Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Loading...
Products
Searched For:

"brake lines kit" Page 1 of 8

  • Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    Speedway Universal Brake System Builder Kit - Lines, Fittings, Valves
    x
                Please view the product's page for more information
            
  • T-Bucket Stainless Brake Line Kit
    T-Bucket Stainless Brake Line Kit
    x
                

    Complete your '23 T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.

    Notes: Does not work with '27 T chassis.  Also of note, due to unlimited rear axle brake combinations, this kit will not include rear axle housing brake lines, hoses, or fittings.  The kit will include the AN style brake hose to transfer from the rear crossmember to the housing.  The chassis builder/installer will then need to continue the brake line system from that point on to both rear wheels with necessary brake fitting hardware as needed.

    Due to the different brakes and caliper combinations, this kit will NOT include caliper/wheel cylinder fittings.

    Learn more about the proper uses of residual and proportioning valves and by reading our tech article. Brake System Selection.  

  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 20 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 4-Hose, 40 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for for independent rear axles (IRS). Kit includes two 20 foot coils of 3/16" stainless steel line, seventeen -3 AN tube nuts, seventeen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, four -3 AN 18" braided stainless hoses, and three 3/8" bulkhead nuts.

    617-8545 Instructions (PDF)

    NOTE: These kits are de

  • DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    DOT Braided Stainless Brake Hoses, 1978-88 GM, 10mm-1.5
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Mild Steel -3 AN Brake Line Kit
    Mild Steel -3 AN Brake Line Kit
    x
                

    This brake line kit bridges the gap between our stainless steel -3 AN kit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3 AN fittings to plumb your brake lines. 

    Since we don't know what calipers and master cylinder you will be using, these fittings are sold separately.

     
    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 40 Ft. Tubing
    x
                Please view the product's page for more information
            
  • Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    Stainless Steel -3 AN Brake Line Kit, 3-Hose, 20 Ft. Tubing
    x
                

    Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.

    Why settle for the anodized aluminum fittings offered by other companies? We start with 3/16" stainless steel tubing of 304 grade (rated at 6000 psi) that is double annealed to allow easy flaring. Then, we offer a variety of fittings made of 303 grade semi-polished stainless for the most corrosion resistant line kit in the industry! Not all fittings are polished, but with a little elbow grease you can have beautiful brake lines.

    Designed for conventional live axle rear suspensions. Includes a 20 foot coil of 3/16" stainless steel line, nineteen -3 AN tube nuts, nineteen -3 AN tube sleeves, two -3 AN bulkhead tees, six -3 AN to 1/8"NPT adapters, two 90° -3 AN to 1/8" NPT adapters, one -3 AN straight bulkhead fitting, two -3 AN to 1/8" NPT female thru-frame fittings with stainless jam nuts, three -3 AN 18" braided stainless lines, and three 3/8" bulkhead nuts.

    617-8530 Instructions 

  • Mild Steel 45 Degree Inverted Flare Brake Line Kit
    Mild Steel 45 Degree Inverted Flare Brake Line Kit
    x
                

    You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares.

    This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 AN brake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3 AN male adapters, six 3/8"-24 IFF to 1/8" NPT male bracket adapters, and twenty 3/8"-24 inverted flare nuts.

    Brake System Builder Tip (GIF) 

    Note: Needed in addition to this kit will be the adapters to connect the master cylinder to 3/8"-24 inverted flare brake line and the fittings to connect your calipers (or wheel cylinders) to the -3 AN braided lines.

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings

  • Rubber Front Brake Lines & Fitting Kit, 7/16-20
    Rubber Front Brake Lines & Fitting Kit, 7/16-20
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy-to-install brake line tabs and clips.

    • 18" lines including fittings
    • 3/8"-24 IFF and 7/16"-20

    Lines are 18" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    Rubber Front Brake Lines & Fitting Kit, 10mm-1.5
    x
                

    Stop guessing which banjo fittings go with which brake lines. With this kit you get two rubber front brake lines, two banjo bolts with seals, and a pair of easy to install brake line tabs and clips.

    • 15" length including fittings
    • 3/8"-24 IFF and 10mm-1.5
    • For 1978-1988 GM Calipers

    Lines are 15" in length. Features 3/8"-24 IFF at the chassis fitting to accept 3/16" brake line.

  • Speedway IMCA Mod Brake Kit
    $489.99
    Speedway IMCA Mod Brake Kit
    x
                Our affordable Speedway brake system comes with everything you'll need for your IMCA racer.

    Kit includes:
    • GM Metric Clamp-on Calipers
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolt
    • 7/16" to AN4 Banjo Fitting
    • 7/16"-20" Banjo Bolt
    • 18" Brake Line w/ Straight
    • 26" Brake Line w/ 90° End
    • 3/8"-24 Female to AN4 Fitting
    • Lightweight Brake Line Kit
  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 58-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3950 Instructions (PDF)

  • Jet Mod Brake Kit
    $699.99
    Jet Mod Brake Kit
    x
                This kit is patterned after the setup that Johnny "The Jet" Saathoff used to drive to FOUR IMCA National Championships. Comes with everything that you'll need to set up your IMCA racers braking system.

    Kit includes:
    • 7/16"-20" RH & LH Metric Calipers
    • Wilwood Polymatrix D Brake Pads
    • GM Caliper Slide Bolts
    • GM Metric Clamp-on Caliper Bolts
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Bolts
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fitting
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
    • RH & LH Front Caliper Bracket
  • Speedway External Bleeder Kit for GM Hydraulic Throwout Bearing 91025610
    Speedway External Bleeder Kit for GM Hydraulic Throwout Bearing 91025610
    x
                

    These quality bleeder kits are designed for use with our GM Stock Clutch Hydraulic Throwout Bearing (91025610).  They feature all lines, adapters, and fittings needed to successfully bleed your throwout bearing. 

    Kit includes:

    • 1/8" NPT bleeder
    • AN4 male to 1/8"NPT adapter fitting
    • 12" AN-4 stainless steel straight brake line
  • T56 Release Bearing Remote Bleeder
    T56 Release Bearing Remote Bleeder
    x
                

    Bleeding a hydraulic system with the stock 97+ GM T56 bleeder isn't something to look forward to.  Crawling under the car and trying to keep brake fluid off new paint is nearly impossible!  This bleeder kit replaces the bleeder screw on your LS1 F-Body, 04-06 Pontiac GTO, or C5 Corvette throwout bearing, and allows you to remotely bleed the system away from the tight quarters of the transmission tunnel.  

    Our lines range from 6-48" allowing you to select the length that will work best for your project. Part number 910-31309 can be used as a bracket to attach the end of the bleeder hose to a firewall or floor pan.

    Fits T-56 throwout bearings off the following applications:

    • 98-02 LS1 F-Body
    • 97-04 C5 Corvette
    • 04-06 Pontiac GTO

    Read more about bleeding hydraulic lines in our tech article, How To Bleed Your Brake Lines.

  • -2 AN Brake Line Kit, Sprint Car 3 Wheel Kit
    -2 AN Brake Line Kit, Sprint Car 3 Wheel Kit
    x
                

    940-31853 - Add the 3-wheel kit to your 2-wheel system to supply a third caliper. Kit includes bulkheads, nuts, and a 20" line with AN3 female fittings. 

     

  • Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
    x
                

    This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.

    Two 16" front lines with 7/16" banjos on one end and 3/8-24 IFF on the "frame" end.

    Banjo bolts and crush washers are included. 

    One 14" line for the rear axle with 7/16-24 IFF on the "frame" end, and a handy "block" on the axle end. The "block" has 3/8-24 IFF on two sides, and a 7/16" hole on top so that it can be bolted to the rear axle.
  • Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    Deluxe Disc Brake Kit, 1955-1964 Chevy Full-size Car, Stock Spindle
    x
                

    These kits allow you to mount front disc brakes on your 1955-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series). Front disc brakes provide a significant improvement in braking performance versus the drum brakes your old Chevy came with. This disc brake kit works with stock, drum brake spindles only - it does not work with 2" drop spindles. Kit will work with 14" wheels intended for disc brake applications, as well as most 15" (or larger) wheels.

    Rotors are 11" diameter with 5 on 4-3/4" bolt pattern and calipers have 7/16"-20 inlets. This kit will increase track width 7/8" per side or 1-3/4" total when installed. 

    • 11" Rotors
    • 5 on 4-3/4" - bolt pattern
    • Metric calipers
    • Calipers mount behind axle (rearward)
    • Will work with 14" & larger wheels intended for use with disc brakes
    • Bearings, pads, brackets included
    • Seals and hoses
    • Hardware included
    • Increases trac-width 7/8" per side
    • For '55-'64 Chevy fullsize cars. 

    910-31911 Instructions (PDF)

     

  • Lightweight Nylon Brake Line Kit
    Lightweight Nylon Brake Line Kit
    x
                

    Kit includes 25 ft. of nylon brake line with all of the necessary fittings. Save time and weight. Will do most modifieds or sprint cars.

    • 3/16" O.D. line
    • 1900 psi burst pressure
    • 1/8" NPT fittings
    • Not for street use
  • US Brake Steel Brake Line Kit
    US Brake Steel Brake Line Kit
    x
                Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines. 
            
  • Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    Chevy Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                Please view the product's page for more information
            
  • Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    Lokar EC-80FU Floor/Dash Mount Emergency Brake Cables
    x
                

    Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.

    Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit is complete with cable bracket and spacers. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit".

    See Application tab for model-specific information.

    EC80FU E-Brake Cable Instructions (PDF) 

    Connector Cable Installation Instructions (PDF) 

  • Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    Dual Outlet Master Cylinder Stainless Steel Dual Brake Line Kit
    x
                

    This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

    • Features tight 90° bends at the master cylinder end
    • Both ends of both lines are 3/8"-24 inverted flare nuts
    • The longer of the two lines measures app. 12" from the bend to the end
  • Even-Flow Caliper Line Kit
    $34.99
    Even-Flow Caliper Line Kit
    x
                

    This kit equalizes brake pressure to each side of your inboard calipers. That gives you even pad wear and a more consistent pedal. 

    For calipers with a 1/8" npt port in each side of caliper.

    AN 3 inlet.  

  • Dirtworks 4-Link Brake Kit
    $589.99
    Dirtworks 4-Link Brake Kit
    x
                This Dirtworks 4-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.

    Kit includes:
    • RH & LH Brake Brackets
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D GM Metric Pads
    • Slide Bolt GM Caliper
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Fittings
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fittings
    • 19" Brake Line w/ 90° Ends
    • 26" Brake Line w/ 90° Ends
    • Mini Brake Gauge Panel
  • Dirtworks 2-Link Brake Kit
    $609.99
    Dirtworks 2-Link Brake Kit
    x
                This Dirtworks 2-link brake kit comes with the calipers, brackets, and gauges necessary to set up and install a brake system on your IMCA modified racer.

    Kit includes:
    • RH & LH Brake Brackets
    • 7/16"-20 RH & LH Metric Calipers
    • Wilwood Polymatrix D GM Metric Pads
    • Slide Bolt GM Caliper
    • Caliper Brackets
    • 7/16" to AN4 Banjo Fittings
    • 7/16"-20 Banjo Fittings
    • Lightweight Brake Line
    • 3/8"-24 Female to AN4 Fittings
    • 19" Brake Line w/ 90 Degree Ends
    • 26" Brake Line w/ 90 Degree Ends
    • Mini Brake Gauge Panel
  • Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    Ford Front Axle Steering & Brake Kit, 48 Inch Axle
    x
                

    Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  

    • For 48" kingpin-to-kingpin axles
    • Traditional steering arm for left front wheel NOT included with Traditional steering kit
    • Available with 5x4.5" or 5x4.75" hubs

    Spindle Identification Guide (GIF)

  • T56 Hydraulic Clutch Line Kit, 25 Inch
    T56 Hydraulic Clutch Line Kit, 25 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • T56 Hydraulic Clutch Line Kit, 36 Inch
    T56 Hydraulic Clutch Line Kit, 36 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    DOT Braided Stainless Brake Hose, 1969-77 GM, 7/16-20
    x
                

    DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.

    • Stainless steel braid over Teflon® hose
    • Reduces volumetric expansion of brake lines
    • Reduces brake fade
    • Less susceptible to debris than rubber line
  • Mityvac MV8020 Vacuum Brake Bleeding Kit
    Mityvac MV8020 Vacuum Brake Bleeding Kit
    x
                

    Trigger type vacuum pump comes complete with all necessary hardware. Makes bleeding your breaking system by yourself an ease. Vacuum brake bleeding kit also works great for siphoning or transferring fluids from tanks and reservoirs.

    Includes:

    • Hand vacuum/pressure pump
    • 4.5 oz. fluid reservoir bottle with fluid transfer and storage lids
    • (2) Tapered bleed screw adapters
    • (2) Universal bleed screw adapters
    • 1/4" ID x 1-1/2" long connection tube
    • 1/4" ID x 24" long connection tube
    • User manual

    910-83895 Instructions (PDF)

    Read more about bleeding brakes in our tech article, How To Bleed Your Brake Lines

  • Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    Gasser Straight Axle, Chevy Spindle and Brake Kits, 56-1/2 Hub-to-Hub
    x
                

    These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

    Gasser Info (PDF)

    Note: Wilwood brakes increase hub-to-hub width by 1/2".

    910-3948 Instructions (PDF)

  • T56 Hydraulic Clutch Line Kit, 48 Inch
    T56 Hydraulic Clutch Line Kit, 48 Inch
    x
                

    You have finally found that T56 6-speed to put behind your Chevy V-8 and now are ready to hook up the release bearing. We have this neat kit that allows you to hook it up to a common Wilwood master cylinder. Our AN3 braided stainless steel hose is available in three lengths: 25", 36" and 48" lengths.

    You will also want to buy the banjo fitting kits and the Wilwood master cylinder.

    NOTE: These lines are for Corvette and GTO specific T56 six-speeds only. Transmissions out of F-Body Camaro/Firebirds will need AN4 lines.

  • Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    Disc Brake Kit, 1978-88 GM Caliper to Early Ford Spindle, 5 on 4-1/2 Inch
    x
                

    Easily installs 11" rotors and the 1978-up GM Metric calipers to your 1937-48 Ford passenger car and 1937-47 1/2 ton Ford spindles. No machine work needed. This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for street rods based on 1932-48 Fords. Uses Ford/Mopar wheel bolt pattern of 5 on 4-1/2".

    910-31945 Instructions (PDF)

  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x
                

    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.

    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.

    Note:  Brake kit will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.

    910-31958 Instructions (PDF)

  • Goodridge SP670-02 -2 AN Brake Line Kit, Sprint Car 2 Wheel System
    Goodridge SP670-02 -2 AN Brake Line Kit, Sprint Car 2 Wheel System
    x
                

    940-31850 - Simply zip-tie this Sprint car AN2 soft line system in place of your hard-line to increase brake pressure, eliminate threaded joints, and add durability. A direct replacement consisting of AN3 female ends and coated braided line. Outfit your third caliper with the additional line and fitting kit. Works with or without a residual valve.

  • AFCO Nylon Brake Line Kit
    $34.99
    Product Rating: 5.00 Stars
    AFCO Nylon Brake Line Kit
    x
                25 ft. of line with all necessary fittings. Save time and weight. Will do most modifieds or sprint cars. 1/8" NPT fittings. 1900 psi burst pressure. Not for street use. 
            
  • Eagle Motorsports 2-1/2 Inch Sprint Racing Front Axle Kit, 50 Inch Long
    Eagle Motorsports 2-1/2 Inch Sprint Racing Front Axle Kit, 50 Inch Long
    x
                

    These all new complete front axle kits from Eagle Motorsports come equipped with everything needed to assemble a Sprint car front end.  They feature Winters aluminum spindles and hubs, chrome powder coated 4130 chromoly tie rods, carbon fiber brake line guards, and Wilwood calipers.

    Kit includes:

    • Eagle 50" long x 2 1/2" O.D. plain finish front axle
    • Eagle two tone black steering arms
    • Winters aluminum spindles/steel snout
    • 5.5" kingpins
    • 2 thrust bearing kits
    • Chrome powder coated 4130 chromoly tie rod
    • 2 FK steel heims, jam nuts
    • Carbon fiber brake line guard
    • Winters black aluminum front hubs
    • Complete LF brake kit with Wilwood caliper
    • All necessary hardware
    Assembly required.
Goto Previous PagePrevious Page
1 2 3 4 5 ... 8