976 Instructions (PDF)

    910-29976 Specs Sheet

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • 1941-48 Ford Car Master Cylinder with Pedal Bracket
    1941-48 Ford Car Master Cylinder with Pedal Bracket
    x
                

    Bolt a non-boosted master cylinder to your 1941-1948 Ford passenger car frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female.  

    Kit includes master cylinder, pedal assembly and hardware.

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

    NOTE: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an automatic transmission. 

  • 1935-40 Ford Master Cylinder with Pedal Bracket
    1935-40 Ford Master Cylinder with Pedal Bracket
    x
                

    Bolt a non-boosted master cylinder to your 1935-1940 Ford car and 1/2 ton pickup frame's original "X" member. The dual feed, 1" bore master cylinder works with 4-wheel disc brakes or disc/drum brake setups. Both fluid outlets are 3/8" -24 inverted flare female.  

    Kit includes master cylinder, pedal assembly and hardware.

    Brake System Builder's Tip (Link)

    NOTE: Will NOT work in conjunction with the factory clutch pedal. Intended for use with an automatic transmission. 

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Wilwood 340-1285 Floor Mount Dual Master Cylinder Brake Pedal
    Wilwood 340-1285 Floor Mount Dual Master Cylinder Brake Pedal
    x
                

    This is one of racing's most popular pedals for mounting two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. With a 6.00 to 1 pedal ratio.

    Pedal Dimensions (Link)

    835-3401285 Instructions (PDF)

  • 1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    1933-1934 Ford Frame Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1933-1934 Ford. The master cylinder has been remanufactured and is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31933 Instructions (pdf) 

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.  

  • Dual Feed Master Cylinder w/ Stainless Sleeve
    Dual Feed Master Cylinder w/ Stainless Sleeve
    x
                

    Brake fluid can ruin your master cylinder in just a few years. Stop the problem by using a stainless steel sleeved master cylinder. Our new sleeved dual feed master cylinder will work with most disc/drum combinations.

    • No more pitting in the bore
    • 1" bore
    • Popular 3/8"-24 inverted flare ports
    • 3/16" brake line will screw right in

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood 340-1287 Dual Master Cylinder Swing Mount Pedal
    Wilwood 340-1287 Dual Master Cylinder Swing Mount Pedal
    x
                

    This popular swing mount pedal mounts two brake master cylinders with a bias balance bar. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments.

    Has a 7.00 to 1 pedal ratio.

    835-3401287 Instructions (PDF)

  • 1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    1937-39 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1937-1939 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31939 Instructions (PDF)

  • 1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    1940-1948 Chevy Car Master Cylinder & Frame Rail Mount
    x
                

    The ideal combination for a clean and simple 1940-1948 Chevy passenger car brake system. The 1" bore master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The bracket can be bolted or welded to the left frame rail (boxed or stock).

    Kit includes a dual feed master cylinder, frame bracket, steel pedal arm that can be easily modified for driver comfort and hardware.

    916-31948 Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Disc Brake Residual Pressure Valve, 1/8 NPT, 2 PSI
    Disc Brake Residual Pressure Valve, 1/8 NPT, 2 PSI
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A redesidual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 2 PSI residual valve is installed inline between the master cylinder and disc brake calipers to keep 2 PSI of residual pressure at the caliper after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

    If your master cylinder is located below the floorboard, installing a 2 PSI residual valve is highly recommended. If your master cylinder is mounted on the firewall, a residual valve is generally not needed because gravity will provide a natural residual pressure within the brake line.

    Valve is 1/8" NPT male on the inlet side and 1/8" NPT female on the outlet side. Use 2 PSI residual valves for disc brake applications only.

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection.  

  • Universal Fit Firewall Mount Clutch/Brake Pedal Assembly
    Universal Fit Firewall Mount Clutch/Brake Pedal Assembly
    x
                

    Use this bracket when you want to install a firewall mounted master cylinder pedal. These universal brackets mount the pedal, brake master cylinder and clutch master cylinder. Works with manual brake master cylinders (with 3-1/4" bolt centers) and clutch master cylinders (with 2-1/4" bolt centers). Made from laser-cut 1/4" thick steel plate.

    • Brake and clutch pedal assembly
    • Mounts neatly on your firewall
    • Universal fit
    • 6:1 pedal ratio
    • Bronze bushings provide smooth operation
    • Zinc plated finish for corrosion resistance
    • Made in the U.S.A.
    • Pedal pads sold separately
    Brake-only pedal assemblies are also available under p/n 91631991.
  • TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    TCI 600-6570-56 Under-Floor Power Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Power brake kit has a 7” brake booster and matching master cylinder.

    • Overall length from front of pedal arm to back of master cylinder is 25-1/2"
    • Overall width from frame rail to right side of booster is 11-1/8"
    • Height from top of pedal assembly to bottom of booster is 6-3/4"
    • Top of pedal assembly to center of pedal pad mounting hole is 8-1/2"

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

     

  • Speedway Drum Brake Residual Valve, 10 PSI, Purple
    Speedway Drum Brake Residual Valve, 10 PSI, Purple
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A redesidual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 10 PSI residual valve is installed inline between the master cylinder and drum brake wheel cylinders to keep 10 PSI of residual pressure at the wheel cylinder after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

    Our residual pressure valve features a distinctive purple anodized finish with a 1/8" NPT port at each end. Use 10 PSI residual valves for drum brake applications only.

     
    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection.  
  • Speedway Disc Brake Residual Valve, 2 PSI, Polished
    Speedway Disc Brake Residual Valve, 2 PSI, Polished
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A redesidual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 2 PSI residual valve is installed inline between the master cylinder and disc brake calipers to keep 2 PSI of residual pressure at the caliper after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal.

    If your master cylinder is located below the floorboard, installing a 2 PSI residual valve is highly recommended. If your master cylinder is mounted on the firewall, a residual valve is generally not needed because gravity will provide a natural residual pressure within the brake line.

    Our residual pressure valve features a fully polished finish with a 1/8" NPT port at each end. Use 2 PSI residual valves for disc brake applications only.

     
    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection.  
  • AFCO 2012-2055 Master Cylinder Boot
    AFCO 2012-2055 Master Cylinder Boot
    x
                

    Master cylinder replacement/repair parts for AFCO single piston aluminum master cylinders.

    Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.

    Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
    This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.

     

  • AFCO 2012-2052 Master Cylinder Wire
    AFCO 2012-2052 Master Cylinder Wire
    x
                

    Master cylinder replacement/repair parts for AFCO single piston aluminum master cylinders.

    Racer Note: Master cylinder bores are built with close tolerances. Stroking the master cylinder dry can cause damage to the internal rubber seals causing leaks, soft pedal, and lack of pressure. Never clean a master cylinder with carburetor cleaner or similar products as they will cause seal damage.

    Racer Note: When rebuilding brake master cylinders and calipers, always lubricate internal parts with brake assembly fluid before installation.
    This will keep seals and o-rings from becoming damaged by dry cylinder walls and pistons.

     

  • Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    Wilwood 340-5181 Reverse Swing Mount Brake Pedal
    x
                

    Dual reverse pedal mounts two brake master cylinders with a bias balance bar. Wilwood's clevis and pivot pin balance bar provide smooth and accurate settings of the brake pedal bias. It can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. 6.25 to 1 pedal ratio.

    • Positions master cylinders inside the firewall away from engine heat
    • Aluminum frame and arm construction
    • Steel pivots and mounting studs
    • Anti-skid pedal pad

    835-3405181 Instructions (PDF)

  • 1955-59 Chevy Pickup Master Cylinder Adapter
    1955-59 Chevy Pickup Master Cylinder Adapter
    x
                

    This bracket allows you to replace that old single reservoir master cylinder with a modern dual reservoir unit. Bracket bolts to the frame and re-uses your original brake pedal. Designed for all disc and drum brake systems.

    Accommodates master cylinders with bolt center spacing of 2-7/8" to 3-3/8".

    916-31947 Instructions (PDF)

  • Drum Brake Residual Pressure Valve, 1/8 NPT, 10 PSI
    Drum Brake Residual Pressure Valve, 1/8 NPT, 10 PSI
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A redesidual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 10 PSI residual valve is installed inline between the master cylinder and drum brake wheel cylinders to keep 10 PSI of residual pressure at the wheel cylinder after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal. 

    Valve is 1/8" NPT male on the inlet side and 1/8" NPT female on the outlet side. Use 10 PSI residual valves for drum brake applications only.

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection.  

  • TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    TCI 600-6571-56 Under-Floor Manual Brake / Hydraulic Clutch Assembly
    x
                

    Want to put a manual transmission in your street rod?  These universal pedal assemblies offer a clean, simple way to mount your brake master cylinder and hydraulic clutch master cylinder to the frame, under the floor.  Kits include a bracket and pedals, plus new brake and clutch master cylinders.  Maximum brake pedal throw is 6", clutch pedal is 5.6".

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection

  • Speedway Drum Brake Residual Valve, 10 PSI, Polished
    Speedway Drum Brake Residual Valve, 10 PSI, Polished
    x
                

    Ever had problems with a spongy pedal or slow, unresponsive brakes? If so, you may need a residual pressure valve installed in your brake line. A redesidual valve acts like a one-way or check valve to maintain brake system pressure to eliminate the problems of a spongy pedal. This 10 PSI residual valve is installed inline between the master cylinder and drum brake wheel cylinders to keep 10 PSI of residual pressure at the wheel cylinder after the brake pedal is released. This ensures that you will have a high, firm pedal next time you press the brake pedal. 

    Our residual pressure valve features a polished aluminum finish with a 1/8" NPT port at each end. Use 10 PSI residual valves for drum brake applications only.

     
    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection.  
  • Wilwood and Speedway IMCA Mod Pedal Kit
    Wilwood and Speedway IMCA Mod Pedal Kit
    x
                Our affordable Speedway pedal kit comes with everything you'll need for your IMCA racer.

    Kit includes:
    • Tri Master Pedal Assembly
    • Wilwood Aluminum Master Cylinders: 3/4", 7/8" & 1"
    • Brake Bias Cable
    • Side Mount Throttle Pedal

    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.

  • Wilwood High Volume Aluminum Master Cylinder
    Wilwood High Volume Aluminum Master Cylinder
    x
                

    Wilwood high-volume aluminum master cylinders have the highest fluid capacity of any integral reservoir design. With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands. More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long events. With 1-7/16" of piston travel, there is plenty of margin when used with large four or six piston calipers.

    An internal slosh baffle guarantees a constant fluid supply to the bore chamber during hard cornering, acceleration and braking. This unique baffle also eliminates aeration into the reservoir from return fluid that can occur during brake release and bleeding procedures.

    • Die-cast from high-grade aluminum
    • Heavy-duty internal piston springs provide fast retraction for immediate release and positive fluid transfer without the need for cumbersome external pushrod springs
    • Pedal feel is improved, piston retraction is guaranteed, fluid recovery is quicker and the bleeding process is simplified
    • Formed steel lids, heavyweight bail wires and bellows type gaskets keep the fluid in and the moisture out with correct pressure balancing during fluid displacement
    • 1/8"-27 NPT fluid port

    835-260676 Instructions (PDF)

    Learn more about selecting th

Goto Previous PagePrevious Page
1 2 3 4